February 2014 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sat Feb 1 00:11:11 EST 2014
Ending: Fri Feb 28 23:19:47 EST 2014
Messages: 7921

• change kmalloc into vmalloc for large memory allocations   'gregkh at linuxfoundation.org'
• [PATCH v5 05/16] ARM: use a function table for determining instruction interpreter action   Jon Medhurst (Tixy)
• [PATCH v5 07/16] ARM: Remove use of struct kprobe from generic probes code   Jon Medhurst (Tixy)
• [PATCH v5 16/16] ARM: Remove uprobes dependency on kprobes   Jon Medhurst (Tixy)
• [PATCH v5 15/16] ARM: add uprobes support   Jon Medhurst (Tixy)
• [PATCH v5 00/16] uprobes: Add uprobes support for ARM   Jon Medhurst (Tixy)
• [PATCH RESEND] ARM: mcpm: Make all mcpm functions notrace   Jon Medhurst (Tixy)
• [PATCH RESEND] ARM: mcpm: Make all mcpm functions notrace   Jon Medhurst (Tixy)
• [PATCH v6 07/14] ARM: Remove use of struct kprobe from generic probes code   Jon Medhurst (Tixy)
• [PATCH v6 07/14] ARM: Remove use of struct kprobe from generic probes code   Jon Medhurst (Tixy)
• [PATCHv2] arm64: Align CMA sizes to PAGE_SIZE   Laura Abbott
• [PATCHv2 0/2] Remove ARM meminfo   Laura Abbott
• [PATCHv2 2/2] arm: Get rid of meminfo   Laura Abbott
• [PATCH v2 1/5] drivers: of: add initialization code for reserved memory   Laura Abbott
• [PATCHv2 2/2] arm: Get rid of meminfo   Laura Abbott
• [PATCHv2 2/2] arm: Get rid of meminfo   Laura Abbott
• [PATCHv3 0/2] Remove ARM meminfo   Laura Abbott
• [PATCHv3 2/2] arm: Get rid of meminfo   Laura Abbott
• [RFC/PATCH 0/3] Add devicetree scanning for randomness   Laura Abbott
• [RFC/PATCH 1/3] of: Add early randomness hooks   Laura Abbott
• [RFC/PATCH 2/3] arm: Add ARCH_WANT_OF_RANDOMNESS   Laura Abbott
• [RFC/PATCH 3/3] init: Move stack canary initialization after setup_arch   Laura Abbott
• [RFC/PATCH 0/3] Add devicetree scanning for randomness   Laura Abbott
• [RFC/PATCH 2/3] arm: Add ARCH_WANT_OF_RANDOMNESS   Laura Abbott
• [PATCHv3 2/2] arm: Get rid of meminfo   Laura Abbott
• [PATCHv4 0/2] Remove ARM meminfo   Laura Abbott
• [PATCHv4 2/2] arm: Get rid of meminfo   Laura Abbott
• arm64 cache maintenance on read only address loops forever   Laura Abbott
• arm64 cache maintenance on read only address loops forever   Laura Abbott
• arm64 cache maintenance on read only address loops forever   Laura Abbott
• [PATCH v2 1/7] cpufreq: cpufreq-cpu0: allow optional safe voltage during frequency transitions   Thomas Abraham
• [PATCH v2 1/7] cpufreq: cpufreq-cpu0: allow optional safe voltage during frequency transitions   Thomas Abraham
• [PATCH 0/2] Add device tree based lookup of boost mode OPPs   Thomas Abraham
• [PATCH 1/2] PM / OPP: Add support for 'boost' mode OPP   Thomas Abraham
• [PATCH 2/2] Documentation: devicetree: Add boost-opp binding to list boost mode OPPs   Thomas Abraham
• [PATCH 1/2] PM / OPP: Add support for 'boost' mode OPP   Thomas Abraham
• [PATCH v2 7/7] cpufreq: exynos: remove all exynos specific cpufreq driver support   Thomas Abraham
• [PATCH v2 7/7] cpufreq: exynos: remove all exynos specific cpufreq driver support   Thomas Abraham
• [PATCH v2 0/9] Samsung PM consolidation part 1 (clocks)   Thomas Abraham
• [PATCH v2 0/2] Add device tree based lookup of boost mode frequency   Thomas Abraham
• [PATCH v2 1/2] PM / OPP: Allow boost frequency to be looked up from device tree   Thomas Abraham
• [PATCH v2 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency   Thomas Abraham
• [PATCH v2 1/2] PM / OPP: Allow boost frequency to be looked up from device tree   Thomas Abraham
• [PATCH v2 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency   Thomas Abraham
• [PATCH v3 0/7] cpufreq: use cpufreq-cpu0 driver for exynos based platforms   Thomas Abraham
• [PATCH v3 1/7] cpufreq: cpufreq-cpu0: allow use of optional boost mode frequencies   Thomas Abraham
• [PATCH v3 2/7] clk: samsung: add infrastructure to register cpu clocks   Thomas Abraham
• [PATCH v3 3/7] Documentation: devicetree: add cpu clock configuration data binding for Exynos4/5   Thomas Abraham
• [PATCH v3 4/7] clk: exynos: use cpu-clock provider type to represent arm clock   Thomas Abraham
• [PATCH v3 5/7] ARM: dts: Exynos: add cpu nodes, opp and cpu clock configuration data   Thomas Abraham
• [PATCH v3 6/7] ARM: Exynos: switch to using generic cpufreq-cpu0 driver   Thomas Abraham
• [PATCH v3 7/7] cpufreq: exynos: remove all exynos specific cpufreq driver support   Thomas Abraham
• [PATCH v2 1/2] PM / OPP: Allow boost frequency to be looked up from device tree   Thomas Abraham
• [PATCH v3 1/7] cpufreq: cpufreq-cpu0: allow use of optional boost mode frequencies   Thomas Abraham
• [PATCH v3 5/7] ARM: dts: Exynos: add cpu nodes, opp and cpu clock configuration data   Thomas Abraham
• [PATCH v2 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency   Thomas Abraham
• [PATCH v2 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency   Thomas Abraham
• [PATCH v3 2/7] clk: samsung: add infrastructure to register cpu clocks   Thomas Abraham
• [PATCH v3 1/7] cpufreq: cpufreq-cpu0: allow use of optional boost mode frequencies   Thomas Abraham
• [PATCH] ARM: tegra: don't timeout if CPU is powergated   Stefan Agner
• [PATCH] ARM: tegra: dalmore: fix irq trigger type   Stefan Agner
• [PATCH] ARM: tegra: dalmore: fix irq trigger type   Stefan Agner
• [PATCH 0/2] CCI PMU update   Punit Agrawal
• [PATCH 1/2] drivers: cci: Extend support to CCI revisions > r1p2   Punit Agrawal
• [PATCH 2/2] drivers: cci: Export CCI PMU revision   Punit Agrawal
• [PATCH V4 0/8]PCI:Add SPEAr13xx PCie support   Pratyush Anand
• [PATCH V4 1/8] clk: SPEAr13xx: Fix pcie clock name   Pratyush Anand
• [PATCH V4 2/8] SPEAr13xx: Fix static mapping table   Pratyush Anand
• [PATCH V4 3/8] SPEAr13xx: defconfig: Update   Pratyush Anand
• [PATCH V4 4/8] phy: st-miphy-40lp: Add skeleton driver   Pratyush Anand
• [PATCH V4 5/8] SPEAr13xx: Fixup: Move SPEAr1340 SATA platform code to phy driver   Pratyush Anand
• [PATCH V4 6/8] phy: st-miphy-40lp: Add SPEAr1310 and SPEAr1340 PCIe phy support   Pratyush Anand
• [PATCH V4 4/8] phy: st-miphy-40lp: Add skeleton driver   Pratyush Anand
• [PATCH V4 4/8] phy: st-miphy-40lp: Add skeleton driver   Pratyush Anand
• [PATCH V4 5/8] SPEAr13xx: Fixup: Move SPEAr1340 SATA platform code to phy driver   Pratyush Anand
• [PATCH V4 5/8] SPEAr13xx: Fixup: Move SPEAr1340 SATA platform code to phy driver   Pratyush Anand
• [PATCH V4 0/8]PCI:Add SPEAr13xx PCie support   Pratyush Anand
• [PATCH V4 6/8] phy: st-miphy-40lp: Add SPEAr1310 and SPEAr1340 PCIe phy support   Pratyush Anand
• [PATCH V4 6/8] phy: st-miphy-40lp: Add SPEAr1310 and SPEAr1340 PCIe phy support   Pratyush Anand
• [PATCH 5/5] mmc: sdhci-spear: use generic card detection gpio support   Pratyush Anand
• [PATCH v2 00/12] Samsung PM consolidation part 2 (multiplatform)   Doug Anderson
• [PATCH] regulator: core: Make regulator object reflect configured voltage   Bjorn Andersson
• [PATCH] regulator: core: Make regulator object reflect configured voltage   Bjorn Andersson
• [PATCH] regulator: core: Make regulator object reflect configured voltage   Bjorn Andersson
• [PATCH] regulator: core: Make regulator object reflect configured voltage   Bjorn Andersson
• [PATCH] regulator: core: Allow regulator_set_voltage for fixed regulators   Bjorn Andersson
• [PATCHv4 4/7] hwspinlock/core: add common OF helpers   Bjorn Andersson
• [PATCH v3 0/2] Qualcomm Universal Peripheral (QUP) I2C controller   Bjorn Andersson
• [PATCH v3 1/2] i2c: qup: Add device tree bindings information   Bjorn Andersson
• [PATCH v3 2/2] i2c: New bus driver for the Qualcomm QUP I2C controller   Bjorn Andersson
• [PATCH v3 2/2] i2c: New bus driver for the Qualcomm QUP I2C controller   Bjorn Andersson
• [PATCH v3 2/2] i2c: New bus driver for the Qualcomm QUP I2C controller   Bjorn Andersson
• [PATCH v3 2/2] i2c: New bus driver for the Qualcomm QUP I2C controller   Bjorn Andersson
• [PATCH v3 2/2] i2c: New bus driver for the Qualcomm QUP I2C controller   Bjorn Andersson
• [PATCH v3 2/2] i2c: New bus driver for the Qualcomm QUP I2C controller   Bjorn Andersson
• [PATCH] devicetree: bindings: Make msm8974-pinctrl documentation match code   Bjorn Andersson
• [PATCHv4 4/7] hwspinlock/core: add common OF helpers   Suman Anna
• [PATCHv4 0/7] omap hwspinlock dt support   Suman Anna
• [PATCHv2 00/16] OMAP IOMMU DT adaptation and cleanup   Suman Anna
• [PATCHv2 01/16] iommu/omap: convert to devm_* interfaces   Suman Anna
• [PATCHv2 02/16] iommu/omap: omap_iommu_attach() should return ENODEV, not NULL   Suman Anna
• [PATCHv2 03/16] Documentation: dt: add OMAP iommu bindings   Suman Anna
• [PATCHv2 04/16] iommu/omap: add devicetree support   Suman Anna
• [PATCHv2 05/16] iommu/omap: enable bus-error back on supported iommus   Suman Anna
• [PATCHv2 06/16] iommu/omap: allocate archdata on the fly for DT-based devices   Suman Anna
• [PATCHv2 07/16] iommu/omap: allow enable/disable even without pdata   Suman Anna
• [PATCHv2 08/16] ARM: OMAP3: remove deprecated CONFIG_OMAP_IOMMU_IVA2   Suman Anna
• [PATCHv2 09/16] ARM: OMAP2+: change the ISP device archdata MMU name   Suman Anna
• [PATCHv2 10/16] ARM: OMAP2+: use pdata quirks for iommu reset lines   Suman Anna
• [PATCHv2 11/16] ARM: OMAP3: fix iva mmu programming issues   Suman Anna
• [PATCHv2 12/16] ARM: OMAP5: hwmod data: add mmu data for ipu & dsp   Suman Anna
• [PATCHv2 13/16] ARM: OMAP2+: extend iommu pdata-quirks to OMAP5   Suman Anna
• [PATCHv2 14/16] ARM: OMAP3: hwmod data: cleanup data for IOMMUs   Suman Anna
• [PATCHv2 15/16] ARM: OMAP4: hwmod data: cleanup data for IOMMUs   Suman Anna
• [PATCHv2 16/16] ARM: OMAP2+: Remove legacy omap-iommu.c   Suman Anna
• [PATCH 0/4] OMAP IOMMU DTS nodes   Suman Anna
• [PATCH 1/4] ARM: dts: OMAP3: Update ISP IOMMU node   Suman Anna
• [PATCH 2/4] ARM: dts: OMAP3: Add IVA IOMMU node   Suman Anna
• [PATCH 3/4] ARM: dts: OMAP4: Add IOMMU nodes   Suman Anna
• [PATCH 4/4] ARM: dts: OMAP5: Add IOMMU nodes   Suman Anna
• [GIT PULL] ARM: OMAP2+: clock/PRCM/hwmod fixes for v3.14-rc   Suman Anna
• [PATCHv2 03/16] Documentation: dt: add OMAP iommu bindings   Suman Anna
• [PATCHv4 0/7] omap hwspinlock dt support   Suman Anna
• [PATCHv2 02/16] iommu/omap: omap_iommu_attach() should return ENODEV, not NULL   Suman Anna
• [PATCHv2 07/16] iommu/omap: allow enable/disable even without pdata   Suman Anna
• [PATCHv2 03/16] Documentation: dt: add OMAP iommu bindings   Suman Anna
• [PATCH v2 0/2] ARM: OMAP4: Fix gpmc_fck clock   Suman Anna
• [PATCHv2 02/16] iommu/omap: omap_iommu_attach() should return ENODEV, not NULL   Suman Anna
• [PATCHv2 03/16] Documentation: dt: add OMAP iommu bindings   Suman Anna
• [PATCHv2 14/16] ARM: OMAP3: hwmod data: cleanup data for IOMMUs   Suman Anna
• [PATCHv2 10/16] ARM: OMAP2+: use pdata quirks for iommu reset lines   Suman Anna
• [PATCHv2 03/16] Documentation: dt: add OMAP iommu bindings   Suman Anna
• [PATCH 3/4] ARM: dts: OMAP4: Add IOMMU nodes   Suman Anna
• [PATCHv2 03/16] Documentation: dt: add OMAP iommu bindings   Suman Anna
• [PATCHv2 03/16] Documentation: dt: add OMAP iommu bindings   Suman Anna
• [PATCHv2 03/16] Documentation: dt: add OMAP iommu bindings   Suman Anna
• [PATCHv2 08/16] ARM: OMAP3: remove deprecated CONFIG_OMAP_IOMMU_IVA2   Suman Anna
• [PATCHv3 00/13] OMAP IOMMU DT adaptation for 3.15   Suman Anna
• [PATCHv3 01/13] iommu/omap: convert to devm_* interfaces   Suman Anna
• [PATCHv3 02/13] iommu/omap: fix error return paths in omap_iommu_attach()   Suman Anna
• [PATCHv3 03/13] iommu/omap: allow enable/disable even without pdata   Suman Anna
• [PATCHv3 04/13] Documentation: dt: add OMAP iommu bindings   Suman Anna
• [PATCHv3 05/13] iommu/omap: add devicetree support   Suman Anna
• [PATCHv3 06/13] iommu/omap: enable bus-error back on supported iommus   Suman Anna
• [PATCHv3 07/13] iommu/omap: allocate archdata on the fly for DT-based devices   Suman Anna
• [PATCHv3 08/13] ARM: OMAP3: remove deprecated CONFIG_OMAP_IOMMU_IVA2   Suman Anna
• [PATCHv3 09/13] ARM: OMAP3: fix iva mmu programming issues   Suman Anna
• [PATCHv3 10/13] ARM: OMAP2+: change the ISP device archdata MMU name for DT   Suman Anna
• [PATCHv3 11/13] ARM: OMAP2+: use pdata quirks for iommu reset lines   Suman Anna
• [PATCHv3 12/13] ARM: OMAP5: hwmod data: add mmu data for ipu & dsp   Suman Anna
• [PATCHv3 13/13] ARM: OMAP2+: extend iommu pdata-quirks to OMAP5   Suman Anna
• [PATCHv2 0/4] OMAP IOMMU DTS nodes   Suman Anna
• [PATCHv2 1/4] ARM: dts: OMAP3: Update ISP IOMMU node   Suman Anna
• [PATCHv2 2/4] ARM: dts: OMAP3: Add IVA IOMMU node   Suman Anna
• [PATCHv2 3/4] ARM: dts: OMAP4: Add IOMMU nodes   Suman Anna
• [PATCHv2 4/4] ARM: dts: OMAP5: Add IOMMU nodes   Suman Anna
• [PATCH v4 0/6] generic early_ioremap support   H. Peter Anvin
• [PATCH v4 0/6] generic early_ioremap support   H. Peter Anvin
• [PATCH] can: xilinx CAN controller support.   Kedareswara rao Appana
• [PATCH v2] can: xilinx CAN controller support.   Kedareswara rao Appana
• [PATCH] can: xilinx CAN controller support.   Kedareswara rao Appana
• [PATCH v4] can: xilinx CAN controller support.   Kedareswara rao Appana
• PCIe trouble on imx6q   Kamel BOUHARA
• [PATCH 0/3] clk: at91: various fixes and improvements   Boris BREZILLON
• [PATCH 1/3] clk: at91: fix programmable clk irq handling   Boris BREZILLON
• [PATCH 2/3] clk: at91: replace prog clk round_rate with determine_rate   Boris BREZILLON
• [PATCH 3/3] clk: at91: propagate rate change on system clks   Boris BREZILLON
• [PATCH v2] at91: pmc: Fixed irq's name allocation for programmable clocks   Boris BREZILLON
• [PATCH v2] at91: pmc: Fixed irq's name allocation for programmable clocks   Boris BREZILLON
• [PATCH 0/3] clk: at91: various fixes and improvements   Boris BREZILLON
• [PATCH v2] at91: pmc: Fixed irq's name allocation for programmable clocks   Boris BREZILLON
• [PATCH] clk: respect the clock dependencies in of_clk_init   Boris BREZILLON
• [PATCH v2 4/4] clk: at91: optimization of the determine_rate callback   Boris BREZILLON
• [PATCH] clk: add strict of_clk_init dependency check   Boris BREZILLON
• [RFC PATCH v2 03/14] of: mtd: add documentation for nand-ecc-level property   Boris BREZILLON
• [RFC PATCH 1/9] mtd: nand: retrieve ECC requirements from Hynix READ ID byte 4   Boris BREZILLON
• [PATCH] clk: add strict of_clk_init dependency check   Boris BREZILLON
• [PATCH v3 04/15] ARM: at91: prepare common clk transition for sam9261 SoC   Boris BREZILLON
• [PATCH v3 01/15] at91: dt: Add at91sam9261 dt SoC support   Boris BREZILLON
• [PATCH v3 05/15] ARM: at91: move sam9261 SoC to common clk   Boris BREZILLON
• [PATCH] clk: at91: remove redundant assignment   Boris BREZILLON
• [PATCH] clk:at91: Fix memory leak in of_at91_clk_master_setup()   Boris BREZILLON
• [PATCH] ARM: at91/DT: add NAND + DMA property   Boris BREZILLON
• [PATCH] clk: at91: Fix memory leak   Boris BREZILLON
• [PATCH] clk:at91: Fix memory leak in of_at91_clk_master_setup()   Boris BREZILLON
• [PATCHv2 1/8] ARM: at91: Add at91sam9rl DT SoC support   Boris BREZILLON
• [PATCHv2 1/8] ARM: at91: Add at91sam9rl DT SoC support   Boris BREZILLON
• [PATCHv2 1/8] ARM: at91: Add at91sam9rl DT SoC support   Boris BREZILLON
• [PATCHv2 1/8] ARM: at91: Add at91sam9rl DT SoC support   Boris BREZILLON
• [PATCH v2 2/4] clk: at91: propagate rate change on system clks   Boris BREZILLON
• [PATCH] clk:at91: Fix memory leak in of_at91_clk_master_setup()   Boris BREZILLON
• Device Tree file for Zyxel NSA320   Adam Baker
• [PATCH v5 1/6] spmi: Linux driver framework for SPMI   Felipe Balbi
• [PATCH 2/2] USB: at91: using USBA_NR_DMAS for DMA channels   Felipe Balbi
• [PATCH v4 1/2] usb: musb: dsps, debugfs files   Felipe Balbi
• [PATCH v2] usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEP   Felipe Balbi
• [PATCH v2] usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEP   Felipe Balbi
• [PATCH v9 01/12] usb: doc: phy-mxs: Add more compatible strings   Felipe Balbi
• [PATCH v9 11/12] usb: phy-mxs: Add system suspend/resume API   Felipe Balbi
• [PATCH v4 1/2] usb: musb: dsps, debugfs files   Felipe Balbi
• [PATCH v4 1/2] usb: musb: dsps, debugfs files   Felipe Balbi
• [PATCH 2/2] USB: at91: using USBA_NR_DMAS for DMA channels   Felipe Balbi
• [PATCH v9 01/12] usb: doc: phy-mxs: Add more compatible strings   Felipe Balbi
• [PATCH] phy: restrict Samsung S5P/Exynos drivers to the respective architectures   Felipe Balbi
• randconfig build error   Felipe Balbi
• randconfig build error   Felipe Balbi
• [PATCH 1/2] usb: dwc3: core: continue probing if usb phy library returns -ENODEV/-ENXIO   Felipe Balbi
• [Patch v7 2/2] dmaengine: add Qualcomm BAM dma driver   Felipe Balbi
• [Patch v7 2/2] dmaengine: add Qualcomm BAM dma driver   Felipe Balbi
• [RFC PATCH 1/6] PM / Voltagedomain: Add generic clk notifier handler for regulator based dynamic voltage scaling   Felipe Balbi
• [PATCH v12 1/4] PHY: Add function set_speed to generic PHY framework   Felipe Balbi
• [PATCH v12 3/4] PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver   Felipe Balbi
• [PATCH v12 1/4] PHY: Add function set_speed to generic PHY framework   Felipe Balbi
• [PATCH v12 1/4] PHY: Add function set_speed to generic PHY framework   Felipe Balbi
• [PATCH RFC 07/31] mmc: sdhci: push card_tasklet into threaded irq handler   Chris Ball
• [PATCH RFC 07/31] mmc: sdhci: push card_tasklet into threaded irq handler   Chris Ball
• [PATCH v4 5/8] mmc: sdhci-bcm-kona: Add basic use of clocks   Chris Ball
• [RFC] ARM VM System Sepcification   Robie Basak
• [PATCH 02/18] arm64: GICv3 device tree binding documentation   Arnab Basu
• [PATCH 01/18] arm64: initial support for GICv3   Arnab Basu
• [PATCH 1/1] ARM: OMAP5: Fix reboot handling   Vaibhav Bedia
• CONFIG_PREEMPT in omap2plus_defconfig   Vaibhav Bedia
• [RFC PATCH] ARM: OMAP2+: clockdomain: Reintroduce SW_SLEEP Support (fwd)   Vaibhav Bedia
• [RFC PATCH] ARM: OMAP2+: clockdomain: Reintroduce SW_SLEEP Support (fwd)   Vaibhav Bedia
• [PATCH] ARM: dts: exynos5250-arndale: Keep G3D regulator always on   Tushar Behera
• [PATCH] arm: add DSB after icache flush in __flush_icache_all()   Dirk Behme
• [PATCH] arm: add DSB after icache flush in __flush_icache_all()   Dirk Behme
• How to select between different display timings? (was: [PATCH 7/8] ARM: dts: tx28: restructure and update DTS file)   Dirk Behme
• How to select between different display timings?   Dirk Behme
• [PATCH v2] arm: fix memset-related crashes caused by recent GCC (4.7.2) optimizations   Dirk Behme
• Linux-3.13.5/Samsung S3C6410/Mini6410: What does this warning mean?   Juergen Beisert
• [PATCHv6] staging/iio/adc: change the MXS touchscreen driver implementation   Juergen Beisert
• [PATCHv6] staging/iio/adc: change the MXS touchscreen driver implementation   Juergen Beisert
• [PATCH] staging/iio/adc/MXS/LRADC: fix touchscreen statemachine   Juergen Beisert
• [PATCH 1/2] mfd: twl4030-madc: Add devicetree support.   Marek Belisko
• [PATCH 2/2] ARM: dts: twl4030: Add twl4030-madc node.   Marek Belisko
• [PATCH 0/3] arm: at91: update defconfigs   Alexandre Belloni
• [PATCH 1/3] arm: at91sam9rl: refresh defconfig   Alexandre Belloni
• [PATCH 2/3] arm: at91sam9260_9g20: remove useless configuration   Alexandre Belloni
• [PATCH 3/3] arm: at91sam9260_9g20: refresh configuration   Alexandre Belloni
• [PATCH] MTD: atmel_nand: POI fall back is not an issue: change log level   Alexandre Belloni
• [PATCH v4 3/8] at91: dt: Add at91sam9261 dt SoC support   Alexandre Belloni
• [PATCH v4 3/8] at91: dt: Add at91sam9261 dt SoC support   Alexandre Belloni
• [PATCH v4 3/8] at91: dt: Add at91sam9261 dt SoC support   Alexandre Belloni
• [PATCH 0/3] Device tree support for the at91sam9rlek   Alexandre Belloni
• [PATCH 1/3] ARM: at91: Add at91sam9rl DT SoC support   Alexandre Belloni
• [PATCH 2/3] ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs   Alexandre Belloni
• [PATCH 3/3] ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek   Alexandre Belloni
• [PATCH] clk: at91: Fix memory leak   Alexandre Belloni
• [PATCH] clk: at91: Fix memory leak   Alexandre Belloni
• [PATCH] clk:at91: Fix memory leak in of_at91_clk_master_setup()   Alexandre Belloni
• [PATCH 3/3] ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek   Alexandre Belloni
• [PATCH 1/3] ARM: at91: Add at91sam9rl DT SoC support   Alexandre Belloni
• [PATCHv2 0/8] Device tree support for the at91sam9rlek   Alexandre Belloni
• [PATCHv2 1/8] ARM: at91: Add at91sam9rl DT SoC support   Alexandre Belloni
• [PATCHv2 2/8] ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs   Alexandre Belloni
• [PATCHv2 3/8] ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek   Alexandre Belloni
• [PATCHv2 4/8] ARM: at91: prepare sam9 dt boards transition to common clk   Alexandre Belloni
• [PATCHv2 5/8] ARM: at91: prepare common clk transition for sam9rl SoCs   Alexandre Belloni
• [PATCHv2 6/8] ARM: at91/dt: define at91sam9rl clocks   Alexandre Belloni
• [PATCHv2 7/8] ARM: at91/dt: define main clk frequency of at91sam9rlek   Alexandre Belloni
• [PATCHv2 8/8] ARM: at91: switch sam9rl to common clock framework   Alexandre Belloni
• [PATCHv2 1/8] ARM: at91: Add at91sam9rl DT SoC support   Alexandre Belloni
• [PATCHv3 0/9] Device tree support for the at91sam9rlek   Alexandre Belloni
• [PATCHv3 1/9] ARM: at91: prepare at91sam9rl DT transition   Alexandre Belloni
• [PATCHv3 2/9] ARM: at91: Add at91sam9rl DT SoC support   Alexandre Belloni
• [PATCHv3 3/9] ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs   Alexandre Belloni
• [PATCHv3 4/9] ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek   Alexandre Belloni
• [PATCHv3 5/9] ARM: at91: prepare sam9 dt boards transition to common clk   Alexandre Belloni
• [PATCHv3 6/9] ARM: at91: prepare common clk transition for sam9rl SoCs   Alexandre Belloni
• [PATCHv3 7/9] ARM: at91/dt: define at91sam9rl clocks   Alexandre Belloni
• [PATCHv3 8/9] ARM: at91/dt: define main clk frequency of at91sam9rlek   Alexandre Belloni
• [PATCHv3 9/9] ARM: at91: switch sam9rl to common clock framework   Alexandre Belloni
• [PATCHv2 1/8] ARM: at91: Add at91sam9rl DT SoC support   Alexandre Belloni
• [PATCHv6] staging/iio/adc: change the MXS touchscreen driver implementation   Alexandre Belloni
• [PATCH] staging/iio/adc/MXS/LRADC: fix touchscreen statemachine   Alexandre Belloni
• [PATCHv3 4/9] ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek   Alexandre Belloni
• [PATCH] ARM: at91: sama5d3: get rid of atmel_tsadcc driver   Alexandre Belloni
• [PATCH 1/7] Documentation: dt: iio: improve atmel-adc documentation   Alexandre Belloni
• [PATCH 2/7] Documentation: dt: iio: move arm/atmel-adc.txt to iio/adc/at91_adc.txt   Alexandre Belloni
• [PATCH 3/7] ARM: at91/dt: at91-ariag25: remove useless adc properties   Alexandre Belloni
• [PATCH 4/7] ARM: at91/dt: at91sam9260: remove useless adc properties   Alexandre Belloni
• [PATCH 5/7] ARM: at91/dt: at91sam9g45: remove useless adc properties   Alexandre Belloni
• [PATCH 6/7] ARM: at91/dt: at91sam9x5: remove useless adc properties   Alexandre Belloni
• [PATCH 7/7] ARM: at91/dt: sama5d3: remove useless adc properties   Alexandre Belloni
• [PATCH 1/7] Documentation: dt: iio: improve atmel-adc documentation   Alexandre Belloni
• [PATCHv4 0/9] Device tree support for the at91sam9rlek   Alexandre Belloni
• [PATCHv4 1/9] ARM: at91: prepare at91sam9rl DT transition   Alexandre Belloni
• [PATCHv4 2/9] ARM: at91: Add at91sam9rl DT SoC support   Alexandre Belloni
• [PATCHv4 3/9] ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs   Alexandre Belloni
• [PATCHv4 4/9] ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek   Alexandre Belloni
• [PATCHv4 5/9] ARM: at91: prepare sam9 dt boards transition to common clk   Alexandre Belloni
• [PATCHv4 6/9] ARM: at91: prepare common clk transition for sam9rl SoCs   Alexandre Belloni
• [PATCHv4 7/9] ARM: at91/dt: define at91sam9rl clocks   Alexandre Belloni
• [PATCHv4 8/9] ARM: at91/dt: define main clk frequency of at91sam9rlek   Alexandre Belloni
• [PATCHv4 9/9] ARM: at91: switch sam9rl to common clock framework   Alexandre Belloni
• [PATCH] usb: gadget: atmel_usba: fix crash when no endpoint are specified   Alexandre Belloni
• [PATCH] Doc: USB: gadget: atmel_usba correct atmel,vbus-gpio meaning   Alexandre Belloni
• [PATCHv2 0/7] at91_adc: documentation and device tree cleanups   Alexandre Belloni
• [PATCHv2 1/7] Documentation: dt: iio: improve atmel-adc documentation   Alexandre Belloni
• [PATCHv2 2/7] Documentation: dt: iio: move arm/atmel-adc.txt to iio/adc/at91_adc.txt   Alexandre Belloni
• [PATCHv2 3/7] ARM: at91/dt: at91-ariag25: remove useless adc properties   Alexandre Belloni
• [PATCHv2 4/7] ARM: at91/dt: at91sam9260: remove useless adc properties   Alexandre Belloni
• [PATCHv2 5/7] ARM: at91/dt: at91sam9g45: remove useless adc properties   Alexandre Belloni
• [PATCHv2 6/7] ARM: at91/dt: at91sam9x5: remove useless adc properties   Alexandre Belloni
• [PATCHv2 7/7] ARM: at91/dt: sama5d3: remove useless adc properties   Alexandre Belloni
• [PATCH v4 0/8] wilink: add device tree support   Alexandre Belloni
• [PATCH] usb: gadget: atmel_usba: Fix crashed during stopping when DEBUG is enabled   Alexandre Belloni
• [PATCH] remoteproc/davinci: drop needless devm_clk_put   Ohad Ben-Cohen
• [PATCHv2 0/5] net: rfkill: gpio: cleanup and a few new acpi ids   Johannes Berg
• [PATCHv2 1/5] ARM: tegra: remove obsolete gpio entries   Johannes Berg
• [PATCH v5 08/14] ahci-platform: "Library-ise" suspend / resume functionality   Arnd Bergmann
• [PATCH 09/10] watchdog: xilinx: Add missing binding   Arnd Bergmann
• [PATCH 09/10] watchdog: xilinx: Add missing binding   Arnd Bergmann
• [PATCH] pci: Add support for creating a generic host_bridge from device tree   Arnd Bergmann
• [PATCH] arm64: Add architecture support for PCI   Arnd Bergmann
• [PATCH] pci: Add support for creating a generic host_bridge from device tree   Arnd Bergmann
• [PATCH] arm64: Add architecture support for PCI   Arnd Bergmann
• [RFC PATCH V3 1/4] pci: APM X-Gene PCIe controller driver   Arnd Bergmann
• [PATCH] arm64: Add architecture support for PCI   Arnd Bergmann
• [PATCH] arm64: Add architecture support for PCI   Arnd Bergmann
• [PATCH] arm64: Add architecture support for PCI   Arnd Bergmann
• [PATCH] pci: Add support for creating a generic host_bridge from device tree   Arnd Bergmann
• [PATCH] arm64: Add architecture support for PCI   Arnd Bergmann
• [PATCH] ARM: pxa: fix various compilation problems   Arnd Bergmann
• [PATCH] pci: Add support for creating a generic host_bridge from device tree   Arnd Bergmann
• [RFC/RFT 2/2] ARM: keystone: Install hooks for dma address translation routines   Arnd Bergmann
• [RFC/RFT 1/2] ARM: mm: introduce arch hooks for dma address translation routines   Arnd Bergmann
• [PATCH] arm64: Add architecture support for PCI   Arnd Bergmann
• [RFC/RFT 1/2] ARM: mm: introduce arch hooks for dma address translation routines   Arnd Bergmann
• [PATCH] arm64: Add architecture support for PCI   Arnd Bergmann
• [ath9k-devel] [PATCH 1/3] ath9k: Fix build error on ARM   Arnd Bergmann
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Arnd Bergmann
• [PATCH] arm64: Add architecture support for PCI   Arnd Bergmann
• [RFC PATCH V3 1/4] pci: APM X-Gene PCIe controller driver   Arnd Bergmann
• [PATCH 09/10] watchdog: xilinx: Add missing binding   Arnd Bergmann
• [PATCH] arm64: Add architecture support for PCI   Arnd Bergmann
• [PATCH 09/10] watchdog: xilinx: Add missing binding   Arnd Bergmann
• [PATCH 09/10] watchdog: xilinx: Add missing binding   Arnd Bergmann
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Arnd Bergmann
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Arnd Bergmann
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Arnd Bergmann
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Arnd Bergmann
• [RFC/RFT 1/2] ARM: mm: introduce arch hooks for dma address translation routines   Arnd Bergmann
• [GIT PULL] ARM: imx: device tree changes for 3.15, take 1   Arnd Bergmann
• [PATCH v2] pwm: add CSR SiRFSoC PWM driver   Arnd Bergmann
• [PATCH V4 6/8] phy: st-miphy-40lp: Add SPEAr1310 and SPEAr1340 PCIe phy support   Arnd Bergmann
• [PATCH] backlight: add PWM dependencies   Arnd Bergmann
• [PATCH] backlight: add PWM dependencies   Arnd Bergmann
• [PATCH 4/4] ARM: Kirkwood: Add support for many Synology NAS devices   Arnd Bergmann
• [PATCH 1/4] ARM: STi: add stid127 soc support   Arnd Bergmann
• [PATCH] backlight: add PWM dependencies   Arnd Bergmann
• [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY   Arnd Bergmann
• [PATCH 1/2] arm64: Add seccomp support   Arnd Bergmann
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Arnd Bergmann
• [PATCH] pci: Add support for creating a generic host_bridge from device tree   Arnd Bergmann
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Arnd Bergmann
• [PATCH v3 1/6] arm64: Add ftrace support   Arnd Bergmann
• [GIT PULL] ARM: imx: device tree changes for 3.15, take 1   Arnd Bergmann
• [PATCH V5 4/8] phy: st-miphy-40lp: Add skeleton driver   Arnd Bergmann
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Arnd Bergmann
• [PATCH 4/7] spi: pl022: attempt to get sspclk by name   Arnd Bergmann
• [PATCH] can: xilinx CAN controller support.   Arnd Bergmann
• [PATCH V5 4/8] phy: st-miphy-40lp: Add skeleton driver   Arnd Bergmann
• ohci-/ehci-platform: Change compatible string to ?hci-platform   Arnd Bergmann
• [PATCH 4/7] spi: pl022: attempt to get sspclk by name   Arnd Bergmann
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Arnd Bergmann
• [PATCH 00/12] Versatile Express updates   Arnd Bergmann
• [PATCH 09/12] hwmon: vexpress: Use devm helper for hwmon device registration   Arnd Bergmann
• [PATCH 02/12] power/reset: vexpress: Use udelay instead of timers   Arnd Bergmann
• [PATCH 4/9] ARM: Select V6K instead of V6 by default for multi-platform   Arnd Bergmann
• [PATCH 4/9] ARM: Select V6K instead of V6 by default for multi-platform   Arnd Bergmann
• [PATCH v3 1/6] arm64: Add ftrace support   Arnd Bergmann
• [PATCH 1/2] arm64: Add seccomp support   Arnd Bergmann
• [PATCH 1/2] arm64: Add seccomp support   Arnd Bergmann
• [PATCH 4/7] spi: pl022: attempt to get sspclk by name   Arnd Bergmann
• [RFC/PATCH 0/3] Add devicetree scanning for randomness   Arnd Bergmann
• [PATCH 4/7] spi: pl022: attempt to get sspclk by name   Arnd Bergmann
• [PATCH v2 02/10] ARM: mvebu: add initial support for the Armada 375 SOCs   Arnd Bergmann
• [PATCH v2 03/10] ARM: mvebu: add workaround for data abort issue on Armada 375   Arnd Bergmann
• [PATCH v2 05/10] ARM: mvebu: add Device Tree for the Armada 375 DB board   Arnd Bergmann
• [PATCH v2 0/9] ARM: multi-platform kconfig cleanup and mach-virt removal   Arnd Bergmann
• [PATCH 4/7] spi: pl022: attempt to get sspclk by name   Arnd Bergmann
• [PATCH v2 0/9] ARM: multi-platform kconfig cleanup and mach-virt removal   Arnd Bergmann
• [PATCH 4/4] ARM: Delete asm/system.h   Arnd Bergmann
• [PATCH v2 0/9] ARM: multi-platform kconfig cleanup and mach-virt removal   Arnd Bergmann
• [RFC/PATCH 0/3] Add devicetree scanning for randomness   Arnd Bergmann
• [PATCH v2 0/9] ARM: multi-platform kconfig cleanup and mach-virt removal   Arnd Bergmann
• [RFC/PATCH 0/3] Add devicetree scanning for randomness   Arnd Bergmann
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Arnd Bergmann
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Arnd Bergmann
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH 1/2] bus: mvebu-mbus: Fix incorrect size for PCI aperture resources   Arnd Bergmann
• [PATCH 2/2] PCI: mvebu - Call request_resources on the apertures   Arnd Bergmann
• [PATCH] pci: Add support for creating a generic host_bridge from device tree   Arnd Bergmann
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH v3 01/13] ARM: mvebu: rename armada-370-xp.c to armada-mvebu.c   Arnd Bergmann
• [PATCH] pci: Add support for creating a generic host_bridge from device tree   Arnd Bergmann
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH 1/3] mmc: add support for power-on sequencing through DT   Arnd Bergmann
• [PATCH v3 01/13] ARM: mvebu: rename armada-370-xp.c to armada-mvebu.c   Arnd Bergmann
• [PATCH 1/3] mmc: add support for power-on sequencing through DT   Arnd Bergmann
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• use {readl|writel}_relaxed instead of readl/writel in i2c-designware-core ?   Arnd Bergmann
• [PATCH v5 0/3] serial: fsl_lpuart: add DMA support   Arnd Bergmann
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH v2 0/3] ARM: PCI: implement generic PCI host controller   Arnd Bergmann
• [PATCH 6/6] RFC: ARM: integrator: get rid of <mach/memory.h>   Arnd Bergmann
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Arnd Bergmann
• [PATCH 1/3] mmc: add support for power-on sequencing through DT   Arnd Bergmann
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH 1/3] mmc: add support for power-on sequencing through DT   Arnd Bergmann
• [PATCH v2 05/23] ARM: Kirkwood: Seperate board-dt from common and pcie code.   Arnd Bergmann
• [PATCH v2 10/23] ARM: MM: Add DT binding for Feroceon L2 cache   Arnd Bergmann
• [PATCH v2 20/23] ARM: config: Add a multi_v5_defconfig   Arnd Bergmann
• [PATCH v2 00/23] Move DT kirkwood into mach-mvebu   Arnd Bergmann
• [PATCH 1/3] mmc: add support for power-on sequencing through DT   Arnd Bergmann
• [PATCH v2 12/23] ARM: Fix default CPU selection for ARCH_MULTI_V5   Arnd Bergmann
• [PATCH v2 10/23] ARM: MM: Add DT binding for Feroceon L2 cache   Arnd Bergmann
• [PATCH 1/3] mmc: add support for power-on sequencing through DT   Arnd Bergmann
• [RFC/PATCH 0/3] Add devicetree scanning for randomness   Arnd Bergmann
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Arnd Bergmann
• [PATCH v4 1/3] ARM: EXYNOS: initial board support for exynos5260 SoC   Arnd Bergmann
• [PATCH v4 1/3] ARM: EXYNOS: initial board support for exynos5260 SoC   Arnd Bergmann
• [PATCH v3 3/3] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH 1/4] ARM: clps711x: autcpu12: Fix incorrect NAND CLE GPIO   Arnd Bergmann
• [PATCH v4 1/7] Documentation: Add device tree bindings for Freescale i.MX GPC   Arnd Bergmann
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Arnd Bergmann
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH v2 0/3] ARM: PCI: implement generic PCI host controller   Arnd Bergmann
• [PATCH v2 05/23] ARM: Kirkwood: Seperate board-dt from common and pcie code.   Arnd Bergmann
• [PATCH v3 3/3] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH v3 3/3] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH v3 3/3] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH v3 3/3] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH v3 3/3] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH v3 3/3] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH v4 1/7] Documentation: Add device tree bindings for Freescale i.MX GPC   Arnd Bergmann
• [Patch v3 20/23] ARM: config: Add a multi_v5_defconfig   Arnd Bergmann
• [PATCH v4 1/7] Documentation: Add device tree bindings for Freescale i.MX GPC   Arnd Bergmann
• [Patch v3 20/23] ARM: config: Add a multi_v5_defconfig   Arnd Bergmann
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Arnd Bergmann
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Arnd Bergmann
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Arnd Bergmann
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Arnd Bergmann
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Arnd Bergmann
• [PATCH 1/1] ARM: Exynos: Add generic compatible string   Arnd Bergmann
• [PATCH 1/1] ARM: Exynos: Add generic compatible string   Arnd Bergmann
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Arnd Bergmann
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Arnd Bergmann
• [PATCH 1/1] ARM: Exynos: Add generic compatible string   Arnd Bergmann
• pci-mvebu driver on km_kirkwood   Arnd Bergmann
• pci-mvebu driver on km_kirkwood   Arnd Bergmann
• [PATCH v2 2/2] phy: Select PHY_EXYNOS_DP_VIDEO by default for ARCH_EXYNOS   Arnd Bergmann
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Arnd Bergmann
• [PATCH v2 2/2] phy: Select PHY_EXYNOS_DP_VIDEO by default for ARCH_EXYNOS   Arnd Bergmann
• [PATCH v2 2/2] phy: Select PHY_EXYNOS_DP_VIDEO by default for ARCH_EXYNOS   Arnd Bergmann
• pci-mvebu driver on km_kirkwood   Arnd Bergmann
• [GIT PULL] integrator base patches for v3.15   Arnd Bergmann
• DMABOUNCE in pci-rcar   Arnd Bergmann
• [PATCH v2] arm/smp: Absorb boot_secondary()   Arnd Bergmann
• [PATCH] ARM: Kirkwood: Remove redundant kexec code   Arnd Bergmann
• [PATCH v4] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH 4/4] ARM: keystone: Use dma-ranges for dma_pfn_offset configuration   Arnd Bergmann
• [PATCH v2 2/5] ARM: mvebu: Add i2c alias so setting bus number   Arnd Bergmann
• [PATCH 4/4] ARM: keystone: Use dma-ranges for dma_pfn_offset configuration   Arnd Bergmann
• [PATCH 1/1] ARM: Exynos: Add generic compatible string   Arnd Bergmann
• DMABOUNCE in pci-rcar   Arnd Bergmann
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Arnd Bergmann
• [PATCH v8 1/6] dt-bindings: sram: describe option to reserve parts of the memory   Arnd Bergmann
• [PATCH 4/4] ARM: keystone: Use dma-ranges for dma_pfn_offset configuration   Arnd Bergmann
• [PATCH 4/4] ARM: keystone: Use dma-ranges for dma_pfn_offset configuration   Arnd Bergmann
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Arnd Bergmann
• DMABOUNCE in pci-rcar   Arnd Bergmann
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Arnd Bergmann
• [GIT PULL 00/21] Renesas ARM based SoC Board Updates for v3.15   Arnd Bergmann
• [GIT PULL] ARM: mvebu: watchdog driver changes for v3.15   Arnd Bergmann
• [GIT PULL] DaVinci NAND update for v3.15   Arnd Bergmann
• [GIT PULL] integrator base patches for v3.15   Arnd Bergmann
• [GIT PULL] qcom driver changes for v3.15   Arnd Bergmann
• [GIT PULL] ARM: mvebu: new SoC support for v3.15   Arnd Bergmann
• [GIT PULL] ARM: mvebu: dt changes for v3.15 (round 2)   Arnd Bergmann
• [PATCH v3 5/5] ARM: kirkwood: Add HP T5325 devices to {multi|mvebu}_v5_defconfig   Arnd Bergmann
• [PATCH] ARM: move __fixup_smp out of init section   Arnd Bergmann
• [PATCH] irqchip: gic: use dmb ishst instead of dsb when raising a softirq   Arnd Bergmann
• [PATCH 0/2] CCI PMU update   Arnd Bergmann
• [PATCH v3 5/5] ARM: kirkwood: Add HP T5325 devices to {multi|mvebu}_v5_defconfig   Arnd Bergmann
• [PATCH resend] pwm: Remove obsolete HAVE_PWM Kconfig symbol   Arnd Bergmann
• [GIT PULL] bcm pinctrl rename   Arnd Bergmann
• [GIT PULL v3] efm32 cleanups for next   Arnd Bergmann
• [PATCH RESEND] ARM: imx6: build pm-imx6q.c independently of CONFIG_PM   Arnd Bergmann
• [PATCH] ARM: move __fixup_smp out of init section   Arnd Bergmann
• [PATCH] ARM: move __fixup_smp out of init section   Arnd Bergmann
• [PATCH v4] PCI: ARM: add support for generic PCI host controller   Arnd Bergmann
• [PATCH RESEND] ARM: imx6: build pm-imx6q.c independently of CONFIG_PM   Arnd Bergmann
• [PATCH 0/5] ARM: davinci: tnetv107x removal   Arnd Bergmann
• [PATCH 1/5] ARM: davinci: remove tnetv107x support   Arnd Bergmann
• [PATCH 2/5] gpio: remove obsolete tnetv107x driver   Arnd Bergmann
• [PATCH 3/5] spi: remove obsolete spi-ti-ssp driver   Arnd Bergmann
• [PATCH 4/5] mfd: remove obsolete ti-ssp driver   Arnd Bergmann
• [PATCH 5/5] input: remove obsolete tnetv107x drivers   Arnd Bergmann
• [PATCH 0/5] ARM: davinci: tnetv107x removal   Arnd Bergmann
• [PATCH] scripts/link-vmlinux.sh: correct base address for some ARM special cases   Arnd Bergmann
• [PATCH] scripts/link-vmlinux.sh: correct base address for some ARM special cases   Arnd Bergmann
• [PATCH] scripts/link-vmlinux.sh: correct base address for some ARM special cases   Arnd Bergmann
• [RFC] ARM VM System Sepcification   Arnd Bergmann
• DMABOUNCE in pci-rcar   Arnd Bergmann
• [RFC] ARM VM System Sepcification   Arnd Bergmann
• DMABOUNCE in pci-rcar   Arnd Bergmann
• [RFC] ARM VM System Sepcification   Arnd Bergmann
• [PATCH 1/4] ARM: imx6: move v7_cpu_resume() into suspend-imx6.S   Arnd Bergmann
• [PATCH v2 1/4] pci: OF: Fix the conversion of IO ranges into IO resources.   Arnd Bergmann
• [PATCH v2 2/4] pci: Create pci_host_bridge before its associated bus in pci_create_root_bus.   Arnd Bergmann
• [PATCH v2 3/4] pci: Introduce a domain number for pci_host_bridge.   Arnd Bergmann
• [PATCH v2 4/4] pci: Add support for creating a generic host_bridge from device tree   Arnd Bergmann
• [PATCH v2 4/4] pci: Add support for creating a generic host_bridge from device tree   Arnd Bergmann
• [PATCH v2 1/4] pci: OF: Fix the conversion of IO ranges into IO resources.   Arnd Bergmann
• [RFC] ARM VM System Sepcification   Arnd Bergmann
• [PATCH v2 1/3] Fix ioport_map() for !CONFIG_GENERIC_IOMAP cases.   Arnd Bergmann
• [PATCH v2 3/3] arm64: Add architecture support for PCI   Arnd Bergmann
• [PATCH v3 2/3] ARM: dts: imx6: extend PCIe interrupt list for MSI   Arnd Bergmann
• [PATCH v8.1 1/6] dt-bindings: sram: describe option to reserve parts of the memory   Arnd Bergmann
• [PATCH v2 1/4] pci: OF: Fix the conversion of IO ranges into IO resources.   Arnd Bergmann
• [RFC] ARM VM System Sepcification   Arnd Bergmann
• [PATCH v2 1/4] pci: OF: Fix the conversion of IO ranges into IO resources.   Arnd Bergmann
• [PATCH v2 4/4] pci: Add support for creating a generic host_bridge from device tree   Arnd Bergmann
• [PATCH] dma: of: Move the functions under CONFIG_OF_DMA instead of CONFIG_OF   Arnd Bergmann
• [PATCH 3/3] PCI: imx6: ventana: fixup for IRQ mismapping   Arnd Bergmann
• [PATCH v2 1/7] ARM: mm: Introduce archdata.dma_pfn_offset   Arnd Bergmann
• [PATCH v2 2/7] ARM: mm: Remove unsed dma_to_virt()   Arnd Bergmann
• [PATCH v2 4/7] dma: of: introduce of_dma_is_coherent() helper   Arnd Bergmann
• [PATCH v2 5/7] ARM: of: introduce common routine for DMA configuration   Arnd Bergmann
• [RFC] ARM VM System Sepcification   Arnd Bergmann
• [PATCH v3 2/3] ARM: dts: imx6: extend PCIe interrupt list for MSI   Arnd Bergmann
• [PATCH v2 5/7] ARM: of: introduce common routine for DMA configuration   Arnd Bergmann
• [PATCH] CNS3xxx: Fix PCIe early iotable_init().   Arnd Bergmann
• [ARM] CNS3xxx: 3 regressions identified in v3.14-rc4+   Arnd Bergmann
• [PATCH 1/3] PCI: designware: add legacy PCI interrupt mapping   Arnd Bergmann
• [PATCH V7 07/10] SPEAr13XX: dts: Add PCIe node information   Arnd Bergmann
• [PATCH 1/3] PCI: designware: add legacy PCI interrupt mapping   Arnd Bergmann
• [PATCH] dma: of: Move the functions under CONFIG_OF_DMA instead of CONFIG_OF   Arnd Bergmann
• [GIT PULL] omap fixes for v3.14-rc4   Arnd Bergmann
• [PATCH] dma: of: Move the functions under CONFIG_OF_DMA instead of CONFIG_OF   Arnd Bergmann
• [PATCH v2 4/7] dma: of: introduce of_dma_is_coherent() helper   Arnd Bergmann
• [GIT PULL] qcom DT changes for v3.15   Arnd Bergmann
• [PATCH v2 5/7] ARM: of: introduce common routine for DMA configuration   Arnd Bergmann
• [GIT PULL] kconfig clean-up and mach-virt removal for 3.15   Arnd Bergmann
• [PATCH v2 RESEND 1/3] ARM: clps711x: Add CLPS711X irqchip driver   Arnd Bergmann
• [PATCH 1/4] ARM: clps711x: autcpu12: Fix incorrect NAND CLE GPIO   Arnd Bergmann
• [GIT PULL] kconfig clean-up and mach-virt removal for 3.15   Arnd Bergmann
• [PATCH 7/7] PCI: designware: split samsung and fsl bindings   Arnd Bergmann
• [PATCH 0/7] PCI irq mapping fixes and cleanups   Arnd Bergmann
• [PATCH v2 1/9] ARM: centralize common multi-platform kconfig options   Arnd Bergmann
• [PATCH v2 1/9] ARM: centralize common multi-platform kconfig options   Arnd Bergmann
• [PATCH] ARM: tegra: add LED options back into tegra_defconfig   Arnd Bergmann
• [PATCH] dma: Add Keystone Packet DMA Engine driver   Arnd Bergmann
• [PATCH 08/51] arm, hw-breakpoint: Fix CPU hotplug callback registration   Srivatsa S. Bhat
• [PATCH 09/51] arm, kvm: Fix CPU hotplug callback registration   Srivatsa S. Bhat
• [PATCH 28/51] arm64, hw_breakpoint.c: Fix CPU hotplug callback registration   Srivatsa S. Bhat
• [PATCH 29/51] arm64, debug-monitors: Fix CPU hotplug callback registration   Srivatsa S. Bhat
• [PATCH 08/51] arm, hw-breakpoint: Fix CPU hotplug callback registration   Srivatsa S. Bhat
• [PATCH 08/51] arm, hw-breakpoint: Fix CPU hotplug callback registration   Srivatsa S. Bhat
• [PATCH v2 09/52] arm, hw-breakpoint: Fix CPU hotplug callback registration   Srivatsa S. Bhat
• [PATCH v2 10/52] arm, kvm: Fix CPU hotplug callback registration   Srivatsa S. Bhat
• [PATCH v2 30/52] arm64, hw_breakpoint.c: Fix CPU hotplug callback registration   Srivatsa S. Bhat
• [PATCH v2 31/52] arm64, debug-monitors: Fix CPU hotplug callback registration   Srivatsa S. Bhat
• [PATCH] cpufreq: Set policy to non-NULL only after all hotplug online work is done   Srivatsa S. Bhat
• [PATCH 2/5] cpu: add generic support for CPU feature based module autoloading   Ard Biesheuvel
• [PATCH resend 1/2] arm64: defer reloading a task's FPSIMD state to userland resume   Ard Biesheuvel
• [PATCH resend 1/2] arm64: defer reloading a task's FPSIMD state to userland resume   Ard Biesheuvel
• [PATCH v2 2/5] binfmt_elf: add ELF_HWCAP2 to compat auxv entries   Ard Biesheuvel
• [PATCH v2 0/4] kernel mode NEON optimizations   Ard Biesheuvel
• [PATCH v2 1/4] arm64: add abstractions for FPSIMD state manipulation   Ard Biesheuvel
• [PATCH v2 2/4] arm64: defer reloading a task's FPSIMD state to userland resume   Ard Biesheuvel
• [PATCH v2 3/4] arm64: add support for kernel mode NEON in interrupt context   Ard Biesheuvel
• [PATCH v2 4/4] arm64: add Crypto Extensions based synchronous core AES cipher   Ard Biesheuvel
• [PATCH 21/22] arm: efistub: ignore dtb= when UEFI SecureBoot is enabled   Ard Biesheuvel
• [RFC PATCH] arm64: add support for AES in CCM mode using Crypto Extensions   Ard Biesheuvel
• [PATCH] arm64: add workaround for ambiguous C99 stdint.h types   Ard Biesheuvel
• [PATCH] arm64: add workaround for ambiguous C99 stdint.h types   Ard Biesheuvel
• [PATCH] arm64: add workaround for ambiguous C99 stdint.h types   Ard Biesheuvel
• [PATCH v2 resend 0/5] arm64: advertise availability of CRC and crypto instructions   Ard Biesheuvel
• [PATCH] arm64: add workaround for ambiguous C99 stdint.h types   Ard Biesheuvel
• [PATCH v2 1/4] arm64: add abstractions for FPSIMD state manipulation   Ard Biesheuvel
• [PATCH v2 2/4] arm64: defer reloading a task's FPSIMD state to userland resume   Ard Biesheuvel
• [PATCH v3 0/4] kernel mode NEON optimizations   Ard Biesheuvel
• [PATCH v3 1/4] arm64: add abstractions for FPSIMD state manipulation   Ard Biesheuvel
• [PATCH v3 2/4] arm64: defer reloading a task's FPSIMD state to userland resume   Ard Biesheuvel
• [PATCH v3 3/4] arm64: add support for kernel mode NEON in interrupt context   Ard Biesheuvel
• [PATCH v3 4/4] arm64: add Crypto Extensions based synchronous core AES cipher   Ard Biesheuvel
• [RFC PATCH] arm64: add support for AES in CCM mode using Crypto Extensions   Ard Biesheuvel
• [RFC PATCH] arm64: add support for AES in CCM mode using Crypto Extensions   Ard Biesheuvel
• [RFC PATCH] arm64: add support for AES in CCM mode using Crypto Extensions   Ard Biesheuvel
• [PATCH resend 0/3] arm64: 32-bit compat hwcaps for Crypto Extensions   Ard Biesheuvel
• [PATCH resend 1/3] binfmt_elf: add ELF_HWCAP2 to compat auxv entries   Ard Biesheuvel
• [PATCH resend 2/3] arm64: add AT_HWCAP2 support for 32-bit compat   Ard Biesheuvel
• [PATCH resend 3/3] arm64: advertise ARMv8 extensions to 32-bit compat ELF binaries   Ard Biesheuvel
• [PATCH] ARM: kernel: respect device tree status of cpu nodes   Jürg Billeter
• Recent 3.x kernels: Memory leak causing OOMs   Maxime Bizon
• [RFC] ARM VM System Sepcification   Blibbet
• [PATCH] ARM: s3c24xx: get rid of unneeded selects   Paul Bolle
• [PATCH] ARM: OMAP2+: Remove MACH_NOKIA_N800   Paul Bolle
• [PATCH 26/28] Remove LOCAL_TIMERS   Paul Bolle
• [PATCH 28/28] Remove LOCAL_TIMERS   Paul Bolle
• [PATCH] ARM: multiplatform: remove reference to ARCH_MULTI_V4   Paul Bolle
• [PATCH 14/28] Remove MACH_SMDKC210   Paul Bolle
• [PATCH 14/28] Remove MACH_SMDKC210   Paul Bolle
• [PATCH] ASoC: smdk_wm8994: Fix typo "wm8894"   Paul Bolle
• [PATCH 14/28] Remove MACH_SMDKC210   Paul Bolle
• [PATCH] ARM: spear: Remove references to PLAT_SPEAR_SINGLE   Paul Bolle
• [PATCH] ARM: spear: Remove references to PLAT_SPEAR_SINGLE   Paul Bolle
• [PATCH] ARM: S3C24XX: Fix typo "CONFIG_CPUS_3C2443"   Paul Bolle
• [PATCH] ARM: OMAP2+: Remove legacy macros for zoom platforms   Paul Bolle
• [PATCH] arm: omap3: cm-t35: remove MACH_CM_T3730   Paul Bolle
• [PATCH] arm: msm: remove MACH_MSM7X30_SURF   Paul Bolle
• [PATCH] arm: imx: remove MACH_MXLADS   Paul Bolle
• [PATCH] arm: imx: remove MACH_MXLADS   Paul Bolle
• [PATCH] arm: omap: remove OMAP_PACKAGE_ZAC and OMAP_PACKAGE_ZAF   Paul Bolle
• [PATCH] arm: sti: Remove SOC_STIH415 and SOC_STIH416   Paul Bolle
• [PATCH] arm: imx: remove MACH_MXLADS   Paul Bolle
• [PATCH] arm: imx: remove MACH_MXLADS   Paul Bolle
• [PATCH] arm: msm: remove MACH_MSM7X30_SURF   Paul Bolle
• [PATCH] arm: sti: Remove SOC_STIH415 and SOC_STIH416   Paul Bolle
• [PATCH] arm: imx: remove MACH_MXLADS   Paul Bolle
• [PATCH] arm: omap3: cm-t35: remove MACH_CM_T3730   Paul Bolle
• [PATCH 14/28] Remove MACH_SMDKC210   Paul Bolle
• [PATCH v2 10/52] arm, kvm: Fix CPU hotplug callback registration   Paolo Bonzini
• [RFC] ARM VM System Sepcification   Paolo Bonzini
• [PATCH] arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT   Paolo Bonzini
• [RFC] ARM VM System Sepcification   Paolo Bonzini
• [PATCH] arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT   Paolo Bonzini
• [PATCH] Fix uses of dma_max_pfn() when converting to a limiting address   James Bottomley
• [PATCH] Fix uses of dma_max_pfn() when converting to a limiting address   James Bottomley
• [PATCH] ARM: footbridge: Switch to sched_clock_register()   Stephen Boyd
• Weird sched_clock behaviour during boot with -rc1   Stephen Boyd
• [PATCH v2 1/5] ARM: msm: kill off hotplug.c   Stephen Boyd
• [PATCH v2 2/5] clocksource: qcom: Move clocksource code out of mach-msm   Stephen Boyd
• [PATCH v2 2/5] clocksource: qcom: Move clocksource code out of mach-msm   Stephen Boyd
• [PATCH v2 3/5] arm: qcom: Split Qualcomm support into legacy and multiplatform   Stephen Boyd
• [PATCH v2 0/5] Split mach-msm into legacy and mach-qcom (multiplatform)   Stephen Boyd
• Weird sched_clock behaviour during boot with -rc1   Stephen Boyd
• [PATCH] sched_clock: Prevent callers from seeing half-updated data   Stephen Boyd
• [PATCH v3 0/7] Support Krait CPU PMUs   Stephen Boyd
• [PATCH v3 1/7] ARM: perf_event: Support percpu irqs for the CPU PMU   Stephen Boyd
• [PATCH v3 2/7] ARM: perf_event: Assign pdev pointer earlier for CPU PMUs   Stephen Boyd
• [PATCH v3 3/7] ARM: perf_event: Add basic support for Krait CPU PMUs   Stephen Boyd
• [PATCH v3 4/7] ARM: perf_event: Add hook for event index clearing   Stephen Boyd
• [PATCH v3 5/7] ARM: perf_event: Fully support Krait CPU PMU events   Stephen Boyd
• [PATCH v3 6/7] devicetree: bindings: Document Krait performance monitor units (PMU)   Stephen Boyd
• [PATCH v3 7/7] ARM: dts: msm: Add krait-pmu to platforms with Krait CPUs   Stephen Boyd
• [PATCH v2 02/10] genirq: Add devm_request_any_context_irq()   Stephen Boyd
• [PATCH v2 10/9] ARM: msm: Remove board-dt.c   Stephen Boyd
• [PATCH v2 1/5] ARM: msm: kill off hotplug.c   Stephen Boyd
• [PATCH] sched_clock: Prevent callers from seeing half-updated data   Stephen Boyd
• [PATCH v2] sched_clock: Prevent callers from seeing half-updated data   Stephen Boyd
• [Patch v5 1/2] dmaengine: add Qualcomm BAM dma driver   Stephen Boyd
• [PATCH v3 3/5] ARM: qcom: Split Qualcomm support into legacy and multiplatform   Stephen Boyd
• [PATCH] ARM: dts: qcom: Add RNG device tree node   Stephen Boyd
• [PATCH v3 2/5] clocksource: qcom: Move clocksource code out of mach-msm   Stephen Boyd
• [PATCH v3 0/7] Modernize pm8921 with irqdomains, regmap, DT   Stephen Boyd
• [PATCH] sched_clock: Prevent callers from seeing half-updated data   Stephen Boyd
• [PATCH v3 7/7] devicetree: bindings: Document PM8921/8058 PMICs   Stephen Boyd
• [PATCH v3 7/7] devicetree: bindings: Document PM8921/8058 PMICs   Stephen Boyd
• [PATCH] ARM: dts: qcom: Add RNG device tree node   Stephen Boyd
• [GIT PULL] qcom cleanups for v3.15   Stephen Boyd
• [PATCH v5 2/4] devicetree: bindings: Document Krait CPU/L1 EDAC   Stephen Boyd
• [GIT PULL] qcom cleanups for v3.15   Stephen Boyd
• [GIT PULL] qcom cleanups for v3.15   Stephen Boyd
• [PATCH] clk: qcom: Add missing clock at index GCC_XO_CLK for MSM8974   Stephen Boyd
• linux-next: manual merge of the arm-soc tree with the arm-perf tree   Stephen Boyd
• [PATCH v4 0/8] Modernize pm8921 with irqdomains, regmap, DT   Stephen Boyd
• [PATCH v4 1/8] mfd: Move pm8xxx-irq.c contents into only driver that uses it   Stephen Boyd
• [PATCH v4 2/8] mfd: pm8921: Update for genirq changes   Stephen Boyd
• [PATCH v4 3/8] mfd: pm8921: Migrate to irqdomains   Stephen Boyd
• [PATCH v4 4/8] mfd: ssbi: Add regmap read/write helpers   Stephen Boyd
• [PATCH v4 5/8] mfd: pm8921: Use ssbi regmap   Stephen Boyd
• [PATCH v4 6/8] mfd: pm8921: Add DT match table   Stephen Boyd
• [PATCH v4 7/8] mfd: pm8921: Loosen Kconfig dependency   Stephen Boyd
• [PATCH v4 8/8] devicetree: bindings: Document PM8921/8058 PMICs   Stephen Boyd
• [PATCH v3 0/9] Use regmap+devm+DT in pm8xxx input drivers   Stephen Boyd
• [PATCH v3 1/9] Input: pmic8xxx-pwrkey - Migrate to regmap APIs   Stephen Boyd
• [PATCH v3 2/9] Input: pmic8xxx-keypad - Migrate to devm_* APIs   Stephen Boyd
• [PATCH v3 3/9] Input: pmic8xxx-keypad - Migrate to regmap APIs   Stephen Boyd
• [PATCH v3 4/9] Input: pmic8xxx-pwrkey - Migrate to DT   Stephen Boyd
• [PATCH v3 5/9] Input: pm8xxx-vibrator - Add DT match table   Stephen Boyd
• [PATCH v3 6/9] Input: pmic8xxx-keypad - Migrate to DT   Stephen Boyd
• [PATCH v3 7/9] devicetree: bindings: Document PM8921/8058 keypads   Stephen Boyd
• [PATCH v3 8/9] devicetree: bindings: Document PM8921/8058 power keys   Stephen Boyd
• [PATCH v3 9/9] devicetree: bindings: Document PM8921/8058 vibrators   Stephen Boyd
• [PATCH] devicetree: bindings: Make msm8974-pinctrl documentation match code   Stephen Boyd
• [PATCH v3 1/9] Input: pmic8xxx-pwrkey - Migrate to regmap APIs   Stephen Boyd
• [PATCH v3 1/9] Input: pmic8xxx-pwrkey - Migrate to regmap APIs   Stephen Boyd
• [PATCH v3 2/9] Input: pmic8xxx-keypad - Migrate to devm_* APIs   Stephen Boyd
• [PATCH v3 1/9] Input: pmic8xxx-pwrkey - Migrate to regmap APIs   Stephen Boyd
• [PATCH 0/3] Add qcom_defconfig and update msm_defconfig   Stephen Boyd
• [PATCH 1/3] ARM: config: Add qcom_defconfig   Stephen Boyd
• [PATCH 2/3] ARM: msm: Silence readb/writeb warnings due to missing IOMEM()   Stephen Boyd
• [PATCH 3/3] ARM: config: Update msm_defconfig   Stephen Boyd
• [PATCH 1/3] ARM: config: Add qcom_defconfig   Stephen Boyd
• [PATCH v1.1/3] ARM: config: Add qcom_defconfig   Stephen Boyd
• [PATCH v6 2/2] ARM hibernation / suspend-to-disk   Stephen Boyd
• [PATCH v4 0/9] Use regmap+devm+DT in pm8xxx input drivers   Stephen Boyd
• [PATCH v4 1/9] Input: pmic8xxx-keypad - Fix build by removing gpio configuration   Stephen Boyd
• [PATCH v4 2/9] Input: pmic8xxx-keypad - Migrate to devm_* APIs   Stephen Boyd
• [PATCH v4 3/9] Input: pmic8xxx-keypad - Migrate to regmap APIs   Stephen Boyd
• [PATCH v4 4/9] Input: pmic8xxx-keypad - Migrate to DT   Stephen Boyd
• [PATCH v4 5/9] Input: pmic8xxx-pwrkey - Migrate to DT   Stephen Boyd
• [PATCH v4 6/9] Input: pm8xxx-vibrator - Add DT match table   Stephen Boyd
• [PATCH v4 7/9] devicetree: bindings: Document PM8921/8058 keypads   Stephen Boyd
• [PATCH v4 8/9] devicetree: bindings: Document PM8921/8058 power keys   Stephen Boyd
• [PATCH v4 9/9] devicetree: bindings: Document PM8921/8058 vibrators   Stephen Boyd
• [PATCH v6 2/2] ARM hibernation / suspend-to-disk   Stephen Boyd
• [PATCH] ARM: qcom: Enable basic support for Qualcomm platforms in multi_v7_defconfig   Stephen Boyd
• [PATCH v4 4/9] Input: pmic8xxx-keypad - Migrate to DT   Stephen Boyd
• [PATCH v4 5/9] Input: pmic8xxx-pwrkey - Migrate to DT   Stephen Boyd
• [PATCH v4 7/9] devicetree: bindings: Document PM8921/8058 keypads   Stephen Boyd
• static asmlinkage in irqchip (was Re: next build: 78 warnings 0 failures (next/next-20140228))   Stephen Boyd
• [PATCH] ARM: enable IRQs in user undefined instruction vector   Kevin Bracey
• [PATCH] ARM: enable IRQs in user undefined instruction vector   Kevin Bracey
• [PATCH v3 1/3] dma: Support multiple interleaved frames with non-contiguous memory   Jassi Brar
• [PATCH v3 1/3] dma: Support multiple interleaved frames with non-contiguous memory   Jassi Brar
• [PATCH v3 1/3] dma: Support multiple interleaved frames with non-contiguous memory   Jassi Brar
• [PATCH v3 1/3] dma: Support multiple interleaved frames with non-contiguous memory   Jassi Brar
• I2C dummy adapter driver ?   Jassi Brar
• [PATCH v3 1/3] dma: Support multiple interleaved frames with non-contiguous memory   Jassi Brar
• [PATCH v3 1/3] dma: Support multiple interleaved frames with non-contiguous memory   Jassi Brar
• [PATCH v2 1/6] audit: Enable arm64 support   Richard Guy Briggs
• [PATCH v2 1/6] audit: Enable arm64 support   Richard Guy Briggs
• [PATCH] arm64: make a single hook to syscall_trace() for all syscall features   Richard Guy Briggs
• [PATCH v4 0/3] arm64: Add audit support   Richard Guy Briggs
• [PATCH v2 1/1] audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL   Richard Guy Briggs
• [PATCH v6 2/2] arm64: audit: Add audit hook in ptrace/syscall_trace   Richard Guy Briggs
• [PATCH v3 0/7] ARM: zynq: cpufreq support   Soren Brinkmann
• [PATCH v3 1/7] time: Serialize calls to 'clockevents_update_freq' in the timing core   Soren Brinkmann
• [PATCH v3 2/7] time: clockevents: Adjust timer interval when frequency changes   Soren Brinkmann
• [PATCH v3 3/7] clocksource/cadence_ttc: Call clockevents_update_freq() with IRQs enabled   Soren Brinkmann
• [PATCH v3 4/7] clocksource/cadence_ttc: Overhaul clocksource frequency adjustment   Soren Brinkmann
• [PATCH v3 5/7] clocksource/cadence_ttc: Use only one counter   Soren Brinkmann
• [PATCH v3 6/7] arm: zynq: Don't use arm_global_timer with cpufreq   Soren Brinkmann
• [PATCH v3 7/7] arm: zynq: Add support for cpufreq   Soren Brinkmann
• [PATCH] ARM: smp_twd: Set the CLOCK_EVT_FEAT_PERCPU flag   Soren Brinkmann
• [PATCH v4 0/4] ARM: zynq: cpufreq support   Soren Brinkmann
• [PATCH v4 1/4] clocksource/cadence_ttc: Call clockevents_update_freq() with IRQs enabled   Soren Brinkmann
• [PATCH v4 2/4] clocksource/cadence_ttc: Overhaul clocksource frequency adjustment   Soren Brinkmann
• [PATCH v4 3/4] arm: zynq: Don't use arm_global_timer with cpufreq   Soren Brinkmann
• [PATCH v4 4/4] arm: zynq: Add support for cpufreq   Soren Brinkmann
• [PATCH RFC 0/3] clk: CCF clock primitives + custom IO accessors   Soren Brinkmann
• [PATCH RFC 1/3] clk: Introduce I2C clock primitives   Soren Brinkmann
• [PATCH RFC 2/3] clk/i2c-div: Allow custom divider accessors   Soren Brinkmann
• [PATCH RFC 3/3] clk: Add driver for TI CDCE913   Soren Brinkmann
• [PATCH 1/2] i2c: Add driver for Cadence I2C controller   Soren Brinkmann
• [PATCH 2/2] ARM: zynq: dt: Add I2C nodes to Zynq device tree   Soren Brinkmann
• [PATCH] clk: Fix notifier documentation   Sören Brinkmann
• [PATCH] ARM: zynq: Move of_clk_init from clock driver   Sören Brinkmann
• [PATCH v3 5/7] clocksource/cadence_ttc: Use only one counter   Sören Brinkmann
• ccf: where to put constraints?   Sören Brinkmann
• ccf: where to put constraints?   Sören Brinkmann
• ccf: where to put constraints?   Sören Brinkmann
• [PATCH v4 0/4] ARM: zynq: cpufreq support   Sören Brinkmann
• [PATCH 2/2] ARM: zynq: dt: Add I2C nodes to Zynq device tree   Sören Brinkmann
• [PATCH 1/2] i2c: Add driver for Cadence I2C controller   Sören Brinkmann
• [PATCH 3/3] ARM: config: Update msm_defconfig   David Brown
• [PATCH 0/3] spi: core: Introduce devm_spi_alloc_master   Mark Brown
• [PATCH v5 00/23]   Mark Brown
• [PATCH v3 3/5] spi: sunxi: Add Allwinner A31 SPI controller driver   Mark Brown
• [PATCH v3 3/5] spi: sunxi: Add Allwinner A31 SPI controller driver   Mark Brown
• [PATCH] regulator: core: Make regulator object reflect configured voltage   Mark Brown
• [PATCH v3 2/5] ASoC: tda998x: add a codec driver for the TDA998x   Mark Brown
• [PATCH 3/6] mfd: add bcm59056 pmu driver   Mark Brown
• [PATCH 08/17] spi: pl022: Fully gate clocks at request inactivity   Mark Brown
• [PATCH 3/6] mfd: add bcm59056 pmu driver   Mark Brown
• [PATCH 2/6] regulator: add bcm59056 pmu DT binding   Mark Brown
• [PATCH 4/6] regulator: add bcm59056 regulator driver   Mark Brown
• [PATCH 00/11] ARM: shmobile: RSPI RZ and QSPI SoC and board integration   Mark Brown
• [alsa-devel] [PATCH v3 2/5] ASoC: tda998x: add a codec driver for the TDA998x   Mark Brown
• [PATCH v3 2/5] ASoC: tda998x: add a codec driver for the TDA998x   Mark Brown
• [PATCH v3 4/5] ASoC: tda998x: adjust the audio hw parameters from EDID   Mark Brown
• [PATCH v3 5/5] ASoC: tda998x: adjust the audio CTS_N pre-divider from audio format   Mark Brown
• [PATCH v3 3/5] ASoC: tda998x: add DT documentation of the tda998x CODEC   Mark Brown
• [PATCH] regulator: core: Make regulator object reflect configured voltage   Mark Brown
• Extending OPP bindings   Mark Brown
• [PATCH 00/17] amba: PM fixups for amba bus and some amba drivers   Mark Brown
• [PATCH 07/17] spi: pl022: Don't ignore power domain and amba bus at system suspend   Mark Brown
• [PATCH 09/17] spi: pl022: Simplify clock handling   Mark Brown
• [PATCH 10/17] spi: pl022: Remove redundant pinctrl to default state in probe   Mark Brown
• [PATCH v3 2/5] ASoC: tda998x: add a codec driver for the TDA998x   Mark Brown
• [PATCH v3 3/5] ASoC: tda998x: add DT documentation of the tda998x CODEC   Mark Brown
• [PATCH] regulator: core: Make regulator object reflect configured voltage   Mark Brown
• Extending OPP bindings   Mark Brown
• [PATCH 2/6] regulator: add bcm59056 pmu DT binding   Mark Brown
• [PATCH 4/6] regulator: add bcm59056 regulator driver   Mark Brown
• [alsa-devel] [PATCH v3 4/5] ASoC: tda998x: adjust the audio hw parameters from EDID   Mark Brown
• [alsa-devel] [PATCH v3 4/5] ASoC: tda998x: adjust the audio hw parameters from EDID   Mark Brown
• [PATCH 05/17] mmc: mmci: Put the device into low power state at system suspend   Mark Brown
• [PATCH v4 3/5] spi: sunxi: Add Allwinner A31 SPI controller driver   Mark Brown
• How to support SDIO wifi/bt in DT   Mark Brown
• [PATCH] regulator: core: Make regulator object reflect configured voltage   Mark Brown
• [PATCH] regulator: core: Allow regulator_set_voltage for fixed regulators   Mark Brown
• [PATCH v2 13/15] regulator/mfd: max14577: Export symbols for calculating charger current   Mark Brown
• [PATCH 14/28] Remove MACH_SMDKC210   Mark Brown
• [PATCH 07/17] spi: pl022: Don't ignore power domain and amba bus at system suspend   Mark Brown
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 2/4] arm64: topology: Add support for topology DT bindings   Mark Brown
• [PATCH 3/4] arm64: topology: Tell the scheduler about the relative power of cores   Mark Brown
• [PATCH 4/4] arm64: topology: Provide relative power numbers for cores   Mark Brown
• [PATCH] ASoC: fsl: fix pm support of machine drivers   Mark Brown
• [PATCH 14/28] Remove MACH_SMDKC210   Mark Brown
• [alsa-devel] [PATCH 0/7] Audio support for Armada 370 DB   Mark Brown
• [PATCH 14/28] Remove MACH_SMDKC210   Mark Brown
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Mark Brown
• [alsa-devel] [PATCH 0/7] Audio support for Armada 370 DB   Mark Brown
• [PATCH 4/7] spi: pl022: attempt to get sspclk by name   Mark Brown
• [PATCH 1/7] sound: codec: add Device Tree binding to cs42l51   Mark Brown
• [PATCH 2/7] sound: soc: enable Kirkwood driver for mvebu platforms   Mark Brown
• [PATCH 3/7] sound: soc: add ASoC board driver for Armada 370 DB   Mark Brown
• [PATCH] ASoC: smdk_wm8994: Fix typo "wm8894"   Mark Brown
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 2/4] arm64: topology: Add support for topology DT bindings   Mark Brown
• [PATCH 3/4] arm64: topology: Tell the scheduler about the relative power of cores   Mark Brown
• [PATCH 4/4] arm64: topology: Provide relative power numbers for cores   Mark Brown
• [PATCH 4/7] spi: pl022: attempt to get sspclk by name   Mark Brown
• [PATCH] arm64: smp: Add a memory barrier before we start secondary cores   Mark Brown
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH] arm64: smp: Add a memory barrier before we start secondary cores   Mark Brown
• [PATCH] arm64: smp: Add a memory barrier before we start secondary cores   Mark Brown
• [PATCH 4/7] spi: pl022: attempt to get sspclk by name   Mark Brown
• [PATCH 14/28] Remove MACH_SMDKC210   Mark Brown
• [PATCH 4/7] spi: pl022: attempt to get sspclk by name   Mark Brown
• [PATCH 3/3] mfd: axp20x: Add bindings documentation   Mark Brown
• [linux-sunxi] Re: [PATCH 3/3] mfd: axp20x: Add bindings documentation   Mark Brown
• [PATCH v3 0/2] ASoC: atmel_ssc_dai: add option to choose clock   Mark Brown
• [PATCH 1/3] mmc: add support for power-on sequencing through DT   Mark Brown
• [PATCH] arm64: smp: Add a memory barrier before we start secondary cores   Mark Brown
• [PATCH v2 1/7] sound: ASoC: add ASoC board driver for Armada 370 DB   Mark Brown
• [PATCH v4 1/2] spi:fsl-dspi:convert to use regmap and big-endian supports   Mark Brown
• [PATCH v4 1/2] spi:fsl-dspi:convert to use regmap and big-endian supports   Mark Brown
• [PATCH RFC v3 3/3] Documentation: arm: define DT idle states bindings   Mark Brown
• [RFC PATCH 1/3] regmap: Separate regmap dev initialization   Mark Brown
• [PATCH 1/3] mmc: add support for power-on sequencing through DT   Mark Brown
• [PATCH RFC v3 3/3] Documentation: arm: define DT idle states bindings   Mark Brown
• [PATCH] regulator: core bugfix: Use normal enable for always_on regulators   Mark Brown
• [PATCH] regulator: core bugfix: Use normal enable for always_on regulators   Mark Brown
• PMIC driver prevents gpio-leds to work   Mark Brown
• [PATCH v2 5/5] ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap   Mark Brown
• [PATCH v2 2/5] mfd: add bcm590xx pmu driver   Mark Brown
• [PATCH v2 1/5] mfd: add bcm590xx pmu DT binding   Mark Brown
• [PATCH v2 3/5] regulator: add bcm590xx regulator driver   Mark Brown
• [RFC PATCH v2 1/2] mfd: syscon: Support early initialization   Mark Brown
• [RFC PATCH v2 1/2] mfd: syscon: Support early initialization   Mark Brown
• [PATCH v3 02/15] mfd: max14577: Rename and add MAX14577 symbols to prepare for max77836   Mark Brown
• [PATCH 06/17] spi: pl022: Let runtime PM callbacks be available for CONFIG_PM   Mark Brown
• [Patch v3 18/23] drivers: Enable building of Kirkwood drivers for mach-mvebu   Mark Brown
• [PATCH v2 2/2] regulator: core: Replace direct ops->disable usage   Mark Brown
• [PATCH v2 2/2] regulator: core: Replace direct ops->disable usage   Mark Brown
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 1/7] spi: sunxi: Add Allwinner A10 SPI controller driver   Mark Brown
• [PATCH v3 0/2] regulator: core: Fix ops->enable/disable usage   Mark Brown
• [RFC PATCH 3/6] PM / Voltagedomain: introduce voltage domain driver support   Mark Brown
• [PATCH] cpufreq: enable ARM drivers on arm64   Mark Brown
• linux-next: manual merge of the sound-asoc tree with the mvebu tree   Mark Brown
• Linux-3.13.5/Samsung S3C6410/Mini6410: What does this warning mean?   Mark Brown
• [PATCH v3 0/2] regulator: core: Fix ops->enable/disable usage   Mark Brown
• [Patch v7 2/2] dmaengine: add Qualcomm BAM dma driver   Mark Brown
• [PATCH 0/4] arm64: topology: CPU topology support   Mark Brown
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 2/4] arm64: topology: Add support for topology DT bindings   Mark Brown
• [PATCH 3/4] arm64: topology: Tell the scheduler about the relative power of cores   Mark Brown
• [PATCH 4/4] arm64: topology: Provide relative power numbers for cores   Mark Brown
• [PATCH 1/2] ARM: ux500: switch SSP/SPI clock name to "SSPCLK"   Mark Brown
• [PATCH 2/2] ARM: u300: switch SSP/SPI clock name to "SSPCLK"   Mark Brown
• [PATCH 2/2] regulator: core: Error on not always_on dummy regulators   Mark Brown
• [PATCH 1/2] regulator: dummy: Should be always-on   Mark Brown
• [PATCH 0/4] arm64: Topology   Mark Brown
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 2/4] arm64: topology: Add support for topology DT bindings   Mark Brown
• [PATCH 3/4] arm64: topology: Tell the scheduler about the relative power of cores   Mark Brown
• [PATCH 4/4] arm64: topology: Provide relative power numbers for cores   Mark Brown
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 1/3] Documentation:spi:fsl-dspi:add DSPI dma transfer support   Mark Brown
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 2/4] ARM: dove: prepare new Dove DT Kconfig variable   Mark Brown
• [PATCH V2 1/3] dt: palmas: support IRQ inversion at the board level   Mark Brown
• I2C dummy adapter driver ?   Mark Brown
• [PATCH V2 1/3] dt: palmas: support IRQ inversion at the board level   Mark Brown
• [PATCH 14/28] Remove MACH_SMDKC210   Mark Brown
• [PATCH v6 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Matthias Brugger
• [PATCH 1/2] clocksource: sunxi: Add new compatibles   Gregory CLEMENT
• [PATCH 0/4] clk: mvebu: fix clk init order   Gregory CLEMENT
• [PATCH] clk: respect the clock dependencies in of_clk_init   Gregory CLEMENT
• [PATCH] clk: add strict of_clk_init dependency check   Gregory CLEMENT
• [PATCH] clk: add strict of_clk_init dependency check   Gregory CLEMENT
• mv64xxx: I2C bus locked when scanning absent devices on Armada XP   Gregory CLEMENT
• [PATCH] i2c: mv64xxx: Fix locked bus when offload is selected but not used on a message   Gregory CLEMENT
• mv64xxx: I2C bus locked when scanning absent devices on Armada XP   Gregory CLEMENT
• [PATCH] clk: respect the clock dependencies in of_clk_init   Gregory CLEMENT
• [PATCH] clk: respect the clock dependencies in of_clk_init   Gregory CLEMENT
• [PATCH] i2c: mv64xxx: Fix locked bus when offload is selected but not used on a message   Gregory CLEMENT
• [PATCH] clk: respect the clock dependencies in of_clk_init   Gregory CLEMENT
• [PATCH 0/6] Marvell Armada 375 and 38x clocks drivers   Gregory CLEMENT
• [PATCH 1/6] clk: mvebu: add clock support for Armada 375   Gregory CLEMENT
• [PATCH 2/6] dt: Update binding information for mvebu core clocks with Armada 375   Gregory CLEMENT
• [PATCH 3/6] dt: Update binding information for mvebu gating clocks with Armada 375   Gregory CLEMENT
• [PATCH 4/6] clk: mvebu: add clock support for Armada 380/385   Gregory CLEMENT
• [PATCH 5/6] dt: Update binding information for mvebu core clocks with Armada 380/385   Gregory CLEMENT
• [PATCH 6/6] dt: Update binding information for mvebu gating clocks with Armada 380/385   Gregory CLEMENT
• [PATCH 04/11] ARM: mvebu: add Device Tree description of the Armada 375 SoC   Gregory CLEMENT
• [PATCH v2] clk: respect the clock dependencies in of_clk_init   Gregory CLEMENT
• [PATCH 0/2] Marvell Armada 375 and 38x timer support   Gregory CLEMENT
• [PATCH 06/11] ARM: mvebu: add Armada 380/385 support to the system-controller driver   Gregory CLEMENT
• [PATCH 4/8] ARM: mvebu: make use of of_find_matching_node_and_match   Gregory CLEMENT
• [PATCH 1/3] ARM: mvebu: remove unneeded ->map_io field for Armada 370/XP   Gregory CLEMENT
• [PATCH 2/3] ARM: mvebu: use GPIO DT defines in Armada 370/XP boards   Gregory CLEMENT
• [PATCH 3/3] ARM: mvebu: use input DT defines in Armada 370/XP boards   Gregory CLEMENT
• [PATCH v4 1/8] at91: dt: Adds support for the bus matrix declaration in the DT   Gregory CLEMENT
• [PATCH v4 0/8] Device Tree support for the at91sam9261ek   Gregory CLEMENT
• [PATCH] i2c: mv64xxx: Fix locked bus when offload is selected but not used on a message   Gregory CLEMENT
• [PATCH v4 00/13] CPU idle for Armada XP   Gregory CLEMENT
• [PATCH v4 01/13] ARM: PJ4B: Add cpu_suspend/cpu_resume hooks for PJ4B   Gregory CLEMENT
• [PATCH v4 02/13] ARM: mvebu: remove the address parameter for ll_set_cpu_coherent   Gregory CLEMENT
• [PATCH v4 03/13] ARM: mvebu: ll_set_cpu_coherent always uses the current CPU   Gregory CLEMENT
• [PATCH v4 04/13] ARM: mvebu: Remove the unused argument of set_cpu_coherent()   Gregory CLEMENT
• [PATCH v4 05/13] ARM: mvebu: Low level function to disable HW coherency support   Gregory CLEMENT
• [PATCH v4 06/13] ARM: mvebu: Add a new set of registers for pmsu   Gregory CLEMENT
• [PATCH v4 07/13] ARM: dts: mvebu: Add a new set of registers to the PMSU node   Gregory CLEMENT
• [PATCH v4 08/13] ARM: mvebu: Allow to power down L2 cache controller in idle mode   Gregory CLEMENT
• [PATCH v4 09/13] ARM: mvebu: Add the PMSU related part of the cpu idle functions   Gregory CLEMENT
• [PATCH v4 10/13] ARM: mvebu: Set the start address of a CPU in a separate function   Gregory CLEMENT
• [PATCH v4 11/13] ARM: mvebu: Register notifier callback for the cpuidle transition   Gregory CLEMENT
• [PATCH v4 12/13] cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoC   Gregory CLEMENT
• [PATCH v4 13/13] ARM: mvebu: register the cpuidle driver for the Armada XP SoCs   Gregory CLEMENT
• [PATCH 0/5] mv64xxx updates   Gregory CLEMENT
• [PATCH 1/5] i2c: mv64xxx: put offload check into offload prepare function   Gregory CLEMENT
• [PATCH 2/5] i2c: mv64xxx: refactor message start to ensure proper initialization   Gregory CLEMENT
• [PATCH 3/5] i2c: mv64xxx: refactor send_start   Gregory CLEMENT
• [PATCH 0/4] clk: mvebu: fix clk init order   Gregory CLEMENT
• [PATCH v2] clk: respect the clock dependencies in of_clk_init   Gregory CLEMENT
• [PATCH 0/4] clk: mvebu: fix clk init order   Gregory CLEMENT
• [PATCH 0/4] clk: mvebu: fix clk init order   Gregory CLEMENT
• [PATCH 0/4] clk: mvebu: fix clk init order   Gregory CLEMENT
• [PATCH 0/4] clk: mvebu: fix clk init order   Gregory CLEMENT
• [GIT PULL] clk: mvebu: fixes for v3.14   Gregory CLEMENT
• [PATCH v4 03/13] ARM: mvebu: ll_set_cpu_coherent always uses the current CPU   Gregory CLEMENT
• [PATCH v4 13/13] ARM: mvebu: register the cpuidle driver for the Armada XP SoCs   Gregory CLEMENT
• [PATCH v4 12/13] cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoC   Gregory CLEMENT
• [PATCH v4 07/13] ARM: dts: mvebu: Add a new set of registers to the PMSU node   Gregory CLEMENT
• [PATCH 0/2] Translate of PCI address without PCI enabled   Gregory CLEMENT
• [PATCH 1/2] of: Allows to use the PCI translator without the PCI core   Gregory CLEMENT
• [PATCH 2/2] ARM: mvebu: Allows to get the SoC ID even without PCI enabled   Gregory CLEMENT
• [PATCH 1/3] ARM: mvebu: use C preprocessor include for Armada 375/38x DTs   Gregory CLEMENT
• [PATCH 2/3] ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs   Gregory CLEMENT
• [PATCH 3/3] ARM: mvebu: use macros for interrupt flags on Armada 375/38x   Gregory CLEMENT
• [PATCH] arm: removed compiler warning   Gregory CLEMENT
• [GIT PULL] clk: mvebu: fixes for v3.14   Gregory CLEMENT
• [PATCH v2] clk: respect the clock dependencies in of_clk_init   Gregory CLEMENT
• [PATCH v3] clk: respect the clock dependencies in of_clk_init   Gregory CLEMENT
• [PATCH v2 1/5] i2c: mv64xxx: Add reset deassert call   Gregory CLEMENT
• [PATCH v2 2/5] i2c: mv64xxx: Add support for the Allwinner A31 I2C driver   Gregory CLEMENT
• [PATCH v3] clk: respect the clock dependencies in of_clk_init   Gregory CLEMENT
• [PATCH] usb: gadget: atmel_usba: Fix crashed during stopping when DEBUG is enabled   Gregory CLEMENT
• [PATCH] usb: gadget: atmel_usba: Fix crashed during stopping when DEBUG is enabled   Gregory CLEMENT
• [PATCH 0/5] Add STiH407 SoC and reference board support   Maxime COQUELIN
• [PATCH 1/5] ARM: STi: Add STiH407 SoC support   Maxime COQUELIN
• [PATCH 2/5] ARM: STi: add pinctrl support for the STiH407 SoC   Maxime COQUELIN
• [PATCH 3/5] pinctrl: st: Enhance the controller to manage unavailable registers   Maxime COQUELIN
• [PATCH 4/5] ARM: dts: Add STiH407 SoC support   Maxime COQUELIN
• [PATCH 5/5] ARM: dts: STiH407: Add B2120 board support   Maxime COQUELIN
• [PATCH v3 07/11] watchdog: xilinx: Use of_property_read_u32   Alejandro Cabrera
• [PATCH v3 07/11] watchdog: xilinx: Use of_property_read_u32   Alejandro Cabrera
• [PATCH v3 07/11] watchdog: xilinx: Use of_property_read_u32   Alejandro Cabrera
• [PATCH v3 07/11] watchdog: xilinx: Use of_property_read_u32   Alejandro Cabrera
• [PATCH v3 07/11] watchdog: xilinx: Use of_property_read_u32   Alejandro Cabrera
• [PATCH] irq: Add new flag to ack level-triggered interrupts before unmasking   Carlo Caione
• [linux-sunxi] Re: [PATCH] irq: Add new flag to ack level-triggered interrupts before unmasking   Carlo Caione
• [linux-sunxi] Re: [PATCH] irq: Add new flag to ack level-triggered interrupts before unmasking   Carlo Caione
• [linux-sunxi] Re: [PATCH] irq: Add new flag to ack level-triggered interrupts before unmasking   Carlo Caione
• [linux-sunxi] Re: [PATCH] irq: Add new flag to ack level-triggered interrupts before unmasking   Carlo Caione
• [PATCH 0/3] mfd: axp20x: Add support for PMIC axp202 and axp209   Carlo Caione
• [PATCH 1/3] mfd: axp20x: Add mfd driver for axp20x PMIC   Carlo Caione
• [PATCH 2/3] mfd: axp20x: Add dtsi for axp20x   Carlo Caione
• [PATCH 3/3] mfd: axp20x: Add bindings documentation   Carlo Caione
• [PATCH 0/2] input: misc: Add support for axp20x Power Enable Key   Carlo Caione
• [PATCH 1/2] input: misc: Add driver for axp20x power enable key   Carlo Caione
• [PATCH 2/2] input: misc: dts: Add axp20x-pek node to axp20x.dtsi   Carlo Caione
• [linux-sunxi] Re: [PATCH 2/3] mfd: axp20x: Add dtsi for axp20x   Carlo Caione
• [PATCH 2/3] mfd: axp20x: Add dtsi for axp20x   Carlo Caione
• [linux-sunxi] Re: [PATCH 1/3] mfd: axp20x: Add mfd driver for axp20x PMIC   Carlo Caione
• [linux-sunxi] Re: [PATCH 3/3] mfd: axp20x: Add bindings documentation   Carlo Caione
• [linux-sunxi] Re: [PATCH 1/3] mfd: axp20x: Add mfd driver for axp20x PMIC   Carlo Caione
• [linux-sunxi] Re: [PATCH 3/3] mfd: axp20x: Add bindings documentation   Carlo Caione
• [linux-sunxi] Re: [PATCH 1/3] mfd: axp20x: Add mfd driver for axp20x PMIC   Carlo Caione
• [linux-sunxi] Re: [PATCH 1/3] mfd: axp20x: Add mfd driver for axp20x PMIC   Carlo Caione
• [PATCH v4 0/3] ARM: sun7i/sun6i: irqchip: Irqchip driver for NMI   Carlo Caione
• [PATCH v4 1/3] ARM: sun7i/sun6i: irqchip: Add irqchip driver for NMI controller   Carlo Caione
• [PATCH v4 2/3] ARM: sun7i/sun6i: dts: Add NMI irqchip support   Carlo Caione
• [PATCH v4 3/3] ARM: sun7i/sun6i: irqchip: Update the documentation   Carlo Caione
• [PATCH v3 4/6] iio: Add ABI docs for pulse capture devices   Jonathan Cameron
• [PATCH v3 3/6] iio: enable selection and build of pulse drivers   Jonathan Cameron
• [PATCH v3 6/6] ARM: dts: AM33XX: Add ecap interrupt properties   Jonathan Cameron
• [PATCH v3 0/6] IIO pulse capture support for TI ECAP   Jonathan Cameron
• [PATCH v3 2/6] iio: pulse: add TI ECAP driver   Jonathan Cameron
• [PATCHv6] staging/iio/adc: change the MXS touchscreen driver implementation   Jonathan Cameron
• [PATCH] staging/iio/adc/MXS/LRADC: fix touchscreen statemachine   Jonathan Cameron
• [PATCH] staging/iio/adc/MXS/LRADC: fix touchscreen statemachine   Jonathan Cameron
• [PATCH] arm: document "mach-virt" platform.   Ian Campbell
• [PATCH 4/4] ARM: Kirkwood: Add support for many Synology NAS devices   Ian Campbell
• [PATCH 4/4] ARM: Kirkwood: Add support for many Synology NAS devices   Ian Campbell
• [PATCH 4/4] ARM: Kirkwood: Add support for many Synology NAS devices   Ian Campbell
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Ian Campbell
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Ian Campbell
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Ian Campbell
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Ian Campbell
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Ian Campbell
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Ian Campbell
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Ian Campbell
• [PATCH 2/2] arm/xen: Don't use xen DMA ops when the device is protected by an IOMMU   Ian Campbell
• [PATCH 2/2] arm/xen: Don't use xen DMA ops when the device is protected by an IOMMU   Ian Campbell
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Ian Campbell
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Ian Campbell
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Ian Campbell
• [PATCH 1/1] ARM: dts: omap3-igep: fix boot fail due wrong compatible match   Javier Martinez Canillas
• [PATCH 2/2] ARM: dts: duovero-parlor: Add HDMI output   Javier Martinez Canillas
• [PATCH 1/1] ARM: dts: omap3-igep: fix boot fail due wrong compatible match   Javier Martinez Canillas
• [PATCH 1/1] ARM: dts: omap3-igep: fix boot fail due wrong compatible match   Javier Martinez Canillas
• [PATCH RFC v3 3/3] Documentation: arm: define DT idle states bindings   Sebastian Capella
• [PATCH RFC v3 3/3] Documentation: arm: define DT idle states bindings   Sebastian Capella
• [PATCH RFC v3 3/3] Documentation: arm: define DT idle states bindings   Sebastian Capella
• [PATCH RFC v1 0/3] hibernation support on ARM   Sebastian Capella
• [PATCH RFC v1 1/3] ARM: Add irq disabled version of soft_restart.   Sebastian Capella
• [PATCH RFC v1 2/3] Fix hibernation restore hang in freeze_processes   Sebastian Capella
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Sebastian Capella
• [PATCH RFC v4 3/3] Documentation: arm: define DT idle states bindings   Sebastian Capella
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Sebastian Capella
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Sebastian Capella
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Sebastian Capella
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Sebastian Capella
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Sebastian Capella
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Sebastian Capella
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Sebastian Capella
• [linux-pm] ARM hibernation / suspend-to-disk   Sebastian Capella
• [PATCH RFC v1 1/3] ARM: Add irq disabled version of soft_restart.   Sebastian Capella
• [PATCH RFC v1 1/3] ARM: Add irq disabled version of soft_restart.   Sebastian Capella
• [PATCH v2 0/3] hibernation support on ARM   Sebastian Capella
• [PATCH v2 1/3] ARM: Add irq disabled version of soft_restart.   Sebastian Capella
• [PATCH v2 2/3] Fix hibernation restore hang in freeze_processes   Sebastian Capella
• [PATCH v2 3/3] ARM hibernation / suspend-to-disk   Sebastian Capella
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Sebastian Capella
• [PATCH RFC v1 1/3] ARM: Add irq disabled version of soft_restart.   Sebastian Capella
• [PATCH v3 0/3] hibernation support on ARM   Sebastian Capella
• [PATCH v3 1/3] Fix hibernation restore hang in freeze_processes   Sebastian Capella
• [PATCH v3 2/3] ARM: avoid tracers in soft_restart   Sebastian Capella
• [PATCH v3 3/3] ARM hibernation / suspend-to-disk   Sebastian Capella
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Sebastian Capella
• [PATCH v4 0/2] hibernation support on ARM   Sebastian Capella
• [PATCH v4 0/2] hibernation support on ARM   Sebastian Capella
• [PATCH v4 1/2] ARM: avoid tracers in soft_restart   Sebastian Capella
• [PATCH v4 2/2] ARM hibernation / suspend-to-disk   Sebastian Capella
• [PATCH v5 0/2] hibernation support on ARM   Sebastian Capella
• [PATCH v5 1/2] ARM: avoid tracers in soft_restart   Sebastian Capella
• [PATCH v5 2/2] ARM hibernation / suspend-to-disk   Sebastian Capella
• [PATCH v4 1/2] ARM: avoid tracers in soft_restart   Sebastian Capella
• [PATCH v6 0/2] hibernation support on ARM   Sebastian Capella
• [PATCH v6 1/2] ARM: avoid tracers in soft_restart   Sebastian Capella
• [PATCH v6 2/2] ARM hibernation / suspend-to-disk   Sebastian Capella
• [PATCH v6 2/2] ARM hibernation / suspend-to-disk   Sebastian Capella
• [PATCH v6 2/2] ARM hibernation / suspend-to-disk   Sebastian Capella
• [PATCH 0/3] arm64: Use pte manipulation functions for THP   Steve Capper
• [PATCH 1/3] arm64: mm: Remove PMD_BIT_FUNC macro   Steve Capper
• [PATCH 2/3] arm64: mm: Route pmd thp functions through pte equivalents   Steve Capper
• [PATCH 3/3] arm64: mm: Correct definition of pmd_mknotpresent   Steve Capper
• [RFC PATCH V2 0/4] get_user_pages_fast for ARM and ARM64   Steve Capper
• [RFC PATCH V2 1/4] arm: mm: Enable HAVE_RCU_TABLE_FREE logic   Steve Capper
• [RFC PATCH V2 2/4] arm: mm: implement get_user_pages_fast   Steve Capper
• [RFC PATCH V2 3/4] arm64: mm: Enable HAVE_RCU_TABLE_FREE logic   Steve Capper
• [RFC PATCH V2 4/4] arm64: mm: implement get_user_pages_fast   Steve Capper
• [RFC/PATCH v2] ARM: vDSO gettimeofday using generic timer architecture   Steve Capper
• [RFC/PATCH v2] ARM: vDSO gettimeofday using generic timer architecture   Steve Capper
• [RFC PATCH V2 3/4] arm64: mm: Enable HAVE_RCU_TABLE_FREE logic   Steve Capper
• [RFC PATCH V2 4/4] arm64: mm: implement get_user_pages_fast   Steve Capper
• [PATCH 0/3] arm64: Use pte manipulation functions for THP   Steve Capper
• [PATCH 2/3] arm64: mm: Route pmd thp functions through pte equivalents   Steve Capper
• [PATCH 0/3] arm64: Use pte manipulation functions for THP   Steve Capper
• [RFC PATCH 0/2] ARM: Switch back to L_PTE_WRITE   Steve Capper
• [RFC PATCH 1/2] arm: mm: Switch back to L_PTE_WRITE   Steve Capper
• [RFC PATCH 2/2] arm: mm: Double logical invert for LPAE pte_write(), pte_dirty()   Steve Capper
• [PATCH v3] ARM: mm: report both sections from PMD   Steve Capper
• [PATCH 0/5] Huge pages for short descriptors on ARM   Steve Capper
• [PATCH 1/5] mm: hugetlb: Introduce huge_pte_{page,present,young}   Steve Capper
• [PATCH 2/5] arm: mm: Adjust the parameters for __sync_icache_dcache   Steve Capper
• [PATCH 3/5] arm: mm: Make mmu_gather aware of huge pages   Steve Capper
• [PATCH 4/5] arm: mm: HugeTLB support for non-LPAE systems   Steve Capper
• [PATCH 5/5] arm: mm: Add Transparent HugePage support for non-LPAE   Steve Capper
• [PATCH V2] arm: mm: Remove hugetlb warning from Coherent DMA allocator   Steve Capper
• [PATCH V2] arm: mm: Remove hugetlb warning from Coherent DMA allocator   Steve Capper
• [RFC PATCH 1/2] arm: mm: Switch back to L_PTE_WRITE   Steve Capper
• [RFC PATCH 2/2] arm: mm: Double logical invert for LPAE pte_write(), pte_dirty()   Steve Capper
• [RFC PATCH 2/2] arm: mm: Double logical invert for LPAE pte_write(), pte_dirty()   Steve Capper
• [RFC PATCH 0/2] Introduce pte_isset for arm and arm64   Steve Capper
• [RFC PATCH 1/2] arm: mm: Introduce pte_isset(pte,flag)   Steve Capper
• [RFC PATCH 2/2] arm64: Introduce pte_isset(pte,flag)   Steve Capper
• [RFC PATCH 0/2] Introduce pte_isset for arm and arm64   Steve Capper
• [PATCH V2] arm64: mm: Route pmd thp functions through pte equivalents   Steve Capper
• [PATCH V2 0/3] PTE fixes for arm and arm64   Steve Capper
• [PATCH V2 1/3] arm: mm: Double logical invert for pte accessors   Steve Capper
• [PATCH V2 2/3] arm64: mm: Add double logical invert to pte accessors   Steve Capper
• [PATCH V2 3/3] arm: mm: Switch back to L_PTE_WRITE   Steve Capper
• [PATCH V2 0/3] PTE fixes for arm and arm64   Steve Capper
• [PATCHv7][ 2/7] staging: imx-drm: Add RGB666 support for parallel display.   Denis Carikli
• [PATCHv7][ 3/7] staging: imx-drm: Correct BGR666 and the board's dts that use them.   Denis Carikli
• [PATCHv7][ 4/7] staging: imx-drm: Use de-active and pixelclk-active display-timings.   Denis Carikli
• [PATCHv7][ 5/7] staging: imx-drm: parallel display: add regulator support.   Denis Carikli
• [PATCHv7][ 6/7] ARM: dts: mbimx51sd: Add display support.   Denis Carikli
• [PATCHv7][ 7/7] ARM: dts: mbimx51sd: Add CMO-QVGA backlight support.   Denis Carikli
• [PATCHv6][ 1/5] video: mx3fb: Use devm_kzalloc   Denis Carikli
• [PATCHv6][ 2/5] video: mx3fb: Add device tree suport.   Denis Carikli
• [PATCHv6][ 3/5] video: mx3fb: Introduce regulator support.   Denis Carikli
• [PATCHv6][ 4/5] ARM: dts: i.MX35: Add display support.   Denis Carikli
• [PATCHv6][ 5/5] ARM: dts: mbimxsd35 Add video and displays support.   Denis Carikli
• [PATCHv6][ 3/5] video: mx3fb: Introduce regulator support.   Denis Carikli
• [PATCHv8][ 2/7] staging: imx-drm: Add RGB666 support for parallel display.   Denis Carikli
• [PATCHv8][ 3/7] staging: imx-drm: Correct BGR666 and the board's dts that use them.   Denis Carikli
• [PATCHv8][ 4/7] staging: imx-drm: Use de-active and pixelclk-active display-timings.   Denis Carikli
• [PATCHv8][ 5/7] staging: imx-drm: parallel display: add regulator support.   Denis Carikli
• [PATCHv8][ 6/7] ARM: dts: mbimx51sd: Add display support.   Denis Carikli
• [PATCHv8][ 7/7] ARM: dts: mbimx51sd: Add CMO-QVGA backlight support.   Denis Carikli
• [PATCH v6 0/8] ARM: brcmstb: Add Broadcom STB SoC support   Marc Carino
• [PATCH v6 1/8] ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs   Marc Carino
• [PATCH v6 2/8] power: reset: Add reboot driver for brcmstb   Marc Carino
• [PATCH v6 3/8] ARM: brcmstb: add debug UART for earlyprintk support   Marc Carino
• [PATCH v6 4/8] ARM: do CPU-specific init for Broadcom Brahma15 cores   Marc Carino
• [PATCH v6 5/8] ARM: brcmstb: add CPU binding for Broadcom Brahma15   Marc Carino
• [PATCH v6 6/8] ARM: brcmstb: add misc. DT bindings for brcmstb   Marc Carino
• [PATCH v6 7/8] ARM: brcmstb: gic: add compatible string for Broadcom Brahma15   Marc Carino
• [PATCH v6 8/8] ARM: brcmstb: dts: add a reference DTS for Broadcom 7445   Marc Carino
• [PATCH v7 0/9] ARM: brcmstb: Add Broadcom STB SoC support   Marc Carino
• [PATCH v7 1/9] ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs   Marc Carino
• [PATCH v7 2/9] power: reset: Add reboot driver for brcmstb   Marc Carino
• [PATCH v7 3/9] ARM: brcmstb: add debug UART for earlyprintk support   Marc Carino
• [PATCH v7 4/9] ARM: do CPU-specific init for Broadcom Brahma15 cores   Marc Carino
• [PATCH v7 5/9] ARM: Enable erratum 798181 for Broadcom Brahma-B15   Marc Carino
• [PATCH v7 6/9] ARM: brcmstb: add CPU binding for Broadcom Brahma15   Marc Carino
• [PATCH v7 7/9] ARM: brcmstb: add misc. DT bindings for brcmstb   Marc Carino
• [PATCH v7 8/9] ARM: brcmstb: gic: add compatible string for Broadcom Brahma15   Marc Carino
• [PATCH v7 9/9] ARM: brcmstb: dts: add a reference DTS for Broadcom 7445   Marc Carino
• [RFC PATCH 2/3] staging: imx-drm-core: Use graph to find connection between crtc and encoder   Dan Carpenter
• [patch] mtd: nuc900_nand: NULL dereference in nuc900_nand_enable()   Dan Carpenter
• [PATCHv6] staging/iio/adc: change the MXS touchscreen driver implementation   Dan Carpenter
• [PATCHv6] staging/iio/adc: change the MXS touchscreen driver implementation   Dan Carpenter
• [PATCH v5 0/6] Add support for the System Power Management Interface (SPMI)   Josh Cartwright
• [PATCH v5 1/6] spmi: Linux driver framework for SPMI   Josh Cartwright
• [PATCH v5 2/6] spmi: add generic SPMI controller binding documentation   Josh Cartwright
• [PATCH v5 3/6] spmi: Add MSM PMIC Arbiter SPMI controller   Josh Cartwright
• [PATCH v5 4/6] spmi: pmic_arb: add support for interrupt handling   Josh Cartwright
• [PATCH v5 5/6] spmi: document the PMIC arbiter SPMI bindings   Josh Cartwright
• [PATCH v5 6/6] regmap: spmi: support base and extended register spaces   Josh Cartwright
• [PATCH v5 4/6] spmi: pmic_arb: add support for interrupt handling   Josh Cartwright
• [PATCH v2 5/5] of: document bindings for reserved-memory nodes   Josh Cartwright
• Weird sched_clock behaviour during boot with -rc1   Josh Cartwright
• [PATCH v5 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Josh Cartwright
• [PATCH 0/8] of_find_matching_node/of_match_node -> of_find_matching_node_and_match   Josh Cartwright
• [PATCH 1/8] bus: arm-cci: make use of of_find_matching_node_and_match   Josh Cartwright
• [PATCH 2/8] bus: mvebu-mbus: make use of of_find_matching_node_and_match   Josh Cartwright
• [PATCH 3/8] ARM: at91: make use of of_find_matching_node_and_match   Josh Cartwright
• [PATCH 4/8] ARM: mvebu: make use of of_find_matching_node_and_match   Josh Cartwright
• [PATCH 5/8] ARM: prima2: make use of of_find_matching_node_and_match   Josh Cartwright
• [PATCH 6/8] ARM: l2x0: make use of of_find_matching_node_and_match   Josh Cartwright
• [PATCH 4/8] ARM: mvebu: make use of of_find_matching_node_and_match   Josh Cartwright
• [Patch v5 1/2] dmaengine: add Qualcomm BAM dma driver   Josh Cartwright
• [Patch v5 1/2] dmaengine: add Qualcomm BAM dma driver   Josh Cartwright
• [PATCH 3/8] ARM: at91: make use of of_find_matching_node_and_match   Josh Cartwright
• [PATCH v2 1/5] drivers: of: add initialization code for reserved memory   Josh Cartwright
• [PATCH v6 0/6] Add support for the System Power Management Interface (SPMI)   Josh Cartwright
• [PATCH v6 1/6] spmi: Linux driver framework for SPMI   Josh Cartwright
• [PATCH v6 2/6] spmi: add generic SPMI controller binding documentation   Josh Cartwright
• [PATCH v6 3/6] spmi: Add MSM PMIC Arbiter SPMI controller   Josh Cartwright
• [PATCH v6 4/6] spmi: pmic_arb: add support for interrupt handling   Josh Cartwright
• [PATCH v6 5/6] spmi: document the PMIC arbiter SPMI bindings   Josh Cartwright
• [PATCH v6 6/6] regmap: spmi: support base and extended register spaces   Josh Cartwright
• [PATCH v2 1/5] drivers: of: add initialization code for reserved memory   Josh Cartwright
• [PATCH 23/27] clocksource: sh_cmt: Add DT support   Josh Cartwright
• [PATCH v4 1/4] Power: Reset: Generalize qnap-poweroff to with on Synology devices.   Josh Cartwright
• [PATCH v4 2/4] DT: Vendor prefixes: Add ricoh, ssi and synology   Josh Cartwright
• [PATCH v2] usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEP   Josh Cartwright
• [PATCH v5 1/6] spmi: Linux driver framework for SPMI   Josh Cartwright
• [PATCH] rtc: mv: reset date if after year 2038   Josh Cartwright
• [PATCH] rtc: mv: reset date if after year 2038   Josh Cartwright
• [PATCH 1/8] PM / Runtime: Fetch runtime PM callbacks using a macro   Josh Cartwright
• [PATCH 3/8] spi: pl022: Let runtime PM callbacks be available for CONFIG_PM   Josh Cartwright
• [PATCH v3 2/2] i2c: New bus driver for the Qualcomm QUP I2C controller   Josh Cartwright
• [PATCH v3 1/9] Input: pmic8xxx-pwrkey - Migrate to regmap APIs   Josh Cartwright
• [PATCH v3 2/9] Input: pmic8xxx-keypad - Migrate to devm_* APIs   Josh Cartwright
• [PATCH v3 1/9] Input: pmic8xxx-pwrkey - Migrate to regmap APIs   Josh Cartwright
• [PATCH v3 1/9] Input: pmic8xxx-pwrkey - Migrate to regmap APIs   Josh Cartwright
• [PATCH v3 1/9] Input: pmic8xxx-pwrkey - Migrate to regmap APIs   Josh Cartwright
• [PATCH 1/3] ARM: config: Add qcom_defconfig   Josh Cartwright
• [PATCH v4 4/9] Input: pmic8xxx-keypad - Migrate to DT   Josh Cartwright
• [PATCH v4 5/9] Input: pmic8xxx-pwrkey - Migrate to DT   Josh Cartwright
• [PATCH v4 7/9] devicetree: bindings: Document PM8921/8058 keypads   Josh Cartwright
• [PATCH v4 7/9] devicetree: bindings: Document PM8921/8058 keypads   Josh Cartwright
• [PATCHv2 2/2] arm: Get rid of meminfo   Courtney Cavin
• [PATCHv2 2/2] arm: Get rid of meminfo   Courtney Cavin
• [PATCH 1/2] i2c-s3c2410: Leave the bus disabled unless it is in use   Naveen Krishna Ch
• [PATCH 1/2] ALSA: hda/ca0132 - setup/cleanup streams   Hsin-Yu Chao
• [PATCH 2/2] ALSA: hda/ca0132 - Fix recording from mode id 0x8   Hsin-Yu Chao
• [PATCH 1/2] ALSA: hda/ca0132 - setup/cleanup streams   Hsin-Yu Chao
• [PATCH 2/2] ALSA: hda/ca0132 - Fix recording from mode id 0x8   Hsin-Yu Chao
• [PATCH 1/2 v3] i2c: exynos5: add support for HSI2C on Exynos5260 SoC   Naveen Krishna Chatradhi
• [PATCH] ARM: DTS: exynos5420: Rename hsi2c compatible to exynos5250-hsi2c   Naveen Krishna Chatradhi
• [PATCH 1/2 v4] i2c: exynos5: add support for HSI2C on Exynos5260 SoC   Naveen Krishna Chatradhi
• [PATCH 2/2 v4] i2c: exynos5: configure fifo_depth based on HSI2C module variant   Naveen Krishna Chatradhi
• [PATCH] ASoC: fsl: fix pm support of machine drivers   Nicolin Chen
• [PATCH v9 00/12] Add power management support for mxs phy   Peter Chen
• [PATCH v9 01/12] usb: doc: phy-mxs: Add more compatible strings   Peter Chen
• [PATCH v9 11/12] usb: phy-mxs: Add system suspend/resume API   Peter Chen
• [PATCH 1/1] imx-drm: imx-drm-core: fix the build warning   Peter Chen
• [PATCH v10 00/15] Add power management support for mxs phy   Peter Chen
• [PATCH v10 01/15] usb: doc: phy-mxs: Add more compatible strings   Peter Chen
• [PATCH v10 02/15] usb: phy-mxs: Add platform judgement code   Peter Chen
• [PATCH v10 03/15] usb: phy-mxs: Add auto clock and power setting   Peter Chen
• [PATCH v10 04/15] usb: doc: phy-mxs: update binding for adding anatop phandle   Peter Chen
• [PATCH v10 05/15] usb: phy-mxs: Add anatop regmap   Peter Chen
• [PATCH v10 06/15] usb: phy-mxs: change description of usb device speed   Peter Chen
• [PATCH v10 07/15] usb: phy-mxs: Enable IC fixes for related SoCs   Peter Chen
• [PATCH v10 08/15] usb: phy-mxs: add controller id   Peter Chen
• [PATCH v10 09/15] usb: phy: Add set_wakeup API   Peter Chen
• [PATCH v10 10/15] usb: phy-mxs: Add implementation of set_wakeup   Peter Chen
• [PATCH v10 11/15] usb: phy-mxs: Add system suspend/resume API   Peter Chen
• [PATCH v10 12/15] usb: phy-mxs: Add sync time after controller clear phcd   Peter Chen
• [PATCH v10 13/15] ARM: dts: mxs: add mxs phy controller id   Peter Chen
• [PATCH v10 14/15] ARM: dts: imx6: add anatop phandle for usbphy   Peter Chen
• [PATCH v10 15/15] ARM: dts: imx6: add mxs phy controller id   Peter Chen
• [PATCH v10 04/15] usb: doc: phy-mxs: update binding for adding anatop phandle   Peter Chen
• [PATCH v10 10/15] usb: phy-mxs: Add implementation of set_wakeup   Peter Chen
• [PATCH v10 01/15] usb: doc: phy-mxs: Add more compatible strings   Peter Chen
• [PATCH v10 01/15] usb: doc: phy-mxs: Add more compatible strings   Peter Chen
• [PATCH v11 00/15] Add power management support for mxs phy   Peter Chen
• [PATCH v11 01/15] usb: doc: phy-mxs: Add more compatible strings   Peter Chen
• [PATCH v11 02/15] usb: phy-mxs: Add platform judgement code   Peter Chen
• [PATCH v11 03/15] usb: phy-mxs: Add auto clock and power setting   Peter Chen
• [PATCH v11 04/15] usb: doc: phy-mxs: update binding for adding anatop phandle   Peter Chen
• [PATCH v11 05/15] usb: phy-mxs: Add anatop regmap   Peter Chen
• [PATCH v11 06/15] usb: phy-mxs: change description of usb device speed   Peter Chen
• [PATCH v11 07/15] usb: phy-mxs: Enable IC fixes for related SoCs   Peter Chen
• [PATCH v11 08/15] usb: phy-mxs: add controller id   Peter Chen
• [PATCH v11 09/15] usb: phy: Add set_wakeup API   Peter Chen
• [PATCH v11 10/15] usb: phy-mxs: Add implementation of set_wakeup   Peter Chen
• [PATCH v11 11/15] usb: phy-mxs: Add system suspend/resume API   Peter Chen
• [PATCH v11 12/15] usb: phy-mxs: Add sync time after controller clear phcd   Peter Chen
• [PATCH v11 13/15] ARM: dts: mxs: add mxs phy controller id   Peter Chen
• [PATCH v11 14/15] ARM: dts: imx6: add anatop phandle for usbphy   Peter Chen
• [PATCH v11 15/15] ARM: dts: imx6: add mxs phy controller id   Peter Chen
• [PATCH v11 09/15] usb: phy: Add set_wakeup API   Peter Chen
• [PATCH v11 00/15] Add power management support for mxs phy   Peter Chen
• [PATCH] ARM: i.MX6: clk: Remove usbphy clock hacks   Peter Chen
• [PATCH] ARM: i.MX6: clk: Remove usbphy clock hacks   Peter Chen
• [Linaro-mm-sig] CMA on AArch64   Hwang Chih-Chyuan
• [PATCH 06/18] extcon: max14577: Change extcon name instead of static name according to device type   Chanwoo Choi
• [PATCH 11/18] extcon: max14577: Add max14577 prefix to muic_irqs   Chanwoo Choi
• [PATCH 07/18] mfd: max14577: Rename and add MAX14577 symbols to prepare for max77836   Chanwoo Choi
• [PATCH 08/18] mfd: max14577: Rename state container to maxim_core   Chanwoo Choi
• [PATCH 09/18] mfd: max14577: Add "muic" suffix to regmap and irq_chip   Chanwoo Choi
• [PATCH 11/18] extcon: max14577: Add max14577 prefix to muic_irqs   Chanwoo Choi
• [PATCH 3/4] ARM: dts: Add support of STid127 Soc.   Patrice Chotard
• [PATCH 1/4] ARM: STi: add stid127 soc support   Patrice Chotard
• [PATCH RESEND v4 00/37] mtd: st_spi_fsm: Add new driver   Angus Clark
• [PATCH] drm/msm: drop ARCH_MSM Kconfig depend   Rob Clark
• [RFC PATCH v4 3/8] staging: imx-drm: Document updated imx-drm device tree bindings   Rob Clark
• [PATCH v2] dma: Add Xilinx AXI Video Direct Memory Access Engine driver support   Lars-Peter Clausen
• [Patch v4 1/2] dmaengine: add Qualcomm BAM dma driver   Lars-Peter Clausen
• [alsa-devel] [PATCH v3 2/5] ASoC: tda998x: add a codec driver for the TDA998x   Lars-Peter Clausen
• [alsa-devel] [PATCH v3 4/5] ASoC: tda998x: adjust the audio hw parameters from EDID   Lars-Peter Clausen
• [alsa-devel] [PATCH v3 4/5] ASoC: tda998x: adjust the audio hw parameters from EDID   Lars-Peter Clausen
• [PATCH v2] dma: Add Xilinx AXI Video Direct Memory Access Engine driver support   Lars-Peter Clausen
• [alsa-devel] [PATCH v3 4/5] ASoC: tda998x: adjust the audio hw parameters from EDID   Lars-Peter Clausen
• [PATCH v2] dma: Add Xilinx AXI Video Direct Memory Access Engine driver support   Lars-Peter Clausen
• [PATCH resend] clk: axi-clkgen: Add support for v2   Lars-Peter Clausen
• [PATCH v3 1/3] dma: Support multiple interleaved frames with non-contiguous memory   Lars-Peter Clausen
• [PATCH v3 1/3] dma: Support multiple interleaved frames with non-contiguous memory   Lars-Peter Clausen
• [PATCH 3/3] iio: adc: fsl,imx25-gcq driver   Lars-Peter Clausen
• [PATCH resend] clk: axi-clkgen: Add support for v2   Lars-Peter Clausen
• nand pmecc crash detected   Herve Codina
• [PATCH v4 0/8] wilink: add device tree support   Luca Coelho
• [PATCH v4 0/8] wilink: add device tree support   Luca Coelho
• [PATCH] ARM: mm: fix reporting of read-only PMD bits   Kees Cook
• [PATCH] ARM: mm: report both sections from PMD   Kees Cook
• [PATCH] ARM: mm: report both sections from PMD   Kees Cook
• [PATCH] ARM: mm: report both sections from PMD   Kees Cook
• [RFC/PATCH 0/3] Add devicetree scanning for randomness   Kees Cook
• [PATCH v2] ARM: mm: fix reporting of read-only PMD bits   Kees Cook
• [PATCH v2] ARM: mm: report both sections from PMD   Kees Cook
• [PATCH v2] ARM: mm: report both sections from PMD   Kees Cook
• [PATCH v3] ARM: mm: report both sections from PMD   Kees Cook
• [PATCH 0/2] ARM: mm: allow for stricter kernel memory perms   Kees Cook
• [PATCH 1/2] ARM: mm: allow for stricter kernel memory perms   Kees Cook
• [PATCH 2/2] ARM: mm: keep rodata non-executable   Kees Cook
• [PATCH 2/2] ARM: mm: keep rodata non-executable   Kees Cook
• [PATCH v3] ARM: mm: report both sections from PMD   Kees Cook
• [PATCH v3] ARM: mm: report both sections from PMD   Kees Cook
• [PATCH 2/2] ARM: mm: keep rodata non-executable   Kees Cook
• [PATCH 2/2] ARM: mm: keep rodata non-executable   Kees Cook
• [PATCH] dma: mv_xor: Silence a bunch of LPAE-related warnings   Jason Cooper
• [GIT PULL] irqchip: dove: drivers for v3.14   Jason Cooper
• [GIT PULL] irqchip: dove: drivers for v3.14   Jason Cooper
• [PATCHv2 2/2] arm: Get rid of meminfo   Jason Cooper
• [PATCH] mvebu : pcie: dt: potential issue in range parsing   Jason Cooper
• [PATCH 0/3] irqchip: orion: bridge irq fixes for v3.14-rc1   Jason Cooper
• [PATCH] clk: respect the clock dependencies in of_clk_init   Jason Cooper
• [PATCH] ARCH: mvebu: Makefile clean-up   Jason Cooper
• [RFC/PATCH] ARM: dove: Remove UBI support from defconfig   Jason Cooper
• [PATCH] mvebu : pcie: dt: potential issue in range parsing   Jason Cooper
• [PATCH 0/4] clk: mvebu: fix clk init order   Jason Cooper
• [PATCH 0/4] clk: mvebu: fix clk init order   Jason Cooper
• [PATCH] PCI: MVEBU: Use Device ID and revision from underlying endpoint   Jason Cooper
• [PATCH v5 00/20] Armada 370/XP watchdog support   Jason Cooper
• [PATCH v5 02/20] clocksource: orion: Use atomic access for shared registers   Jason Cooper
• [PATCH 1/4] Power: Reset: Generalize qnap-poweroff to with on Synology devices.   Jason Cooper
• [PATCH 2/4] DT: Vendor prefixes: Add ricoh, ssi and synology   Jason Cooper
• [PATCH 3/4] DT: i2c: Trivial: Add sii,s35390a   Jason Cooper
• [PATCH 4/4] ARM: Kirkwood: Add support for many Synology NAS devices   Jason Cooper
• [PATCH 4/4] ARM: Kirkwood: Add support for many Synology NAS devices   Jason Cooper
• [PATCH v6 18/19] ARM: mvebu: Enable watchdog support in defconfig   Jason Cooper
• [PATCH 0/3] irqchip: orion: bridge irq fixes for v3.14-rc1   Jason Cooper
• [PATCH 0/4] clk: mvebu: fix clk init order   Jason Cooper
• [PATCH v6 18/19] ARM: mvebu: Enable watchdog support in defconfig   Jason Cooper
• [PATCH 00/21] Move DT kirkwood into mach-mvebu   Jason Cooper
• [PATCH 10/21] ARM: MM: Add DT binding for Feroceon L2 cache   Jason Cooper
• [PATCH 15/21] ARM: MVEBU: Let kirkwood use the system controller for restart   Jason Cooper
• [PATCH 16/21] drivers: Enable building of Kirkwood drivers for mach-mvebu   Jason Cooper
• [PATCH 20/21] ARM: MVEBU: Remove unneeded headers   Jason Cooper
• [PATCH 02/21] IRQ: Orion: Fix getting generic chip pointer.   Jason Cooper
• [PATCH] clk: respect the clock dependencies in of_clk_init   Jason Cooper
• [PATCH 10/21] ARM: MM: Add DT binding for Feroceon L2 cache   Jason Cooper
• [PATCH 16/21] drivers: Enable building of Kirkwood drivers for mach-mvebu   Jason Cooper
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Jason Cooper
• [PATCH] i2c: mv64xxx: Fix locked bus when offload is selected but not used on a message   Jason Cooper
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Jason Cooper
• [PATCH v6 05/19] watchdog: orion: Make sure the watchdog is initially stopped   Jason Cooper
• [GIT PULL] irqchip: dove: drivers for v3.14   Jason Cooper
• [PATCH] i2c: mv64xxx: Fix locked bus when offload is selected but not used on a message   Jason Cooper
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Jason Cooper
• [PATCH 02/21] IRQ: Orion: Fix getting generic chip pointer.   Jason Cooper
• [PATCH] i2c: mv64xxx: Fix locked bus when offload is selected but not used on a message   Jason Cooper
• [PATCH] gpio: mvebu: use chained_irq_{enter, exit} for GIC compatibility   Jason Cooper
• [GIT PULL] mvebu: phy and ata fixes for v3.14   Jason Cooper
• [GIT PULL] clk: mvebu: fixes for v3.14   Jason Cooper
• [PATCH 04/11] ARM: mvebu: add Device Tree description of the Armada 375 SoC   Jason Cooper
• [PATCH 06/11] ARM: mvebu: add Armada 380/385 support to the system-controller driver   Jason Cooper
• [PATCH 06/11] ARM: mvebu: add Armada 380/385 support to the system-controller driver   Jason Cooper
• [PATCH 0/2] Marvell Armada 375 and 38x timer support   Jason Cooper
• [PATCH 06/11] ARM: mvebu: add Armada 380/385 support to the system-controller driver   Jason Cooper
• [PATCH 2/8] bus: mvebu-mbus: make use of of_find_matching_node_and_match   Jason Cooper
• [PATCH 4/8] ARM: mvebu: make use of of_find_matching_node_and_match   Jason Cooper
• [PATCH 4/8] ARM: mvebu: make use of of_find_matching_node_and_match   Jason Cooper
• [PATCH 0/2] Marvell Armada 375 and 38x pinctrl drivers   Jason Cooper
• [PATCH 6/6] dt: Update binding information for mvebu gating clocks with Armada 380/385   Jason Cooper
• [PATCH] ARM: mvebu: rename mvebu_defconfig to mvebu_v7_defconfig   Jason Cooper
• [PATCH 2/8] bus: mvebu-mbus: make use of of_find_matching_node_and_match   Jason Cooper
• [PATCH 4/8] ARM: mvebu: make use of of_find_matching_node_and_match   Jason Cooper
• [PATCH 1/3] ARM: mvebu: remove unneeded ->map_io field for Armada 370/XP   Jason Cooper
• [PATCH 2/3] ARM: mvebu: use GPIO DT defines in Armada 370/XP boards   Jason Cooper
• [PATCH 2/3] ARM: mvebu: use GPIO DT defines in Armada 370/XP boards   Jason Cooper
• [RFC/PATCH 0/3] Add devicetree scanning for randomness   Jason Cooper
• [RFC/PATCH 0/3] Add devicetree scanning for randomness   Jason Cooper
• [RFC/PATCH 0/3] Add devicetree scanning for randomness   Jason Cooper
• [RFC/PATCH 0/3] Add devicetree scanning for randomness   Jason Cooper
• [RFC/PATCH 0/3] Add devicetree scanning for randomness   Jason Cooper
• [PATCH v3 01/13] ARM: mvebu: rename armada-370-xp.c to armada-mvebu.c   Jason Cooper
• [PATCH v3 4/4] ARM: Kirkwood: Add support for many Synology NAS devices   Jason Cooper
• [PATCH 1/2] bus: mvebu-mbus: Fix incorrect size for PCI aperture resources   Jason Cooper
• [PATCH 0/6] Marvell Armada 375 and 38x clocks drivers   Jason Cooper
• [PATCH 0/4] Core Divider support for Armada 375 SoC   Jason Cooper
• [PATCH v2 0/7] Audio support for Armada 370 DB   Jason Cooper
• [PATCH v3 01/13] ARM: mvebu: rename armada-370-xp.c to armada-mvebu.c   Jason Cooper
• [PATCH v4 07/13] ARM: dts: mvebu: Add a new set of registers to the PMSU node   Jason Cooper
• [PATCH 0/2] Kirkwood RD88F6192 and RD88F6281 DT conversion   Jason Cooper
• [v3.14-rc3 BUG] 1) panic and 2) SATA not working (Was Re: [PATCH] ATA: SATA_MV: Add missing Kconfig select statememnt)   Jason Cooper
• [RFC/PATCH 0/3] Add devicetree scanning for randomness   Jason Cooper
• [RESEND PATCH] ARM: dove: dt: revert PMU interrupt controller node   Jason Cooper
• [GIT PULL] irqchip: dove: drivers for v3.14   Jason Cooper
• [PATCH V2] ARM: dove: dt: revert PMU interrupt controller node   Jason Cooper
• irqchip: irq-dove: problem with the PMU interrupt controller.   Jason Cooper
• [PATCH 0/2] irqchip: Armada 370/XP MPIC as a slave controller   Jason Cooper
• [GIT PULL] mvebu: irqchip driver for v3.15   Jason Cooper
• [PATCH v7 11/18] watchdog: orion: Add per-compatible watchdog start implementation   Jason Cooper
• [PATCH v7 11/18] watchdog: orion: Add per-compatible watchdog start implementation   Jason Cooper
• [PATCH v7 00/18] Armada 370/XP watchdog   Jason Cooper
• [PATCH v4 00/13] Core support for Marvell Armada 375 and 38x   Jason Cooper
• [PATCH v2 10/23] ARM: MM: Add DT binding for Feroceon L2 cache   Jason Cooper
• [PATCH v2 18/23] drivers: Enable building of Kirkwood drivers for mach-mvebu   Jason Cooper
• [PATCH v2 20/23] ARM: config: Add a multi_v5_defconfig   Jason Cooper
• [PATCH v2 12/23] ARM: Fix default CPU selection for ARCH_MULTI_V5   Jason Cooper
• [PATCH] net: ethernet: remove unneeded dependency of mvneta and update help text   Jason Cooper
• [PATCH] net: ethernet: remove unneeded dependency of mvneta and update help text   Jason Cooper
• [PATCH v2] net: ethernet: update dependency and help text of mvneta   Jason Cooper
• [PATCH] rtc: mv: reset date if after year 2038   Jason Cooper
• [PATCH] rtc: mv: reset date if after year 2038   Jason Cooper
• irqchip: irq-dove: problem with the PMU interrupt controller.   Jason Cooper
• [GIT PULL] ARM: mvebu: DT fixes for v3.14   Jason Cooper
• [GIT PULL] irqchip: mvebu fixes for v3.14   Jason Cooper
• [GIT PULL] ARM: mvebu: DT changes for v3.15   Jason Cooper
• [GIT PULL] ARM: mvebu soc changes for v3.15   Jason Cooper
• [GIT PULL] ARM: mvebu: defconfig changes for v3.15   Jason Cooper
• [RFC/PATCH 0/3] Add devicetree scanning for randomness   Jason Cooper
• [PATCH v2 00/23] Move DT kirkwood into mach-mvebu   Jason Cooper
• [GIT PULL] clk: mvebu: fixes for v3.14   Jason Cooper
• [GIT PULL] irqchip: dove: drivers for v3.14   Jason Cooper
• [GIT PULL] irqchip: mvebu fixes for v3.14   Jason Cooper
• [GIT PULL] ARM: mvebu: DT fixes for v3.14   Jason Cooper
• [GIT PULL] ARM: mvebu: DT fixes for v3.14   Jason Cooper
• [Patch v3 10/23] ARM: MM: Add DT binding for Feroceon L2 cache   Jason Cooper
• [Patch v3 21/23] ARM: MVEBU: Simplifiy headers and make local   Jason Cooper
• [PATCH v6 3/4] DT: i2c: Trivial: Add sii, s35390a, fix ricoh vendor prefix   Jason Cooper
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Jason Cooper
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Jason Cooper
• [PATCH v4 00/13] Core support for Marvell Armada 375 and 38x   Jason Cooper
• Stuck getting DTS working for a new kirkwood board   Jason Cooper
• [GIT PULL] mvebu: irqchip driver for v3.15   Jason Cooper
• Stuck getting DTS working for a new kirkwood board   Jason Cooper
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Jason Cooper
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Jason Cooper
• Stuck getting DTS working for a new kirkwood board   Jason Cooper
• [GIT PULL V2] irqchip: mvebu fixes for v3.14   Jason Cooper
• [PATCH] rtc: mv: reset date if after year 2038   Jason Cooper
• [GIT PULL] ARM: mvebu soc changes for v3.15   Jason Cooper
• [GIT PULL] ARM: mvebu: defconfig changes for v3.15   Jason Cooper
• [PATCH v7 2/4] Power: Reset: Generalize qnap-poweroff to work on Synology devices.   Jason Cooper
• [PATCH v7 0/4] DT support for kirkwood based Synology NAS boxes   Jason Cooper
• [PATCH v2 00/23] Move DT kirkwood into mach-mvebu   Jason Cooper
• [PATCH 0/3] ARM: mvebu: Use preprocessor macros for Armada 375/38x DTs   Jason Cooper
• [RFC/PATCH v2] ARM: mvebu: Rename the ARCH_MVEBU menu option   Jason Cooper
• [GIT PULL] clk: mvebu driver changes for v3.15   Jason Cooper
• [GIT PULL] ARM: mvebu: dt changes for v3.15 (round 2)   Jason Cooper
• [GIT PULL] irqchip: armada-370-xp changes for v3.15   Jason Cooper
• [GIT PULL] ARM: mvebu: new SoC support for v3.15   Jason Cooper
• [GIT PULL] ARM: mvebu: watchdog driver changes for v3.15   Jason Cooper
• [PATCH] Revert "ARM: dove: dt: revert PMU interrupt controller node"   Jason Cooper
• Stuck getting DTS working for a new kirkwood board   Jason Cooper
• [PATCH v4 02/22] irqchip: Orion: Fix getting generic chip pointer.   Jason Cooper
• [PATCH v4 03/22] ARM: Kirkwood: Convert mv88f6281gtw_ge switch setup to DT   Jason Cooper
• [PATCH v4 12/22] ARM: Fix default CPU selection for ARCH_MULTI_V5   Jason Cooper
• [PATCH v4 13/22] ARM: Fix MULTI_TLB for feroceon   Jason Cooper
• [PATCH v4 10/22] ARM: MM: Add DT binding for Feroceon L2 cache   Jason Cooper
• [PATCH v4 03/22] ARM: Kirkwood: Convert mv88f6281gtw_ge switch setup to DT   Jason Cooper
• [PATCH v4 00/22] Move DT kirkwood into mach-mvebu   Jason Cooper
• [PATCH v4 00/16] pinctrl: mvebu: restructure resource allocation   Jason Cooper
• [PATCH] ARM: mvebu: Armada 375/38x depend on MULTI_V7   Jason Cooper
• [PATCH 3/4] ARM: mvebu: Add HP T5325 thin client   Jason Cooper
• [PATCH 4/4] ARM: mvebu: Add HP T5325 devices to {multi|mvebu}_v5_defconfig   Jason Cooper
• [PATCH 0/2] Marvell Armada 375 and 38x pinctrl drivers   Jason Cooper
• [PATCH 0/2] Marvell Armada 375 and 38x pinctrl drivers   Jason Cooper
• [PATCH v4 00/16] pinctrl: mvebu: restructure resource allocation   Jason Cooper
• [PATCH v4 00/16] pinctrl: mvebu: restructure resource allocation   Jason Cooper
• [PATCH 0/2] Marvell Armada 375 and 38x pinctrl drivers   Jason Cooper
• [PATCH v4 00/16] pinctrl: mvebu: restructure resource allocation   Jason Cooper
• linux-next: manual merge of the sound-asoc tree with the mvebu tree   Jason Cooper
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Jason Cooper
• [PATCH v4 18/22] drivers: Enable building of Kirkwood drivers for mach-mvebu   Jason Cooper
• [PATCH] ARM: mvebu: Armada 375/38x depend on MULTI_V7   Jason Cooper
• [PATCH 00/10] pinctrl: mvebu: remove hard-coded addresses from Dove pinctrl   Jason Cooper
• [PATCH] ARM: Kirkwood: Remove redundant kexec code   Jason Cooper
• [PATCH v2 1/5] ARM: Kirkwood: Add audio node to kirkwood.dtsi   Jason Cooper
• [PATCH v2 2/5] ARM: mvebu: Add i2c alias so setting bus number   Jason Cooper
• [PATCH v2 3/5] ARM: mvebu: Add HP T5325 thin client   Jason Cooper
• [PATCH v2 4/5] ARM: mvebu: Add dts file describing HP T5325 thin client   Jason Cooper
• [PATCH v2 2/5] ARM: mvebu: Add i2c alias so setting bus number   Jason Cooper
• [PATCH v2 2/5] ARM: mvebu: Add i2c alias so setting bus number   Jason Cooper
• [PATCH 00/10] pinctrl: mvebu: remove hard-coded addresses from Dove pinctrl   Jason Cooper
• [PATCH 00/10] pinctrl: mvebu: remove hard-coded addresses from Dove pinctrl   Jason Cooper
• [PATCH] watchdog: orion_wdt: Use %pa to print 'phys_addr_t'   Jason Cooper
• [PATCH] watchdog: orion_wdt: Use %pa to print 'phys_addr_t'   Jason Cooper
• [PATCH] ARM: kirkwood: select dtbs based on SoC   Jason Cooper
• [PATCH] ARM: mvebu: select dtbs from MACH_ARMADA_*   Jason Cooper
• [RESEND PATCH] ARM: kirkwood: select dtbs based on SoC   Jason Cooper
• [RESEND PATCH] ARM: mvebu: select dtbs from MACH_ARMADA_*   Jason Cooper
• [PATCH 00/10] pinctrl: mvebu: remove hard-coded addresses from Dove pinctrl   Jason Cooper
• [PATCH] ARM: kirkwood: select dtbs based on SoC   Jason Cooper
• [PATCH] ARM: mvebu: select dtbs from MACH_ARMADA_*   Jason Cooper
• [PATCH v3 0/5] mvebu support for kirkwood HP T5325   Jason Cooper
• [PATCH 00/10] pinctrl: mvebu: remove hard-coded addresses from Dove pinctrl   Jason Cooper
• [PATCH 00/10] pinctrl: mvebu: remove hard-coded addresses from Dove pinctrl   Jason Cooper
• [PATCH 00/10] pinctrl: mvebu: remove hard-coded addresses from Dove pinctrl   Jason Cooper
• [PATCH 3/4] ARM: mvebu: move DT Dove to MVEBU   Jason Cooper
• [PATCH 0/4] ARM: dove: move Dove DT to MVEBU   Jason Cooper
• [PATCH 3/4] ARM: mvebu: move DT Dove to MVEBU   Jason Cooper
• [PATCH 2/4] ARM: dove: prepare new Dove DT Kconfig variable   Jason Cooper
• [GIT PULL] ARM: mvebu: watchdog driver changes for v3.15 (incr. pull #2)   Jason Cooper
• [GIT PULL] ARM: mvebu: driver changes for v3.15   Jason Cooper
• [GIT PULL] ARM: mvebu: soc changes for v3.15 (incr. pull #2)   Jason Cooper
• [PATCH] arm: sti: Remove SOC_STIH415 and SOC_STIH416   Maxime Coquelin
• [PATCH v2 0/6] ARM: STi reset controller support   Maxime Coquelin
• [PATCH 1/4] ARM: STi: add stid127 soc support   Maxime Coquelin
• [PATCH 5/5] ARM: tegra: cpuidle: use firmware call for power down   Alexandre Courbot
• [PATCH v2 0/6] ARM: firmware: improvements to Trusted Foundations support   Alexandre Courbot
• [PATCH v2 1/6] ARM: trusted_foundations: fix vendor prefix typos   Alexandre Courbot
• [PATCH v2 2/6] ARM: trusted_foundations: fallback when TF support is missing   Alexandre Courbot
• [PATCH v2 3/6] ARM: firmware: enable Trusted Foundations by default   Alexandre Courbot
• [PATCH v2 4/6] ARM: firmware: add prepare_idle() operation   Alexandre Courbot
• [PATCH v2 5/6] ARM: trusted_foundations: implement prepare_idle()   Alexandre Courbot
• [PATCH v2 6/6] ARM: tegra: cpuidle: use firmware for power down   Alexandre Courbot
• [PATCH v2 6/6] ARM: tegra: cpuidle: use firmware for power down   Alexandre Courbot
• [PATCH v3] ARM: tegra: cpuidle: use firmware for power down   Alexandre Courbot
• [PATCH v2 4/6] ARM: firmware: add prepare_idle() operation   Alexandre Courbot
• [PATCH] gpio: msm: switch Kconfig to ARCH_QCOM depends   Alexandre Courbot
• [PATCH] ARM: tegra: add device tree for SHIELD   Alexandre Courbot
• [PATCH] ARM: tegra: add device tree for SHIELD   Alexandre Courbot
• [PATCH] ARM: tegra: add device tree for SHIELD   Alexandre Courbot
• [PATCH] ARM: tegra: add device tree for SHIELD   Alexandre Courbot
• [PATCH] ARM: tegra: add device tree for SHIELD   Alexandre Courbot
• [PATCH] arm: document "mach-virt" platform.   Christopher Covington
• [PATCH v2 1/7] ARM: perf_event: Support percpu irqs for the CPU PMU   Christopher Covington
• [PATCH 01/18] arm64: initial support for GICv3   Christopher Covington
• [PATCH 1/3] driver core & of: Mark of_nodes of added device as populated   Christopher Covington
• [PATCH] ARM: Remove extraneous kcmp syscall ignore   Christopher Covington
• [PATCH v2] hwrng: msm: switch Kconfig to ARCH_QCOM depends   Christopher Covington
• [RFC PATCH 1/1] arm64: Add support for 48-bit Physical Address   Christopher Covington
• [RFC] ARM VM System Sepcification   Christopher Covington
• [RFC] ARM VM System Sepcification   Christopher Covington
• [RFC] ARM VM System Sepcification   Christopher Covington
• [PATCH] security: select correct default LSM_MMAP_MIN_ADDR on arm on arm64   Colin Cross
• [PATCH] dma-buf: avoid using IS_ERR_OR_NULL   Colin Cross
• [PATCH V8 0/2] Exynos5250 SATA Support   Yuvaraj Kumar C D
• [PATCH V8 1/2] PHY: Exynos: Add Exynos5250 SATA PHY driver   Yuvaraj Kumar C D
• [PATCH V8 2/2] ARM: dts: Enable ahci sata and sata phy   Yuvaraj Kumar C D
• [PATCH V5 4/8] phy: st-miphy-40lp: Add skeleton driver   Mohit KUMAR DCG
• [PATCH V6 07/12] phy: st-miphy-40lp: Add SPEAr1310 and SPEAr1340 PCIe phy support   Mohit KUMAR DCG
• [PATCH V5 4/8] phy: st-miphy-40lp: Add skeleton driver   Mohit KUMAR DCG
• [PATCH V5 4/8] phy: st-miphy-40lp: Add skeleton driver   Mohit KUMAR DCG
• [PATCH] iommu/exynos: Remove driver   Inki Dae
• [PATCH v6 0/3] Exynos 5410 support   Tarek Dakhran
• [PATCH v6 1/3] ARM: EXYNOS: Add support for EXYNOS5410 SoC   Tarek Dakhran
• [PATCH v6 2/3] clk: exynos5410: register clocks using common clock framework   Tarek Dakhran
• [PATCH v6 3/3] ARM: dts: Add initial device tree support for EXYNOS5410   Tarek Dakhran
• [PATCH v1 0/1] Boot all secondary cores on Exynos SoC's   Tarek Dakhran
• [PATCH v1 1/1] ARM: EXYNOS: enable boot all secondary cpus instead 2   Tarek Dakhran
• [PATCH v1 0/2] exynos_mct driver: fix irq allocation and cleanup   Tarek Dakhran
• [PATCH v1 1/2] clocksource: mct: remove request_irq from exynos4_local_timer_setup   Tarek Dakhran
• [PATCH v1 2/2] clocksource: mct: cleanup, remove non-dt stuff from mct   Tarek Dakhran
• [PATCH v1 0/2] exynos_mct driver: fix irq allocation and cleanup   Tarek Dakhran
• [PATCH v7 0/3] Exynos 5410 support   Tarek Dakhran
• [PATCH v7 1/3] ARM: EXYNOS: Add support for EXYNOS5410 SoC   Tarek Dakhran
• [PATCH v7 2/3] clk: exynos5410: register clocks using common clock framework   Tarek Dakhran
• [PATCH v7 3/3] ARM: dts: Add initial device tree support for EXYNOS5410   Tarek Dakhran
• [PATCH v2 2/3] ARM/ARM64: KVM: Add support for PSCI v0.2 emulation   Christoffer Dall
• [PATCH v2 3/3] KVM: Documentation: Add info regarding KVM_ARM_VCPU_PSCI_0_2 feature   Christoffer Dall
• [PATCH v2 1/3] KVM: Add capability to advertise PSCI v0.2 support   Christoffer Dall
• [PATCH] arm64: KVM: Add VGIC device control for arm64   Christoffer Dall
• [PATCH] arm: document "mach-virt" platform.   Christoffer Dall
• [PATCH] arm: document "mach-virt" platform.   Christoffer Dall
• [PATCH v2 2/3] ARM/ARM64: KVM: Add support for PSCI v0.2 emulation   Christoffer Dall
• [PATCH] arm: document "mach-virt" platform.   Christoffer Dall
• [PATCH v3 0/4] In-kernel PSCI v0.2 emulation for KVM ARM/ARM64   Christoffer Dall
• [PATCH] ARM: spinlock: ensure we have a compiler barrier before sev   Christoffer Dall
• [PATCH] ARM: KVM: fix warning in mmu.c   Christoffer Dall
• [PATCH v3 05/11] ARM: LPAE: provide an IPA capable pmd_addr_end   Christoffer Dall
• [PATCH v3 04/11] arm64: KVM: flush VM pages before letting the guest enable caches   Christoffer Dall
• [PATCH v3 11/11] ARM: KVM: trap VM system registers until MMU and caches are ON   Christoffer Dall
• [PATCH v3 05/11] ARM: LPAE: provide an IPA capable pmd_addr_end   Christoffer Dall
• [PATCH 01/18] arm64: initial support for GICv3   Christoffer Dall
• [PATCH 02/18] arm64: GICv3 device tree binding documentation   Christoffer Dall
• [PATCH 01/18] arm64: initial support for GICv3   Christoffer Dall
• BUG: Null pointer dereference on booting TC2 with vexpress_defconfig   Christoffer Dall
• BUG: Null pointer dereference on booting TC2 with vexpress_defconfig   Christoffer Dall
• BUG: Null pointer dereference on booting TC2 with vexpress_defconfig   Christoffer Dall
• [PATCH v4 04/12] ARM: KVM: introduce kvm_p*d_addr_end   Christoffer Dall
• [PATCH v4 12/12] ARM: KVM: fix warning in mmu.c   Christoffer Dall
• BUG: Null pointer dereference on booting TC2 with vexpress_defconfig   Christoffer Dall
• [PATCH] arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT   Christoffer Dall
• [PATCH] arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT   Christoffer Dall
• [PATCH v2] arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT   Christoffer Dall
• [PATCH v2] arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT   Christoffer Dall
• [RFC] ARM VM System Sepcification   Christoffer Dall
• [RFC] ARM VM System Sepcification   Christoffer Dall
• [RFC] ARM VM System Sepcification   Christoffer Dall
• [RFC] ARM VM System Sepcification   Christoffer Dall
• [RFC] ARM VM System Sepcification   Christoffer Dall
• [RFC] ARM VM System Sepcification   Christoffer Dall
• [RFC] ARM VM System Sepcification   Christoffer Dall
• [RFC] ARM VM System Sepcification   Christoffer Dall
• [PATCH] ARM: shmobile: Use 64-bit dma_addr_t on r8a7790/r8a7791   Magnus Damm
• [PATCH 0/2] Add Ether's PHY IRQ support for Lager/Koelsh boards   Magnus Damm
• [PATCH 00/11] ARM: shmobile: RSPI RZ and QSPI SoC and board integration   Magnus Damm
• [PATCH 02/03] pinctrl: sh-pfc: r8a7790: Break out USB0 OVC/VBUS   Magnus Damm
• [PATCH] ARM: shmobile: Remove legacy r8a7790 DT clocks   Magnus Damm
• [PATCH 0/7] ARM: shmobile: r8a7790/Lager QSPI SoC/board integration   Magnus Damm
• [PATCH 00/03] ARM: shmobile: Clean up the EMEV2 and KZM9D code base   Magnus Damm
• [PATCH 01/03] ARM: shmobile: Remove legacy EMEV2 SoC support   Magnus Damm
• [PATCH 02/03] ARM: shmobile: Remove KZM9D board code   Magnus Damm
• [PATCH 03/03] ARM: shmobile: Get rid of legacy KZM9D defconfig   Magnus Damm
• [PATCH/RFC] ARM: shmobile: Add defconfig for shmobile mulitplatfom   Magnus Damm
• [PATCH] ARM: shmobile: lager: Add internal USB PCI support   Magnus Damm
• [PATCH v4] ARM: shmobile: Add defconfig for shmobile mulitplatfom   Magnus Damm
• [PATCH] ARM: shmobile: lager: Add internal USB PCI support   Magnus Damm
• [PATCH 23/27] clocksource: sh_cmt: Add DT support   Magnus Damm
• [PATCH 23/27] clocksource: sh_cmt: Add DT support   Magnus Damm
• [PATCH 02/03] ARM: shmobile: Remove KZM9D board code   Magnus Damm
• [PATCH 11/27] clocksource: sh_cmt: Add support for multiple channels per device   Magnus Damm
• [PATCH 23/27] clocksource: sh_cmt: Add DT support   Magnus Damm
• [PATCH 11/27] clocksource: sh_cmt: Add support for multiple channels per device   Magnus Damm
• [PATCH 0/5] enable i2c on koelsch-dt (and cleanup lager)   Magnus Damm
• [PATCH] ARM: shmobile: Check MD21 at SMP boot in case of APMU   Magnus Damm
• [PATCH] ARM: shmobile: Remove __init from rcar_gen2_read_mode_pins()   Magnus Damm
• [PATCH] ARM: shmobile: Remove Lager DT reference legacy clock bits   Magnus Damm
• [PATCH] ARM: shmobile: Remove Koelsch DT reference legacy clock bits   Magnus Damm
• [PATCH v2] ARM: shmobile: Remove KZM9D board code   Magnus Damm
• [PATCH] ARM: shmobile: Remove EMEV2 header file   Magnus Damm
• [PATCH] ARM: shmobile: Check MD21 at SMP boot in case of APMU   Magnus Damm
• [PATCH 2/5] ARM: shmobile: r8a7791: add i2c master nodes to dtsi   Magnus Damm
• [PATCH 2/5] ARM: shmobile: r8a7791: add i2c master nodes to dtsi   Magnus Damm
• [PATCH 2/5] ARM: shmobile: r8a7791: add i2c master nodes to dtsi   Magnus Damm
• [PATCH 2/5] ARM: shmobile: r8a7791: add i2c master nodes to dtsi   Magnus Damm
• [PATCH] ARM: shmobile: Check MD21 at SMP boot in case of APMU   Magnus Damm
• [PATCH] ARM: shmobile: Remove __init from rcar_gen2_read_mode_pins()   Magnus Damm
• [PATCH V2 1/2] ARM: shmobile: r8a7791: add i2c master nodes to dtsi   Magnus Damm
• [PATCH V2 2/2] ARM: shmobile: r8a7791: add i2c2 bus to koelsch dt   Magnus Damm
• [PATCH 23/27] clocksource: sh_cmt: Add DT support   Magnus Damm
• [PATCH] ARM: shmobile: Remove EMEV2 header file   Magnus Damm
• [PATCH v4 0/2] [RESEND] Lager and Koelsch reference serial port support   Magnus Damm
• [PATCH 01/03] ARM: shmobile: Remove legacy EMEV2 SoC support   Magnus Damm
• [PATCH] ARM: shmobile: MCPM and CCI prototype   Magnus Damm
• [PATCH] ARM: shmobile: Break out R-Car SYSC PM code   Magnus Damm
• [PATCH 04/11] ARM: shmobile: lager legacy: Add MSIOF support   Magnus Damm
• [PATCH 04/11] ARM: shmobile: lager legacy: Add MSIOF support   Magnus Damm
• [PATCH 00/12] ARM: shmobile: Rework include path for SoC files   Magnus Damm
• [PATCH 01/12] ARM: shmobile: Add temporary include workaround   Magnus Damm
• [PATCH 02/12] ARM: shmobile: Rework include path for sh7372   Magnus Damm
• [PATCH 03/12] ARM: shmobile: Rework include path for sh73a0   Magnus Damm
• [PATCH 04/12] ARM: shmobile: Rework include path for EMEV2   Magnus Damm
• [PATCH 05/12] ARM: shmobile: Rework include path for r8a7740   Magnus Damm
• [PATCH 06/12] ARM: shmobile: Rework include path for r8a7778   Magnus Damm
• [PATCH 07/12] ARM: shmobile: Rework include path for r8a7779   Magnus Damm
• [PATCH 08/12] ARM: shmobile: Rework include path for r8a7790   Magnus Damm
• [PATCH 09/12] ARM: shmobile: Rework include path for r8a7791   Magnus Damm
• [PATCH 10/12] ARM: shmobile: Rework include path for r8a73a4   Magnus Damm
• [PATCH 11/12] ARM: shmobile: Rework include path for r7s72100   Magnus Damm
• [PATCH 12/12] ARM: shmobile: Rework include path for common bits   Magnus Damm
• [PATCH] ARM: shmobile: Make use of r8a7790_add_standard_devices()   Magnus Damm
• [PATCH] ARM: shmobile: Move SYSC base variable to inside ifdefs   Magnus Damm
• [PATCH 01/12] ARM: shmobile: Add temporary include workaround   Magnus Damm
• [PATCH 00/03] ARM: shmobile: Break out and extend clock workaround   Magnus Damm
• [PATCH 01/03] ARM: shmobile: Introduce shmobile_clk_workaround()   Magnus Damm
• [PATCH 02/03] ARM: shmobile: Use shmobile_clk_workaround() on Lager   Magnus Damm
• [PATCH 03/03] ARM: shmobile: Use shmobile_clk_workaround() on Koelsch   Magnus Damm
• [PATCH 00/02] ARM: shmobile: Lager DT Reference USB PCI support   Magnus Damm
• [PATCH 01/02] ARM: shmobile: Lager DT USB PCI pinctrl setup via DTS   Magnus Damm
• [PATCH 02/02] ARM: shmobile: Lager DT USB PCI platform devices   Magnus Damm
• [PATCH 04/11] ARM: shmobile: lager legacy: Add MSIOF support   Magnus Damm
• [PATCH v2] ARM: shmobile: Add temporary include workaround   Magnus Damm
• DMABOUNCE in pci-rcar   Magnus Damm
• DMABOUNCE in pci-rcar   Magnus Damm
• [PATCH] ARM: shmobile: Break out R-Car SYSC PM code   Magnus Damm
• [GIT PULL 00/21] Renesas ARM based SoC Board Updates for v3.15   Magnus Damm
• [PATCH] ARM: shmobile: Check r8a7791 MD21 at SMP boot   Magnus Damm
• [PATCH 00/02] ARM: shmobile: CCI and MCPM support for r8a7790   Magnus Damm
• [PATCH 01/02] ARM: shmobile: Hook in MCPM and CCI to APMU code   Magnus Damm
• [PATCH 02/02] ARM: shmobile: Add CCI nodes to r8a7790 DTS   Magnus Damm
• [PATCH] ARM: shmobile: Check r8a7791 MD21 at SMP boot   Magnus Damm
• [GIT PULL 00/21] Renesas ARM based SoC Board Updates for v3.15   Magnus Damm
• Stuck getting DTS working for a new kirkwood board   Dashie
• Stuck getting DTS working for a new kirkwood board   Dashie
• Stuck getting DTS working for a new kirkwood board   Dashie
• Stuck getting DTS working for a new kirkwood board   Dashie
• Stuck getting DTS working for a new kirkwood board   Dashie
• Stuck getting DTS working for a new kirkwood board   Dashie
• Stuck getting DTS working for a new kirkwood board   Dashie
• Stuck getting DTS working for a new kirkwood board   Dashie
• [GIT PULL] bcm pinctrl rename   Christian Daudt
• [PATCH v2] MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer   Christian Daudt
• [PATCH 12/28] Remove GENERIC_TIME   Christian Daudt
• [PATCH v2] ARM: dts: remove bcm11351-brt.dts   Christian Daudt
• [GIT PULL] bcm pinctrl rename   Christian Daudt
• [GIT PULL] bcm pinctrl rename   Christian Daudt
• [PATCH v4 2/5] arm: add new asm macro update_sctlr   Will Deacon
• [PATCH V3 5/5] ARM CoreSight: ETM: Add PID control support   Will Deacon
• [PATCH V2] arm64: add DSB after icache flush in __flush_icache_all()   Will Deacon
• [PATCH v4 2/5] arm: add new asm macro update_sctlr   Will Deacon
• [PATCH 5/5] arm64: add Crypto Extensions based synchronous core AES cipher   Will Deacon
• iommu/arm-smmu: Regression (sleeping function called from invalid context)   Will Deacon
• [PATCH resend 1/2] arm64: defer reloading a task's FPSIMD state to userland resume   Will Deacon
• [PATCH v2 08/11] of: Increase MAX_PHANDLE_ARGS   Will Deacon
• [PATCH v4 2/5] arm: add new asm macro update_sctlr   Will Deacon
• [PATCH] security: select correct default LSM_MMAP_MIN_ADDR on arm on arm64   Will Deacon
• [PATCH] ARM: mm: ensure TLB invalidation is complete before enabling MMU   Will Deacon
• [PATCH] ARM: mm: remove remaining domain support from ARMv6   Will Deacon
• [PATCH] ARM: spinlock: ensure we have a compiler barrier before sev   Will Deacon
• [PATCH 1/2] arm64: atomics: fix use of acquire + release for full barrier semantics   Will Deacon
• [PATCH 2/2] arm64: asm: remove redundant "cc" clobbers   Will Deacon
• [PATCH 1/2] ARM: prefetch: add prefetchw invocations for barriered atomics   Will Deacon
• [PATCH 2/2] ARM: atomics: implement a better __atomic_add_unless for v6+   Will Deacon
• [PATCH 0/3] ARM: PCI: implement virtual PCI host controller   Will Deacon
• [PATCH 1/3] ARM: bios32: use pci_enable_resource to enable PCI resources   Will Deacon
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Will Deacon
• [PATCH 3/3] ARM: mach-virt: allow PCI support to be selected   Will Deacon
• [PATCH 1/2] arm64: atomics: fix use of acquire + release for full barrier semantics   Will Deacon
• [PATCH resend 1/2] arm64: defer reloading a task's FPSIMD state to userland resume   Will Deacon
• [PATCH v3 1/3] arm64: Add regs_return_value() in syscall.h   Will Deacon
• [PATCH v3 2/3] arm64: Add audit support   Will Deacon
• [PATCH v3 3/3] arm64: audit: Add audit hook in ptrace/syscall_trace   Will Deacon
• [PATCH 1/2] arm64: vdso: fix coarse clock handling   Will Deacon
• [PATCH 2/2] arm64: vdso: update wtm fields for CLOCK_MONOTONIC_COARSE   Will Deacon
• Weird sched_clock behaviour during boot with -rc1   Will Deacon
• [PATCH v2 1/2] arm64: vdso: fix coarse clock handling   Will Deacon
• [PATCH] arm64: add DSB after icache flush in __flush_icache_all()   Will Deacon
• [PATCH] arm64: fix early_io_map for 64K pages   Will Deacon
• [PATCH 02/22] arm: add new asm macro update_sctlr   Will Deacon
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Will Deacon
• IOMMU DMA-mapping API for arm64 ?   Will Deacon
• [PATCH] arm64: Change misleading function names in dma-mapping   Will Deacon
• [PATCH 08/51] arm, hw-breakpoint: Fix CPU hotplug callback registration   Will Deacon
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Will Deacon
• [PATCH 1/6] arm64: barriers: allow dsb macro to take option parameter   Will Deacon
• [PATCH 2/6] arm64: barriers: make use of barrier options with explicit barriers   Will Deacon
• [PATCH 3/6] irqchip: gic: use writel instead of dsb + writel_relaxed   Will Deacon
• [PATCH 4/6] iommu/arm-smmu: provide option to dsb macro when publishing tables   Will Deacon
• [PATCH 5/6] arm64: barriers: wire up new barrier options   Will Deacon
• [PATCH 6/6] arm64: barriers: use barrier() instead of smp_mb() when !SMP   Will Deacon
• [PATCH 08/51] arm, hw-breakpoint: Fix CPU hotplug callback registration   Will Deacon
• [PATCH 28/51] arm64, hw_breakpoint.c: Fix CPU hotplug callback registration   Will Deacon
• [PATCH 29/51] arm64, debug-monitors: Fix CPU hotplug callback registration   Will Deacon
• [PATCH 2/6] arm64: barriers: make use of barrier options with explicit barriers   Will Deacon
• [PATCH 3/6] irqchip: gic: use writel instead of dsb + writel_relaxed   Will Deacon
• [PATCH 2/6] arm64: barriers: make use of barrier options with explicit barriers   Will Deacon
• [PATCH 3/6] irqchip: gic: use writel instead of dsb + writel_relaxed   Will Deacon
• [PATCH 3/6] irqchip: gic: use writel instead of dsb + writel_relaxed   Will Deacon
• [PATCH 3/6] irqchip: gic: use writel instead of dsb + writel_relaxed   Will Deacon
• [PATCH 0/5] iommu/arm-smmu: fixes for 3.14   Will Deacon
• [PATCH 1/5] iommu/arm-smmu: fix pud/pmd entry fill sequence   Will Deacon
• [PATCH 2/5] iommu/arm-smmu: really fix page table locking   Will Deacon
• [PATCH 3/5] iommu/arm-smmu: fix table flushing during initial allocations   Will Deacon
• [PATCH 4/5] iommu/arm-smmu: set CBARn.BPSHCFG to NSH for s1-s2-bypass contexts   Will Deacon
• [PATCH 5/5] iommu/arm-smmu: fix compilation issue when !CONFIG_ARM_AMBA   Will Deacon
• [PATCH 3/6] irqchip: gic: use writel instead of dsb + writel_relaxed   Will Deacon
• [PATCH v2 1/7] ARM: perf_event: Support percpu irqs for the CPU PMU   Will Deacon
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Will Deacon
• [PATCH] ARM: mm: implement pte_accessible for faulting mappings   Will Deacon
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Will Deacon
• [PATCH v2] sched_clock: Prevent callers from seeing half-updated data   Will Deacon
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Will Deacon
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Will Deacon
• [PATCH v2 1/5] arm64: barriers: make use of barrier options with explicit barriers   Will Deacon
• [PATCH v2 2/5] irqchip: gic: use writel instead of dsb + writel_relaxed   Will Deacon
• [PATCH v2 3/5] iommu/arm-smmu: provide option to dsb macro when publishing tables   Will Deacon
• [PATCH v2 4/5] arm64: barriers: wire up new barrier options   Will Deacon
• [PATCH v2 5/5] arm64: barriers: use barrier() instead of smp_mb() when !SMP   Will Deacon
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Will Deacon
• [RFC/PATCH v2] ARM: vDSO gettimeofday using generic timer architecture   Will Deacon
• [PATCH 0/3] arm64: Use pte manipulation functions for THP   Will Deacon
• [PATCH v6 0/3] perf: AARCH64 arch support   Will Deacon
• [PATCH] perf: ARM64: wire up perf_regs and unwind support   Will Deacon
• [PATCH] arm64: fix psci power state pack   Will Deacon
• [PATCH 0/3] arm64: Use pte manipulation functions for THP   Will Deacon
• [PATCH] arm64: vdso: clean up vdso_pagelist initialization   Will Deacon
• [PATCH] perf: ARM64: wire up perf_regs and unwind support   Will Deacon
• [PATCH] arm64: smp: Add a memory barrier before we start secondary cores   Will Deacon
• [PATCH v2 0/9] ARM: multi-platform kconfig cleanup and mach-virt removal   Will Deacon
• [PATCH 1/3] ARM: bios32: use pci_enable_resource to enable PCI resources   Will Deacon
• [PATCH v2 0/9] ARM: multi-platform kconfig cleanup and mach-virt removal   Will Deacon
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Will Deacon
• [PATCH v2 0/9] ARM: multi-platform kconfig cleanup and mach-virt removal   Will Deacon
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Will Deacon
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Will Deacon
• [PATCH v2 0/3] ARM: PCI: implement generic PCI host controller   Will Deacon
• [PATCH v2 1/3] ARM: mach-virt: allow PCI support to be selected   Will Deacon
• [PATCH v2 2/3] ARM: bios32: use pci_enable_resource to enable PCI resources   Will Deacon
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Will Deacon
• [PATCH v2 2/3] ARM: bios32: use pci_enable_resource to enable PCI resources   Will Deacon
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Will Deacon
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Will Deacon
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Will Deacon
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Will Deacon
• [PATCH 5/5] iommu/arm-smmu: fix compilation issue when !CONFIG_ARM_AMBA   Will Deacon
• [BISECTED] ssh - Received disconnect from x.x.x.x: 2: Bad packet length 3149594624   Will Deacon
• [BISECTED] ssh - Received disconnect from x.x.x.x: 2: Bad packet length 3149594624   Will Deacon
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Will Deacon
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Will Deacon
• [BISECTED] ssh - Received disconnect from x.x.x.x: 2: Bad packet length 3149594624   Will Deacon
• [PATCH 3/6] irqchip: gic: use writel instead of dsb + writel_relaxed   Will Deacon
• [PATCH v2] sched_clock: Prevent callers from seeing half-updated data   Will Deacon
• [PATCH] arm64: make a single hook to syscall_trace() for all syscall features   Will Deacon
• [PATCH v4 3/3] arm64: audit: Add audit hook in ptrace/syscall_trace   Will Deacon
• [PATCH v3 1/6] arm64: Add ftrace support   Will Deacon
• [PATCH v3 5/6] arm64: ftrace: Add system call tracepoint   Will Deacon
• [PATCH 2/2] arm64: is_compat_task is defined both in asm/compat.h and linux/compat.h   Will Deacon
• [PATCH v3 0/3] ARM: PCI: implement generic PCI host controller   Will Deacon
• [PATCH v3 1/3] ARM: mach-virt: allow PCI support to be selected   Will Deacon
• [PATCH v3 2/3] ARM: bios32: use pci_enable_resource to enable PCI resources   Will Deacon
• [PATCH v3 3/3] PCI: ARM: add support for generic PCI host controller   Will Deacon
• [PATCH] ARM: kernel: improve error message when LPAE config doesn't match CPU   Will Deacon
• [PATCH v3 3/3] PCI: ARM: add support for generic PCI host controller   Will Deacon
• [PATCH v3 3/3] PCI: ARM: add support for generic PCI host controller   Will Deacon
• [PATCH v3 3/3] PCI: ARM: add support for generic PCI host controller   Will Deacon
• [PATCH v3 3/3] PCI: ARM: add support for generic PCI host controller   Will Deacon
• [PATCH v3 2/3] ARM: bios32: use pci_enable_resource to enable PCI resources   Will Deacon
• [PATCH v3 3/3] PCI: ARM: add support for generic PCI host controller   Will Deacon
• [PATCH v3 3/3] PCI: ARM: add support for generic PCI host controller   Will Deacon
• [PATCH v3 3/3] PCI: ARM: add support for generic PCI host controller   Will Deacon
• [PATCH v3 3/3] PCI: ARM: add support for generic PCI host controller   Will Deacon
• [PATCH v3 3/3] PCI: ARM: add support for generic PCI host controller   Will Deacon
• [PATCH v3 3/3] PCI: ARM: add support for generic PCI host controller   Will Deacon
• [PATCH v3 1/5] arm64: barriers: make use of barrier options with explicit barriers   Will Deacon
• [PATCH v3 2/5] irqchip: gic: use dmb ishst instead of dsb when raising a softirq   Will Deacon
• [PATCH v3 3/5] iommu/arm-smmu: provide option to dsb macro when publishing tables   Will Deacon
• [PATCH v3 4/5] arm64: barriers: wire up new barrier options   Will Deacon
• [PATCH v3 5/5] arm64: barriers: use barrier() instead of smp_mb() when !SMP   Will Deacon
• [PATCH v3 3/3] PCI: ARM: add support for generic PCI host controller   Will Deacon
• [PATCH v9 1/6] arm64: Add macros to manage processor debug state   Will Deacon
• [PATCH v3 2/3] ARM: bios32: use pci_enable_resource to enable PCI resources   Will Deacon
• [PATCH v9 1/6] arm64: Add macros to manage processor debug state   Will Deacon
• [PATCH v9 1/6] arm64: Add macros to manage processor debug state   Will Deacon
• [RFC PATCH 1/2] arm: mm: Switch back to L_PTE_WRITE   Will Deacon
• [RFC PATCH 2/2] arm: mm: Double logical invert for LPAE pte_write(), pte_dirty()   Will Deacon
• [PATCH] irqchip: gic: use dmb ishst instead of dsb when raising a softirq   Will Deacon
• linux-next: manual merge of the arm-soc tree with the arm-perf tree   Will Deacon
• [PATCH v3 2/3] ARM: bios32: use pci_enable_resource to enable PCI resources   Will Deacon
• [PATCH 0/3] ARM: perf: updates for 3.15   Will Deacon
• [PATCH 1/3] ARM: perf: hook up perf_sample_event_took around pmu irq handling   Will Deacon
• [PATCH 2/3] ARM: perf: remove unused PMU probing code   Will Deacon
• [PATCH 3/3] ARM: perf: add support for the Cortex-A12 PMU   Will Deacon
• [PATCH 0/5] iommu/arm-smmu: updates for 3.15   Will Deacon
• [PATCH 1/5] iommu/arm-smmu: set MAX_MASTER_STREAMIDS to MAX_PHANDLE_ARGS   Will Deacon
• [PATCH 2/5] iommu/arm-smmu: support buggy implementations with secure cfg accesses   Will Deacon
• [PATCH 3/5] documentation/iommu: update description of ARM System MMU binding   Will Deacon
• [PATCH 4/5] iommu/arm-smmu: clean up use of `flags' in page table handling code   Will Deacon
• [PATCH 5/5] iommu/arm-smmu: provide option to dsb macro when publishing tables   Will Deacon
• [RFC PATCH 1/2] arm: mm: Switch back to L_PTE_WRITE   Will Deacon
• [RFC PATCH 0/2] Introduce pte_isset for arm and arm64   Will Deacon
• [PATCH 0/2] CCI PMU update   Will Deacon
• [PATCH] irqchip: gic: use dmb ishst instead of dsb when raising a softirq   Will Deacon
• [PATCH v4] PCI: ARM: add support for generic PCI host controller   Will Deacon
• [BISECTED] ssh - Received disconnect from x.x.x.x: 2: Bad packet length 3149594624   Will Deacon
• [BISECTED] ssh - Received disconnect from x.x.x.x: 2: Bad packet length 3149594624   Will Deacon
• [PATCH v2 1/1] audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL   Will Deacon
• [PATCH v2 1/1] arm64: make a single hook to syscall_trace() for all syscall features   Will Deacon
• [PATCH V2 0/3] PTE fixes for arm and arm64   Will Deacon
• [PATCH v4] PCI: ARM: add support for generic PCI host controller   Will Deacon
• [PATCH 01/18] arm64: initial support for GICv3   Will Deacon
• [PATCH 03/18] arm64: boot protocol documentation update for GICv3   Will Deacon
• [PATCH 15/18] arm64: KVM: split GICv2 world switch from hyp code   Will Deacon
• [PATCH 17/18] KVM: ARM: vgic: add the GICv3 backend   Will Deacon
• [PATCH 18/18] arm64: KVM: vgic: add GICv3 world switch   Will Deacon
• [PATCH v4 0/6] generic early_ioremap support   Will Deacon
• [PATCH 0/2] CCI PMU update   Will Deacon
• [PATCH v7 5/9] ARM: Enable erratum 798181 for Broadcom Brahma-B15   Will Deacon
• [PATCH v2 1/1] arm64: make a single hook to syscall_trace() for all syscall features   Will Deacon
• arm64 cache maintenance on read only address loops forever   Will Deacon
• [PATCH 03/18] arm64: boot protocol documentation update for GICv3   Will Deacon
• [PATCH 03/18] arm64: boot protocol documentation update for GICv3   Will Deacon
• [PATCH v4] PCI: ARM: add support for generic PCI host controller   Will Deacon
• ARM64: Not all h/w events are mapped in perf_event.c   Will Deacon
• [PATCH 01/18] arm64: initial support for GICv3   Will Deacon
• [PATCH 17/18] KVM: ARM: vgic: add the GICv3 backend   Will Deacon
• arm64 cache maintenance on read only address loops forever   Will Deacon
• [GIT PULL] iommu/arm-smmu: updates for 3.15   Will Deacon
• [GIT PULL] ARM perf updates for 3.15   Will Deacon
• [PATCH v3 1/2] arm64: make a single hook to syscall_trace() for all syscall features   Will Deacon
• [PATCH v6 2/2] arm64: audit: Add audit hook in ptrace/syscall_trace   Will Deacon
• [PATCH 3/5] documentation/iommu: update description of ARM System MMU binding   Will Deacon
• [PATCH 1/2] iommu/arm-smmu: Replace list walk with platform driver data   Will Deacon
• [PATCH 2/2] iommu/arm-smmu: Return 0 on unmap failure   Will Deacon
• [PATCH v2 3/3] arm64: is_compat_task is defined both in asm/compat.h and linux/compat.h   Will Deacon
• [PATCH v2 2/3] arm64: Add seccomp support   Will Deacon
• [RFC v2 PATCH 1/1] ARM64: KGDB: Add FP/SIMD debug support   Will Deacon
• [PATCH] ARM: at91: add Atmel's SAMA5D3 Xplained board   Ludovic Desroches
• [PATCH v2] dt: platform driver: Fill the resources before probe and defer if needed   Ludovic Desroches
• [PATCH 1/2] mfd: palmas: support IRQ inversion at the board level   Laxman Dewangan
• [PATCH 2/2] ARM: tegra: fix Dalmore PMIC IRQ polarity   Laxman Dewangan
• [PATCH 1/2] PPC: powernv: remove redundant cpuidle_idle_call()   Deepthi Dharwar
• [PATCH 1/2] PPC: powernv: remove redundant cpuidle_idle_call()   Deepthi Dharwar
• [PATCH] ARM: tegra: don't timeout if CPU is powergated   Marc Dietrich
• [PATCHv2 1/5] ARM: tegra: remove obsolete gpio entries   Marc Dietrich
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Russ Dill
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Russ Dill
• [PATCH RFC v1 1/3] ARM: Add irq disabled version of soft_restart.   Russ Dill
• [PATCH RFC v1 1/3] ARM: Add irq disabled version of soft_restart.   Russ Dill
• [PATCH v4 2/2] ARM hibernation / suspend-to-disk   Russ Dill
• [PATCH v6 2/2] ARM hibernation / suspend-to-disk   Russ Dill
• [BISECTED] ssh - Received disconnect from x.x.x.x: 2: Bad packet length 3149594624   Ivaylo Dimitrov
• [BISECTED] ssh - Received disconnect from x.x.x.x: 2: Bad packet length 3149594624   Ivaylo Dimitrov
• [BISECTED] ssh - Received disconnect from x.x.x.x: 2: Bad packet length 3149594624   Ivaylo Dimitrov
• [BISECTED] ssh - Received disconnect from x.x.x.x: 2: Bad packet length 3149594624   Ivaylo Dimitrov
• [BISECTED] ssh - Received disconnect from x.x.x.x: 2: Bad packet length 3149594624   Ivaylo Dimitrov
• [BISECTED] ssh - Received disconnect from x.x.x.x: 2: Bad packet length 3149594624   Ivaylo Dimitrov
• [Linux-kernel] [PATCH 2/3] ARM: shmobile: r8a7790: specify multiple parents for cpg_clks   Ben Dooks
• [PATCH 1/2] clk: shmobile: rcar-gen2: Fix clock parent all non-PLL clocks   Ben Dooks
• [Linux-kernel] [PATCH 2/3] ARM: shmobile: r8a7790: specify multiple parents for cpg_clks   Ben Dooks
• [PATCH 1/3] clk: rcar-h2: fix sd0/sd1 divisor table   Ben Dooks
• [PATCH 1/2] clk: shmobile: rcar-gen2: Fix clock parent all non-PLL clocks   Ben Dooks
• [PATCH 1/3] clk: rcar-h2: fix sd0/sd1 divisor table   Ben Dooks
• [PATCH 1/3] mmc: tmio-mmc: add DMA SG synchronisation   Ben Dooks
• [PATCH 1/3] clk: rcar-h2: fix sd0/sd1 divisor table   Ben Dooks
• imprecise abort behaviour   Ben Dooks
• [PATCH] ARM: mm: add imprecise abort non-deadly handler   Ben Dooks
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Ben Dooks
• [PATCH] ARM: shmobile: r8a7790: Correct SYS DMAC clock defines   Ben Dooks
• [PATCH 1/2] ARM: shmobile: r8a7791: add Ether DT support   Ben Dooks
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Ben Dooks
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Ben Dooks
• [PATCH] ARM: mm: add imprecise abort non-deadly handler   Ben Dooks
• [PATCH] ARM: mm: support big-endian page tables   Ben Dooks
• [PATCH] ARM: shmobile: set proper DMA masks for Ether devices   Ben Dooks
• [PATCH] ARM: shmobile: set proper DMA masks for Ether devices   Ben Dooks
• [PATCH] ARM: shmobile: set proper DMA masks for Ether devices   Ben Dooks
• [PATCH v3] input: sirfsoc-onkey - report onkey untouch event by detecting pin status   Xianglong Du
• [PATCH 1/3] irqchip: exynos-combiner: call handle_bad_irq directly   Pankaj Dubey
• [PATCH] clocksource: exynos_mct: remove unwanted header file inclusion   Pankaj Dubey
• [PATCH] clk: samsung: fixed compiler warning [-Wpointer-to-int-cast]   Pankaj Dubey
• [PATCH] clk: samsung: remove parentheses from return statements   Pankaj Dubey
• [PATCH] clk: samsung: remove parentheses from return statements   Pankaj Dubey
• [PATCH 0/3] introduce new config option for samsung common clock   Pankaj Dubey
• [PATCH 1/3] drivers: clk: add samsung common clock config option   Pankaj Dubey
• [PATCH 2/3] ARM: select COMMON_CLK_SAMSUNG for ARCH_EXYNOS and ARCH_S3C64XX   Pankaj Dubey
• [PATCH 3/3] ARM: S3C24XX: select COMMON_CLK_SAMSUNG for S3C24XX   Pankaj Dubey
• [PATCH 3/3] ARM: S3C24XX: select COMMON_CLK_SAMSUNG for S3C24XX   Pankaj Dubey
• [PATCH] [RFC] Support for creating generic host_bridge from device tree   Liviu Dudau
• [PATCH] pci: Add support for creating a generic host_bridge from device tree   Liviu Dudau
• [PATCH] [RFC] Add AArch64 support for PCI   Liviu Dudau
• [PATCH] arm64: Add architecture support for PCI   Liviu Dudau
• [PATCH] pci: Add support for creating a generic host_bridge from device tree   Liviu Dudau
• [PATCH] arm64: Add architecture support for PCI   Liviu Dudau
• [PATCH] arm64: Add architecture support for PCI   Liviu Dudau
• [PATCH] pci: Add support for creating a generic host_bridge from device tree   Liviu Dudau
• [PATCH] arm64: Add architecture support for PCI   Liviu Dudau
• [PATCH] pci: Add support for creating a generic host_bridge from device tree   Liviu Dudau
• [PATCH] arm64: Add architecture support for PCI   Liviu Dudau
• [PATCH] pci: Add support for creating a generic host_bridge from device tree   Liviu Dudau
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Liviu Dudau
• [PATCH] pci: Add support for creating a generic host_bridge from device tree   Liviu Dudau
• [PATCH] pci: Add support for creating a generic host_bridge from device tree   Liviu Dudau
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Liviu Dudau
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Liviu Dudau
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Liviu Dudau
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Liviu Dudau
• [PATCH] arm64: Add architecture support for PCI   Liviu Dudau
• [PATCH v4] PCI: ARM: add support for generic PCI host controller   Liviu Dudau
• [PATCH v2 0/4] [RFC] Support for creating generic host_bridge from device tree   Liviu Dudau
• [PATCH v2 1/4] pci: OF: Fix the conversion of IO ranges into IO resources.   Liviu Dudau
• [PATCH v2 2/4] pci: Create pci_host_bridge before its associated bus in pci_create_root_bus.   Liviu Dudau
• [PATCH v2 3/4] pci: Introduce a domain number for pci_host_bridge.   Liviu Dudau
• [PATCH v2 4/4] pci: Add support for creating a generic host_bridge from device tree   Liviu Dudau
• [PATCH v2 0/3] [RFC] Add support for PCI in AArch64   Liviu Dudau
• [PATCH v2 1/3] Fix ioport_map() for !CONFIG_GENERIC_IOMAP cases.   Liviu Dudau
• [PATCH v2 2/3] arm64: Extend the PCI I/O space to 16MB   Liviu Dudau
• [PATCH v2 3/3] arm64: Add architecture support for PCI   Liviu Dudau
• [PATCH v2 3/3] arm64: Add architecture support for PCI   Liviu Dudau
• [PATCH v2 1/4] pci: OF: Fix the conversion of IO ranges into IO resources.   Liviu Dudau
• [PATCH v2 4/4] pci: Add support for creating a generic host_bridge from device tree   Liviu Dudau
• [PATCH v2 1/4] pci: OF: Fix the conversion of IO ranges into IO resources.   Liviu Dudau
• [PATCH v3 0/5] [RFC] Support for creating generic host_bridge from device tree   Liviu Dudau
• [PATCH v3 1/5] pci: Introduce pci_register_io_range() helper function.   Liviu Dudau
• [PATCH v3 2/5] pci: OF: Fix the conversion of IO ranges into IO resources.   Liviu Dudau
• [PATCH v3 3/5] pci: Create pci_host_bridge before its associated bus in pci_create_root_bus.   Liviu Dudau
• [PATCH v3 4/5] pci: Introduce a domain number for pci_host_bridge.   Liviu Dudau
• [PATCH v3 5/5] pci: Add support for creating a generic host_bridge from device tree   Liviu Dudau
• [PATCH v3 0/3] [RFC] Add support for PCI in AArch64   Liviu Dudau
• [PATCH v3 1/3] Fix ioport_map() for !CONFIG_GENERIC_IOMAP cases.   Liviu Dudau
• [PATCH v3 2/3] arm64: Extend the PCI I/O space to 16MB   Liviu Dudau
• [PATCH v3 3/3] arm64: Add architecture support for PCI   Liviu Dudau
• [PATCH v3 5/5] pci: Add support for creating a generic host_bridge from device tree   Liviu Dudau
• [BUG] FL1009: xHCI host not responding to stop endpoint command.   Arnaud Ebalard
• [BUG] FL1009: xHCI host not responding to stop endpoint command.   Arnaud Ebalard
• Freescale FEC packet loss   Christian Ege
• [PATCH] clk: bcm281xx: don't disable unused peripheral clocks   Alex Elder
• [PATCH v2 1/3] clk: bcm281xx: add initial clock framework support   Alex Elder
• [PATCH v2 2/3] clk: bcm281xx: don't disable unused peripheral clocks   Alex Elder
• [PATCH v2 3/3] ARM: dts: bcm281xx: define real clocks   Alex Elder
• [PATCH] ARM: dts: remove bcm11351-brt.dts   Alex Elder
• [PATCH 00/12] clk: bcm281xx: updates for 3.14   Alex Elder
• [PATCH 01/12] clk: bcm281xx: warn if ccu_wait_bit() fails   Alex Elder
• [PATCH 02/12] clk: bcm281xx: use init_data.name for clock name   Alex Elder
• [PATCH 03/12] clk: bcm281xx: change some symbol names   Alex Elder
• [PATCH 04/12] mach-bcm: bcm281xx: more symbol cleanup   Alex Elder
• [PATCH 05/12] clk: bcm281xx: initialize CCU structures statically   Alex Elder
• [PATCH 06/12] clk: bcm281xx: define CCU clock data statically   Alex Elder
• [PATCH 07/12] clk: bcm281xx: add clock policy support   Alex Elder
• [PATCH 08/12] clk: bcm281xx: add clock hysteresis support   Alex Elder
• [PATCH 09/12] clk: bcm281xx: add an initialized flag   Alex Elder
• [PATCH 10/12] clk: bcm281xx: implement prerequisite clocks   Alex Elder
• [PATCH 11/12] clk: bcm281xx: add bus clock support   Alex Elder
• [PATCH 12/12] clk: bcm281xx: define a bus clock   Alex Elder
• [PATCH RESEND AGAIN] clk: support hardware-specific debugfs entries   Alex Elder
• [PATCH] mach-bcm: bcm281xx: symbol cleanup   Alex Elder
• [PATCH v2 00/12] clk: bcm281xx: updates for 3.15   Alex Elder
• [PATCH v2 01/12] clk: bcm281xx: warn if ccu_wait_bit() fails   Alex Elder
• [PATCH v2 02/12] clk: bcm281xx: use init_data.name for clock name   Alex Elder
• [PATCH v2 03/12] clk: bcm281xx: change some symbol names   Alex Elder
• [PATCH v2 04/12] clk: bcm281xx: initialize CCU structures statically   Alex Elder
• [PATCH v2 05/12] clk: bcm281xx: define CCU clock data statically   Alex Elder
• [PATCH v2 06/12] clk: bcm281xx: add clock policy support   Alex Elder
• [PATCH v2 07/12] clk: bcm281xx: add clock hysteresis support   Alex Elder
• [PATCH v2 08/12] clk: bcm281xx: add an initialized flag   Alex Elder
• [PATCH v2 09/12] clk: bcm281xx: implement prerequisite clocks   Alex Elder
• [PATCH v2 10/12] clk: bcm281xx: add bus clock support   Alex Elder
• [PATCH v2 11/12] clk: bcm281xx: define a bus clock   Alex Elder
• [PATCH v2 12/12] ARM: dts: add bus clock bsc3_apb for bcm281xx   Alex Elder
• [PATCH 0/5] clk: bcm21664: add common clock support   Alex Elder
• [PATCH 1/5] clk: bcm281xx: move compatible string definitions   Alex Elder
• [PATCH 2/5] ARM: dts: revise kona clock binding document   Alex Elder
• [PATCH 3/5] ARM: dts: define clock binding for bcm21664   Alex Elder
• [PATCH 4/5] clk: bcm21664: use common clock framework   Alex Elder
• [PATCH 5/5] ARM: dts: use real clocks for bcm21664   Alex Elder
• [PATCH v2 1/1] audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL   Michael Ellerman
• [PATCH] power: reset: msm - switch Kconfig to ARCH_QCOM depends   Dmitry Eremin-Solenikov
• [PATCH] ARM: pxa: add gpio keys information   Dmitry Eremin-Solenikov
• [PATCH 1/2] ARM: dts: mx53: Remove 'enable-active-low' property   Fabio Estevam
• [PATCH 2/2] ARM: dts: imx28-tx28: Remove 'enable-active-low' property   Fabio Estevam
• [PATCH 1/3] Phytec phyFLEX-i.MX6 : Added USB_HOST Support   Fabio Estevam
• [PATCH 14/17] i2c: nomadik: Fixup deployment of runtime PM   Fabio Estevam
• [PATCH v3 1/2] ARM: dts: imx6sl-evk: Add PFUZE100 support   Fabio Estevam
• [PATCH v3 2/2] ARM: dts: imx6sl-evk: Add audio support   Fabio Estevam
• [PATCH v2] ARM: dts: imx6qdl-sabreauto: Add PFUZE100 support   Fabio Estevam
• [PATCH] ARM: dts: imx6sl-evk: Add debug LED support   Fabio Estevam
• [PATCH] ARM: dts: imx6qdl-sabresd: Do not place regulator nodes under simple-bus   Fabio Estevam
• [PATCH RFC v2 00/35] Second preview of imx-drm cleanup series   Fabio Estevam
• [PATCH] ARM: imx6: fix !CONFIG_PM and !CONFIG_CPU_IDLE build   Fabio Estevam
• [PATCH] ARM: dts: imx6qdl-sabresd: Do not place regulator nodes under simple-bus   Fabio Estevam
• [PATCH] ARM: imx_v6_v7_defconfig: Select imx thermal and cpufreq   Fabio Estevam
• [PATCH 1/2] ARM: dts: imx6qdl-sabresd: Add hog entry for GPIO4_10   Fabio Estevam
• [PATCH 2/2] ARM: dts: imx6qdl-sabresd: Provide min/max voltages for codec regulator   Fabio Estevam
• [PATCH 1/2] ARM: dts: imx6qdl-sabresd: Add hog entry for GPIO4_10   Fabio Estevam
• [PATCH] ARM: mach-imx: Select CONFIG_SRAM at ARCH_MXC level   Fabio Estevam
• [PATCH] ARM: imx_v6_v7_defconfig: Select CONFIG_DEBUG_FS   Fabio Estevam
• PMIC driver prevents gpio-leds to work   Fabio Estevam
• PMIC driver prevents gpio-leds to work   Fabio Estevam
• [PATCH] ARM: dts: imx6sl-evk: Keep VGEN1 regulator always enabled   Fabio Estevam
• [PATCH v2] ARM: dts: imx6sl-evk: Keep VGEN1 regulator always enabled   Fabio Estevam
• PMIC driver prevents gpio-leds to work   Fabio Estevam
• [RFC PATCH 2/2] ARM: imx6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority   Fabio Estevam
• [PATCH 1/3] mfd: fsl imx25 Touchscreen ADC driver   Fabio Estevam
• [PATCH] ARM: mach-imx: Kconfig: Remove IMX_HAVE_PLATFORM_IMX2_WDT from SOC_IMX53   Fabio Estevam
• [PATCH v2] ARM: mach-imx: Kconfig: Remove IMX_HAVE_PLATFORM_IMX2_WDT from SOC_IMX53   Fabio Estevam
• [PATCH v3 0/2] regulator: core: Fix ops->enable/disable usage   Fabio Estevam
• [PATCH v3 0/2] regulator: core: Fix ops->enable/disable usage   Fabio Estevam
• [RFC PATCH v4 4/8] staging: imx-drm: Document imx-hdmi device tree bindings   Fabio Estevam
• [RFC PATCH v4 4/8] staging: imx-drm: Document imx-hdmi device tree bindings   Fabio Estevam
• [PATCH] ARM: dts: imx6qdl-sabresd: Add HDMI support   Fabio Estevam
• [PATCH] ARM: dts: imx6qdl-sabresd: Add HDMI support   Fabio Estevam
• [PATCH v0 00/15] clk: st: Add new driver   Gabriel FERNANDEZ
• [PATCH v0 01/15] drivers: clk: st: Support for DIVMUX and PreDiv Clocks   Gabriel FERNANDEZ
• [PATCH v0 02/15] drivers: clk: st: Support for PLLs inside ClockGenA(s)   Gabriel FERNANDEZ
• [PATCH v0 03/15] drivers: clk: st: Support for VCC-mux and MUX clocks   Gabriel FERNANDEZ
• [PATCH v0 04/15] drivers: clk: st: Support for QUADFS inside ClockGenB/C/D/E/F   Gabriel FERNANDEZ
• [PATCH v0 05/15] drivers: clk: st: Support for ClockGenA9/DDR/GPU   Gabriel FERNANDEZ
• [PATCH v0 06/15] drivers: clk: st: Support for A9 MUX clocks   Gabriel FERNANDEZ
• [PATCH v0 07/15] clk: st: Adds divmux and prediv clock binding   Gabriel FERNANDEZ
• [PATCH v0 08/15] clk: st: Adds clockgen clock binding   Gabriel FERNANDEZ
• [PATCH v0 09/15] clk: st: Adds clockgen-vcc and clockgen-mux clock binding   Gabriel FERNANDEZ
• [PATCH v0 10/15] clk: st: Adds quadfs clock binding   Gabriel FERNANDEZ
• [PATCH v0 11/15] ARM: STi: DT: STiH416: 416 DT Entry for clockgen A0/1/10/11/12   Gabriel FERNANDEZ
• [PATCH v0 12/15] ARM: STi: DT: STiH416: 416 DT Entry for clockgen B/C/D/E/F   Gabriel FERNANDEZ
• [PATCH v0 13/15] ARM: STi: DT: STiH416: 416 DT Entry for clockgen A9/DDR/GPU   Gabriel FERNANDEZ
• [PATCH v0 14/15] ARM: STi: DT: STiH415: 415 DT Entry for clockgen A0/1/10/11/12   Gabriel FERNANDEZ
• [PATCH v0 15/15] ARM: STi: DT: STiH415: 415 DT Entry for clockgen A9   Gabriel FERNANDEZ
• [PATCH v2 0/5] net: phy: Ethernet PHY powerdown optimization   Florian Fainelli
• ohci-/ehci-platform: Change compatible string to ?hci-platform   Florian Fainelli
• [PATCH v8 0/4] ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU   Florian Fainelli
• [PATCH v6 0/8] ARM: brcmstb: Add Broadcom STB SoC support   Florian Fainelli
• [PATCH] net: phy: add suspend_halted module param   Florian Fainelli
• [PATCH] net: phy: add suspend_halted module param   Florian Fainelli
• [PATCH v2] arm: fix memset-related crashes caused by recent GCC (4.7.2) optimizations   Florian Fainelli
• [PATCH] net: phy: add suspend_halted module param   Florian Fainelli
• [PATCH] net: phy: add suspend_halted module param   Florian Fainelli
• pci-mvebu driver on km_kirkwood   Gerlando Falauto
• pci-mvebu driver on km_kirkwood   Gerlando Falauto
• pci-mvebu driver on km_kirkwood   Gerlando Falauto
• pci-mvebu driver on km_kirkwood   Gerlando Falauto
• pci-mvebu driver on km_kirkwood   Gerlando Falauto
• pci-mvebu driver on km_kirkwood   Gerlando Falauto
• pci-mvebu driver on km_kirkwood   Gerlando Falauto
• pci-mvebu driver on km_kirkwood   Gerlando Falauto
• [PATCH v2 0/2] Introduce omap-des driver for OMAP SoCs   Joel Fernandes
• [PATCH v2 1/2] crypto: omap-des: Add omap-des driver for OMAP4/AM43xx   Joel Fernandes
• [PATCH v2 2/2] crypto: omap-des: Add config and build options   Joel Fernandes
• [PATCH] ARM: EDMA: Use platform_get_resource functions for DT   Joel Fernandes
• [PATCH] ARM: EDMA: Use platform_get_resource functions for DT   Joel Fernandes
• Ideas/suggestions to avoid repeated locking and reducing too many lists with dmaengine?   Joel Fernandes
• Ideas/suggestions to avoid repeated locking and reducing too many lists with dmaengine?   Joel Fernandes
• Ideas/suggestions to avoid repeated locking and reducing too many lists with dmaengine?   Joel Fernandes
• [PATCH] ARM: EDMA: Use platform_get_resource functions for DT   Joel Fernandes
• [PATCH v2] at91: pmc: Fixed irq's name allocation for programmable clocks   Nicolas Ferre
• [PATCH 1/3] clk: at91: fix programmable clk irq handling   Nicolas Ferre
• [PATCH 2/3] clk: at91: replace prog clk round_rate with determine_rate   Nicolas Ferre
• [PATCH 3/3] clk: at91: propagate rate change on system clks   Nicolas Ferre
• [PATCH] ARM: at91: add Atmel's SAMA5D3 Xplained board   Nicolas Ferre
• [PATCH v2] ARM: at91: add Atmel's SAMA5D3 Xplained board   Nicolas Ferre
• [PATCH] clk: at91: remove redundant assignment   Nicolas Ferre
• [PATCH v3 06/15] at91: dt: at91sam9261ek: Adds DT entries for the 4 user buttons   Nicolas Ferre
• [PATCH v2] ARM: at91: add Atmel's SAMA5D3 Xplained board   Nicolas Ferre
• [PATCH] ARM: at91/dt: fix sama5d3 ohci hclk clock reference   Nicolas Ferre
• [PATCH] at91: dt: sam9263: fixed compatibility string for the I2C   Nicolas Ferre
• [PATCH] ARM: at91: enable USB host on at91sam9n12ek board   Nicolas Ferre
• [GIT PULL] at91: fixes for 3.14 #1   Nicolas Ferre
• [PATCH v2] ARM: at91: add Atmel's SAMA5D3 Xplained board   Nicolas Ferre
• [PATCH v3 2/2] Binding: atmel-ssc: add option to choose clock   Nicolas Ferre
• [PATCH v3 1/2] ASoC: atmel_ssc_dai: make option to choose clock   Nicolas Ferre
• [PATCH 5/8] tty/serial: at91: add dtr control via gpio   Nicolas Ferre
• [GIT PULL] at91: fixes for 3.14 #1   Nicolas Ferre
• [PATCH 3/8] ARM: at91: make use of of_find_matching_node_and_match   Nicolas Ferre
• [PATCH v4 1/8] at91: dt: Adds support for the bus matrix declaration in the DT   Nicolas Ferre
• [PATCH] ARM: at91/DT: add NAND + DMA property   Nicolas Ferre
• [PATCH] MTD: atmel_nand: POI fall back is not an issue: change log level   Nicolas Ferre
• [PATCH RESEND] usb: at91-udc: fix irq and iomem resource retrieval   Nicolas Ferre
• [PATCH v4 2/8] at91: pinctrl: don't request GPIOs used for interrupts but lock them as IRQ   Nicolas Ferre
• [PATCH v4 3/8] at91: dt: Add at91sam9261 dt SoC support   Nicolas Ferre
• [PATCH 0/3] arm: at91: update defconfigs   Nicolas Ferre
• [PATCH 3/3] ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek   Nicolas Ferre
• [PATCH 1/3] ARM: at91: Add at91sam9rl DT SoC support   Nicolas Ferre
• [PATCH 1/3] ARM: at91: Add at91sam9rl DT SoC support   Nicolas Ferre
• [PATCH v2 1/2] USB: at91: fix the number of endpoint parameter   Nicolas Ferre
• [PATCH v2 2/2] USB: at91: using USBA_NR_DMAS for DMA channels   Nicolas Ferre
• [PATCHv2 1/8] ARM: at91: Add at91sam9rl DT SoC support   Nicolas Ferre
• [PATCHv2 1/8] ARM: at91: Add at91sam9rl DT SoC support   Nicolas Ferre
• [PATCH] usb: gadget: atmel_usba: fix crash when no endpoint are specified   Nicolas Ferre
• [PATCH] Doc: USB: gadget: atmel_usba correct atmel,vbus-gpio meaning   Nicolas Ferre
• [PATCH 0/9] Samsung clock PM consolidation part 1   Tomasz Figa
• [PATCH V2 2/3] ARM: dts: add dts files for exynos5260 SoC   Tomasz Figa
• [PATCH 1/2 v3] i2c: exynos5: add support for HSI2C on Exynos5260 SoC   Tomasz Figa
• [PATCH 1/2 v3] i2c: exynos5: add support for HSI2C on Exynos5260 SoC   Tomasz Figa
• [PATCH v2 0/9] Samsung PM consolidation part 1 (clocks)   Tomasz Figa
• [PATCH v2 1/9] clk: exynos4: Remove remnants of non-DT support   Tomasz Figa
• [PATCH v2 2/9] clk: samsung: Provide common helpers for register save/restore   Tomasz Figa
• [PATCH v2 3/9] clk: samsung: exynos4: Move suspend/resume handling to SoC driver   Tomasz Figa
• [PATCH v2 4/9] clk: samsung: exynos5250: Move suspend/resume handling to SoC driver   Tomasz Figa
• [PATCH v2 5/9] clk: samsung: exynos5420: Move suspend/resume handling to SoC driver   Tomasz Figa
• [PATCH v2 6/9] clk: samsung: s3c64xx: Move suspend/resume handling to SoC driver   Tomasz Figa
• [PATCH v2 7/9] clk: samsung: Drop old suspend/resume code   Tomasz Figa
• [PATCH v2 8/9] clk: samsung: exynos4: Add remaining suspend/resume handling   Tomasz Figa
• [PATCH v2 9/9] ARM: EXYNOS: pm: Drop legacy Exynos4 clock suspend/resume code   Tomasz Figa
• [PATCH] clk: samsung: Initialize clock table with error pointers   Tomasz Figa
• [PATCH v2 00/12] Samsung PM consolidation part 2 (multiplatform)   Tomasz Figa
• [PATCH v2 01/12] ARM: EXYNOS: Do not resume l2x0 if not enabled before suspend   Tomasz Figa
• [PATCH v2 02/12] ARM: SAMSUNG: Add soc_is_s3c2410() helper   Tomasz Figa
• [PATCH v2 03/12] ARM: SAMSUNG: pm: Save UART DIVSLOT register based on SoC type   Tomasz Figa
• [PATCH v2 04/12] ARM: SAMSUNG: pm: Use debug_ll_addr() to get UART base address   Tomasz Figa
• [PATCH v2 05/12] ARM: SAMSUNG: pm: Consolidate PM debug functions   Tomasz Figa
• [PATCH v2 06/12] ARM: SAMSUNG: pm: Move Samsung PM debug code into separate file   Tomasz Figa
• [PATCH v2 07/12] ARM: SAMSUNG: Move common save/restore helpers to separate file   Tomasz Figa
• [PATCH v2 08/12] ARM: SAMSUNG: pm: Move s3c_pm_check_* prototypes to plat/pm-common.h   Tomasz Figa
• [PATCH v2 09/12] ARM: EXYNOS: Kconfig: Fix abuse of CONFIG_PM   Tomasz Figa
• [PATCH v2 10/12] ARM: EXYNOS: Remove PM initcalls and useless indirection   Tomasz Figa
• [PATCH v2 11/12] ARM: EXYNOS: Stop using legacy Samsung PM code   Tomasz Figa
• [PATCH v2 12/12] ARM: exynos: Allow wake-up using GIC interrupts   Tomasz Figa
• [PATCH 0/6] mmc: sdhci-s3c: Fix base clock source management   Tomasz Figa
• [PATCH 1/2 v3] i2c: exynos5: add support for HSI2C on Exynos5260 SoC   Tomasz Figa
• [PATCH v2 00/12] Samsung PM consolidation part 2 (multiplatform)   Tomasz Figa
• [PATCH v2 00/12] Samsung PM consolidation part 2 (multiplatform)   Tomasz Figa
• [PATCH 01/12] ARM: S3C24XX: cpufreq-utils: don't write raw values to MPLLCON when using ccf   Tomasz Figa
• [PATCH 02/12] dt-bindings: document s3c24xx controller for external clock output   Tomasz Figa
• [PATCH 03/12] clk: samsung: add clock driver for external clock outputs   Tomasz Figa
• [PATCH 08/12] clk: samsung: add clock controller driver for s3c2410, s3c2440 and s3c2442   Tomasz Figa
• [PATCH 00/12] ARM: S3C24XX: convert s3c2410, s3c2440 s3c2442 to common clock framework   Tomasz Figa
• [PATCH V2 2/3] ARM: dts: add dts files for exynos5260 SoC   Tomasz Figa
• [PATCH v2 1/5] drivers: of: add initialization code for reserved memory   Tomasz Figa
• [PATCH] ARM: dts: exynos5250-arndale: Keep G3D regulator always on   Tomasz Figa
• [PATCH v2 00/12] Samsung PM consolidation part 2 (multiplatform)   Tomasz Figa
• [PATCH v2 1/5] drivers: of: add initialization code for reserved memory   Tomasz Figa
• [PATCH v2 1/5] drivers: of: add initialization code for reserved memory   Tomasz Figa
• [PATCH] ARM: mm: cache-l2x0: Check for status property of DT node   Tomasz Figa
• [PATCH v3 1/7] cpufreq: cpufreq-cpu0: allow use of optional boost mode frequencies   Tomasz Figa
• [PATCH v3 2/7] clk: samsung: add infrastructure to register cpu clocks   Tomasz Figa
• [PATCH 1/3] mmc: add support for power-on sequencing through DT   Tomasz Figa
• [PATCH v2 4/6] ARM: firmware: add prepare_idle() operation   Tomasz Figa
• [PATCH v3 1/7] cpufreq: cpufreq-cpu0: allow use of optional boost mode frequencies   Tomasz Figa
• [PATCH v1 0/2] exynos_mct driver: fix irq allocation and cleanup   Tomasz Figa
• [PATCH v3 2/7] clk: samsung: add infrastructure to register cpu clocks   Tomasz Figa
• [PATCH RESEND v2 00/12] clk/exynos convert clock IDs to macros   Tomasz Figa
• [PATCH v2 4/6] ARM: firmware: add prepare_idle() operation   Tomasz Figa
• [PATCH V2 2/3] ARM: dts: add dts files for exynos5260 SoC   Tomasz Figa
• [PATCH v3 3/3] ARM: dts: add dts files for xyref5260 board   Tomasz Figa
• [PATCH v3 1/3] ARM: EXYNOS: initial board support for exynos5260 SoC   Tomasz Figa
• [PATCH v3 2/3] ARM: dts: add dts files for exynos5260 SoC   Tomasz Figa
• [PATCH 1/3] mmc: add support for power-on sequencing through DT   Tomasz Figa
• [PATCH 1/3] mmc: add support for power-on sequencing through DT   Tomasz Figa
• [PATCH 02/12] dt-bindings: document s3c24xx controller for external clock output   Tomasz Figa
• [PATCH 08/12] clk: samsung: add clock controller driver for s3c2410, s3c2440 and s3c2442   Tomasz Figa
• [PATCH 1/1] ARM: Exynos: Add generic compatible string   Tomasz Figa
• [PATCH v4 1/7] Documentation: Add device tree bindings for Freescale i.MX GPC   Tomasz Figa
• [PATCH v3 15/15] mfd: max14577: Add device tree bindings document   Tomasz Figa
• [PATCH v3 15/15] mfd: max14577: Add device tree bindings document   Tomasz Figa
• [PATCH 1/1] ARM: Exynos: Add generic compatible string   Tomasz Figa
• [PATCH 1/1] ARM: Exynos: Add generic compatible string   Tomasz Figa
• [PATCH RFC 0/5] Hybrid approach for DT schema checking   Tomasz Figa
• [PATCH RFC 1/5] dtc: Add helpers for various message levels   Tomasz Figa
• [PATCH RFC 2/5] dtc: livetree: Add more tree parsing helpers   Tomasz Figa
• [PATCH RFC 3/5] Implement DT schema checker using hybrid approach   Tomasz Figa
• [PATCH RFC 4/5] Add sample C-based generic bindings   Tomasz Figa
• [PATCH RFC 5/5] Add sample DTS and DTSS schema   Tomasz Figa
• [PATCH 0/6] mmc: sdhci-s3c: Fix base clock source management   Tomasz Figa
• [PATCH v2 00/12] Samsung PM consolidation part 2 (multiplatform)   Tomasz Figa
• [PATCH 1/1] ARM: Exynos: Add generic compatible string   Tomasz Figa
• [PATCH 1/1] ARM: Exynos: Add generic compatible string   Tomasz Figa
• [PATCH 1/1] ARM: Exynos: Add generic compatible string   Tomasz Figa
• [PATCH v4 03/10] Documentation: devicetree: Update Samsung FIMC DT binding   Tomasz Figa
• [PATCH v2 0/5] ARM: S3C24XX: convert s3c2412 to common clock framework   Tomasz Figa
• [PATCH v2 0/5] ARM: S3C24XX: convert s3c2412 to common clock framework   Tomasz Figa
• [PATCH v3 4/5] clk/exynos5260: add macros and documentation for exynos5260   Tomasz Figa
• [PATCH v3 5/5] clk/exynos5260: add clock file for exynos5260   Tomasz Figa
• [PATCH RFC 04/10] base: power: Add generic OF-based power domain look-up   Tomasz Figa
• [PATCH v2] clk: respect the clock dependencies in of_clk_init   Tomasz Figa
• [PATCH] clk: Correct handling of NULL clk in __clk_{get, put}   Tomasz Figa
• [PATCH 1/1] ARM: Exynos: Add generic compatible string   Tomasz Figa
• [PATCH] clk: Correct handling of NULL clk in __clk_{get, put}   Tomasz Figa
• [PATCH v5 01/11] of: document bindings for reserved-memory nodes   Tomasz Figa
• [PATCH 0/9] Doc/DT: DT bindings for various display components   Tomasz Figa
• [PATCH 03/22] efi: add helper function to get UEFI params from FDT   Matt Fleming
• [PATCH 06/22] Add helper functions used by arm/arm64   Matt Fleming
• [PATCH v7 5/9] ARM: Enable erratum 798181 for Broadcom Brahma-B15   Gregory Fong
• [PATCH 06/22] Add helper functions used by arm/arm64   Roy Franz
• [PATCH v3 0/4] ARM: add omap3 INCOstartec board support   Christoph Fritz
• [PATCH v4 0/4]   Christoph Fritz
• [PATCH v4 1/4] ARM: dts: omap3: Add support for INCOstartec a83x module   Christoph Fritz
• [PATCH v4 2/4] ARM: dts: omap3: Add support for INCOstartec DBB056 baseboard   Christoph Fritz
• [PATCH v4 3/4] ARM: OMAP2+: add legacy display for omap3 DBB056   Christoph Fritz
• [PATCH v4 4/4] ARM: OMAP2+: Add pdata quirk for sys_clkout2 for omap3 DBB056   Christoph Fritz
• [PATCH v3 1/2] spi:fsl-dspi:convert to use regmap and big-endian supports   Chao Fu
• [PATCH v3 2/2] spi:dspi:Remove some coding sytle not in standard   Chao Fu
• [PATCH v4 1/2] spi:fsl-dspi:convert to use regmap and big-endian supports   Chao Fu
• [PATCH v4 2/2] spi:dspi:Remove some coding sytle not in standard   Chao Fu
• [PATCH 1/3] Documentation:spi:fsl-dspi:add DSPI dma transfer support   Chao Fu
• [PATCH 2/3] arm:dts:vf-610:add vybrid DSPI DMA transfer support   Chao Fu
• [PATCH 3/3] spi:fsl-dspi:add dspi dma transfer support   Chao Fu
• [PATCH] reset: Add generic GPIO reset driver.   Martin Fuzzey
• [PATCH] reset: Add generic GPIO reset driver.   Fuzzey, Martin
• [PATCH] pinctrl: imx: Fix pin name in debug message.   Martin Fuzzey
• [RFC PATCH] ARM: Enable imprecise external aborts earlier   Fabrice GASNIER
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Fabrice GASNIER
• [PATCH v2] ARM: Add imprecise abort enable/disable macro   Fabrice GASNIER
• [PATCH v2] ARM: Add imprecise abort enable/disable macro   Fabrice GASNIER
• [PATCH] arm64: fix psci power state pack   Prashant Gaikwad
• [PATCH] arm64: fix psci power state pack   Prashant Gaikwad
• [PATCH v2 0/5] Split mach-msm into legacy and mach-qcom (multiplatform)   Kumar Gala
• [PATCH 1/5] ARM: msm: kill off hotplug.c   Kumar Gala
• [PATCH 2/5] clocksource: qcom: Move clocksource code out of mach-msm   Kumar Gala
• [PATCH 3/5] arm: qcom: Split Qualcomm support into legacy and multiplatform   Kumar Gala
• [PATCH v2 0/5] Split mach-msm into legacy and mach-qcom (multiplatform)   Kumar Gala
• [PATCH v2 1/5] ARM: msm: kill off hotplug.c   Kumar Gala
• [PATCH v2 2/5] clocksource: qcom: Move clocksource code out of mach-msm   Kumar Gala
• [PATCH v2 3/5] arm: qcom: Split Qualcomm support into legacy and multiplatform   Kumar Gala
• [PATCH v2 4/5] clocksource: qcom: split building of legacy vs multiplatform support   Kumar Gala
• [PATCH v2 5/5] ARM: qcom: Rename various msm prefixed functions to qcom   Kumar Gala
• [PATCH v2 1/5] ARM: msm: kill off hotplug.c   Kumar Gala
• [PATCH v2 2/5] clocksource: qcom: Move clocksource code out of mach-msm   Kumar Gala
• [PATCH v2 0/5] Split mach-msm into legacy and mach-qcom (multiplatform)   Kumar Gala
• [PATCH v3 0/5] Split mach-msm into legacy and mach-qcom (multiplatform)   Kumar Gala
• [PATCH v3 1/5] ARM: msm: kill off hotplug.c   Kumar Gala
• [PATCH v3 2/5] clocksource: qcom: Move clocksource code out of mach-msm   Kumar Gala
• [PATCH v3 3/5] ARM: qcom: Split Qualcomm support into legacy and multiplatform   Kumar Gala
• [PATCH v3 4/5] clocksource: qcom: split building of legacy vs multiplatform support   Kumar Gala
• [PATCH v3 5/5] ARM: qcom: Rename various msm prefixed functions to qcom   Kumar Gala
• [GIT PULL] qcom cleanups for v3.15   Kumar Gala
• [PATCH 2/5] clocksource: qcom: Move clocksource code out of mach-msm   Kumar Gala
• [PATCH 1/2] ohci-platform: Change compatible string from usb-ohci to ohci-platform   Kumar Gala
• [PATCH v3 3/5] ARM: qcom: Split Qualcomm support into legacy and multiplatform   Kumar Gala
• [PATCH 1/2] ohci-platform: Change compatible string from usb-ohci to ohci-platform   Kumar Gala
• [PATCH] hwrng: msm: switch Kconfig to ARCH_QCOM depends   Kumar Gala
• [PATCH] drm/msm: drop ARCH_MSM Kconfig depend   Kumar Gala
• [PATCH] power: reset: msm - switch Kconfig to ARCH_QCOM depends   Kumar Gala
• [PATCH] gpio: msm: switch Kconfig to ARCH_QCOM depends   Kumar Gala
• [Patch v5 2/2] dmaengine: qcom_bam_dma: Add device tree binding   Kumar Gala
• [GIT PULL] qcom SoC changes for v3.15   Kumar Gala
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Kumar Gala
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Kumar Gala
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Kumar Gala
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Kumar Gala
• [GIT PULL] qcom SoC changes for v3.15   Kumar Gala
• [PATCH] gpio: msm: switch Kconfig to ARCH_QCOM depends   Kumar Gala
• [GIT PULL] qcom cleanups for v3.15   Kumar Gala
• [GIT PULL] qcom cleanups for v3.15   Kumar Gala
• [GIT PULL] qcom cleanups for v3.15   Kumar Gala
• [PATCH] ARM: qcom: Copyright marking changes   Kumar Gala
• [PATCH v2] hwrng: msm: switch Kconfig to ARCH_QCOM depends   Kumar Gala
• [GIT PULL] qcom DT changes for v3.15   Kumar Gala
• [PATCH RESEND] ARM: dts: qcom-msm8974: Add RNG device tree node   Kumar Gala
• [PATCH RESEND] ARM: dts: qcom-msm8960-cdp: Add RNG device tree node   Kumar Gala
• [PATCH v2] hwrng: msm: switch Kconfig to ARCH_QCOM depends   Kumar Gala
• [PATCH v3] hwrng: msm: switch Kconfig to ARCH_QCOM depends   Kumar Gala
• [PATCH] gpio: msm: switch Kconfig to ARCH_QCOM depends   Kumar Gala
• [PATCH v3 2/2] i2c: New bus driver for the Qualcomm QUP I2C controller   Kumar Gala
• [GIT PULL] qcom driver changes for v3.15   Kumar Gala
• [GIT PULL] qcom driver changes for v3.15   Kumar Gala
• [PATCH] ARM: qcom: Enable basic support for Qualcomm platforms in multi_v7_defconfig   Kumar Gala
• [PATCH v5 2/4] devicetree: bindings: Document Krait CPU/L1 EDAC   Kumar Gala
• [PATCH 2/4] arm: qcom: Split Qualcomm support into legacy and multiplatform   Kumar Gala
• linux-next: manual merge of the crypto tree with the arm-soc tree   Kumar Gala
• [PATCH] ARM: qcom: Enable basic support for Qualcomm platforms in multi_v7_defconfig   Kumar Gala
• [PATCH 3/3] ARM: config: Update msm_defconfig   Kumar Gala
• [RFC PATCH v2 03/14] of: mtd: add documentation for nand-ecc-level property   Ezequiel Garcia
• [PATCH v5 02/20] clocksource: orion: Use atomic access for shared registers   Ezequiel Garcia
• [PATCH v2 0/5] net: phy: Ethernet PHY powerdown optimization   Ezequiel Garcia
• [PATCH 0/4] clk: mvebu: fix clk init order   Ezequiel Garcia
• [PATCH 0/3] irqchip: orion: bridge irq fixes for v3.14-rc1   Ezequiel Garcia
• [PATCH v6 00/19] Armada 370/XP watchdog   Ezequiel Garcia
• [PATCH v6 01/19] clocksource: orion: Use atomic access for shared registers   Ezequiel Garcia
• [PATCH v6 02/19] watchdog: orion: Add clock error handling   Ezequiel Garcia
• [PATCH v6 03/19] watchdog: orion: Use atomic access for shared registers   Ezequiel Garcia
• [PATCH v6 04/19] watchdog: orion: Remove unused macros   Ezequiel Garcia
• [PATCH v6 05/19] watchdog: orion: Make sure the watchdog is initially stopped   Ezequiel Garcia
• [PATCH v6 06/19] watchdog: orion: Handle the interrupt so it's properly acked   Ezequiel Garcia
• [PATCH v6 07/19] watchdog: orion: Make RSTOUT register a separate resource   Ezequiel Garcia
• [PATCH v6 08/19] watchdog: orion: Remove unneeded BRIDGE_CAUSE clear   Ezequiel Garcia
• [PATCH v6 09/19] watchdog: orion: Introduce an orion_watchdog device structure   Ezequiel Garcia
• [PATCH v6 10/19] watchdog: orion: Introduce per-compatible of_device_id data   Ezequiel Garcia
• [PATCH v6 11/19] watchdog: orion: Add per-compatible clock initialization   Ezequiel Garcia
• [PATCH v6 12/19] watchdog: orion: Add per-compatible watchdog start implementation   Ezequiel Garcia
• [PATCH v6 13/19] watchdog: orion: Add support for Armada 370 and Armada XP SoC   Ezequiel Garcia
• [PATCH v6 14/19] ARM: mvebu: Enable Armada 370/XP watchdog in the devicetree   Ezequiel Garcia
• [PATCH v6 15/19] ARM: kirkwood: Add RSTOUT 'reg' entry to devicetree   Ezequiel Garcia
• [PATCH v6 16/19] ARM: dove: Enable Dove watchdog in the devicetree   Ezequiel Garcia
• [PATCH v6 17/19] watchdog: orion: Enable the build on ARCH_MVEBU   Ezequiel Garcia
• [PATCH v6 18/19] ARM: mvebu: Enable watchdog support in defconfig   Ezequiel Garcia
• [PATCH v6 19/19] ARM: dove: Enable watchdog support in the defconfig   Ezequiel Garcia
• [PATCH v6 18/19] ARM: mvebu: Enable watchdog support in defconfig   Ezequiel Garcia
• [PATCH v6 05/19] watchdog: orion: Make sure the watchdog is initially stopped   Ezequiel Garcia
• [PATCH] clk: respect the clock dependencies in of_clk_init   Ezequiel Garcia
• [PATCH v6 05/19] watchdog: orion: Make sure the watchdog is initially stopped   Ezequiel Garcia
• [PATCH v6 05/19] watchdog: orion: Make sure the watchdog is initially stopped   Ezequiel Garcia
• [PATCH v6 05/19] watchdog: orion: Make sure the watchdog is initially stopped   Ezequiel Garcia
• [PATCH 0/2] Marvell Armada 375 and 38x timer support   Ezequiel Garcia
• [PATCH 1/2] clocksource: armada-370-xp: Add support for Armada 375   Ezequiel Garcia
• [PATCH 2/2] clocksource: armada-370-xp: Add support for Armada 38x   Ezequiel Garcia
• [PATCH 0/2] Armada 375/38x MBus support   Ezequiel Garcia
• [PATCH 1/2] bus: mvebu-mbus: Add support for the Armada 375 SoCs   Ezequiel Garcia
• [PATCH 2/2] bus: mvebu: Add support for the Armada 38x SoCs   Ezequiel Garcia
• [PATCH 0/2] irqchip: Armada 370/XP MPIC as a slave controller   Ezequiel Garcia
• [PATCH 1/2] irqchip: armada-370-xp: Add helper for the MSI IRQ handling   Ezequiel Garcia
• [PATCH 2/2] irqchip: armada-370-xp: Setup a chained handler for the MPIC   Ezequiel Garcia
• [PATCH v7 00/18] Armada 370/XP watchdog   Ezequiel Garcia
• [PATCH v7 01/18] watchdog: orion: Add clock error handling   Ezequiel Garcia
• [PATCH v7 02/18] watchdog: orion: Use atomic access for shared registers   Ezequiel Garcia
• [PATCH v7 03/18] watchdog: orion: Remove unused macros   Ezequiel Garcia
• [PATCH v7 04/18] watchdog: orion: Make sure the watchdog is initially stopped   Ezequiel Garcia
• [PATCH v7 05/18] watchdog: orion: Handle the interrupt so it's properly acked   Ezequiel Garcia
• [PATCH v7 06/18] watchdog: orion: Make RSTOUT register a separate resource   Ezequiel Garcia
• [PATCH v7 07/18] watchdog: orion: Remove unneeded BRIDGE_CAUSE clear   Ezequiel Garcia
• [PATCH v7 08/18] watchdog: orion: Introduce an orion_watchdog device structure   Ezequiel Garcia
• [PATCH v7 09/18] watchdog: orion: Introduce per-compatible of_device_id data   Ezequiel Garcia
• [PATCH v7 10/18] watchdog: orion: Add per-compatible clock initialization   Ezequiel Garcia
• [PATCH v7 11/18] watchdog: orion: Add per-compatible watchdog start implementation   Ezequiel Garcia
• [PATCH v7 12/18] watchdog: orion: Add support for Armada 370 and Armada XP SoC   Ezequiel Garcia
• [PATCH v7 13/18] ARM: mvebu: Enable Armada 370/XP watchdog in the devicetree   Ezequiel Garcia
• [PATCH v7 14/18] ARM: kirkwood: Add RSTOUT 'reg' entry to devicetree   Ezequiel Garcia
• [PATCH v7 15/18] ARM: dove: Enable Dove watchdog in the devicetree   Ezequiel Garcia
• [PATCH v7 16/18] watchdog: orion: Enable the build on ARCH_MVEBU   Ezequiel Garcia
• [PATCH v7 17/18] ARM: mvebu: Enable watchdog support in defconfig   Ezequiel Garcia
• [PATCH v7 18/18] ARM: dove: Enable watchdog support in the defconfig   Ezequiel Garcia
• [PATCH v6 01/19] clocksource: orion: Use atomic access for shared registers   Ezequiel Garcia
• [PATCH v7 00/18] Armada 370/XP watchdog   Ezequiel Garcia
• [PATCH v6 01/19] clocksource: orion: Use atomic access for shared registers   Ezequiel Garcia
• [PATCH 0/2] Marvell Armada 375 and 38x timer support   Ezequiel Garcia
• [PATCH 0/2] Armada 375/38x MBus support   Ezequiel Garcia
• [PATCH 0/2] Marvell Armada 375 and 38x timer support   Ezequiel Garcia
• [PATCH 0/4] Core Divider support for Armada 375 SoC   Ezequiel Garcia
• [PATCH 1/4] clk: mvebu: do not copy the contents of clk_corediv_desc   Ezequiel Garcia
• [PATCH 2/4] clk: mvebu: add a little bit of documentation about data structures   Ezequiel Garcia
• [PATCH 3/4] clk: mvebu: refactor corediv driver to support more SoC   Ezequiel Garcia
• [PATCH 4/4] clk: mvebu: add Armada 375 support to the corediv clock driver   Ezequiel Garcia
• [PATCH v2 06/23] ARM: Kirkwood: ioremap the cpu_config register before using it.   Ezequiel Garcia
• [PATCH v2 04/23] ARM: Kirkwood: Drop printing the SoC type and revision   Ezequiel Garcia
• [PATCH v2 01/23] ARM: Kirkwood: Give pm.c its own header file.   Ezequiel Garcia
• [PATCH v2 07/23] ARM: Kirkwood: ioremap memory control register   Ezequiel Garcia
• [REGRESSION] 3.14-rc2 boot failure on Kirkwood (qnap ts-119p+)   Ezequiel Garcia
• [REGRESSION] 3.14-rc2 boot failure on Kirkwood (qnap ts-119p+)   Ezequiel Garcia
• [REGRESSION] 3.14-rc2 boot failure on Kirkwood (qnap ts-119p+)   Ezequiel Garcia
• [PATCH 0/4] clk: mvebu: fix clk init order   Ezequiel Garcia
• [v3.14-rc3 BUG] 1) panic and 2) SATA not working (Was Re: [PATCH] ATA: SATA_MV: Add missing Kconfig select statememnt)   Ezequiel Garcia
• [PATCH 0/4] clk: mvebu: fix clk init order   Ezequiel Garcia
• [PATCH 0/4] clk: mvebu: fix clk init order   Ezequiel Garcia
• [PATCH 0/2] irqchip: Armada 370/XP MPIC as a slave controller   Ezequiel Garcia
• [PATCH 0/4] clk: mvebu: fix clk init order   Ezequiel Garcia
• [RFC PATCH v2 03/14] of: mtd: add documentation for nand-ecc-level property   Ezequiel Garcia
• [PATCH 0/2] irqchip: Armada 370/XP MPIC as a slave controller   Ezequiel Garcia
• [PATCH v7 11/18] watchdog: orion: Add per-compatible watchdog start implementation   Ezequiel Garcia
• [PATCH] net: ethernet: remove unneeded dependency of mvneta and update help text   Ezequiel Garcia
• [PATCH] net: ethernet: remove unneeded dependency of mvneta and update help text   Ezequiel Garcia
• [PATCH v6 01/19] clocksource: orion: Use atomic access for shared registers   Ezequiel Garcia
• [PATCH 0/4] clk: mvebu: fix clk init order   Ezequiel Garcia
• [PATCH 0/2] Make Armada 370/XP and Orion clocksource use atomic I/O API   Ezequiel Garcia
• [PATCH 1/2] clocksource: orion: Use atomic access for shared registers   Ezequiel Garcia
• [PATCH 2/2] clocksource: armada-370-xp: Use atomic access for shared registers   Ezequiel Garcia
• [PATCH 0/2] Translate of PCI address without PCI enabled   Ezequiel Garcia
• [PATCH v2 00/23] Move DT kirkwood into mach-mvebu   Ezequiel Garcia
• [RFC/PATCH] ARM: mvebu: Rename the ARCH_MVEBU menu option   Ezequiel Garcia
• [RFC/PATCH v2] ARM: mvebu: Rename the ARCH_MVEBU menu option   Ezequiel Garcia
• [PATCH v2 22/23] ARM: config: Add mvebu_v5_defconfig   Ezequiel Garcia
• [PATCH v2 00/23] Move DT kirkwood into mach-mvebu   Ezequiel Garcia
• [PATCH v2 00/23] Move DT kirkwood into mach-mvebu   Ezequiel Garcia
• [PATCH v2] clk: respect the clock dependencies in of_clk_init   Ezequiel Garcia
• [PATCH] watchdog: orion_wdt: Use %pa to print 'phys_addr_t'   Ezequiel Garcia
• [RFC/PATCH 1/2] ARM: mvebu: Enable Armada 375 watchdog in the devicetree   Ezequiel Garcia
• [RFC/PATCH 2/2] ARM: mvebu: system-controller: Add A375 initialization   Ezequiel Garcia
• [PATCH 0/2] Watchdog on Armada 375 SoC   Ezequiel Garcia
• [PATCH 1/2] ARM: mvebu: Enable Armada 375 watchdog in the devicetree   Ezequiel Garcia
• [PATCH 2/2] ARM: mvebu: system-controller: Add A375 initialization   Ezequiel Garcia
• [PATCH 00/10] pinctrl: mvebu: remove hard-coded addresses from Dove pinctrl   Ezequiel Garcia
• [PATCH 0/2] Watchdog on Armada 375 SoC   Ezequiel Garcia
• [PATCH] arm: removed compiler warning   John de la Garza
• Why are imprecise external aborts masked on recent kernel while booting ?   Fabrice Gasnier
• Why are imprecise external aborts masked on recent kernel while booting ?   Fabrice Gasnier
• Why are imprecise external aborts masked on recent kernel while booting ?   Fabrice Gasnier
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Fabrice Gasnier
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Fabrice Gasnier
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Fabrice Gasnier
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Fabrice Gasnier
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Fabrice Gasnier
• [PATCH v2] ARM: Add imprecise abort enable/disable macro   Fabrice Gasnier
• [PATCH v2] ARM: Add imprecise abort enable/disable macro   Fabrice Gasnier
• [PATCH v2] ARM: Add imprecise abort enable/disable macro   Fabrice Gasnier
• [PATCH 0/8] tty/serial: at91: Add missing modem signals to atmel_serial.   Richard Genoud
• [PATCH 1/8] tty/serial: at91: use dev_err instead of printk   Richard Genoud
• [PATCH 2/8] tty/serial: at91: remove unused open/close hooks   Richard Genoud
• [PATCH 3/8] tty/serial: at91: prepare for more gpio lines to come   Richard Genoud
• [PATCH 4/8] tty/serial: at91: add cts control via gpio   Richard Genoud
• [PATCH 5/8] tty/serial: at91: add dtr control via gpio   Richard Genoud
• [PATCH 6/8] tty/serial: at91: add dsr control via gpio   Richard Genoud
• [PATCH 7/8] tty/serial: at91: add ring control via gpio   Richard Genoud
• [PATCH 8/8] tty/serial: at91: add dcd control via gpio   Richard Genoud
• [PATCH 5/8] tty/serial: at91: add dtr control via gpio   Richard Genoud
• [PATCH v2 0/4] tty/serial: Add helpers to use GPIOs to control modem lines   Richard Genoud
• [PATCH v2 1/4] tty/serial: Add GPIOLIB helpers for controlling modem lines   Richard Genoud
• [PATCH v2 2/4] tty/serial: at91: use dev_err instead of printk   Richard Genoud
• [PATCH v2 3/4] tty/serial: at91: remove unused open/close hooks   Richard Genoud
• [PATCH v2 4/4] tty/serial: at91: use mctrl_gpio helpers   Richard Genoud
• [PATCH v2 1/4] tty/serial: Add GPIOLIB helpers for controlling modem lines   Richard Genoud
• [PATCH v3 0/7] tty/serial: Add helpers to use GPIOs to control modem lines and implement atmel_serial.c   Richard Genoud
• [PATCH v3 1/7] tty/serial: Add GPIOLIB helpers for controlling modem lines   Richard Genoud
• [PATCH v3 2/7] tty/serial: at91: use dev_err instead of printk   Richard Genoud
• [PATCH v3 3/7] tty/serial: at91: remove unused open/close hooks   Richard Genoud
• [PATCH v3 4/7] tty/serial: at91: use mctrl_gpio helpers   Richard Genoud
• [PATCH v3 5/7] ARM: at91: gpio: implement get_direction   Richard Genoud
• [PATCH v3 6/7] pinctrl: at91: implement get_direction   Richard Genoud
• [PATCH v3 7/7] tty/serial: at91: add interrupts for modem control lines   Richard Genoud
• [PATCH v3 0/7] tty/serial: Add helpers to use GPIOs to control modem lines and implement atmel_serial.c   Richard Genoud
• [PATCH v3 1/7] tty/serial: Add GPIOLIB helpers for controlling modem lines   Richard Genoud
• [PATCH v3 4/7] tty/serial: at91: use mctrl_gpio helpers   Richard Genoud
• [PATCH v3 1/7] tty/serial: Add GPIOLIB helpers for controlling modem lines   Richard Genoud
• [PATCH v3 6/7] pinctrl: at91: implement get_direction   Richard Genoud
• [PATCH v4 0/5] tty/serial: Add helpers to use GPIOs to control modem lines and implement atmel_serial.c   Richard Genoud
• [PATCH v4 1/5] tty/serial: Add GPIOLIB helpers for controlling modem lines   Richard Genoud
• [PATCH v4 2/5] tty/serial: at91: use dev_err instead of printk   Richard Genoud
• [PATCH v4 3/5] tty/serial: at91: remove unused open/close hooks   Richard Genoud
• [PATCH v4 4/5] tty/serial: at91: use mctrl_gpio helpers   Richard Genoud
• [PATCH v4 5/5] tty/serial: at91: add interrupts for modem control lines   Richard Genoud
• [PATCH v4 1/5] tty/serial: Add GPIOLIB helpers for controlling modem lines   Richard Genoud
• [RFC 1/1] Device Tree Schema Source format description   David Gibson
• [PATCH V5 2/4] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP   Thomas Gleixner
• [PATCH v4 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Thomas Gleixner
• [GIT PULL] irqchip: dove: drivers for v3.14   Thomas Gleixner
• [PATCH v5 4/6] spmi: pmic_arb: add support for interrupt handling   Thomas Gleixner
• [PATCH v4 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Thomas Gleixner
• [PATCH v3 5/7] clocksource/cadence_ttc: Use only one counter   Thomas Gleixner
• [GIT PULL] irqchip: dove: drivers for v3.14   Thomas Gleixner
• [PATCH v5 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Thomas Gleixner
• [PATCH 2/2] clocksource: Make clocksource register functions void   Thomas Gleixner
• [PATCH 2/2] clocksource: Make clocksource register functions void   Thomas Gleixner
• [PATCH 1/2] PPC: powernv: remove redundant cpuidle_idle_call()   Thomas Gleixner
• [PATCH 2/2] ARM64: powernv: remove redundant cpuidle_idle_call()   Thomas Gleixner
• [PATCH v5 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Thomas Gleixner
• [PATCH] irq: Add new flag to ack level-triggered interrupts before unmasking   Thomas Gleixner
• [linux-sunxi] Re: [PATCH] irq: Add new flag to ack level-triggered interrupts before unmasking   Thomas Gleixner
• [linux-sunxi] Re: [PATCH] irq: Add new flag to ack level-triggered interrupts before unmasking   Thomas Gleixner
• [linux-sunxi] Re: [PATCH] irq: Add new flag to ack level-triggered interrupts before unmasking   Thomas Gleixner
• [PATCH v1 1/2] clocksource: mct: remove request_irq from exynos4_local_timer_setup   Thomas Gleixner
• [PATCH 11/27] clocksource: sh_cmt: Add support for multiple channels per device   Thomas Gleixner
• [GIT PULL] irqchip: mvebu fixes for v3.14   Thomas Gleixner
• [GIT PULL] irqchip: dove: drivers for v3.14   Thomas Gleixner
• [patch 08/26] arm: Replace various irq_desc accesses   Thomas Gleixner
• [patch 09/26] arm: mmp: Remove pointless fiddling with irq internals   Thomas Gleixner
• [patch 09/26] arm: mmp: Remove pointless fiddling with irq internals   Thomas Gleixner
• [patch 09/26] arm: mmp: Remove pointless fiddling with irq internals   Thomas Gleixner
• [PATCH RFC v1 1/3] ARM: Add irq disabled version of soft_restart.   Thomas Gleixner
• [PATCH] irq: Consider a negative return value of irq_startup() as an error   Thomas Gleixner
• [patch 09/26] arm: mmp: Remove pointless fiddling with irq internals   Thomas Gleixner
• 'unannotated irqs-on' lockdep warning   Christian Gmeiner
• HARDIRQ-safe -> HARDIRQ-unsafe lock order detected   Christian Gmeiner
• 'unannotated irqs-on' lockdep warning   Christian Gmeiner
• Freescale FEC packet loss   Christian Gmeiner
• [RFC PATCHv2 0/4] Add DT support for fixed PHYs   Christian Gmeiner
• [PATCH RFC v2 00/35] Second preview of imx-drm cleanup series   Christian Gmeiner
• [PATCH RFC v2 00/35] Second preview of imx-drm cleanup series   Christian Gmeiner
• imx6: usbhc2/3 and HSIC   Christian Gmeiner
• [PATCH] ARM: imx6: build pm-imx6q.c independently of CONFIG_PM   Christian Gmeiner
• [PATCH v5 13/14] ARM: sun4i: dts: Add ahci / sata support   Hans de Goede
• [PATCH v5 00/14] ahci: library-ise ahci_platform, add sunxi driver and cleanup imx driver   Hans de Goede
• [PATCH RFC v4 00/10] ahci: library-ise ahci_platform, add sunxi driver and cleanup imx driver   Hans de Goede
• [PATCH v5 14/14] ARM: sun7i: dts: Add ahci / sata support   Hans de Goede
• [PATCH v2 2/5] clk: sunxi: Add USB clock register defintions   Hans de Goede
• [PATCH v5 08/14] ahci-platform: "Library-ise" suspend / resume functionality   Hans de Goede
• [PATCH v2 0/6] ARM: sunxi: Add driver for SD/MMC hosts found on allwinner sunxi SOCs   Hans de Goede
• [PATCH 1/3] wdt: sunxi: Introduce a new compatible for the A10 and A31   Hans de Goede
• [linux-sunxi] [PATCH v2 1/5] clk: sunxi: Add support for USB clock-register reset bits   Hans de Goede
• [PATCH v2 2/5] clk: sunxi: Add USB clock register defintions   Hans de Goede
• [PATCH] Adding basic support for the INet-97F_Rev_02 board   Hans de Goede
• [PATCH v3 0/5] clk: sunxi usb clks support   Hans de Goede
• [PATCH v3 1/5] clk: sunxi: Add support for USB clock-register reset bits   Hans de Goede
• [PATCH v3 2/5] clk: sunxi: Add USB clock register defintions   Hans de Goede
• [PATCH v3 3/5] ARM: sun4i: dt: Add bindings for USB clocks   Hans de Goede
• [PATCH v3 4/5] ARM: sun5i: dt: Add bindings for USB clocks   Hans de Goede
• [PATCH v3 5/5] ARM: sun7i: dt: Add bindings for USB clocks   Hans de Goede
• [PATCH v3 2/5] clk: sunxi: Add USB clock register defintions   Hans de Goede
• [PATCH v4 0/5] clk: sunxi usb clks support   Hans de Goede
• [PATCH v4 1/5] clk: sunxi: Add support for USB clock-register reset bits   Hans de Goede
• [PATCH v4 2/5] clk: sunxi: Add USB clock register defintions   Hans de Goede
• [PATCH v4 3/5] ARM: sun4i: dt: Add bindings for USB clocks   Hans de Goede
• [PATCH v4 4/5] ARM: sun5i: dt: Add bindings for USB clocks   Hans de Goede
• [PATCH v4 5/5] ARM: sun7i: dt: Add bindings for USB clocks   Hans de Goede
• [PATCH v9 0/4] ohci-platform and ehci-plaform patches rebased on 3.14-rc1   Hans de Goede
• [PATCH v9 1/4] ohci-platform: Add support for devicetree instantiation   Hans de Goede
• [PATCH v9 2/4] ehci-platform: Add support for clks and phy passed through devicetree   Hans de Goede
• [PATCH v9 3/4] ohci-platform: Add support for controllers with big-endian regs / descriptors   Hans de Goede
• [PATCH v9 4/4] ehci-platform: Add support for controllers with big-endian regs / descriptors   Hans de Goede
• [PATCH] ARM: sunxi: Add driver for sunxi usb phy   Hans de Goede
• [PATCH] ARM: sunxi: Add driver for sunxi usb phy   Hans de Goede
• [PATCH v2] ARM: sunxi: Add driver for sunxi usb phy   Hans de Goede
• [PATCH v9 0/4] ohci-platform and ehci-plaform patches rebased on 3.14-rc1   Hans de Goede
• [PATCH v2] ARM: sunxi: Add driver for sunxi usb phy   Hans de Goede
• [linux-sunxi] [PATCH v2] ARM: sunxi: Add driver for sunxi usb phy   Hans de Goede
• [PATCH v9 2/4] ehci-platform: Add support for clks and phy passed through devicetree   Hans de Goede
• [PATCH v9 2/4] ehci-platform: Add support for clks and phy passed through devicetree   Hans de Goede
• ohci-/ehci-platform: Change compatible string to ?hci-platform   Hans de Goede
• [PATCH 1/2] ohci-platform: Change compatible string from usb-ohci to ohci-platform   Hans de Goede
• [PATCH 2/2] ehci-platform: Change compatible string from usb-ehci to ehci-platform   Hans de Goede
• [PATCH] ARM: dts: OMAP2+: Fix boot with multi_v7_defconfig   Hans de Goede
• [PATCH 1/2] ohci-platform: Change compatible string from usb-ohci to ohci-platform   Hans de Goede
• [PATCH 2/2] ehci-platform: Change compatible string from usb-ehci to ehci-platform   Hans de Goede
• ohci-/ehci-platform: Change compatible string to ?hci-platform   Hans de Goede
• [PATCH] phy-core: Don't allow building phy-core as a module   Hans de Goede
• [PATCH v2 0/2] ohci-/ehci-platform: Change compatible string to generic-?hci   Hans de Goede
• [PATCH v2 1/2] ohci-platform: Change compatible string from usb-ohci to generic-ohci   Hans de Goede
• [PATCH v2 2/2] ehci-platform: Change compatible string from usb-ehci to generic-ehci   Hans de Goede
• [PATCH 1/2] uhci-platform: Change compatible string from platform-uhci to generic-uhci   Hans de Goede
• [PATCH 2/2] xhci-platform: Change compatible string from xhci-platform to generic-xhci   Hans de Goede
• ohci-/ehci-platform: Change compatible string to ?hci-platform   Hans de Goede
• [PATCH 1/4] pinctrl-sunxi: various fixes   Hans de Goede
• [PATCH 1/4] pinctrl-sunxi: Fix sun5i-a13 port F multiplexing   Hans de Goede
• [PATCH 2/4] pinctrl-sunxi: Fix hang on gpio irq   Hans de Goede
• [PATCH 3/4] pinctrl-sunxi: Fix masking when setting irq type   Hans de Goede
• [PATCH 4/4] pinctrl-sunxi: Fix interrupt register offset calculation   Hans de Goede
• [PATCH v7 5/8] ARM: dts: sun7i: Add support for mmc   Hans de Goede
• [PATCH v7 4/8] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Hans de Goede
• [PATCH 3/3] ahci: st: Add support for ST's SATA IP   Hans de Goede
• [PATCH v6 00/18] ahci: library-ise ahci_platform, add sunxi driver and cleanup imx driver   Hans de Goede
• [PATCH v6 01/18] libahci: Allow drivers to override start_engine   Hans de Goede
• [PATCH v6 02/18] libahci: Move ahci_host_priv declaration to include/linux/ahci.h   Hans de Goede
• [PATCH v6 03/18] ahci-platform: Pass ahci_host_priv ptr to ahci_platform_data init method   Hans de Goede
• [PATCH v6 04/18] ahci-platform: Add support for devices with more then 1 clock   Hans de Goede
• [PATCH v6 05/18] ahci-platform: Add support for an optional regulator for sata-target power   Hans de Goede
• [PATCH v6 06/18] ahci-platform: Add enable_ / disable_resources helper functions   Hans de Goede
• [PATCH v6 07/18] ahci-platform: "Library-ise" ahci_probe functionality   Hans de Goede
• [PATCH v6 08/18] ahci-platform: "Library-ise" suspend / resume functionality   Hans de Goede
• [PATCH v6 09/18] ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to ahci_platform   Hans de Goede
• [PATCH v6 10/18] ahci-imx: Port to library-ised ahci_platform   Hans de Goede
• [PATCH v6 11/18] ata: ahci_platform: Add DT compatible for Synopsis DWC AHCI controller   Hans de Goede
• [PATCH v6 12/18] ata: ahci_platform: Update DT compatible list   Hans de Goede
• [PATCH v6 13/18] ata: ahci_platform: Manage SATA PHY   Hans de Goede
• [PATCH v6 14/18] ata: ahci_platform: Add 'struct device' argument to ahci_platform_put_resources()   Hans de Goede
• [PATCH v6 15/18] ata: ahci_platform: runtime resume the device before use   Hans de Goede
• [PATCH v6 16/18] ARM: sun4i: dt: Remove grouping + simple-bus compatible for regulators   Hans de Goede
• [PATCH v6 17/18] ARM: sun4i: dt: Add ahci / sata support   Hans de Goede
• [PATCH v6 18/18] ARM: sun7i: dt: Add ahci / sata support   Hans de Goede
• [PATCH v7 4/8] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Hans de Goede
• [PATCH v6 00/18] ahci: library-ise ahci_platform, add sunxi driver and cleanup imx driver   Hans de Goede
• [PATCH v6 00/18] ahci: library-ise ahci_platform, add sunxi driver and cleanup imx driver   Hans de Goede
• [PATCH v6 17/18] ARM: sun4i: dt: Add ahci / sata support   Hans de Goede
• [PATCH v7 4/8] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Hans de Goede
• No subject   Hans de Goede
• [PATCH v7 01/15] libahci: Allow drivers to override start_engine   Hans de Goede
• [PATCH v7 02/15] ahci-platform: Add support for devices with more then 1 clock   Hans de Goede
• [PATCH v7 03/15] ahci-platform: Add support for an optional regulator for sata-target power   Hans de Goede
• [PATCH v7 04/15] ahci-platform: Add enable_ / disable_resources helper functions   Hans de Goede
• [PATCH v7 05/15] ahci-platform: "Library-ise" ahci_probe functionality   Hans de Goede
• [PATCH v7 06/15] ahci-platform: "Library-ise" suspend / resume functionality   Hans de Goede
• [PATCH v7 07/15] ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to ahci_platform   Hans de Goede
• [PATCH v7 08/15] ahci-imx: Port to library-ised ahci_platform   Hans de Goede
• [PATCH v7 09/15] ata: ahci_platform: Add DT compatible for Synopsis DWC AHCI controller   Hans de Goede
• [PATCH v7 10/15] ata: ahci_platform: Update DT compatible list   Hans de Goede
• [PATCH v7 11/15] ata: ahci_platform: Manage SATA PHY   Hans de Goede
• [PATCH v7 12/15] ata: ahci_platform: runtime resume the device before use   Hans de Goede
• [PATCH v7 13/15] ARM: sun4i: dt: Remove grouping + simple-bus compatible for regulators   Hans de Goede
• [PATCH v7 14/15] ARM: sun4i: dt: Add ahci / sata support   Hans de Goede
• [PATCH v7 15/15] ARM: sun7i: dt: Add ahci / sata support   Hans de Goede
• [RFC 0/3] ahci_platform: drop support for a bunch of obsolete platform device types   Hans de Goede
• [PATCH v7 00/15] ahci: library-ise ahci_platform, add sunxi driver and cleanup imx driver   Hans de Goede
• [PATCH v6 17/18] ARM: sun4i: dt: Add ahci / sata support   Hans de Goede
• [PATCH v7 13/15] ARM: sun4i: dt: Remove grouping + simple-bus compatible for regulators   Hans de Goede
• [PATCH] ahci_sunxi: Use msleep instead of mdelay   Hans de Goede
• [PATCH v3 0/4] ARM: sunxi: Add driver for sunxi usb phy + usb dts bindings   Hans de Goede
• [PATCH v3 1/4] ARM: sunxi: Add driver for sunxi usb phy   Hans de Goede
• [PATCH v3 2/4] ARM: sun4i: dt: Add USB host bindings   Hans de Goede
• [PATCH v3 3/4] ARM: sun5i: dt: Add USB host bindings   Hans de Goede
• [PATCH v3 4/4] ARM: sun7i: dt: Add USB host bindings   Hans de Goede
• [GIT PULL] tree-wide: clean up no longer required #include <linux/init.h>   Paul Gortmaker
• [GIT PULL] tree-wide: clean up no longer required #include <linux/init.h>   Paul Gortmaker
• [PATCH v2 5/7] ARM: KVM: one_reg coproc set and get BE fixes   Alexander Graf
• [PATCH 4/5] ARM64: KVM: vgic_elrsr and vgic_eisr need to be byteswapped in BE case   Alexander Graf
• [RFC] ARM VM System Sepcification   Alexander Graf
• [RFC] ARM VM System Sepcification   Alexander Graf
• [PATCH 0/2] Avoid to use Xen DMA ops when the device is protected by an IOMMU   Julien Grall
• [PATCH 1/2] arm/xen: Introduce need_xen_dma_ops and use it in get_dma_ops   Julien Grall
• [PATCH 2/2] arm/xen: Don't use xen DMA ops when the device is protected by an IOMMU   Julien Grall
• [PATCH V2 1/3] dt: palmas: support IRQ inversion at the board level   Graeme Gregory
• [PATCH 00/11] ARM: dts: sbc-t3x: add support for more boards   Igor Grinberg
• [PATCH] arm: omap3: cm-t35: remove MACH_CM_T3730   Igor Grinberg
• [PATCH 1/5] ARM: omap2: cm-t35: Add regulators and clock for camera sensor   Igor Grinberg
• [PATCH 00/11] ARM: dts: sbc-t3x: add support for more boards   Igor Grinberg
• [PATCH] arm: dts: Add support for Compulab sbc-t3530 with cm-t35   Igor Grinberg
• [Patch v4 0/2] Add Qualcomm BAM dmaengine driver   Andy Gross
• [Patch v4 1/2] dmaengine: add Qualcomm BAM dma driver   Andy Gross
• [Patch v4 2/2] dmaengine: qcom_bam_dma: Add device tree binding   Andy Gross
• [Patch v4 1/2] dmaengine: add Qualcomm BAM dma driver   Andy Gross
• [Patch v5 0/2] Add Qualcomm BAM dmaengine driver   Andy Gross
• [Patch v5 1/2] dmaengine: add Qualcomm BAM dma driver   Andy Gross
• [Patch v5 2/2] dmaengine: qcom_bam_dma: Add device tree binding   Andy Gross
• [Patch v5 1/2] dmaengine: add Qualcomm BAM dma driver   Andy Gross
• [Patch v6 0/2] Add Qualcomm BAM dmaengine driver   Andy Gross
• [Patch v6 1/2] dmaengine: qcom_bam_dma: Add device tree binding   Andy Gross
• [Patch v6 2/2] dmaengine: add Qualcomm BAM dma driver   Andy Gross
• [Patch v6 1/2] dmaengine: qcom_bam_dma: Add device tree binding   Andy Gross
• [Patch v6 2/2] dmaengine: add Qualcomm BAM dma driver   Andy Gross
• [Patch v6 1/2] dmaengine: qcom_bam_dma: Add device tree binding   Andy Gross
• Ideas/suggestions to avoid repeated locking and reducing too many lists with dmaengine?   Andy Gross
• [Patch v7 0/2] Add Qualcomm BAM dmaengine driver   Andy Gross
• [Patch v7 1/2] dmaengine: qcom_bam_dma: Add device tree binding   Andy Gross
• [Patch v7 2/2] dmaengine: add Qualcomm BAM dma driver   Andy Gross
• [PATCH v3 2/2] i2c: New bus driver for the Qualcomm QUP I2C controller   Andy Gross
• [Patch v7 2/2] dmaengine: add Qualcomm BAM dma driver   Andy Gross
• [PATCH v3 0/2] drivers/media: Add controls for Horizontal and Vertical MV Search Range   Amit Grover
• [PATCH 1/2] [media] v4l2: Add settings for Horizontal and Vertical MV Search Range   Amit Grover
• [PATCH 2/2] [media] s5p-mfc: Add Horizontal and Vertical MV Search Range   Amit Grover
• [PATCH 0/2] Add alarm suport for the Microchip RTC devices MCP794xx   Simon Guinot
• [PATCH 1/2] rtc: rtc-ds1307: fix sysfs wakealarm attribute creation   Simon Guinot
• [PATCH 2/2] rtc: rtc-ds1307: add alarm support for mcp7941x chips   Simon Guinot
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Simon Guinot
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Simon Guinot
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Simon Guinot
• a LLC sched domain bug for panda board?   Vincent Guittot
• a LLC sched domain bug for panda board?   Vincent Guittot
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Vincent Guittot
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Vincent Guittot
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Vincent Guittot
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Vincent Guittot
• [RFC PATCH V3 1/4] pci: APM X-Gene PCIe controller driver   Jason Gunthorpe
• [PATCH] arm64: Add architecture support for PCI   Jason Gunthorpe
• [PATCH] arm64: Add architecture support for PCI   Jason Gunthorpe
• [PATCH] arm64: Add architecture support for PCI   Jason Gunthorpe
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Jason Gunthorpe
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Jason Gunthorpe
• [PATCH 10/21] ARM: MM: Add DT binding for Feroceon L2 cache   Jason Gunthorpe
• [PATCH v6 05/19] watchdog: orion: Make sure the watchdog is initially stopped   Jason Gunthorpe
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Jason Gunthorpe
• [PATCH 10/21] ARM: MM: Add DT binding for Feroceon L2 cache   Jason Gunthorpe
• [PATCH 10/21] ARM: MM: Add DT binding for Feroceon L2 cache   Jason Gunthorpe
• [PATCH 19/21] ARM: MVEBU: Simplifiy headers and make local   Jason Gunthorpe
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Jason Gunthorpe
• [PATCH 00/11] Core support for Marvell Armada 375 and 38x   Jason Gunthorpe
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Jason Gunthorpe
• [RFC/PATCH 0/3] Add devicetree scanning for randomness   Jason Gunthorpe
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Jason Gunthorpe
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Jason Gunthorpe
• [PATCH v2 2/3] ARM: bios32: use pci_enable_resource to enable PCI resources   Jason Gunthorpe
• [PATCH 1/2] bus: mvebu-mbus: Fix incorrect size for PCI aperture resources   Jason Gunthorpe
• [PATCH 2/2] PCI: mvebu - Call request_resources on the apertures   Jason Gunthorpe
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Jason Gunthorpe
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Jason Gunthorpe
• [PATCH v2 0/3] ARM: PCI: implement generic PCI host controller   Jason Gunthorpe
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Jason Gunthorpe
• [PATCH 1/2] bus: mvebu-mbus: Fix incorrect size for PCI aperture resources   Jason Gunthorpe
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Jason Gunthorpe
• [PATCH v2 0/3] ARM: PCI: implement generic PCI host controller   Jason Gunthorpe
• [RFC/PATCH 0/3] Add devicetree scanning for randomness   Jason Gunthorpe
• [PATCH v3 3/3] PCI: ARM: add support for generic PCI host controller   Jason Gunthorpe
• [PATCH v2 05/23] ARM: Kirkwood: Seperate board-dt from common and pcie code.   Jason Gunthorpe
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Jason Gunthorpe
• [PATCH v2 00/23] Move DT kirkwood into mach-mvebu   Jason Gunthorpe
• [PATCH v3 3/3] PCI: ARM: add support for generic PCI host controller   Jason Gunthorpe
• [PATCH] pcie: Add Xilinx PCIe Host Bridge IP driver   Jason Gunthorpe
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Jason Gunthorpe
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Jason Gunthorpe
• [PATCH v2 00/23] Move DT kirkwood into mach-mvebu   Jason Gunthorpe
• pci-mvebu driver on km_kirkwood   Jason Gunthorpe
• [PATCH] pcie: Add Xilinx PCIe Host Bridge IP driver   Jason Gunthorpe
• [PATCH v2 00/23] Move DT kirkwood into mach-mvebu   Jason Gunthorpe
• pci-mvebu driver on km_kirkwood   Jason Gunthorpe
• pci-mvebu driver on km_kirkwood   Jason Gunthorpe
• [PATCH v3 2/3] ARM: bios32: use pci_enable_resource to enable PCI resources   Jason Gunthorpe
• [PATCH] pcie: Add Xilinx PCIe Host Bridge IP driver   Jason Gunthorpe
• pci-mvebu driver on km_kirkwood   Jason Gunthorpe
• pci-mvebu driver on km_kirkwood   Jason Gunthorpe
• [PATCH v2 00/23] Move DT kirkwood into mach-mvebu   Jason Gunthorpe
• [PATCH 0/2] Watchdog on Armada 375 SoC   Jason Gunthorpe
• [PATCH v2 1/4] pci: OF: Fix the conversion of IO ranges into IO resources.   Jason Gunthorpe
• [PATCH v2 1/4] pci: OF: Fix the conversion of IO ranges into IO resources.   Jason Gunthorpe
• [PATCH v2 1/4] pci: OF: Fix the conversion of IO ranges into IO resources.   Jason Gunthorpe
• [PATCH 3/3] PCI: imx6: ventana: fixup for IRQ mismapping   Jason Gunthorpe
• [PATCH 3/3] PCI: imx6: ventana: fixup for IRQ mismapping   Jason Gunthorpe
• [PATCH v3 0/3] Prepare for running ACPI on !x86 and !ia64   Hanjun Guo
• [PATCH v3 1/3] ACPI / idle: Make idle_boot_override depend on x86 and ia64   Hanjun Guo
• [PATCH v3 2/3] ACPI / processor_core: Rework _PDC related stuff to make it more arch-independent   Hanjun Guo
• [PATCH v3 3/3] ACPI / processor: Introduce map_gic_id() to get apic id from MADT or _MAT method   Hanjun Guo
• [PATCH v4 0/5] Prepare for running ACPI on !x86 and !ia64   Hanjun Guo
• [PATCH v4 1/5] ACPI / idle: Make idle_boot_override depend on x86 and ia64   Hanjun Guo
• [PATCH v4 2/5] ACPI / processor_core: Rework _PDC related stuff to make it more arch-independent   Hanjun Guo
• [PATCH v4 3/5] ACPI / processor: Introduce map_gic_id() to get apic id from MADT or _MAT method   Hanjun Guo
• [PATCH v4 4/5] ACPI: Move BAD_MADT_ENTRY() to linux/acpi.h   Hanjun Guo
• [PATCH v4 5/5] ACPI: Replace printk with pr_* in tables.c   Hanjun Guo
• [PATCH v4 5/5] ACPI: Replace printk with pr_* in tables.c   Hanjun Guo
• [PATCH v5 0/5] Prepare for running ACPI on !x86 and !ia64   Hanjun Guo
• [PATCH v5 1/5] ACPI / idle: Make idle_boot_override depend on x86 and ia64   Hanjun Guo
• [PATCH v5 2/5] ACPI / processor_core: Rework _PDC related stuff to make it more arch-independent   Hanjun Guo
• [PATCH v5 3/5] ACPI / processor: Introduce map_gic_id() to get apic id from MADT or _MAT method   Hanjun Guo
• [PATCH v5 4/5] ACPI: Move BAD_MADT_ENTRY() to linux/acpi.h   Hanjun Guo
• [PATCH v5 5/5] ACPI: Replace printk with pr_* in tables.c   Hanjun Guo
• [PATCH v5 2/5] ACPI / processor_core: Rework _PDC related stuff to make it more arch-independent   Hanjun Guo
• [RESEND][PATCH v5 2/5] ACPI / processor_core: Rework _PDC related stuff to make it more arch-independent   Hanjun Guo
• [Linaro-acpi] [PATCH v4 5/5] ACPI: Replace printk with pr_* in tables.c   Hanjun Guo
• [PATCH v5 3/5] ACPI / processor: Introduce map_gic_id() to get apic id from MADT or _MAT method   Hanjun Guo
• [PATCH v5 3/5] ACPI / processor: Introduce map_gic_id() to get apic id from MADT or _MAT method   Hanjun Guo
• [PATCH v5 3/5] ACPI / processor: Introduce map_gic_id() to get apic id from MADT or _MAT method   Hanjun Guo
• [PATCH v5 2/5] ACPI / processor_core: Rework _PDC related stuff to make it more arch-independent   Hanjun Guo
• [GIT PULL] ARM: imx: device tree changes for 3.15, take 1   Shawn Guo
• v3.14-rc1 locking bug in system suspend   Shawn Guo
• [PATCH] ARM: imx6q: remove unneeded clk lookups   Shawn Guo
• imx6dl/imx6q fec rmii mode with external ref_clk   Shawn Guo
• [PATCH] ARM: imx6q: support ptp and rmii clock from pad   Shawn Guo
• emmc on imx6 sabresd   Shawn Guo
• [PATCH v2 1/2] ARM: dts: imx6sl-evk: Add PFUZE100 support   Shawn Guo
• [PATCH v2 2/2] ARM: dts: imx6sl-evk: Add audio support   Shawn Guo
• [PATCH v2] ARM: dts: imx6qdl-sabreauto: Add PFUZE100 support   Shawn Guo
• [PATCH] ARM: imx6: Initialize low-power mode early again   Shawn Guo
• [GIT PULL] ARM: imx: fixes for 3.14   Shawn Guo
• v3.14-rc1 locking bug in system suspend   Shawn Guo
• [GIT PULL] ARM: imx: device tree changes for 3.15, take 1   Shawn Guo
• [alsa-devel] v3.14-rc1 locking bug in system suspend   Shawn Guo
• [PATCH] ASoC: fsl: fix pm support of machine drivers   Shawn Guo
• [GIT PULL] ARM: imx: device tree changes for 3.15, take 1   Shawn Guo
• [GIT PULL v2] ARM: imx: i.MX6 DT changes for 3.15, take 1   Shawn Guo
• [GIT PULL v2] ARM: imx: device tree changes for 3.15, take 1   Shawn Guo
• [PATCH 1/2] ARM: imx_v4_v5_defconfig: Select CONFIG_MMC_UNSAFE_RESUME   Shawn Guo
• [PATCH] ARM: dts: i.MX51 babbage: Support diagnostic LED   Shawn Guo
• [PATCH 1/3] ARM: dts: imx27-phytec-phycard-s-som: Sort entries   Shawn Guo
• [PATCH 1/2] ARM: dts: mx53: Remove 'enable-active-low' property   Shawn Guo
• [PATCH] ARM: imx6q: support ptp and rmii clock from pad   Shawn Guo
• [PATCH v3 1/2] ARM: dts: imx6sl-evk: Add PFUZE100 support   Shawn Guo
• [PATCH v2] ARM: dts: imx6qdl-sabreauto: Add PFUZE100 support   Shawn Guo
• [PATCH] ARM: dts: i.MX51 babbage: Support diagnostic LED   Shawn Guo
• [GIT PULL] ARM: imx: device tree changes for 3.15, take 1   Shawn Guo
• [PATCH resend] ARM: dts: imx6qdl-wandboard: use GPIO_6 for FEC interrupt   Shawn Guo
• [PATCH v2] ARM: dts: i.MX51 babbage: Support diagnostic LED   Shawn Guo
• [PATCH] dt/bindings: update fsl-fec regarding compatible and clocks   Shawn Guo
• imx6qdl, weim ranges and gpr1   Shawn Guo
• [PATCH] video: imxfb: Use regulator API with LCD class for powering   Shawn Guo
• [PATCH] bus: imx-weim: support weim-cs-gpr for imx6q-weim   Shawn Guo
• [PATCH v4 0/3] serial: fsl_lpuart: add DMA support   Shawn Guo
• [PATCH v4 0/3] serial: fsl_lpuart: add DMA support   Shawn Guo
• [PATCH] ARM: imx: avoid calling clk APIs in idle thread which may cause schedule   Shawn Guo
• [PATCH V2] ARM: imx: avoid calling clk APIs in idle thread which may cause schedule   Shawn Guo
• [PATCH 4/9] ARM: Select V6K instead of V6 by default for multi-platform   Shawn Guo
• [RFC PATCH 1/4] ARM: imx6: gpc: Add PU power domain for GPU/VPU   Shawn Guo
• [RFC PATCH 4/4] ARM: dts: imx6qdl: Add PU power-domain information to gpc node   Shawn Guo
• [RFC PATCH 0/4] i.MX6 PU power domain support   Shawn Guo
• [PATCH] ARM: dts: imx6qdl-sabresd: Do not place regulator nodes under simple-bus   Shawn Guo
• [PATCH 2/2] ARM: imx: add speed grading check for i.mx6 soc   Shawn Guo
• [RFC PATCH 4/4] ARM: dts: imx6qdl: Add PU power-domain information to gpc node   Shawn Guo
• [PATCH] ARM: dts: imx6qdl-sabresd: Do not place regulator nodes under simple-bus   Shawn Guo
• [PATCH RFC v2 00/35] Second preview of imx-drm cleanup series   Shawn Guo
• [PATCH] ARM: dts: imx6qdl-sabresd: Do not place regulator nodes under simple-bus   Shawn Guo
• [PATCH] ARM: dts: imx27-phytec-phycard-s-som: Rename file to .dtsi   Shawn Guo
• [PATCH] ARM: dts: imx6qdl-sabresd: Do not place regulator nodes under simple-bus   Shawn Guo
• [PATCH V2 1/2] ARM: dts: imx6q: add 852MHz setpoint for CPU freq   Shawn Guo
• [PATCH] bus: imx-weim: support weim-cs-gpr for imx6q-weim   Shawn Guo
• [PATCH v2] bus: imx-weim: support CS GPR config for imx6q-weim   Shawn Guo
• [PATCH] thermal: imx: update formula for thermal sensor   Shawn Guo
• [PATCH] ARM: imx6: fix !CONFIG_PM and !CONFIG_CPU_IDLE build   Shawn Guo
• [PATCH v5 1/3] ARM: dts: vf610-twr: Add ADC support   Shawn Guo
• [PATCH] ARM: imx6: fix !CONFIG_PM and !CONFIG_CPU_IDLE build   Shawn Guo
• [PATCH] ARM: imx6: build pm-imx6q.c independently of CONFIG_PM   Shawn Guo
• [PATCH v2] bus: imx-weim: support CS GPR config for imx6q-weim   Shawn Guo
• [PATCH v3] bus: imx-weim: support CS GPR config for imx6q-weim   Shawn Guo
• [PATCH v3] bus: imx-weim: support CS GPR config for imx6q-weim   Shawn Guo
• [PATCH v3] bus: imx-weim: support CS GPR config for imx6q-weim   Shawn Guo
• [PATCH v4] bus: imx-weim: support CS GPR configuration   Shawn Guo
• [PATCH] ARM: imx_v6_v7_defconfig: Select imx thermal and cpufreq   Shawn Guo
• [PATCH v4] bus: imx-weim: support CS GPR configuration   Shawn Guo
• [PATCH v6] ARM: DTS: imx5* imx6*, use imx51-ssi   Shawn Guo
• [PATCH v2 2/7] ARM: imx6: gpc: Add PU power domain for GPU/VPU   Shawn Guo
• [PATCH 1/2] ARM: dts: imx6qdl-sabresd: Add hog entry for GPIO4_10   Shawn Guo
• [PATCH 2/2] ARM: dts: imx6qdl-sabresd: Provide min/max voltages for codec regulator   Shawn Guo
• [PATCH 1/2] ARM: dts: imx6qdl-sabresd: Add hog entry for GPIO4_10   Shawn Guo
• [PATCH] dma: sdma: Add imx25 compatible   Shawn Guo
• [PATCH] ARM: dts: imx27-phytec-phycore-*: Add diagnostic PMIC LEDs   Shawn Guo
• [PATCH] ARM: dts: imx27-phytec-phycore-*: Add diagnostic PMIC LEDs   Shawn Guo
• [PATCH] dt/bindings: update fsl-fec regarding compatible and clocks   Shawn Guo
• [PATCH v4] bus: imx-weim: support CS GPR configuration   Shawn Guo
• [PATCH v4] bus: imx-weim: support CS GPR configuration   Shawn Guo
• [PATCH] dt/bindings: update fsl-fec regarding compatible and clocks   Shawn Guo
• [PATCH] ARM: mach-imx: Select CONFIG_SRAM at ARCH_MXC level   Shawn Guo
• [PATCH] ARM: imx_v6_v7_defconfig: Select CONFIG_DEBUG_FS   Shawn Guo
• [PATCH RESEND] ARM: imx6: build pm-imx6q.c independently of CONFIG_PM   Shawn Guo
• [PATCH RESEND v11 1/2] ARM: dts: vf610: Add eDMA node   Shawn Guo
• [PATCH v6 1/3] ARM: dts: vf610: lpuart: Add eDMA support   Shawn Guo
• [PATCH v5] bus: imx-weim: support CS GPR configuration   Shawn Guo
• [PATCH] dt/bindings: update fsl-fec regarding compatible and clocks   Shawn Guo
• [PATCH v9 01/12] usb: doc: phy-mxs: Add more compatible strings   Shawn Guo
• [PATCH] ARM: dts: imx6sl-evk: Keep VGEN1 regulator always enabled   Shawn Guo
• [PATCH v9 01/12] usb: doc: phy-mxs: Add more compatible strings   Shawn Guo
• [PATCH v3 1/4] Phytec phyFLEX-i.MX6 : Added USB_OTG Support   Shawn Guo
• [PATCH v5 1/3] ARM: dts: vf610-twr: Add ADC support   Shawn Guo
• [PATCH v3 1/4] Phytec phyFLEX-i.MX6 : Added USB_OTG Support   Shawn Guo
• [PATCH] ARM: dts: imx6sl-evk: Keep VGEN1 regulator always enabled   Shawn Guo
• [PATCH v3 1/4] Phytec phyFLEX-i.MX6 : Added USB_OTG Support   Shawn Guo
• [PATCH 2/4] ARM: dts: Enable SAI ALSA SoC DAI device for Vybrid VF610 TOWER board.   Shawn Guo
• [PATCH 1/4] ARM: dts: Add Freescale SAI ALSA SoC Digital Audio Interface node for VF610.   Shawn Guo
• [PATCH 2/4] ARM: dts: Enable SAI ALSA SoC DAI device for Vybrid VF610 TOWER board.   Shawn Guo
• [PATCH 3/4] ARM: dts: Enable SGTL5000 codec based audio driver node for VF610 TOWER.   Shawn Guo
• [PATCH] PCI: imx6: Fix link_up detection   Shawn Guo
• linux-next: manual merge of the imx-mxs tree with the arm-soc tree   Shawn Guo
• [PATCH v2 0/4] Add audio card DT node support for Vybird-TWR board   Shawn Guo
• [PATCH] ARM: dts: imx6qdl-sabreauto: Support debug LED   Shawn Guo
• [PATCH v2] ARM: dts: imx6sl-evk: Keep VGEN1 regulator always enabled   Shawn Guo
• [PATCH v5] bus: imx-weim: support CS GPR configuration   Shawn Guo
• [PATCH] ARM: dts: mxs: Fix the RTC compatible prop on M28EVK   Shawn Guo
• [PATCH v4 1/4] ARM: dts: imx6q-phytec: Added USB_OTG Support   Shawn Guo
• [RFC PATCH 2/2] ARM: imx6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority   Shawn Guo
• [PATCH] ARM: dts: mxs: Fix the RTC compatible prop on M28EVK   Shawn Guo
• [PATCH v5 1/3] ARM: dts: vf610-twr: Add ADC support   Shawn Guo
• [RFC PATCH 2/2] ARM: imx6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority   Shawn Guo
• [PATCH v5] bus: imx-weim: support CS GPR configuration   Shawn Guo
• [PATCH v2] ARM: mach-imx: Kconfig: Remove IMX_HAVE_PLATFORM_IMX2_WDT from SOC_IMX53   Shawn Guo
• [patch 08/26] arm: Replace various irq_desc accesses   Shawn Guo
• [PATCH 1/3] ARM: dts: i.MX27: Add USB nodes   Shawn Guo
• [PATCH RESEND] ARM: imx6: build pm-imx6q.c independently of CONFIG_PM   Shawn Guo
• [PATCH v3 1/2] ARM: imx6q: Add GPR6 and GPR7 register definitions for iomuxc gpr   Shawn Guo
• [PATCH 1/4] ARM: imx6: move v7_cpu_resume() into suspend-imx6.S   Shawn Guo
• [PATCH 2/4] ARM: imx6: build headsmp.o only on CONFIG_SMP   Shawn Guo
• [PATCH 3/4] ARM: imx6: call suspend_set_ops() from suspend routine   Shawn Guo
• [PATCH 4/4] ARM: imx6: do not call imx6q_suspend_init() with !CONFIG_SUSPEND   Shawn Guo
• [PATCH v2 1/2] ARM: dts: imx6: adjust the interrupt list in order to support MSI   Shawn Guo
• [PATCH 1/3] Documentation:spi:fsl-dspi:add DSPI dma transfer support   Shawn Guo
• [PATCH 1/3] Documentation:spi:fsl-dspi:add DSPI dma transfer support   Shawn Guo
• [PATCH 2/4] ARM: imx6: build headsmp.o only on CONFIG_SMP   Shawn Guo
• [PATCH] ARM: imx6: drop .text.head section annotation from headsmp.S   Shawn Guo
• [PATCH 1/3] ARM: imx6: introduce CONFIG_SOC_IMX6 for i.MX6 common stuff   Shawn Guo
• [PATCH 2/3] ARM: imx6: rename pm-imx6q.c to pm-imx6.c   Shawn Guo
• [PATCH 3/3] ARM: imx6: build suspend-imx6.o with CONFIG_SOC_IMX6   Shawn Guo
• [PATCH 2/3] ARM: dts: vf610: i2c: Add eDMA support   Shawn Guo
• [PATCH 1/3] i2c: add DMA support for freescale i2c driver   Shawn Guo
• [PATCH 1/4] ARM: imx6: move v7_cpu_resume() into suspend-imx6.S   Shawn Guo
• [PATCH 1/3] i2c: add DMA support for freescale i2c driver   Shawn Guo
• [PATCH 1/3] PCI: designware: add legacy PCI interrupt mapping   Shawn Guo
• [PATCH 1/3] i2c: add DMA support for freescale i2c driver   Shawn Guo
• [PATCH 1/3] i2c: add DMA support for freescale i2c driver   Shawn Guo
• [PATCH] gpu:drm:tilcdc: backlight node never found   Anatolij Gustschin
• How to select between different display timings?   Anatolij Gustschin
• Toradex Colibri PXA270 Sound Problem   Erik Habicht
• [PATCH RESEND v2 0/4] clk/exynos convert clock IDs to macros   Andrzej Hajda
• [PATCH RESEND v2 1/4] ARM: dts: exynos4: convert magic numbers to macros in clock bindings   Andrzej Hajda
• [PATCH RESEND v2 2/4] ARM: dts: exynos5250: convert magic numbers to macros in clock bindings   Andrzej Hajda
• [PATCH RESEND v2 3/4] ARM: dts: exynos5420: convert magic numbers to macros in clock bindings   Andrzej Hajda
• [PATCH RESEND v2 4/4] ARM: dts: exynos5440: convert magic numbers to macros in clock bindings   Andrzej Hajda
• [PATCH] backlight: add PWM dependencies   Jingoo Han
• [PATCH] backlight: add PWM dependencies   Jingoo Han
• [PATCH] backlight: add PWM dependencies   Jingoo Han
• [PATCH] ARM: pxa: don't select HAVE_PWM   Jingoo Han
• [PATCH] backlight: add PWM dependencies   Jingoo Han
• [PATCH 0/7] Remove HAVE_PWM config option   Jingoo Han
• [PATCH 1/7] ARM: pxa: don't select HAVE_PWM   Jingoo Han
• [PATCH 2/7] ARM: lpc32xx: don't select HAVE_PWM   Jingoo Han
• [PATCH 3/7] ARM: remove HAVE_PWM config option   Jingoo Han
• [PATCH 0/7] Remove HAVE_PWM config option   Jingoo Han
• [PATCH RESEND] ARM: LPC32xx: common.c: Remove unnecessary header inclusion   Jingoo Han
• [PATCH] pci: Add support for creating a generic host_bridge from device tree   Jingoo Han
• [PATCH] pci: Add support for creating a generic host_bridge from device tree   Jingoo Han
• [PATCH] pci: Add support for creating a generic host_bridge from device tree   Jingoo Han
• [PATCH v2 2/3] ARM: bios32: use pci_enable_resource to enable PCI resources   Jingoo Han
• [RFC PATCH 0/3] PCI: imx6: fixup for add-in card IRQ mismapping   Jingoo Han
• [PATCH 1/3] PCI: designware: add legacy PCI interrupt mapping   Jingoo Han
• [PATCH 3/3] PCI: imx6: ventana: fixup for IRQ mismapping   Jingoo Han
• [RFC PATCH 0/3] PCI: imx6: fixup for add-in card IRQ mismapping   Jingoo Han
• [PATCH 1/3] PCI: designware: add legacy PCI interrupt mapping   Jingoo Han
• [PATCH 00/17] amba: PM fixups for amba bus and some amba drivers   Ulf Hansson
• [PATCH 01/17] amba: Let runtime PM callbacks be available for CONFIG_PM   Ulf Hansson
• [PATCH 02/17] amba: Add late and early PM callbacks   Ulf Hansson
• [PATCH 03/17] mmc: mmci: Mask IRQs for all variants during runtime suspend   Ulf Hansson
• [PATCH 04/17] mmc: mmci: Let runtime PM callbacks be available for CONFIG_PM   Ulf Hansson
• [PATCH 05/17] mmc: mmci: Put the device into low power state at system suspend   Ulf Hansson
• [PATCH 06/17] spi: pl022: Let runtime PM callbacks be available for CONFIG_PM   Ulf Hansson
• [PATCH 07/17] spi: pl022: Don't ignore power domain and amba bus at system suspend   Ulf Hansson
• [PATCH 08/17] spi: pl022: Fully gate clocks at request inactivity   Ulf Hansson
• [PATCH 09/17] spi: pl022: Simplify clock handling   Ulf Hansson
• [PATCH 10/17] spi: pl022: Remove redundant pinctrl to default state in probe   Ulf Hansson
• [PATCH 11/17] i2c: nomadik: Convert to devm functions   Ulf Hansson
• [PATCH 12/17] i2c: nomadik: Remove redundant call to pm_runtime_disable   Ulf Hansson
• [PATCH 13/17] i2c: nomadik: Leave probe with the device in active state   Ulf Hansson
• [PATCH 14/17] i2c: nomadik: Fixup deployment of runtime PM   Ulf Hansson
• [PATCH 15/17] i2c: nomadik: Convert to late and early system PM callbacks   Ulf Hansson
• [PATCH 16/17] i2c: nomadik: Remove busy check for transfers at suspend late   Ulf Hansson
• [PATCH 17/17] i2c: nomadik: Fixup system suspend   Ulf Hansson
• [PATCH 14/17] i2c: nomadik: Fixup deployment of runtime PM   Ulf Hansson
• [PATCH 14/17] i2c: nomadik: Fixup deployment of runtime PM   Ulf Hansson
• [PATCH 00/17] amba: PM fixups for amba bus and some amba drivers   Ulf Hansson
• [PATCH 08/17] spi: pl022: Fully gate clocks at request inactivity   Ulf Hansson
• [PATCH 09/17] spi: pl022: Simplify clock handling   Ulf Hansson
• [PATCH 05/17] mmc: mmci: Put the device into low power state at system suspend   Ulf Hansson
• [PATCH 07/17] spi: pl022: Don't ignore power domain and amba bus at system suspend   Ulf Hansson
• [PATCH] ARM: ux500: drop DMA channel platform data for storage   Ulf Hansson
• [PATCH 1/2] pinctrl: nomadik: Silence compiler warn for !CONFIG_PM   Ulf Hansson
• [PATCH 2/2] pinctrl: nomadik: Convert to modern pm_ops   Ulf Hansson
• [PATCH 1/3] mmc: add support for power-on sequencing through DT   Ulf Hansson
• [PATCH V2 11/17] i2c: nomadik: Convert to devm functions   Ulf Hansson
• [PATCH V2 12/17] i2c: nomadik: Remove redundant call to pm_runtime_disable   Ulf Hansson
• [PATCH V2 14/17] i2c: nomadik: Fixup deployment of runtime PM   Ulf Hansson
• [PATCH V2 15/17] i2c: nomadik: Convert to late and early system PM callbacks   Ulf Hansson
• [PATCH V2 16/17] i2c: nomadik: Remove busy check for transfers at suspend late   Ulf Hansson
• [PATCH V2 17/17] i2c: nomadik: Fixup system suspend   Ulf Hansson
• [PATCH 14/17] i2c: nomadik: Fixup deployment of runtime PM   Ulf Hansson
• [PATCH V2 11/17] i2c: nomadik: Convert to devm functions   Ulf Hansson
• [PATCH] Fix uses of dma_max_pfn() when converting to a limiting address   Ulf Hansson
• [PATCH V3 11/17] i2c: nomadik: Convert to devm functions   Ulf Hansson
• [PATCH V3 12/17] i2c: nomadik: Remove redundant call to pm_runtime_disable   Ulf Hansson
• [PATCH V3 14/17] i2c: nomadik: Fixup deployment of runtime PM   Ulf Hansson
• [PATCH V3 15/17] i2c: nomadik: Convert to late and early system PM callbacks   Ulf Hansson
• [PATCH V3 16/17] i2c: nomadik: Remove busy check for transfers at suspend late   Ulf Hansson
• [PATCH V3 17/17] i2c: nomadik: Fixup system suspend   Ulf Hansson
• [PATCH V3 11/17] i2c: nomadik: Convert to devm functions   Ulf Hansson
• [PATCH 03/17] mmc: mmci: Mask IRQs for all variants during runtime suspend   Ulf Hansson
• [PATCH 03/17] mmc: mmci: Mask IRQs for all variants during runtime suspend   Ulf Hansson
• [PATCH V3 11/17] i2c: nomadik: Convert to devm functions   Ulf Hansson
• [PATCH V3 11/17] i2c: nomadik: Convert to devm functions   Ulf Hansson
• [PATCH V4 11/17] i2c: nomadik: Convert to devm functions   Ulf Hansson
• [PATCH V4 11/17] i2c: nomadik: Convert to devm functions   Ulf Hansson
• [PATCH V5 11/17] i2c: nomadik: Convert to devm functions   Ulf Hansson
• [PATCH 01/17] amba: Let runtime PM callbacks be available for CONFIG_PM   Ulf Hansson
• [PATCH] PM / Sleep: Set pm_generic functions to NULL for !CONFIG_PM_SLEEP   Ulf Hansson
• [PATCH V4 16/17] i2c: nomadik: Remove busy check for transfers at suspend late   Ulf Hansson
• [PATCH V4 17/17] i2c: nomadik: Fixup system suspend   Ulf Hansson
• [PATCH 07/17] spi: pl022: Don't ignore power domain and amba bus at system suspend   Ulf Hansson
• [PATCH 06/17] spi: pl022: Let runtime PM callbacks be available for CONFIG_PM   Ulf Hansson
• [PATCH V2 07/17] spi: pl022: Don't ignore power domain and amba bus at system suspend   Ulf Hansson
• [PATCH 06/17] spi: pl022: Let runtime PM callbacks be available for CONFIG_PM   Ulf Hansson
• [PATCH V4 16/17] i2c: nomadik: Remove busy check for transfers at suspend late   Ulf Hansson
• [PATCH 0/8] PM / Sleep / Runtime: Fixup some driver's system suspend   Ulf Hansson
• [PATCH 1/8] PM / Runtime: Fetch runtime PM callbacks using a macro   Ulf Hansson
• [PATCH 2/8] PM / Sleep / Runtime: Add pm_runtime_suspend|resume_force functions   Ulf Hansson
• [PATCH 3/8] spi: pl022: Let runtime PM callbacks be available for CONFIG_PM   Ulf Hansson
• [PATCH 4/8] spi: pl022: Don't ignore power domain and amba bus at system suspend   Ulf Hansson
• [PATCH 5/8] i2c: nomadik: Fixup system suspend   Ulf Hansson
• [PATCH 6/8] mmc: mmci: Mask IRQs for all variants during runtime suspend   Ulf Hansson
• [PATCH 7/8] mmc: mmci: Let runtime PM callbacks be available for CONFIG_PM   Ulf Hansson
• [PATCH 8/8] mmc: mmci: Put the device into low power state at system suspend   Ulf Hansson
• [PATCH 2/2] clk: ux500: Staticize ux500_twocell_get   Ulf Hansson
• [PATCH] i2c: nomadik: Silence compiler warning   Ulf Hansson
• [PATCH V2 1/8] PM / Runtime: Fetch runtime PM callbacks using a macro   Ulf Hansson
• [PATCH V2 2/8] PM / Sleep / Runtime: Add pm_runtime_suspend|resume_force functions   Ulf Hansson
• [PATCH RFC 04/10] base: power: Add generic OF-based power domain look-up   Ulf Hansson
• [PATCH 1/8] PM / Runtime: Fetch runtime PM callbacks using a macro   Ulf Hansson
• [PATCH 0/8] PM / Sleep / Runtime: Fixup some driver's system suspend   Ulf Hansson
• [PATCH V2 1/8] PM / Runtime: Fetch runtime PM callbacks using a macro   Ulf Hansson
• [PATCH 0/8] PM / Sleep / Runtime: Fixup some driver's system suspend   Ulf Hansson
• [PATCH] PM / Sleep: Set pm_generic functions to NULL for !CONFIG_PM_SLEEP   Ulf Hansson
• [PATCH V2 1/8] PM / Runtime: Fetch runtime PM callbacks using a macro   Ulf Hansson
• [PATCH V2 1/8] PM / Runtime: Fetch runtime PM callbacks using a macro   Ulf Hansson
• [PATCH V2 1/8] PM / Runtime: Fetch runtime PM callbacks using a macro   Ulf Hansson
• [PATCH V3 1/8] PM / Runtime: Fetch runtime PM callbacks using a macro   Ulf Hansson
• [PATCH V3 2/8] PM / Sleep / Runtime: Add pm_runtime_suspend|resume_force functions   Ulf Hansson
• [PATCH] arm64: Change misleading function names in dma-mapping   Ritesh Harjani
• [PATCH] arm64: Change misleading function names in dma-mapping   Ritesh Harjani
• [RFC PATCH 0/3] PCI: imx6: fixup for add-in card IRQ mismapping   Tim Harvey
• [PATCH 1/3] PCI: designware: add legacy PCI interrupt mapping   Tim Harvey
• [PATCH 2/3] PCI: designware: add ability for custom swizzle   Tim Harvey
• [PATCH 3/3] PCI: imx6: ventana: fixup for IRQ mismapping   Tim Harvey
• [RFC PATCH 0/3] PCI: imx6: fixup for add-in card IRQ mismapping   Tim Harvey
• [PATCH 1/3] PCI: designware: add legacy PCI interrupt mapping   Tim Harvey
• [RFC PATCH 0/3] PCI: imx6: fixup for add-in card IRQ mismapping   Tim Harvey
• [PATCH 7/7] PCI: designware: split samsung and fsl bindings   Tim Harvey
• [PATCH 3/3] PCI: imx6: ventana: fixup for IRQ mismapping   Tim Harvey
• [PATCH 0/7] PCI irq mapping fixes and cleanups   Tim Harvey
• [PATCH 1/3] ARM: dts: imx27-phytec-phycard-s-som: Sort entries   Sascha Hauer
• [PATCH] PCI: imx6: Fix link_up detection   Sascha Hauer
• [PATCH] PCI: imx6: Fix link_up detection   Sascha Hauer
• [PATCH] arm: imx: remove MACH_MXLADS   Sascha Hauer
• [PATCH] PCI: imx6: Fix link_up detection   Sascha Hauer
• [PATCH] dt/bindings: update fsl-fec regarding compatible and clocks   Sascha Hauer
• [PATCH] ARM: i.MX6: clk: Remove usbphy clock hacks   Sascha Hauer
• [PATCH] ARM: i.MX6: clk: Remove usbphy clock hacks   Sascha Hauer
• [PATCH] ARM: i.MX6: clk: Remove usbphy clock hacks   Sascha Hauer
• machine_desc->nr_irqs question   Krzysztof Hałasa
• [ARM] CNS3xxx: 3 regressions identified in v3.14-rc4+   Krzysztof Hałasa
• [PATCH] CNS3xxx: Fix PCIe early iotable_init().   Krzysztof Hałasa
• [PATCH 1/3] ARM: bios32: use pci_enable_resource to enable PCI resources   Bjorn Helgaas
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Bjorn Helgaas
• [PATCH] PCI: MVEBU: Use Device ID and revision from underlying endpoint   Bjorn Helgaas
• [PATCH 1/2] bus: mvebu-mbus: Fix incorrect size for PCI aperture resources   Bjorn Helgaas
• [PATCH] mvebu : pcie: dt: potential issue in range parsing   Bjorn Helgaas
• [PATCH 1/2] bus: mvebu-mbus: Fix incorrect size for PCI aperture resources   Bjorn Helgaas
• [PATCH] PCI: imx6: Fix link_up detection   Bjorn Helgaas
• [PATCH] pcie: Add Xilinx PCIe Host Bridge IP driver   Bjorn Helgaas
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Bjorn Helgaas
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Bjorn Helgaas
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Bjorn Helgaas
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Bjorn Helgaas
• pci-mvebu driver on km_kirkwood   Bjorn Helgaas
• [PATCH 1/1] pci-imx6.c: wait for retraining   Bjorn Helgaas
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Bjorn Helgaas
• pci-mvebu driver on km_kirkwood   Bjorn Helgaas
• [PATCH v3 2/3] ARM: bios32: use pci_enable_resource to enable PCI resources   Bjorn Helgaas
• pci-mvebu driver on km_kirkwood   Bjorn Helgaas
• DMABOUNCE in pci-rcar   Bjorn Helgaas
• DMABOUNCE in pci-rcar   Bjorn Helgaas
• NFS client broken in Linus' tip   Christoph Hellwig
• NFS client broken in Linus' tip   Christoph Hellwig
• NFS client broken in Linus' tip   Christoph Hellwig
• NFS client broken in Linus' tip   Christoph Hellwig
• [PATCH] ARM: tegra: only run PL310 init on systems with one   Luís Henriques
• [PATCH v5 00/14] ahci: library-ise ahci_platform, add sunxi driver and cleanup imx driver   Tejun Heo
• [PATCH v10 0/4] ata: Add APM X-Gene SoC SATA host controller support   Tejun Heo
• [PATCH v10 0/4] ata: Add APM X-Gene SoC SATA host controller support   Tejun Heo
• [v3.14-rc3 BUG] 1) panic and 2) SATA not working (Was Re: [PATCH] ATA: SATA_MV: Add missing Kconfig select statememnt)   Tejun Heo
• [PATCH 3/3] ahci: st: Add support for ST's SATA IP   Tejun Heo
• [PATCH 3/3] ahci: st: Add support for ST's SATA IP   Tejun Heo
• [PATCH v6 01/18] libahci: Allow drivers to override start_engine   Tejun Heo
• [PATCH v6 04/18] ahci-platform: Add support for devices with more then 1 clock   Tejun Heo
• [PATCH v6 05/18] ahci-platform: Add support for an optional regulator for sata-target power   Tejun Heo
• [PATCH v6 06/18] ahci-platform: Add enable_ / disable_resources helper functions   Tejun Heo
• [PATCH v6 07/18] ahci-platform: "Library-ise" ahci_probe functionality   Tejun Heo
• [PATCH v6 00/18] ahci: library-ise ahci_platform, add sunxi driver and cleanup imx driver   Tejun Heo
• [PATCH 3/3] ahci: st: Add support for ST's SATA IP   Tejun Heo
• [PATCH 3/3] ahci: st: Add support for ST's SATA IP   Tejun Heo
• [PATCH v6 00/18] ahci: library-ise ahci_platform, add sunxi driver and cleanup imx driver   Tejun Heo
• [PATCH 3/3] ahci: st: Add support for ST's SATA IP   Tejun Heo
• [PATCH 3/3] ahci: st: Add support for ST's SATA IP   Tejun Heo
• [PATCH v6 00/18] ahci: library-ise ahci_platform, add sunxi driver and cleanup imx driver   Tejun Heo
• [PATCH 3/3] ahci: st: Add support for ST's SATA IP   Tejun Heo
• [PATCH v11 2/3] ata: Add APM X-Gene SoC AHCI SATA host controller driver   Tejun Heo
• [PATCH v12 2/3] ata: Add APM X-Gene SoC AHCI SATA host controller driver   Tejun Heo
• [PATCH v12 2/3] ata: Add APM X-Gene SoC AHCI SATA host controller driver   Tejun Heo
• [PATCH v7 00/15] ahci: library-ise ahci_platform, add sunxi driver and cleanup imx driver   Tejun Heo
• [PATCH v7 07/15] ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to ahci_platform   Tejun Heo
• [RFC 0/3] ahci_platform: drop support for a bunch of obsolete platform device types   Tejun Heo
• [PATCH] ahci_sunxi: Use msleep instead of mdelay   Tejun Heo
• [PATCH v13 2/3] ata: Add APM X-Gene SoC AHCI SATA host controller driver   Tejun Heo
• [PATCH v13 3/3] arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries   Tejun Heo
• [PATCH v13 2/3] ata: Add APM X-Gene SoC AHCI SATA host controller driver   Tejun Heo
• [PATCH RESEND v10 1/4] PHY: Add function set_speed to generic PHY framework   Tejun Heo
• [PATCH v2 3/3] ahci: st: Add support for ST's SATA IP   Tejun Heo
• [PATCH v2 3/3] ahci: st: Add support for ST's SATA IP   Tejun Heo
• [PATCH v2 1/5] drivers: of: add initialization code for reserved memory   Benjamin Herrenschmidt
• pci-mvebu driver on km_kirkwood   Benjamin Herrenschmidt
• [PATCH v2 4/4] pci: Add support for creating a generic host_bridge from device tree   Benjamin Herrenschmidt
• [PATCH] ARM: hisi: don't select SMP   Rob Herring
• [PATCH] ARM: hisi: don't select SMP   Rob Herring
• [PATCH 0/3] kconfig selection fixes   Rob Herring
• [PATCH 1/3] ARM: hisi: fix kconfig warning on HAVE_ARM_TWD   Rob Herring
• [PATCH 2/3] ARM: moxart: move DMA_OF selection to driver   Rob Herring
• [PATCH 3/3] ARM: fix HAVE_ARM_TWD selection for OMAP and shmobile   Rob Herring
• [PATCH v2 RESEND 2/3] ARM: dts: clps711x: Add bindings documentation for CLPS711X irqchip driver   Rob Herring
• [PATCH v4 2/5] arm: add new asm macro update_sctlr   Rob Herring
• [PATCH RFC v4 00/10] ahci: library-ise ahci_platform, add sunxi driver and cleanup imx driver   Rob Herring
• [PATCH 1/2] clocksource: sunxi: Add new compatibles   Rob Herring
• [PATCH] arm64: Add architecture support for PCI   Rob Herring
• [PATCH] arm64: Add architecture support for PCI   Rob Herring
• [PATCH 2/2] Documentation: devicetree: Add boost-opp binding to list boost mode OPPs   Rob Herring
• [PATCH v5 2/3] clocksource: keystone: add bindings for keystone timer   Rob Herring
• [PATCH] arm64: fix early_io_map for 64K pages   Rob Herring
• [PATCH] arm64: fix early_io_map for 64K pages   Rob Herring
• [PATCH v5 2/3] clocksource: keystone: add bindings for keystone timer   Rob Herring
• [PATCH v5 2/3] clocksource: keystone: add bindings for keystone timer   Rob Herring
• [PATCH 2/4] DT: Vendor prefixes: Add ricoh, ssi and synology   Rob Herring
• [PATCH v2 0/9] ARM: multi-platform kconfig cleanup and mach-virt removal   Rob Herring
• [PATCH v2 1/9] ARM: centralize common multi-platform kconfig options   Rob Herring
• [PATCH 2/9] ARM: select HAVE_SMP for V7 multi-platform   Rob Herring
• [PATCH 3/9] ARM: select MIGHT_HAVE_CACHE_L2X0 for V7 multi-platform   Rob Herring
• [PATCH 4/9] ARM: Select V6K instead of V6 by default for multi-platform   Rob Herring
• [PATCH 5/9] ARM: bcm2835: enable V6K instead of plain V6   Rob Herring
• [PATCH 6/9] ARM: cns3xxx: enable V6K instead of plain V6   Rob Herring
• [PATCH 7/9] ARM: vt8500: enable V6K instead of plain V6   Rob Herring
• [PATCH 8/9] ARM: virt: make mach-virt just a kconfig option   Rob Herring
• [PATCH 9/9] ARM: virt: select ARM_AMBA   Rob Herring
• [PATCH 4/9] ARM: Select V6K instead of V6 by default for multi-platform   Rob Herring
• [PATCH v2 0/9] ARM: multi-platform kconfig cleanup and mach-virt removal   Rob Herring
• [RFC/PATCH 0/3] Add devicetree scanning for randomness   Rob Herring
• [PATCH 3/9] ARM: select MIGHT_HAVE_CACHE_L2X0 for V7 multi-platform   Rob Herring
• [PATCH 02/18] arm64: GICv3 device tree binding documentation   Rob Herring
• [PATCH 02/18] arm64: GICv3 device tree binding documentation   Rob Herring
• [PATCH 1/3] driver core & of: Mark of_nodes of added device as populated   Rob Herring
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Rob Herring
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Rob Herring
• [PATCH v2 1/9] ARM: centralize common multi-platform kconfig options   Rob Herring
• [PATCH 3/6] irqchip: gic: use writel instead of dsb + writel_relaxed   Rob Herring
• [PATCH v7 1/4] DT: Vendor prefixes: Add ricoh, qnap, sii and synology   Rob Herring
• [PATCH RFC v1 2/3] of: Add definition of maximum length of a property name   Rob Herring
• [GIT PULL] kconfig clean-up and mach-virt removal for 3.15   Rob Herring
• [PATCH v5 2/2] memory: ti-aemif: add bindings for AEMIF driver   Rob Herring
• [PATCH] ARM: EDMA: Use platform_get_resource functions for DT   Rob Herring
• [PATCH] ARM: move __fixup_smp out of init section   Rob Herring
• [PATCH] ARM: move __fixup_smp out of init section   Rob Herring
• [PATCH] ARM: move __fixup_smp out of init section   Rob Herring
• [PATCH v4 4/6] arm: add early_ioremap support   Rob Herring
• [PATCH v4 4/6] arm: add early_ioremap support   Rob Herring
• [PATCH] ARM: move __fixup_smp out of init section   Rob Herring
• [RFC] ARM VM System Sepcification   Rob Herring
• [RFC] ARM VM System Sepcification   Rob Herring
• [RFC] ARM VM System Sepcification   Rob Herring
• [PATCH v2 5/7] ARM: of: introduce common routine for DMA configuration   Rob Herring
• [PATCH v2 4/7] dma: of: introduce of_dma_is_coherent() helper   Rob Herring
• Rogue low pulse on TXD created by amba-pl011.c during startup   Rob Herring
• [PATCH v5 00/23]   Sebastian Hesselbarth
• [PATCH 0/4] clk: mvebu: fix clk init order   Sebastian Hesselbarth
• [PATCH v2 0/5] net: phy: Ethernet PHY powerdown optimization   Sebastian Hesselbarth
• [PATCH] clk: respect the clock dependencies in of_clk_init   Sebastian Hesselbarth
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Sebastian Hesselbarth
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Sebastian Hesselbarth
• [PATCH 02/21] IRQ: Orion: Fix getting generic chip pointer.   Sebastian Hesselbarth
• [PATCH] clk: respect the clock dependencies in of_clk_init   Sebastian Hesselbarth
• [PATCH v3 00/13] pinctrl: mvebu: restructure resource allocation   Sebastian Hesselbarth
• [PATCH v3 01/13] pinctrl: mvebu: count unnamed controls and allocate name buffer   Sebastian Hesselbarth
• [PATCH v3 02/13] pinctrl: mvebu: remove obsolete per-control name buffer allocation   Sebastian Hesselbarth
• [PATCH v3 03/13] pinctrl: mvebu: identify generic controls by name   Sebastian Hesselbarth
• [PATCH v3 04/13] pinctrl: mvebu: remove passing mvebu_mpp_ctrl to callbacks   Sebastian Hesselbarth
• [PATCH v3 05/13] pinctrl: mvebu: add common mpp reg defines to mvebu pinctrl include   Sebastian Hesselbarth
• [PATCH v3 06/13] pinctrl: mvebu: dove: provide generic mpp callbacks   Sebastian Hesselbarth
• [PATCH v3 07/13] pinctrl: mvebu: kirkwood: provide generic mpp callbacks   Sebastian Hesselbarth
• [PATCH v3 08/13] pinctrl: mvebu: armada-370: provide generic mpp callbacks   Sebastian Hesselbarth
• [PATCH v3 09/13] pinctrl: mvebu: armada-xp: provide generic mpp callbacks   Sebastian Hesselbarth
• [PATCH v3 10/13] pinctrl: mvebu: move resource allocation to SoC specific drivers   Sebastian Hesselbarth
• [PATCH v3 11/13] pinctrl: mvebu: remove common get/set functions   Sebastian Hesselbarth
• [PATCH v3 12/13] pinctrl: mvebu: dove: consolidate auto-numbered pmu mpp ranges   Sebastian Hesselbarth
• [PATCH v3 13/13] pinctrl: mvebu: dove: reuse mpp_{set, get} in pmu callbacks   Sebastian Hesselbarth
• [PATCH v3 01/13] ARM: mvebu: rename armada-370-xp.c to armada-mvebu.c   Sebastian Hesselbarth
• [PATCH v3 00/13] pinctrl: mvebu: restructure resource allocation   Sebastian Hesselbarth
• [PATCH v3 00/13] pinctrl: mvebu: restructure resource allocation   Sebastian Hesselbarth
• Stuck getting DTS working for a new kirkwood board   Sebastian Hesselbarth
• [PATCH v4 00/16] pinctrl: mvebu: restructure resource allocation   Sebastian Hesselbarth
• [PATCH v4 01/16] pinctrl: mvebu: count unnamed controls and allocate name buffer   Sebastian Hesselbarth
• [PATCH v4 02/16] pinctrl: mvebu: remove obsolete per-control name buffer allocation   Sebastian Hesselbarth
• [PATCH v4 03/16] pinctrl: mvebu: identify generic controls by name   Sebastian Hesselbarth
• [PATCH v4 04/16] pinctrl: mvebu: remove passing mvebu_mpp_ctrl to callbacks   Sebastian Hesselbarth
• [PATCH v4 05/16] pinctrl: mvebu: add common mpp reg helper to mvebu pinctrl include   Sebastian Hesselbarth
• [PATCH v4 06/16] pinctrl: mvebu: dove: provide generic mpp callbacks   Sebastian Hesselbarth
• [PATCH v4 07/16] pinctrl: mvebu: kirkwood: provide generic mpp callbacks   Sebastian Hesselbarth
• [PATCH v4 08/16] pinctrl: mvebu: armada-370: provide generic mpp callbacks   Sebastian Hesselbarth
• [PATCH v4 09/16] pinctrl: mvebu: armada-xp: provide generic mpp callbacks   Sebastian Hesselbarth
• [PATCH v4 10/16] pinctrl: mvebu: armada-375: provide generic mpp callbacks   Sebastian Hesselbarth
• [PATCH v4 11/16] pinctrl: mvebu: armada-38x: provide generic mpp callbacks   Sebastian Hesselbarth
• [PATCH v4 12/16] pinctrl: mvebu: move resource allocation to SoC specific drivers   Sebastian Hesselbarth
• [PATCH v4 13/16] pinctrl: mvebu: remove common get/set functions   Sebastian Hesselbarth
• [PATCH v4 14/16] pinctrl: mvebu: remove MPP_REG_CTRL macro   Sebastian Hesselbarth
• [PATCH v4 15/16] pinctrl: mvebu: dove: consolidate auto-numbered pmu mpp ranges   Sebastian Hesselbarth
• [PATCH v4 16/16] pinctrl: mvebu: dove: reuse mpp_{set, get} in pmu callbacks   Sebastian Hesselbarth
• [PATCH v4 00/16] pinctrl: mvebu: restructure resource allocation   Sebastian Hesselbarth
• [PATCH] net: phy: add suspend_halted module param   Sebastian Hesselbarth
• [PATCH v4 00/16] pinctrl: mvebu: restructure resource allocation   Sebastian Hesselbarth
• [PATCH 00/10] pinctrl: mvebu: remove hard-coded addresses from Dove pinctrl   Sebastian Hesselbarth
• [PATCH 01/10] devicetree: bindings: add missing Marvell Dove SoC documentation   Sebastian Hesselbarth
• [PATCH 02/10] devicetree: bindings: update MVEBU pinctrl binding documentation   Sebastian Hesselbarth
• [PATCH 03/10] ARM: dove: add additional pinctrl registers   Sebastian Hesselbarth
• [PATCH 04/10] ARM: dove: add global-config register node   Sebastian Hesselbarth
• [PATCH 05/10] pinctrl: mvebu: dove: request additional resources   Sebastian Hesselbarth
• [PATCH 06/10] pinctrl: mvebu: dove: request syscon regmap for global registers   Sebastian Hesselbarth
• [PATCH 07/10] pinctrl: mvebu: dove: use remapped mpp base registers   Sebastian Hesselbarth
• [PATCH 08/10] pinctrl: mvebu: dove: use remapped mpp4 register   Sebastian Hesselbarth
• [PATCH 09/10] pinctrl: mvebu: dove: use remapped pmu_mpp registers   Sebastian Hesselbarth
• [PATCH 10/10] pinctrl: mvebu: dove: use global register regmap   Sebastian Hesselbarth
• [PATCH 00/10] pinctrl: mvebu: remove hard-coded addresses from Dove pinctrl   Sebastian Hesselbarth
• [PATCH] net: phy: add suspend_halted module param   Sebastian Hesselbarth
• [PATCH 00/10] pinctrl: mvebu: remove hard-coded addresses from Dove pinctrl   Sebastian Hesselbarth
• [PATCH 00/10] pinctrl: mvebu: remove hard-coded addresses from Dove pinctrl   Sebastian Hesselbarth
• [PATCH 00/10] pinctrl: mvebu: remove hard-coded addresses from Dove pinctrl   Sebastian Hesselbarth
• [PATCH] net: phy: add suspend_halted module param   Sebastian Hesselbarth
• [PATCH 0/4] ARM: dove: move Dove DT to MVEBU   Sebastian Hesselbarth
• [PATCH 1/4] ARM: dove: add system controller node   Sebastian Hesselbarth
• [PATCH 2/4] ARM: dove: prepare new Dove DT Kconfig variable   Sebastian Hesselbarth
• [PATCH 3/4] ARM: mvebu: move DT Dove to MVEBU   Sebastian Hesselbarth
• [PATCH 4/4] ARM: add Marvell Dove and some drivers to multi_v7 defconfig   Sebastian Hesselbarth
• [PATCH 3/4] ARM: mvebu: move DT Dove to MVEBU   Sebastian Hesselbarth
• [PATCH 0/4] ARM: dove: move Dove DT to MVEBU   Sebastian Hesselbarth
• [PATCH v2 3/4] ARM: mvebu: move DT Dove to MVEBU   Sebastian Hesselbarth
• [PATCH 2/4] ARM: dove: prepare new Dove DT Kconfig variable   Sebastian Hesselbarth
• [PATCH 0/9] Doc/DT: DT bindings for various display components   Sebastian Hesselbarth
• [PATCH 0/9] Doc/DT: DT bindings for various display components   Sebastian Hesselbarth
• [PATCH 0/9] Doc/DT: DT bindings for various display components   Sebastian Hesselbarth
• [PATCH 2/4] ARM: dove: prepare new Dove DT Kconfig variable   Sebastian Hesselbarth
• [PATCH] at91: pmc: Fixed irq's name allocation for programmable clocks   Jean-Jacques Hiblot
• [PATCH v2] at91: pmc: Fixed irq's name allocation for programmable clocks   Jean-Jacques Hiblot
• [PATCH v2 0/4] clk: at91: better support for the PCKs   Jean-Jacques Hiblot
• [PATCH v2 1/4] clk: at91: replace prog clk round_rate with determine_rate   Jean-Jacques Hiblot
• [PATCH v2 2/4] clk: at91: propagate rate change on system clks   Jean-Jacques Hiblot
• [PATCH v2 3/4] clk: at91: fix programmable clk irq handling   Jean-Jacques Hiblot
• [PATCH v2 4/4] clk: at91: optimization of the determine_rate callback   Jean-Jacques Hiblot
• [PATCH v3 06/15] at91: dt: at91sam9261ek: Adds DT entries for the 4 user buttons   Jean-Jacques Hiblot
• [PATCH v3 03/15] at91: dt: sam9261: Basic Device Tree support for the at91sam9261ek   Jean-Jacques Hiblot
• [PATCH v3 00/15] Device Tree support for the at91sam9261ek   Jean-Jacques Hiblot
• [PATCH v3 04/15] ARM: at91: prepare common clk transition for sam9261 SoC   Jean-Jacques Hiblot
• [PATCH v3 01/15] at91: dt: Add at91sam9261 dt SoC support   Jean-Jacques Hiblot
• [PATCH v4 0/8] Device Tree support for the at91sam9261ek   Jean-Jacques Hiblot
• [PATCH v4 1/8] at91: dt: Adds support for the bus matrix declaration in the DT   Jean-Jacques Hiblot
• [PATCH v4 2/8] at91: pinctrl: don't request GPIOs used for interrupts but lock them as IRQ   Jean-Jacques Hiblot
• [PATCH v4 3/8] at91: dt: Add at91sam9261 dt SoC support   Jean-Jacques Hiblot
• [PATCH v4 4/8] at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs   Jean-Jacques Hiblot
• [PATCH v4 5/8] at91: dt: sam9261: Device Tree support for the at91sam9261ek   Jean-Jacques Hiblot
• [PATCH v4 6/8] at91: updated the at91_dt_defconfig with support for the ADS7846   Jean-Jacques Hiblot
• [PATCH v4 7/8] ARM: at91: prepare common clk transition for sam9261 SoC   Jean-Jacques Hiblot
• [PATCH v4 8/8] ARM: at91: move sam9261 SoC to common clk   Jean-Jacques Hiblot
• [PATCH v4 0/8] Device Tree support for the at91sam9261ek   Jean-Jacques Hiblot
• [PATCH v4 0/8] Device Tree support for the at91sam9261ek   Jean-Jacques Hiblot
• [PATCH v4 0/8] Device Tree support for the at91sam9261ek   Jean-Jacques Hiblot
• [PATCH v4 3/8] at91: dt: Add at91sam9261 dt SoC support   Jean-Jacques Hiblot
• [PATCH v4 3/8] at91: dt: Add at91sam9261 dt SoC support   Jean-Jacques Hiblot
• [PATCH] dt: platform driver: Fill the resources before probe and defer if needed   Jean-Jacques Hiblot
• [PATCH] dt: platform driver: Fill the resources before probe and defer if needed   Jean-Jacques Hiblot
• [PATCH v2] clk: at91: optimization of the set_rate callback   Jean-Jacques Hiblot
• [PATCHv2 1/8] ARM: at91: Add at91sam9rl DT SoC support   Jean-Jacques Hiblot
• [PATCH v2] dt: platform driver: Fill the resources before probe and defer if needed   Jean-Jacques Hiblot
• [PATCH v2] dt: platform driver: Fill the resources before probe and defer if needed   Jean-Jacques Hiblot
• [PATCH v4 2/8] at91: pinctrl: don't request GPIOs used for interrupts but lock them as IRQ   Jean-Jacques Hiblot
• [PATCH v4 2/8] at91: pinctrl: don't request GPIOs used for interrupts but lock them as IRQ   Jean-Jacques Hiblot
• [PATCH] irq: Consider a negative return value of irq_startup() as an error   Jean-Jacques Hiblot
• [PATCH] irq: Consider a negative return value of irq_startup() as an error   Jean-Jacques Hiblot
• [PATCH v2] dt: platform driver: Fill the resources before probe and defer if needed   Jean-Jacques Hiblot
• [PATCH] irq: Changed the return type of irq_chip.irq_startup() from unsigned int to int   Jean-Jacques Hiblot
• [PATCH v2 3/5] spi: sunxi: Add Allwinner A31 SPI controller driver   Kevin Hilman
• [PATCH 05/17] mmc: mmci: Put the device into low power state at system suspend   Kevin Hilman
• [PATCH 05/17] mmc: mmci: Put the device into low power state at system suspend   Kevin Hilman
• [PATCH 0/3] ARM: dts: Fixes for Overo/Tobi against 3.14-rc1   Kevin Hilman
• [PATCH] i2c: mv64xxx: Fix locked bus when offload is selected but not used on a message   Kevin Hilman
• [PATCH 05/17] mmc: mmci: Put the device into low power state at system suspend   Kevin Hilman
• [GIT PULL] mvebu: phy and ata fixes for v3.14   Kevin Hilman
• [PATCH] ARM: pxa: fix various compilation problems   Kevin Hilman
• [GIT PULL] ARM: imx: fixes for 3.14   Kevin Hilman
• [PATCH] ARM: multi_v7_defconfig: Select CONFIG_SOC_DRA7XX   Kevin Hilman
• [GIT PULL] at91: fixes for 3.14 #1   Kevin Hilman
• [GIT PULL] Xilinx Zynq fix for v3.14   Kevin Hilman
• [PATCH] ARM: ux500: disable msp2 device tree node   Kevin Hilman
• [PATCH 0/3] ARM: dts: Fixes for Overo/Tobi against 3.14-rc1   Kevin Hilman
• [PATCH v2 0/2] ohci-/ehci-platform: Change compatible string to generic-?hci   Kevin Hilman
• [GIT PULL] ARM: SoC: fixes for v3.14-rc3   Kevin Hilman
• [RESEND PATCH] ARM: mvebu: select dtbs from MACH_ARMADA_*   Kevin Hilman
• [PATCH 2/4] arm: qcom: Split Qualcomm support into legacy and multiplatform   Kevin Hilman
• [PATCH 1/5] ARM: davinci: remove tnetv107x support   Kevin Hilman
• [PATCH 1/8] PM / Runtime: Fetch runtime PM callbacks using a macro   Kevin Hilman
• [PATCH 0/8] PM / Sleep / Runtime: Fixup some driver's system suspend   Kevin Hilman
• [PATCH V2 1/8] PM / Runtime: Fetch runtime PM callbacks using a macro   Kevin Hilman
• [PATCH 2/4] arm: qcom: Split Qualcomm support into legacy and multiplatform   Kevin Hilman
• [PATCH] ARM: qcom: Enable basic support for Qualcomm platforms in multi_v7_defconfig   Kevin Hilman
• [PATCH] ARM: qcom: Enable basic support for Qualcomm platforms in multi_v7_defconfig   Kevin Hilman
• [PATCH 0/8] PM / Sleep / Runtime: Fixup some driver's system suspend   Kevin Hilman
• [PATCH v2 1/9] ARM: centralize common multi-platform kconfig options   Kevin Hilman
• [PATCH] ARM: qcom: Enable basic support for Qualcomm platforms in multi_v7_defconfig   Kevin Hilman
• [PATCH v2 1/9] ARM: centralize common multi-platform kconfig options   Kevin Hilman
• [PATCH] ARM: qcom: Enable basic support for Qualcomm platforms in multi_v7_defconfig   Kevin Hilman
• [PATCH v10 0/4] ata: Add APM X-Gene SoC SATA host controller support   Loc Ho
• [PATCH v10 0/4] ata: Add APM X-Gene SoC SATA host controller support   Loc Ho
• [PATCH v9 0/4] PHY: Add APM X-Gene SoC 15Gbps Multi-purpose PHY support   Loc Ho
• [PATCH v9 1/4] PHY: Add function set_speed to generic PHY framework   Loc Ho
• [PATCH v9 2/4] Documentation: Add APM X-Gene SoC 15Gbps Multi-purpose PHY driver binding documentation   Loc Ho
• [PATCH v9 3/4] PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver   Loc Ho
• [PATCH v9 4/4] arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries   Loc Ho
• [PATCH v11 0/3] ata: Add APM X-Gene SoC AHCI SATA host controller support   Loc Ho
• [PATCH v11 1/3] Documentation: Add documentation for APM X-Gene SoC SATA host controller DTS binding   Loc Ho
• [PATCH v11 2/3] ata: Add APM X-Gene SoC AHCI SATA host controller driver   Loc Ho
• [PATCH v11 3/3] arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries   Loc Ho
• [PATCH v10 0/4] PHY: Add APM X-Gene SoC 15Gbps Multi-purpose PHY support   Loc Ho
• [PATCH v10 1/4] PHY: Add function set_speed to generic PHY framework   Loc Ho
• [PATCH v10 2/4] Documentation: Add APM X-Gene SoC 15Gbps Multi-purpose PHY driver binding documentation   Loc Ho
• [PATCH v10 3/4] PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver   Loc Ho
• [PATCH v10 4/4] arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries   Loc Ho
• [PATCH v12 0/3] ata: Add APM X-Gene SoC AHCI SATA host controller support   Loc Ho
• [PATCH v12 1/3] Documentation: Add documentation for APM X-Gene SoC SATA host controller DTS binding   Loc Ho
• [PATCH v12 2/3] ata: Add APM X-Gene SoC AHCI SATA host controller driver   Loc Ho
• [PATCH v12 3/3] arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries   Loc Ho
• [PATCH v13 0/3] ata: Add APM X-Gene SoC AHCI SATA host controller support   Loc Ho
• [PATCH v13 1/3] Documentation: Add documentation for APM X-Gene SoC SATA host controller DTS binding   Loc Ho
• [PATCH v13 2/3] ata: Add APM X-Gene SoC AHCI SATA host controller driver   Loc Ho
• [PATCH v13 3/3] arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries   Loc Ho
• [PATCH v14 0/3] ata: Add APM X-Gene SoC AHCI SATA host controller support   Loc Ho
• [PATCH v14 1/3] Documentation: Add documentation for APM X-Gene SoC SATA host controller DTS binding   Loc Ho
• [PATCH v14 2/3] ata: Add APM X-Gene SoC AHCI SATA host controller driver   Loc Ho
• [PATCH v14 3/3] arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries   Loc Ho
• [PATCH v13 3/3] arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries   Loc Ho
• [PATCH RESEND v10 0/4] PHY: Add APM X-Gene SoC 15Gbps Multi-purpose PHY support   Loc Ho
• [PATCH RESEND v10 1/4] PHY: Add function set_speed to generic PHY framework   Loc Ho
• [PATCH RESEND v10 2/4] Documentation: Add APM X-Gene SoC 15Gbps Multi-purpose PHY driver binding documentation   Loc Ho
• [PATCH RESEND v10 3/4] PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver   Loc Ho
• [PATCH RESEND v10 4/4] arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries   Loc Ho
• [PATCH v11 0/4] PHY: Add APM X-Gene SoC 15Gbps Multi-purpose PHY support   Loc Ho
• [PATCH v11 1/4] PHY: Add function set_speed to generic PHY framework   Loc Ho
• [PATCH v11 2/4] Documentation: Add APM X-Gene SoC 15Gbps Multi-purpose PHY driver binding documentation   Loc Ho
• [PATCH v11 3/4] PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver   Loc Ho
• [PATCH v11 4/4] arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries   Loc Ho
• [PATCH RESEND v10 3/4] PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver   Loc Ho
• [PATCH RESEND v10 3/4] PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver   Loc Ho
• [PATCH RESEND v10 3/4] PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver   Loc Ho
• [PATCH v12 0/4] PHY: Add APM X-Gene SoC 15Gbps Multi-purpose PHY support   Loc Ho
• [PATCH v12 1/4] PHY: Add function set_speed to generic PHY framework   Loc Ho
• [PATCH v12 2/4] Documentation: Add APM X-Gene SoC 15Gbps Multi-purpose PHY driver binding documentation   Loc Ho
• [PATCH v12 3/4] PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver   Loc Ho
• [PATCH v12 4/4] arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries   Loc Ho
• [PATCH v12 1/4] PHY: Add function set_speed to generic PHY framework   Loc Ho
• [PATCH v12 3/4] PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver   Loc Ho
• [PATCH v12 1/4] PHY: Add function set_speed to generic PHY framework   Loc Ho
• [PATCH v12 1/4] PHY: Add function set_speed to generic PHY framework   Loc Ho
• [PATCH] asm-generic: add sched_setattr/sched_getattr syscalls   James Hogan
• [PATCH] asm-generic: add sched_setattr/sched_getattr syscalls   James Hogan
• [PATCH] irq: Changed the return type of irq_chip.irq_startup() from unsigned int to int   James Hogan
• about last level cache on big little cpu   Sudeep Holla
• [PATCH 10/21] ARM: MM: Add DT binding for Feroceon L2 cache   Sudeep Holla
• [PATCH v2 1/2] PM / OPP: Allow boost frequency to be looked up from device tree   Sudeep Holla
• [PATCH v2 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency   Sudeep Holla
• [PATCH v3 5/7] ARM: dts: Exynos: add cpu nodes, opp and cpu clock configuration data   Sudeep Holla
• [PATCH v2 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency   Sudeep Holla
• [PATCH RFC/RFT v2 6/8] ARM64: kernel: add support for cpu cache information   Sudeep Holla
• [PATCH RFC/RFT v2 7/8] ARM: kernel: add support for cpu cache information   Sudeep Holla
• [PATCH RFC/RFT v2 8/8] ARM: kernel: add outer cache support for cacheinfo implementation   Sudeep Holla
• [PATCH v2 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency   Sudeep Holla
• [PATCH v2 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency   Sudeep Holla
• [PATCH 10/21] ARM: MM: Add DT binding for Feroceon L2 cache   Sudeep Holla
• [PATCH v2 1/2] PM / OPP: Allow boost frequency to be looked up from device tree   Sudeep Holla
• [PATCH v2 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency   Sudeep Holla
• [PATCH v2 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency   Sudeep Holla
• [PATCH v2 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency   Sudeep Holla
• [PATCH RESEND] ARM: mcpm: Make all mcpm functions notrace   Sudeep Holla
• BUG: Null pointer dereference on booting TC2 with vexpress_defconfig   Sudeep Holla
• BUG: Null pointer dereference on booting TC2 with vexpress_defconfig   Sudeep Holla
• BUG: Null pointer dereference on booting TC2 with vexpress_defconfig   Sudeep Holla
• [PATCH v5 3/5] ACPI / processor: Introduce map_gic_id() to get apic id from MADT or _MAT method   Sudeep Holla
• [PATCH RFC/RFT v3 0/9] drivers: cacheinfo support   Sudeep Holla
• [PATCH RFC/RFT v3 7/9] ARM64: kernel: add support for cpu cache information   Sudeep Holla
• [PATCH RFC/RFT v3 8/9] ARM: kernel: add support for cpu cache information   Sudeep Holla
• [PATCH RFC/RFT v3 9/9] ARM: kernel: add outer cache support for cacheinfo implementation   Sudeep Holla
• [Linaro-acpi] [PATCH v4 5/5] ACPI: Replace printk with pr_* in tables.c   Sudeep Holla
• [Linaro-acpi] [PATCH v4 5/5] ACPI: Replace printk with pr_* in tables.c   Sudeep Holla
• [PATCH v5 3/5] ACPI / processor: Introduce map_gic_id() to get apic id from MADT or _MAT method   Sudeep Holla
• [PATCHv2 0/5] net: rfkill: gpio: cleanup and a few new acpi ids   Marcel Holtmann
• [PATCH 3/3] ARM: fix HAVE_ARM_TWD selection for OMAP and shmobile   Simon Horman
• [PATCH 1/3] mmc: tmio-mmc: add DMA SG synchronisation   Simon Horman
• [PATCH 2/3] mmc: sh-mmcif: add DMA SG synchronisation   Simon Horman
• [PATCH 0/8] ARM: shmobile: Conditionally select SMSC_PHY   Simon Horman
• [PATCH 00/11] ARM: shmobile: RSPI RZ and QSPI SoC and board integration   Simon Horman
• [PATCH] ARM: shmobile: r8a7790: Correct SYS DMAC clock defines   Simon Horman
• [GIT PULL] Renesas CPG update for v3.15   Simon Horman
• [PATCH] ARM: shmobile: wait for MSTP clock status to toggle, when enabling it   Simon Horman
• [GIT PULL 00/21] Renesas ARM based SoC Board Updates for v3.15   Simon Horman
• [PATCH 01/21] ARM: shmobile: Lager: conditionally select CONFIG_MICREL_PHY   Simon Horman
• [PATCH 02/21] ARM: shmobile: bockw: use SSI DMAEngine for sound   Simon Horman
• [PATCH 03/21] ARM: shmobile: bockw: use HPBIF DMAEngine for sound   Simon Horman
• [PATCH 04/21] ARM: shmobile: bockw: add USB Func DMAEngine support   Simon Horman
• [PATCH 05/21] ARM: shmobile: koelsch: Conditionally select MICREL_PHY for Multiplatform   Simon Horman
• [PATCH 06/21] ARM: mach-shmobile: kzm9g: add zboot support   Simon Horman
• [PATCH 07/21] ARM: shmobile: lager: Add VIN1 SoC camera support   Simon Horman
• [PATCH 08/21] ARM: shmobile: kzm9d: Use common clock framework   Simon Horman
• [PATCH 09/21] ARM: shmobile: lager: Make spi_flash_data const   Simon Horman
• [PATCH 10/21] ARM: shmobile: lager: Add SATA support   Simon Horman
• [PATCH 11/21] ARM: shmobile: koelsch: Add SATA0 support   Simon Horman
• [PATCH 12/21] ARM: shmobile: ape6evm: Conditionally select SMSC_PHY   Simon Horman
• [PATCH 13/21] ARM: shmobile: armadillo800eva: Conditionally select SMSC_PHY   Simon Horman
• [PATCH 14/21] ARM: shmobile: bockw: Sort Kconfig node's selections   Simon Horman
• [PATCH 15/21] ARM: shmobile: kzm9d: Conditionally select SMSC_PHY   Simon Horman
• [PATCH 16/21] ARM: shmobile: mackerel: Conditionally select SMSC_PHY   Simon Horman
• [PATCH 17/21] ARM: shmobile: marzen: Conditionally select SMSC_PHY   Simon Horman
• [PATCH 18/21] ARM: shmobile: lager: fix error return code check from clk_get()   Simon Horman
• [PATCH 19/21] ARM: shmobile: koelsch: fix error return code check from clk_get()   Simon Horman
• [PATCH 20/21] ARM: shmobile: lager: Add USBHS support   Simon Horman
• [PATCH 21/21] ARM: shmobile: Remove Lager USBHS UDC ifdefs   Simon Horman
• [GIT PULL 0/3] Renesas ARM Based SoC Clean-Ups for v3.15   Simon Horman
• [PATCH 1/3] ARM: shmobile: Remove duplicate shmobile_invalidate_start() declaration   Simon Horman
• [PATCH 2/3] ARM: shmobile: r8a7779: Remove unused clock constants   Simon Horman
• [PATCH 3/3] ARM: shmobile: emev2: Use __initconst for const init definition   Simon Horman
• [PATCH 01/13] ARM: shmobile: lager: Enable VIN along with ADV7180 decoder in defconfig   Simon Horman
• [PATCH 02/13] ARM: shmobile: koelsch: Enable SATA in defconfig   Simon Horman
• [PATCH 03/13] ARM: shmobile: koelsch: Enable DEVTMPFS_MOUNT in defconfig   Simon Horman
• [PATCH 04/13] ARM: shmobile: lager: Enable SATA in defconfig   Simon Horman
• [PATCH 05/13] ARM: shmobile: marzen: enable CONFIG_DEVTMPFS in defconfig   Simon Horman
• [PATCH 06/13] ARM: shmobile: mackerel: enable CONFIG_DEVTMPFS in defconfig   Simon Horman
• [PATCH 07/13] ARM: shmobile: lager: enable CONFIG_DEVTMPFS in defconfig   Simon Horman
• [GIT PULL 00/13] Renesas ARM based SoC Defconfig Updates for v3.15   Simon Horman
• [PATCH 08/13] ARM: shmobile: kzm9g: enable CONFIG_DEVTMPFS in defconfig   Simon Horman
• [PATCH 09/13] ARM: shmobile: kzm9d: enable CONFIG_DEVTMPFS in defconfig   Simon Horman
• [PATCH 10/13] ARM: shmobile: genmai: enable CONFIG_DEVTMPFS in defconfig   Simon Horman
• [PATCH 11/13] ARM: shmobile: bockw: enable CONFIG_DEVTMPFS in defconfig   Simon Horman
• [PATCH 12/13] ARM: shmobile: armadillo: enable CONFIG_DEVTMPFS in defconfig   Simon Horman
• [PATCH 13/13] ARM: shmobile: ape6evm: enable CONFIG_DEVTMPFS in defconfig   Simon Horman
• [PATCH 01/17] ARM: shmobile: dts: Remove r8a7791-koelsch-reference.dts   Simon Horman
• [PATCH 02/17] ARM: shmobile: Add GPIO keys to Koelsch DTS   Simon Horman
• [PATCH 03/17] ARM: shmobile: koelsch: (1+1)GiB memory in DT   Simon Horman
• [PATCH 04/17] ARM: shmobile: r8a7791: Add thermal clock in device tree   Simon Horman
• [PATCH 05/17] ARM: shmobile: r8a7790: Add thermal clock in device tree   Simon Horman
• [PATCH 06/17] ARM: shmobile: r8a7791: Add serial ports to the device tree   Simon Horman
• [PATCH 07/17] ARM: shmobile: r8a7790: Add serial ports to the device tree   Simon Horman
• [PATCH 08/17] ARM: shmobile: r8a7790: Add VIN clocks to device tree   Simon Horman
• [PATCH 09/17] ARM: shmobile: r8a7791: Add VIN clocks to device tree   Simon Horman
• [PATCH 10/17] ARM: shmobile: r8a7790: Add SATA clocks to device tree   Simon Horman
• [PATCH 11/17] ARM: shmobile: r8a7791: Add SATA clocks to device tree   Simon Horman
• [PATCH 12/17] ARM: shmobile: r8a7791: Add SATA nodes to r8a7791.dtsi   Simon Horman
• [PATCH 13/17] ARM: shmobile: koelsch: Enable SATA0 in r8a7791-koelsch.dts   Simon Horman
• [PATCH 14/17] ARM: shmobile: r8a7790: Add SATA nodes to r8a7790.dtsi   Simon Horman
• [PATCH 15/17] ARM: shmobile: lager: Enable SATA1 in r8a7790-lager.dts   Simon Horman
• [GIT PULL 00/17] Renesas ARM Based SoC DT Updates for v3.15   Simon Horman
• [PATCH 16/17] ARM: shmobile: r8a7790: Fix serial ports DT compatible strings   Simon Horman
• [PATCH 17/17] ARM: shmobile: r8a7790: Replace IRQ type numerical values with macros   Simon Horman
• [PATCH 01/13] ARM: shmobile: r8a7779: Wait for status on selected MSTP clocks   Simon Horman
• [PATCH 02/13] ARM: shmobile: r8a7790: Wait for status on all MSTP clocks   Simon Horman
• [PATCH 03/13] ARM: shmobile: r8a7791: Add I2C clocks   Simon Horman
• [PATCH 04/13] ARM: shmobile: r8a7791: Add VIN clocks   Simon Horman
• [PATCH 05/13] ARM: shmobile: r8a7791: Wait for status on all MSTP clocks   Simon Horman
• [PATCH 06/13] ARM: shmobile: r8a7790: add Audio DMAC clock   Simon Horman
• [PATCH 07/13] ARM: shmobile: r8a7790: add Audio DMAC support   Simon Horman
• [PATCH 08/13] ARM: shmobile: r8a7790: Add VIN clock support   Simon Horman
• [GIT PULL 00/13] Renesas ARM Based SoC Updates for v3.15   Simon Horman
• [PATCH 09/13] ARM: shmobile: r8a7790: Add SATA clocks   Simon Horman
• [PATCH 10/13] ARM: shmobile: r8a7791: Add ZS clock   Simon Horman
• [PATCH 11/13] ARM: shmobile: r8a7791: Add SATA clocks   Simon Horman
• [PATCH 12/13] ARM: shmobile: r7s72100: really add i2c clocks   Simon Horman
• [PATCH 13/13] ARM: shmobile: r8a7790: Add PCI USB host clock support   Simon Horman
• [PATCH 02/03] pinctrl: sh-pfc: r8a7790: Break out USB0 OVC/VBUS   Simon Horman
• [PATCH] ARM: shmobile: Use 64-bit dma_addr_t on r8a7790/r8a7791   Simon Horman
• [PATCH 0/2] Add Ether's PHY IRQ support for Lager/Koelsh boards   Simon Horman
• [PATCH 0/2] sh_sci updates for v3.15   Simon Horman
• [PATCH 1/2] serial: sh-sci: Restrict non-COMPILE_TEST compilation   Simon Horman
• [PATCH 2/2] serial: sh-sci: Fix compatible string in DT bindings example   Simon Horman
• [PATCH 03/03] ARM: shmobile: Lager USB0 cable detection workaround   Simon Horman
• [PATCH] ARM: shmobile: Break out R-Car SYSC PM code   Simon Horman
• [PATCH 00/04] ARM: shmobile: r8a7790 SYSC, SCU and CCI setup code   Simon Horman
• [PATCH v8 0/4] Add ethernet support for r7s72100   Simon Horman
• [PATCH v8 1/2] ARM: shmobile: r7s72100: Add clock for r7s72100-ether   Simon Horman
• [PATCH v8 2/2] ARM: shmobile: genmai: Enable r7s72100-ether   Simon Horman
• [PATCH 0/8] ARM: shmobile: Conditionally select SMSC_PHY   Simon Horman
• [PATCH 00/11] ARM: shmobile: RSPI RZ and QSPI SoC and board integration   Simon Horman
• [PATCH 02/03] pinctrl: sh-pfc: r8a7790: Break out USB0 OVC/VBUS   Simon Horman
• [PATCH v8 2/2] ARM: shmobile: genmai: Enable r7s72100-ether   Simon Horman
• [PATCH v8 1/2] ARM: shmobile: r7s72100: Add clock for r7s72100-ether   Simon Horman
• [PATCH] ARM: shmobile: r8a7790: Correct SYS DMAC clock defines   Simon Horman
• [PATCH 02/03] pinctrl: sh-pfc: r8a7790: Break out USB0 OVC/VBUS   Simon Horman
• [PATCH] ARM: shmobile: set proper DMA masks for Ether devices   Simon Horman
• [PATCH] ARM: shmobile: set proper DMA masks for Ether devices   Simon Horman
• [PATCH] ARM: shmobile: koelsch: Enable SDHI in defconfig   Simon Horman
• [PATCH 0/7] ARM: shmobile: r8a7790/Lager QSPI SoC/board integration   Simon Horman
• [PATCH] ARM: shmobile: Remove legacy r8a7790 DT clocks   Simon Horman
• [PATCH] ARM: shmobile: r8a7778 dtsi: Remove duplicate i2c nodes   Simon Horman
• [PATCH 0/2] Add Ether DT support for R8A7790/Lager reference board   Simon Horman
• [PATCH 0/2] Add Ether DT support for R8A7791/Koelsch reference board   Simon Horman
• [PATCH] ARM: shmobile: koelsch: Enable SDHI, GPIO and regulators in defconfig   Simon Horman
• [PATCH 01/11] ARM: shmobile: Lager: pass Ether PHY IRQ   Simon Horman
• [PATCH 02/11] ARM: shmobile: Koelsch: pass Ether PHY IRQ   Simon Horman
• [PATCH 03/11] ARM: shmobile: koelsch: Add I2C support   Simon Horman
• [PATCH 04/11] ARM: shmobile: bockw: use wp-gpios instead of WP pin   Simon Horman
• [PATCH 05/11] ARM: shmobile: Lager USB0 cable detection workaround   Simon Horman
• [GIT PULL 00/11] Second Round of Renesas ARM Based SoC Board Updates for v3.15   Simon Horman
• [PATCH 06/11] ARM: shmobile: lager: add sound support   Simon Horman
• [PATCH 07/11] Revert "ARM: shmobile: marzen: Conditionally select SMSC_PHY"   Simon Horman
• [PATCH 08/11] ARM: shmobile: genmai legacy: Add RSPI support   Simon Horman
• [PATCH 09/11] ARM: shmobile: koelsch legacy: Add QSPI support   Simon Horman
• [PATCH 10/11] ARM: shmobile: lager legacy: Switch QSPI to named IRQs   Simon Horman
• [PATCH 11/11] ARM: shmobile: genmai: Enable r7s72100-ether   Simon Horman
• [GIT PULL 0/4] Second Round of Renesas ARM Based SoC Defconfig Updates for v3.15   Simon Horman
• [PATCH 1/4] ARM: shmobile: koelsch: Enable I2C in defconfig   Simon Horman
• [PATCH 2/4] ARM: shmobile: lager: add sound support on defconfig   Simon Horman
• [PATCH 3/4] ARM: shmobile: koelsch defconfig: Enable RSPI and MTD_M25P80   Simon Horman
• [PATCH 4/4] ARM: shmobile: genmai defconfig: Enable RSPI   Simon Horman
• [PATCH 1/3] ARM: shmobile: r7s72100 dtsi: Add RSPI nodes   Simon Horman
• [GIT PULL 0/3] Second Round of Renesas ARM Based SoC DT Updates for v3.15   Simon Horman
• [PATCH 2/3] ARM: shmobile: r8a7791 dtsi: Add QSPI node   Simon Horman
• [PATCH 3/3] ARM: shmobile: koelsch dts: Add QSPI nodes   Simon Horman
• [GIT PULL 00/12] Second Round of Renesas ARM Based SoC Updates for v3.15   Simon Horman
• [PATCH 01/12] ARM: shmobile: Use 64-bit dma_addr_t on r8a7790/r8a7791   Simon Horman
• [PATCH 02/12] ARM: shmobile: Break out R-Car SYSC PM code   Simon Horman
• [PATCH 03/12] ARM: shmobile: r8a7790 SYSC setup code   Simon Horman
• [PATCH 04/12] ARM: shmobile: r8a7790 CA7-SCU enablement   Simon Horman
• [PATCH 05/12] ARM: shmobile: r8a7790 CA15-SCU enablement   Simon Horman
• [PATCH 06/12] ARM: shmobile: r8a7778: add audio clock in new style   Simon Horman
• [PATCH 07/12] ARM: shmobile: r8a7790: add audio clock   Simon Horman
• [PATCH 08/12] ARM: shmobile: r7s72100 clock: Add RSPI clocks   Simon Horman
• [PATCH 09/12] ARM: shmobile: r7s72100 clock: Add RSPI clocks for DT   Simon Horman
• [PATCH 10/12] ARM: shmobile: r8a7791 clock: add QSPI clocks   Simon Horman
• [PATCH 11/12] ARM: shmobile: r7s72100: Add clock for r7s72100-ether   Simon Horman
• [PATCH 12/12] ARM: shmobile: r8a7790: Correct SYS DMAC clock defines   Simon Horman
• [PATCH/RFC] ARM: shmobile: Add defconfig for shmobile mulitplatfom   Simon Horman
• [PATCH/RFC] ARM: shmobile: Add defconfig for shmobile mulitplatfom   Simon Horman
• [PATCH v2] ARM: shmobile: Add defconfig for shmobile mulitplatfom   Simon Horman
• [PATCH v3] ARM: shmobile: Add defconfig for shmobile mulitplatfom   Simon Horman
• [PATCH v4] ARM: shmobile: Add defconfig for shmobile mulitplatfom   Simon Horman
• [PATCH 02/03] ARM: shmobile: Remove KZM9D board code   Simon Horman
• [PATCH/RFC] ARM: shmobile: Add defconfig for shmobile mulitplatfom   Simon Horman
• [PATCH 02/03] ARM: shmobile: Remove KZM9D board code   Simon Horman
• [PATCH] ARM: shmobile: lager: Add internal USB PCI support   Simon Horman
• [PATCH 0/5] enable i2c on koelsch-dt (and cleanup lager)   Simon Horman
• [PATCH 0/5] Set Ether device's DMA masks on SH-Mobile boards   Simon Horman
• [PATCH 01/03] ARM: shmobile: Remove legacy EMEV2 SoC support   Simon Horman
• [PATCH 03/03] ARM: shmobile: Get rid of legacy KZM9D defconfig   Simon Horman
• [PATCH v4] ARM: shmobile: Add defconfig for shmobile mulitplatfom   Simon Horman
• [PATCH] ARM: shmobile: koelsch: Enable SDHI, GPIO and regulators in defconfig   Simon Horman
• [PATCH] ARM: shmobile: Check MD21 at SMP boot in case of APMU   Simon Horman
• [PATCH v2] ARM: shmobile: Remove KZM9D board code   Simon Horman
• [PATCH] ARM: shmobile: Remove EMEV2 header file   Simon Horman
• [PATCH] ARM: shmobile: Remove Koelsch DT reference legacy clock bits   Simon Horman
• [PATCH] ARM: shmobile: Remove Lager DT reference legacy clock bits   Simon Horman
• [PATCH] ARM: shmobile: Remove __init from rcar_gen2_read_mode_pins()   Simon Horman
• [PATCH 15/15] sh: intc: Enable driver compilation with COMPILE_TEST   Simon Horman
• [PATCH V2 1/2] ARM: shmobile: r8a7791: add i2c master nodes to dtsi   Simon Horman
• [PATCH V2 2/2] ARM: shmobile: r8a7791: add i2c2 bus to koelsch dt   Simon Horman
• [PATCH] ARM: shmobile: Remove EMEV2 header file   Simon Horman
• [PATCH 01/03] ARM: shmobile: Remove legacy EMEV2 SoC support   Simon Horman
• [PATCH 0/2] Add Ether DT support for R8A7790/Lager reference board   Simon Horman
• [GIT PULL 00/12] Second Round of Renesas ARM Based SoC Updates for v3.15   Simon Horman
• [GIT PULL] Renesas intc Updates for v3.15   Simon Horman
• [PATCH] sh: intc: Enable driver compilation with COMPILE_TEST   Simon Horman
• [PATCH 01/16] ARM: shmobile: Add SDHI devices for legacy Koelsch   Simon Horman
• [PATCH 02/16] ARM: shmobile: lager: add SDHI0/2 support   Simon Horman
• [PATCH 03/16] ARM: shmobile: lager legacy: Add QSPI pinmux   Simon Horman
• [PATCH 04/16] ARM: shmobile: lager: Add internal USB PCI support   Simon Horman
• [PATCH 05/16] ARM: shmobile: lager-reference: Refactor clock lookup hack   Simon Horman
• [PATCH 06/16] ARM: shmobile: lager-reference: Add DU device   Simon Horman
• [PATCH 07/16] ARM: shmobile: koelsch-reference: Refactor clock lookup hack   Simon Horman
• [PATCH 08/16] ARM: shmobile: koelsch-reference: Add DU device   Simon Horman
• [PATCH 09/16] ARM: shmobile: Armadillo 800 EVA: set proper DMA masks for Ether device   Simon Horman
• [PATCH 10/16] ARM: shmobile: BOCK-W: set proper DMA masks for Ether device   Simon Horman
• [PATCH 11/16] ARM: shmobile: Lager: set proper DMA masks for Ether device   Simon Horman
• [PATCH 12/16] ARM: shmobile: Koelsch: set proper DMA masks for Ether device   Simon Horman
• [PATCH 13/16] ARM: shmobile: Genmai: set proper DMA masks for Ether device   Simon Horman
• [GIT PULL] Third Round of Renesas ARM Based SoC Boards Updates for v3.15   Simon Horman
• [PATCH 14/16] ARM: shmobile: Remove KZM9D board code   Simon Horman
• [PATCH 15/16] ARM: shmobile: Remove Koelsch DT reference legacy clock bits   Simon Horman
• [PATCH 16/16] ARM: shmobile: Remove Lager DT reference legacy clock bits   Simon Horman
• [PATCH 1/5] ARM: shmobile: lager defconfig: Enable RSPI and MTD_M25P80   Simon Horman
• [PATCH 2/5] ARM: shmobile: Add defconfig for shmobile multiplatform   Simon Horman
• [PATCH 3/5] ARM: shmobile: Get rid of legacy KZM9D defconfig   Simon Horman
• [GIT PULL] Third Round of Renesas ARM Based SoC Defconfig Updates for v3.15   Simon Horman
• [PATCH 4/5] ARM: shmobile: koelsch: Enable SDHI, GPIO and regulators in defconfig   Simon Horman
• [PATCH 5/5] ARM: shmobile: r7s72100: update defconfig for I2C usage   Simon Horman
• [PATCH 01/13] ARM: shmobile: r8a7790 dtsi: Add QSPI node   Simon Horman
• [PATCH 02/13] ARM: shmobile: lager dts: Add QSPI nodes   Simon Horman
• [PATCH 03/13] ARM: shmobile: lager: add SDHI0/2 support on DTS   Simon Horman
• [PATCH 04/13] ARM: shmobile: r8a7778 dtsi: Remove duplicate i2c nodes   Simon Horman
• [PATCH 05/13] ARM: shmobile: lager: Add DU device to DTS   Simon Horman
• [PATCH 06/13] ARM: shmobile: koelsch-reference: Add DU device to DTS   Simon Horman
• [PATCH 07/13] ARM: shmobile: r8a7791: remove superfluous interrupt-parents   Simon Horman
• [PATCH 08/13] ARM: shmobile: r8a7790: remove superfluous interrupt-parents   Simon Horman
• [PATCH 09/13] ARM: shmobile: r8a7790: add i2c aliases to dtsi   Simon Horman
• [PATCH 10/13] ARM: shmobile: r8a7791: add i2c master nodes to dtsi   Simon Horman
• [GIT PULL] Third Round of Renesas ARM Based SoC DT Updates for v3.15   Simon Horman
• [PATCH 11/13] ARM: shmobile: r8a7791: add i2c2 bus to koelsch dt   Simon Horman
• [PATCH 12/13] ARM: shmobile: r7s72100: add nodes for i2c controllers to dtsi   Simon Horman
• [PATCH 13/13] ARM: shmobile: genmai: adapt dts to use native i2c driver   Simon Horman
• [PATCH 1/3] ARM: shmobile: Add r8a7791 legacy SDHI clocks   Simon Horman
• [PATCH 2/3] ARM: shmobile: Remove legacy r8a7790 DT clocks   Simon Horman
• [GIT PULL] Third Round of Renesas ARM Based SoC Updates for v3.15   Simon Horman
• [PATCH 3/3] ARM: shmobile: Remove __init from rcar_gen2_read_mode_pins()   Simon Horman
• [GIT PULL 00/12] Second Round of Renesas ARM Based SoC Updates for v3.15   Simon Horman
• [PATCH v2 1/2] ARM: shmobile: r8a7778/r8a7779 dtsi: Improve and correct HSPI bindings   Simon Horman
• [PATCH v2 2/2] ARM: shmobile: bockw reference dts: Add SPI FLASH   Simon Horman
• [PATCH v2 0/2] Add Ether DT support for R8A7790/Lager reference board   Simon Horman
• [PATCH v2 0/2] Add Ether DT support for R8A7791/Koelsch reference board   Simon Horman
• [PATCH v2 1/2] ARM: shmobile: r8a7778/r8a7779 dtsi: Improve and correct HSPI bindings   Simon Horman
• [PATCH] ARM: shmobile: Move SYSC base variable to inside ifdefs   Simon Horman
• [PATCH v3 00/20] ARM: shmobile: r8a7779, marzen: CCF and multiplatform   Simon Horman
• [PATCH v3 01/20] clk: shmobile: r8a7779: Add clocks support   Simon Horman
• [PATCH v3 02/20] clk: shmobile: r8a7779: Add MSTP clock support   Simon Horman
• [PATCH v3 03/20] ARM: shmobile: r8a7779: Add clock index macros for DT sources   Simon Horman
• [PATCH v3 04/20] ARM: shmobile: r8a7779: Add clocks   Simon Horman
• [PATCH v3 05/20] ARM: shmobile: Sync Marzen DTS with Marzen reference DTS   Simon Horman
• [PATCH v3 06/20] ARM: shmobile: marzen: Specify external clock frequency in DT   Simon Horman
• [PATCH v3 07/20] ARM: shmobile: marzen: Reference clocks   Simon Horman
• [PATCH v3 08/20] ARM: shmobile: r8a7779: Reference clocks   Simon Horman
• [PATCH v3 09/20] ARM: shmobile: r8a7779: Add helper to read mode pins   Simon Horman
• [PATCH v3 10/20] ARM: shmobile: r8a7779: Move r8a7779_earlytimer_init to clock-r8a7779.c   Simon Horman
• [PATCH v3 11/20] ARM: shmobile: marzen-reference: Move clock and OF device initialisation into board code   Simon Horman
• [PATCH v3 12/20] ARM: shmobile: r8a7779: Do not include sh_clk.h in r8a7779.h   Simon Horman
• [PATCH v3 13/20] ARM: shmobile: r8a7779: Initial multiplatform support   Simon Horman
• [PATCH v3 14/20] ARM: shmobile: marzen-reference: Initialize CPG device   Simon Horman
• [PATCH v3 15/20] ARM: shmobile: marzen-reference: Instantiate clkdevs for SCIF and TMU   Simon Horman
• [PATCH v3 16/20] ARM: shmobile: marzen: Add to shmobile defconfig   Simon Horman
• [PATCH v3 17/20] ARM: shmobile: Remove non-multiplatform Marzen reference support   Simon Horman
• [PATCH v3 18/20] ARM: shmobile: Let Marzen multiplatform boot with Marzen DTB   Simon Horman
• [PATCH v3 19/20] ARM: shmobile: Remove Marzen reference DTS   Simon Horman
• [PATCH v3 20/20] ARM: shmobile: marzen-reference: Remove legacy clock support   Simon Horman
• [PATCH 1/9] ARM: shmobile: r8a7778: add audio clock in new style   Simon Horman
• [PATCH 2/9] ARM: shmobile: r8a7790: add audio clock   Simon Horman
• [PATCH 3/9] ARM: shmobile: r7s72100 clock: Add RSPI clocks   Simon Horman
• [PATCH 4/9] ARM: shmobile: r7s72100 clock: Add RSPI clocks for DT   Simon Horman
• [PATCH 5/9] ARM: shmobile: r8a7791 clock: add QSPI clocks   Simon Horman
• [PATCH 6/9] ARM: shmobile: r7s72100: Add clock for r7s72100-ether   Simon Horman
• [GIT PULL 0/9] Renesas ARM Based SoC Clock Updates for v3.15   Simon Horman
• [PATCH 7/9] ARM: shmobile: r8a7790: Correct SYS DMAC clock defines   Simon Horman
• [PATCH 8/9] ARM: shmobile: Add r8a7791 legacy SDHI clocks   Simon Horman
• [PATCH 9/9] ARM: shmobile: Remove legacy r8a7790 DT clocks   Simon Horman
• [PATCH 1/7] ARM: shmobile: Use 64-bit dma_addr_t on r8a7790/r8a7791   Simon Horman
• [PATCH 2/7] ARM: shmobile: Break out R-Car SYSC PM code   Simon Horman
• [PATCH 3/7] ARM: shmobile: r8a7790 SYSC setup code   Simon Horman
• [PATCH 4/7] ARM: shmobile: r8a7790 CA7-SCU enablement   Simon Horman
• [PATCH 5/7] ARM: shmobile: r8a7790 CA15-SCU enablement   Simon Horman
• [GIT PULL v2 0/7] Second Round of Renesas ARM Based SoC Updates for v3.15   Simon Horman
• [PATCH 6/7] ARM: shmobile: Remove __init from rcar_gen2_read_mode_pins()   Simon Horman
• [PATCH 7/7] ARM: shmobile: Move SYSC base variable to inside ifdefs   Simon Horman
• [PATCH v3 04/20] ARM: shmobile: r8a7779: Add clocks   Simon Horman
• [PATCH v3 15/20] ARM: shmobile: marzen-reference: Instantiate clkdevs for SCIF and TMU   Simon Horman
• [PATCH v3 20/20] ARM: shmobile: marzen-reference: Remove legacy clock support   Simon Horman
• [PATCH v3 01/20] clk: shmobile: r8a7779: Add clocks support   Simon Horman
• [PATCH v3 01/20] clk: shmobile: r8a7779: Add clocks support   Simon Horman
• [PATCH 4/4] ARM: Delete asm/system.h   David Howells
• [PATCH] ARM: Delete asm/system.h   David Howells
• [PATCH] ARM: imx: avoid calling clk APIs in idle thread which may cause schedule   Anson Huang
• [PATCH] ARM: imx: avoid calling clk APIs in idle thread which may cause schedule   Anson Huang
• [PATCH V2] ARM: imx: avoid calling clk APIs in idle thread which may cause schedule   Anson Huang
• [PATCH 1/2] ARM: dts: imx6q: add 852MHz setpoint for CPU freq   Anson Huang
• [PATCH 2/2] ARM: imx: add speed grading check for i.mx6 soc   Anson Huang
• [PATCH V2 1/2] ARM: dts: imx6q: add 852MHz setpoint for CPU freq   Anson Huang
• [PATCH V2 2/2] ARM: imx: add speed grading check for i.mx6 soc   Anson Huang
• [PATCH 1/2] ARM: dts: add device tree source for imx6sx SoC   Anson Huang
• [PATCH 2/2] ARM: dts: imx6sx: add initial imx6sx sdb support   Anson Huang
• [RFC] ARM VM System Sepcification   Michael Hudson-Doyle
• [PATCH v3 3/5] ARM: qcom: Split Qualcomm support into legacy and multiplatform   Bryan Huntsman
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Ben Hutchings
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Ben Hutchings
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Ben Hutchings
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Ben Hutchings
• [PATCH V4 4/8] phy: st-miphy-40lp: Add skeleton driver   Kishon Vijay Abraham I
• [PATCH V4 4/8] phy: st-miphy-40lp: Add skeleton driver   Kishon Vijay Abraham I
• [PATCH V4 5/8] SPEAr13xx: Fixup: Move SPEAr1340 SATA platform code to phy driver   Kishon Vijay Abraham I
• [PATCH V4 5/8] SPEAr13xx: Fixup: Move SPEAr1340 SATA platform code to phy driver   Kishon Vijay Abraham I
• [PATCH V6 06/12] SPEAr13xx: Fixup: Move SPEAr1340 SATA platform code to phy driver   Kishon Vijay Abraham I
• [PATCH V6 07/12] phy: st-miphy-40lp: Add SPEAr1310 and SPEAr1340 PCIe phy support   Kishon Vijay Abraham I
• [PATCH 1/2] usb: dwc3: core: continue probing if usb phy library returns -ENODEV/-ENXIO   Kishon Vijay Abraham I
• [PATCH 4/4] phy: miphy365x: Provide support for the MiPHY356x Generic PHY   Kishon Vijay Abraham I
• [Patch v3 18/23] drivers: Enable building of Kirkwood drivers for mach-mvebu   Kishon Vijay Abraham I
• [PATCH 1/2] usb: dwc3: core: continue probing if usb phy library returns -ENODEV/-ENXIO   Kishon Vijay Abraham I
• [PATCH v3 0/4] ARM: sunxi: Add driver for sunxi usb phy + usb dts bindings   Kishon Vijay Abraham I
• [PATCH v3 1/4] ARM: sunxi: Add driver for sunxi usb phy   Kishon Vijay Abraham I
• [PATCH 1/2] usb: dwc3: core: continue probing if usb phy library returns -ENODEV/-ENXIO   Kishon Vijay Abraham I
• [PATCH 1/2] usb: dwc3: core: continue probing if usb phy library returns -ENODEV/-ENXIO   Kishon Vijay Abraham I
• [PATCH V8 1/2] PHY: Exynos: Add Exynos5250 SATA PHY driver   Kishon Vijay Abraham I
• [PATCH 1/2] usb: dwc3: core: continue probing if usb phy library returns -ENODEV/-ENXIO   Kishon Vijay Abraham I
• [PATCH v13 3/3] arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries   Kishon Vijay Abraham I
• [PATCH RESEND v10 1/4] PHY: Add function set_speed to generic PHY framework   Kishon Vijay Abraham I
• [PATCH RESEND v10 1/4] PHY: Add function set_speed to generic PHY framework   Kishon Vijay Abraham I
• [PATCH RESEND v10 2/4] Documentation: Add APM X-Gene SoC 15Gbps Multi-purpose PHY driver binding documentation   Kishon Vijay Abraham I
• [PATCH RESEND v10 3/4] PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver   Kishon Vijay Abraham I
• [PATCH RESEND v10 3/4] PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver   Kishon Vijay Abraham I
• [PATCH RESEND v10 3/4] PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver   Kishon Vijay Abraham I
• [PATCH RESEND v10 3/4] PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver   Kishon Vijay Abraham I
• [PATCH RESEND v10 3/4] PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver   Kishon Vijay Abraham I
• [PATCH] clk:at91: Fix memory leak in of_at91_clk_master_setup()   Masanari Iida
• [PATCH] clk:ti: Fix memory leak in of_ti_composite_divider_clk_setup()   Masanari Iida
• [RFC PATCH V3 1/4] pci: APM X-Gene PCIe controller driver   Tanmay Inamdar
• [RFC PATCH V3 1/4] pci: APM X-Gene PCIe controller driver   Tanmay Inamdar
• [PATCH] pci: Add support for creating a generic host_bridge from device tree   Tanmay Inamdar
• [PATCH] pci: Add support for creating a generic host_bridge from device tree   Tanmay Inamdar
• [PATCH] pci: Add support for creating a generic host_bridge from device tree   Tanmay Inamdar
• [PATCH] pci: Add support for creating a generic host_bridge from device tree   Tanmay Inamdar
• [PATCH v3 5/5] pci: Add support for creating a generic host_bridge from device tree   Tanmay Inamdar
• [PATCH] clk: qcom: Add missing clock at index GCC_XO_CLK for MSM8974   Ivan T. Ivanov
• [PATCH] clk: qcom: Add missing clock at index GCC_XO_CLK for MSM8974   Ivan T. Ivanov
• [PATCH v3 2/2] i2c: New bus driver for the Qualcomm QUP I2C controller   Ivan T. Ivanov
• NFS client broken in Linus' tip   Takashi Iwai
• NFS client broken in Linus' tip   Takashi Iwai
• [PATCH 1/2] ALSA: hda/ca0132 - setup/cleanup streams   Takashi Iwai
• [PATCH 2/2] ALSA: hda/ca0132 - Fix recording from mode id 0x8   Takashi Iwai
• [PATCH 1/2] ALSA: hda/ca0132 - setup/cleanup streams   Takashi Iwai
• [PATCH 1/2] ALSA: hda/ca0132 - setup/cleanup streams   Takashi Iwai
• change kmalloc into vmalloc for large memory allocations   Takashi Iwai
• [PATCH v3] pwm: add CSR SiRFSoC PWM driver   Romain Izard
• [PATCH v3] pwm: add CSR SiRFSoC PWM driver   Romain Izard
• [PATCH v3] pwm: add CSR SiRFSoC PWM driver   Romain Izard
• [PATCH v3] pwm: add CSR SiRFSoC PWM driver   Romain Izard
• [PATCH v3] pwm: add CSR SiRFSoC PWM driver   Romain Izard
• [PATCH] ARM: pxa: Add dummy backlight power supply on Mitac Mio A701   Robert Jarzmik
• [PATCH V3 2/2] ARM: multi_v7_defconfig: add mvebu drivers   Olof Johansson
• arm-soc for-next branch reset; not all late contents made it in for 3.14   Olof Johansson
• [PATCH] ARM: hisi: don't select SMP   Olof Johansson
• [GIT PULL] ARM: SoC "fixes" for 3.14-rc1   Olof Johansson
• [PATCH 0/3] kconfig selection fixes   Olof Johansson
• [PATCH] dma: mv_xor: Silence a bunch of LPAE-related warnings   Olof Johansson
• [RFC/RFT 2/2] ARM: keystone: Install hooks for dma address translation routines   Olof Johansson
• [RFC/RFT 1/2] ARM: mm: introduce arch hooks for dma address translation routines   Olof Johansson
• [RFC/RFT 2/2] ARM: keystone: Install hooks for dma address translation routines   Olof Johansson
• [PATCH] dma: mv_xor: Silence a bunch of LPAE-related warnings   Olof Johansson
• [PATCH] dma: mv_xor: Silence a bunch of LPAE-related warnings   Olof Johansson
• [PATCH] iommu/exynos: Remove driver   Olof Johansson
• [PATCH v2 00/12] Samsung PM consolidation part 2 (multiplatform)   Olof Johansson
• [PATCH 1/3] arm64: dts: add initial dts for Samsung GH7 SoC and SSDK-GH7 board   Olof Johansson
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Olof Johansson
• [PATCH v2 6/6] ARM: tegra: cpuidle: use firmware for power down   Olof Johansson
• [PATCH v2 0/6] ARM: firmware: improvements to Trusted Foundations support   Olof Johansson
• [RFC/PATCH 0/3] Add devicetree scanning for randomness   Olof Johansson
• [PATCH v3] ARM: tegra: cpuidle: use firmware for power down   Olof Johansson
• [PATCH] dma: mv_xor: Silence a bunch of LPAE-related warnings   Olof Johansson
• [PATCH 1/3] mmc: add support for power-on sequencing through DT   Olof Johansson
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Olof Johansson
• [PATCH] iommu/exynos: Remove driver   Olof Johansson
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Olof Johansson
• [PATCH] ARM64: unwind: Fix PC calculation   Olof Johansson
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Olof Johansson
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Olof Johansson
• [GIT PULL][for v3.14] pull request from pxa to fix PWM   Olof Johansson
• [PATCH] ARM: tegra: fix RTC0 alias for Cardhu   Olof Johansson
• [GIT PULL] omap fixes against v3.14-rc1   Olof Johansson
• [PATCH RESEND] ARM: imx6: build pm-imx6q.c independently of CONFIG_PM   Olof Johansson
• [GIT PULL] ARM: mvebu: DT fixes for v3.14   Olof Johansson
• [PATCH] ARM: tegra: Add head numbers to display controllers   Olof Johansson
• [PATCH] ARM: tegra: only run PL310 init on systems with one   Olof Johansson
• [GIT PULL v2] get rid of <mach/timex.h>   Olof Johansson
• [GIT PULL] ARM: mvebu: DT fixes for v3.14   Olof Johansson
• [GIT PULL] SOCFPGA DT updates for 3.14 - take 2   Olof Johansson
• [GIT PULL] SOCFPGA DT updates for 3.15   Olof Johansson
• [GIT PULL] Renesas CPG update for v3.15   Olof Johansson
• [GIT PULL 00/21] Renesas ARM based SoC Board Updates for v3.15   Olof Johansson
• [GIT PULL 0/3] Renesas ARM Based SoC Clean-Ups for v3.15   Olof Johansson
• [GIT PULL 00/13] Renesas ARM based SoC Defconfig Updates for v3.15   Olof Johansson
• [GIT PULL 00/17] Renesas ARM Based SoC DT Updates for v3.15   Olof Johansson
• [GIT PULL] Renesas CPG update for v3.15   Olof Johansson
• [GIT PULL 00/13] Renesas ARM Based SoC Updates for v3.15   Olof Johansson
• [GIT PULL v2] ARM: imx: i.MX6 DT changes for 3.15, take 1   Olof Johansson
• [GIT PULL v2] ARM: imx: device tree changes for 3.15, take 1   Olof Johansson
• [GIT PULL] qcom cleanups for v3.15   Olof Johansson
• [GIT PULL] Ux500 AB8500 DT conversion   Olof Johansson
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Olof Johansson
• [GIT PULL] qcom SoC changes for v3.15   Olof Johansson
• [GIT PULL 00/11] Second Round of Renesas ARM Based SoC Board Updates for v3.15   Olof Johansson
• [GIT PULL 0/4] Second Round of Renesas ARM Based SoC Defconfig Updates for v3.15   Olof Johansson
• [GIT PULL 0/3] Second Round of Renesas ARM Based SoC DT Updates for v3.15   Olof Johansson
• [PATCH] ARM: shmobile: Break out R-Car SYSC PM code   Olof Johansson
• [GIT PULL 00/12] Second Round of Renesas ARM Based SoC Updates for v3.15   Olof Johansson
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Olof Johansson
• linux-next: manual merge of the arm-soc tree with the arm-perf tree   Olof Johansson
• [GIT PULL 00/12] Second Round of Renesas ARM Based SoC Updates for v3.15   Olof Johansson
• [GIT PULL] bcm pinctrl rename   Olof Johansson
• [GIT PULL] integrator base patches for v3.15   Olof Johansson
• [GIT PULL] ARM: mvebu: DT changes for v3.15   Olof Johansson
• [GIT PULL] ARM: mvebu soc changes for v3.15   Olof Johansson
• [GIT PULL] ARM: mvebu: defconfig changes for v3.15   Olof Johansson
• [GIT PULL v2] efm32 cleanups for next   Olof Johansson
• linux-next: manual merge of the arm-soc tree with the arm-perf tree   Olof Johansson
• [GIT PULL] ARM: mvebu soc changes for v3.15   Olof Johansson
• [GIT PULL v2] efm32 cleanups for next   Olof Johansson
• [PATCH v2] MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer   Olof Johansson
• [GIT PULL] ARM: SoC fixes for v3.14-rc   Olof Johansson
• [PATCH 1/1] ARM: Exynos: Add generic compatible string   Olof Johansson
• linux-next: manual merge of the staging tree with the arm-soc tree   Olof Johansson
• [PATCH 02/18] mfd: max14577: Remove unused enum max14577_irq_source   Lee Jones
• [PATCH 03/18] mfd: max14577: Remove not needed header inclusion   Lee Jones
• [PATCH 04/18] mfd: max14577: Add of_compatible to extcon mfd_cell   Lee Jones
• [PATCH 05/18] mfd: max14577: Use of_match_ptr() in i2c_driver   Lee Jones
• [PATCH 07/18] mfd: max14577: Rename and add MAX14577 symbols to prepare for max77836   Lee Jones
• [PATCH 08/18] mfd: max14577: Rename state container to maxim_core   Lee Jones
• [PATCH 09/18] mfd: max14577: Add "muic" suffix to regmap and irq_chip   Lee Jones
• [PATCH 10/18] mfd: max14577: Add detection of device type   Lee Jones
• [PATCH 13/18] mfd: max77836: Add max77836 support to max14577 driver   Lee Jones
• [PATCH 14/18] extcon: max14577: Add support for max77836   Lee Jones
• [PATCH 15/18] regulator: max14577: Add support for max77836 regulators   Lee Jones
• [PATCH 16/18] charger: max14577: Add support for MAX77836 charger   Lee Jones
• [PATCH 2/3 RESEND] mfd: tc3589x: Reform device tree probing   Lee Jones
• [PATCH 2/3 RESEND] mfd: tc3589x: Reform device tree probing   Lee Jones
• [PATCH 3/6] mfd: add bcm59056 pmu driver   Lee Jones
• [PATCH 0/6] BCM59056 PMU regulator support   Lee Jones
• [PATCH 3/6] mfd: add bcm59056 pmu driver   Lee Jones
• [PATCH 3/6] mfd: add bcm59056 pmu driver   Lee Jones
• [PATCH 3/6] mfd: add bcm59056 pmu driver   Lee Jones
• [PATCH] ARM: ux500: disable msp2 device tree node   Lee Jones
• [PATCH 11/18] extcon: max14577: Add max14577 prefix to muic_irqs   Lee Jones
• [PATCH v2 14/15] charger: max14577: Configure battery-dependent settings from DTS   Lee Jones
• [PATCH v2 08/15] mfd: max77836: Add max77836 support to max14577 driver   Lee Jones
• [PATCH v2 08/15] mfd: max77836: Add max77836 support to max14577 driver   Lee Jones
• [PATCH v2 05/15] mfd: max14577: Add detection of device type   Lee Jones
• [PATCH v2 13/15] regulator/mfd: max14577: Export symbols for calculating charger current   Lee Jones
• [PATCH v2 08/15] mfd: max77836: Add max77836 support to max14577 driver   Lee Jones
• [PATCH v2 14/15] charger: max14577: Configure battery-dependent settings from DTS   Lee Jones
• [PATCH v2 13/15] regulator/mfd: max14577: Export symbols for calculating charger current   Lee Jones
• [PATCH 1/1] openfirmware: trivial: Standardise formatting of 'struct of_device_id' definition   Lee Jones
• [PATCH 3/3] mfd: axp20x: Add bindings documentation   Lee Jones
• [PATCH 2/3] mfd: axp20x: Add dtsi for axp20x   Lee Jones
• [PATCH 1/3] mfd: axp20x: Add mfd driver for axp20x PMIC   Lee Jones
• [linux-sunxi] Re: [PATCH 1/3] mfd: axp20x: Add mfd driver for axp20x PMIC   Lee Jones
• [PATCH v3 7/7] devicetree: bindings: Document PM8921/8058 PMICs   Lee Jones
• [linux-sunxi] Re: [PATCH 1/3] mfd: axp20x: Add mfd driver for axp20x PMIC   Lee Jones
• [PATCH 05/12] GPIO: gpio-generic: Add label to platform data   Lee Jones
• [PATCH 06/12] mfd: vexpress-sysreg: Add labels to gpio banks   Lee Jones
• [PATCH 07/12] mfd: syscon: Consider platform data a regmap config name   Lee Jones
• [PATCH 08/12] mfd: vexpress-sysreg: Add syscon labels as platform data   Lee Jones
• [PATCH 05/12] GPIO: gpio-generic: Add label to platform data   Lee Jones
• [PATCH 08/12] mfd: vexpress-sysreg: Add syscon labels as platform data   Lee Jones
• [PATCH 07/12] mfd: syscon: Consider platform data a regmap config name   Lee Jones
• [RFC PATCH 2/3] mfd: syscon: Support early initialization   Lee Jones
• [PATCH 07/12] mfd: syscon: Consider platform data a regmap config name   Lee Jones
• [PATCH v2 1/2] mfd: syscon: Add platform data with a regmap config name   Lee Jones
• [PATCH v2 2/2] mfd: vexpress-sysreg: Add syscon labels as platform data   Lee Jones
• [PATCH 1/4] phy: miphy365x: Add Device Tree bindings for the MiPHY365x   Lee Jones
• [PATCH 2/4] phy: miphy365x: Add MiPHY365x header file for DT x Driver defines   Lee Jones
• [PATCH 3/4] ARM: DT: STi: Add DT node for MiPHY365x   Lee Jones
• [PATCH 4/4] phy: miphy365x: Provide support for the MiPHY356x Generic PHY   Lee Jones
• [PATCH 1/1] mfd: max665x: Differentiate between MAX665X devices   Lee Jones
• [PATCH 4/4] phy: miphy365x: Provide support for the MiPHY356x Generic PHY   Lee Jones
• [PATCH 4/4] phy: miphy365x: Provide support for the MiPHY356x Generic PHY   Lee Jones
• [PATCH 1/4] phy: miphy365x: Add Device Tree bindings for the MiPHY365x   Lee Jones
• [PATCH v3 7/7] devicetree: bindings: Document PM8921/8058 PMICs   Lee Jones
• [PATCH] mfd: vexpress-sysreg: initialize "site" variable   Lee Jones
• [PATCH v7 01/12] mfd: omap-usb-host: Use resource managed clk_get()   Lee Jones
• [PATCH v7 02/12] mfd: omap-usb-host: Get clocks based on hardware revision   Lee Jones
• [PATCH v7 03/12] mfd: omap-usb-host: Use clock names as per function for reference clocks   Lee Jones
• [PATCH RESEND v4 00/37] mtd: st_spi_fsm: Add new driver   Lee Jones
• [PATCH 1/4] phy: miphy365x: Add Device Tree bindings for the MiPHY365x   Lee Jones
• [PATCH 2/4] phy: miphy365x: Add MiPHY365x header file for DT x Driver defines   Lee Jones
• [PATCH 3/4] ARM: DT: STi: Add DT node for MiPHY365x   Lee Jones
• [PATCH 4/4] phy: miphy365x: Provide support for the MiPHY356x Generic PHY   Lee Jones
• [PATCH v7 03/12] mfd: omap-usb-host: Use clock names as per function for reference clocks   Lee Jones
• [PATCH 1/2] mfd: twl4030-madc: Add devicetree support.   Lee Jones
• [PATCH 1/2] mfd: twl4030-madc: Add devicetree support.   Lee Jones
• [PATCH 1/2] mfd: palmas: support IRQ inversion at the board level   Lee Jones
• [PATCH v3 14/15] charger: max14577: Configure battery-dependent settings from DTS   Lee Jones
• [PATCH v3 14/15] charger: max14577: Configure battery-dependent settings from DTS   Lee Jones
• [PATCH 1/3] ahci: st: Provide DT bindings for ST's SATA implementation   Lee Jones
• [PATCH 2/3] ARM: DT: STi: Add DT node for ST's SATA device   Lee Jones
• [PATCH 3/3] ahci: st: Add support for ST's SATA IP   Lee Jones
• [PATCH v5 00/35] mtd: st_spi_fsm: Add new driver   Lee Jones
• [PATCH 01/35] mtd: st_spi_fsm: Allocate resources and register with MTD framework   Lee Jones
• [PATCH 02/35] mtd: st_spi_fsm: Supply all register address and bit logic defines   Lee Jones
• [PATCH 03/35] mtd: st_spi_fsm: Initialise and configure the FSM for normal working conditions   Lee Jones
• [PATCH 04/35] mtd: st_spi_fsm: Supply framework for device requests   Lee Jones
• [PATCH 05/35] mtd: st_spi_fsm: Supply a method to read from the FSM's FIFO   Lee Jones
• [PATCH 06/35] mtd: st_spi_fsm: Add support for JEDEC ID extraction   Lee Jones
• [PATCH 07/35] mtd: devices: Provide header for shared OPCODEs and SFDP commands   Lee Jones
• [PATCH 08/35] mtd: st_spi_fsm: Provide device look-up table   Lee Jones
• [PATCH 09/35] mtd: st_spi_fsm: Dynamically setup flash device based on JEDEC ID   Lee Jones
• [PATCH 10/35] mtd: st_spi_fsm: Search for preferred FSM message sequence configurations   Lee Jones
• [PATCH 11/35] mtd: st_spi_fsm: Use device size to determine address width   Lee Jones
• [PATCH 12/35] mtd: st_spi_fsm: Prepare the read/write FSM message sequence(s)   Lee Jones
• [PATCH 13/35] mtd: st_spi_fsm: Add device-tree binding documentation   Lee Jones
• [PATCH 14/35] mtd: st_spi_fsm: Fetch boot-device from mode pins   Lee Jones
• [PATCH 15/35] mtd: st_spi_fsm: Provide the erase one sector sequence   Lee Jones
• [PATCH 16/35] mtd: st_spi_fsm: Provide the sequence for enabling 32bit addressing mode   Lee Jones
• [PATCH 17/35] mtd: st_spi_fsm: Prepare read/write sequences according to configuration   Lee Jones
• [PATCH 18/35] mtd: st_spi_fsm: Add a check to if the chip can handle an SoC reset   Lee Jones
• [PATCH 19/35] mtd: st_spi_fsm: Provide a method to put the chip into 32bit addressing mode   Lee Jones
• [PATCH 20/35] mtd: st_spi_fsm: Update the flash Volatile Configuration Register   Lee Jones
• [PATCH 21/35] mtd: st_spi_fsm: Provide the default read/write configurations   Lee Jones
• [PATCH 22/35] mtd: st_spi_fsm: Supply the N25Qxxx specific read configurations   Lee Jones
• [PATCH 23/35] mtd: st_spi_fsm: Supply the N25Qxxx chip specific configuration call-back   Lee Jones
• [PATCH 24/35] mtd: st_spi_fsm: Prepare default sequences for read/write/erase   Lee Jones
• [PATCH 25/35] mtd: st_spi_fsm: Add the ability to read from a Serial Flash device   Lee Jones
• [PATCH 26/35] mtd: st_spi_fsm: Write to Flash via the FSM FIFO   Lee Jones
• [PATCH 27/35] mtd: st_spi_fsm: Supply a busy wait for post-write status   Lee Jones
• [PATCH 28/35] mtd: st_spi_fsm: Erase partly or as a whole a Serial Flash device   Lee Jones
• [PATCH 29/35] mtd: st_spi_fsm: Add the ability to read the FSM's status   Lee Jones
• [PATCH 30/35] mtd: st_spi_fsm: Add the ability to write to FSM's status register   Lee Jones
• [PATCH 31/35] mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back   Lee Jones
• [PATCH 32/35] mtd: st_spi_fsm: Supply the S25FLxxx chip specific configuration call-back   Lee Jones
• [PATCH 33/35] mtd: st_spi_fsm: Supply the W25Qxxx chip specific configuration call-back   Lee Jones
• [PATCH 34/35] mtd: st_spi_fsm: Move runtime configurable msg sequences into device's struct   Lee Jones
• [PATCH 35/35] ARM: STi: Add support for the FSM Serial Flash Controller   Lee Jones
• [PATCH v7 03/12] mfd: omap-usb-host: Use clock names as per function for reference clocks   Lee Jones
• [PATCH 1/2] mfd: palmas: support IRQ inversion at the board level   Lee Jones
• [PATCH 3/3] ahci: st: Add support for ST's SATA IP   Lee Jones
• [RFC PATCH v2 1/2] mfd: syscon: Support early initialization   Lee Jones
• [PATCH 3/3] ahci: st: Add support for ST's SATA IP   Lee Jones
• [PATCH 3/3] ahci: st: Add support for ST's SATA IP   Lee Jones
• [PATCH 3/3] ahci: st: Add support for ST's SATA IP   Lee Jones
• [PATCH 3/3] ahci: st: Add support for ST's SATA IP   Lee Jones
• [PATCH 3/3] ahci: st: Add support for ST's SATA IP   Lee Jones
• [PATCH 3/3] ahci: st: Add support for ST's SATA IP   Lee Jones
• [PATCH v4 00/36] mtd: st_spi_fsm: Add new driver   Lee Jones
• [PATCH v8 03/14] mfd: omap-usb-host: Use clock names as per function for reference clocks   Lee Jones
• [PATCH v8 03/14] mfd: omap-usb-host: Use clock names as per function for reference clocks   Lee Jones
• [PATCH 1/2] mfd: palmas: support IRQ inversion at the board level   Lee Jones
• [PATCH v8 01/14] mfd: omap-usb-host: Get clocks based on hardware revision   Lee Jones
• [PATCH v8 02/14] mfd: omap-usb-host: Always fail on clk_get() error   Lee Jones
• [PATCH v8 02/14] mfd: omap-usb-host: Always fail on clk_get() error   Lee Jones
• [PATCH 4/4] phy: miphy365x: Provide support for the MiPHY356x Generic PHY   Lee Jones
• [PATCH v2 1/3] ata: ahci_st: Provide DT bindings for ST's SATA implementation   Lee Jones
• [PATCH v2 2/3] ARM: DT: STi: Add DT node for ST's SATA device   Lee Jones
• [PATCH v2 3/3] ahci: st: Add support for ST's SATA IP   Lee Jones
• [PATCH 4/5] mfd: remove obsolete ti-ssp driver   Lee Jones
• [PATCH v2 3/3] ahci: st: Add support for ST's SATA IP   Lee Jones
• [PATCH v3 3/3] ahci: st: Add support for ST's SATA IP   Lee Jones
• [PATCH 4/5] mfd: remove obsolete ti-ssp driver   Lee Jones
• [PATCH v4 1/8] mfd: Move pm8xxx-irq.c contents into only driver that uses it   Lee Jones
• [PATCH v4 2/8] mfd: pm8921: Update for genirq changes   Lee Jones
• [PATCH v4 3/8] mfd: pm8921: Migrate to irqdomains   Lee Jones
• [PATCH v4 4/8] mfd: ssbi: Add regmap read/write helpers   Lee Jones
• [PATCH v4 5/8] mfd: pm8921: Use ssbi regmap   Lee Jones
• [PATCH v4 6/8] mfd: pm8921: Add DT match table   Lee Jones
• [PATCH v4 7/8] mfd: pm8921: Loosen Kconfig dependency   Lee Jones
• [PATCH v4 8/8] devicetree: bindings: Document PM8921/8058 PMICs   Lee Jones
• [PATCH v0 12/15] ARM: STi: DT: STiH416: 416 DT Entry for clockgen B/C/D/E/F   Lee Jones
• [PATCH] ARM: ux500: delete pointless DT config option   Lee Jones
• [PATCH/RFC] dmaengine: omap-dma: split header file   Balaji T K
• [PATCH] mmc: omap_hsmmc: Add support for Erratum 2.1.1.128 in device tree boot   Balaji T K
• [PATCH] ARM: dts: omap3-ldp: fix mmc configuration   Balaji T K
• [PATCH] mmc: omap_hsmmc: Add support for Erratum 2.1.1.128 in device tree boot   Balaji T K
• [PATCH V2 1/2] mmc: omap_hsmmc: Add support for quirky omap3 hsmmc controller   Balaji T K
• [PATCH V2 2/2] ARM: dts: omap3-ldp: fix mmc configuration   Balaji T K
• [GIT PULL] ARM: mvebu: stable fix for v3.13   Greg KH
• [PATCH v4 1/2] usb: musb: dsps, debugfs files   Greg KH
• [PATCH v4 1/2] usb: musb: dsps, debugfs files   Greg KH
• [PATCH] dt: platform driver: Fill the resources before probe and defer if needed   Greg KH
• [PATCH v4 0/2] Introduce AEMIF driver for Davinci/Keystone archs   Greg KH
• [PATCH v4 1/2] memory: ti-aemif: introduce AEMIF driver   Greg KH
• [PATCH v4 1/2] memory: ti-aemif: introduce AEMIF driver   Greg KH
• [GIT PULL] imx-drm conversion to component support   Greg KH
• linux-next: manual merge of the staging tree with the arm-soc tree   Greg KH
• linux-next: manual merge of the staging tree with the arm-soc tree   Greg KH
• [PATCH v6 0/2] Introduce AEMIF driver for Davinci/Keystone archs   Greg KH
• [PATCH RFC v3 3/3] Documentation: arm: define DT idle states bindings   Amit Kachhap
• [PATCH] arm: add DSB after icache flush in __flush_icache_all()   Vinayak Kale
• [PATCH] arm64: add DSB after icache flush in __flush_icache_all()   Vinayak Kale
• [PATCH V2] arm64: add DSB after icache flush in __flush_icache_all()   Vinayak Kale
• [PATCH] arm: add DSB after icache flush in __flush_icache_all()   Vinayak Kale
• [PATCH RESEND] arm: add DSB after icache flush in __flush_icache_all()   Vinayak Kale
• [PATCH RESEND] arm: add DSB after icache flush in __flush_icache_all()   Vinayak Kale
• [PATCH] ARM: OMAP2+: Use pdata quirks for wl12xx on the AM335x EV-MSK   Imre Kaloz
• [PATCH] ARM: OMAP2+: Use pdata quirks for wl12xx on the AM335x EV-MSK   Imre Kaloz
• [PATCH v6 1/3] ARM: EXYNOS: Add support for EXYNOS5410 SoC   Sachin Kamat
• [PATCH v1 0/1] Boot all secondary cores on Exynos SoC's   Sachin Kamat
• [PATCH v1 0/1] Boot all secondary cores on Exynos SoC's   Sachin Kamat
• [PATCH] ARM: S3C24XX: Fix typo "CONFIG_CPUS_3C2443"   Sachin Kamat
• [PATCH RESEND v2 00/12] clk/exynos convert clock IDs to macros   Sachin Kamat
• [PATCH v3 1/3] ARM: EXYNOS: initial board support for exynos5260 SoC   Sachin Kamat
• [PATCH v4 1/3] ARM: EXYNOS: initial board support for exynos5260 SoC   Sachin Kamat
• [PATCH 1/1] ARM: Exynos: Add generic compatible string   Sachin Kamat
• [PATCH 1/1] ARM: EXYNOS: Map SYSRAM address through DT   Sachin Kamat
• [PATCH 1/1] ARM: Exynos: Add generic compatible string   Sachin Kamat
• [PATCH 1/1] ARM: Exynos: Add generic compatible string   Sachin Kamat
• [PATCH 1/1] ARM: Exynos: Add generic compatible string   Sachin Kamat
• [PATCH 1/1] ARM: Exynos: Add generic compatible string   Sachin Kamat
• [PATCH 0/2] ARM: SAMSUNG: move all arches to generic uncompress.h   Sachin Kamat
• [PATCH] clk: samsung: remove parentheses from return statements   Sachin Kamat
• How to get the Linux kernel coverage data on ARM arch when I run LTP test?   Naresh Kamboju
• [LTP] How to get the Linux kernel coverage data on ARM arch when I run LTP test?   Naresh Kamboju
• [PATCH v2] ARM: asm: rename logical shift macros push pull into lspush lspull   Victor Kamensky
• [PATCH v2] ARM: asm: rename logical shift macros push pull into lspush lspull   Victor Kamensky
• [PATCH v2] ARM: asm: rename logical shift macros push pull into lspush lspull   Victor Kamensky
• [PATCH v2] ARM: asm: rename logical shift macros push pull into lspush lspull   Victor Kamensky
• [PATCH v2 0/7] armv7 BE kvm support   Victor Kamensky
• [PATCH v2 1/7] ARM: KVM: switch hypervisor into BE mode in case of BE host   Victor Kamensky
• [PATCH v2 2/7] ARM: KVM: fix vgic V7 assembler code to work in BE image   Victor Kamensky
• [PATCH v2 3/7] ARM: KVM: handle 64bit values passed to mrcc or from mcrr instructions in BE case   Victor Kamensky
• [PATCH v2 4/7] ARM: KVM: __kvm_vcpu_run function return result fix in BE case   Victor Kamensky
• [PATCH v2 5/7] ARM: KVM: one_reg coproc set and get BE fixes   Victor Kamensky
• [PATCH v2 6/7] ARM: KVM: vgic mmio should hold data as LE bytes array in BE case   Victor Kamensky
• [PATCH v2 7/7] ARM: KVM: MMIO support BE host running LE code   Victor Kamensky
• [PATCH 0/5] aarch64 BE kvm support   Victor Kamensky
• [PATCH 1/5] ARM64: KVM: MMIO support BE host running LE code   Victor Kamensky
• [PATCH 2/5] ARM64: KVM: set and get of sys registers in BE case   Victor Kamensky
• [PATCH 3/5] ARM64: KVM: store kvm_vcpu_fault_info est_el2 as word   Victor Kamensky
• [PATCH 4/5] ARM64: KVM: vgic_elrsr and vgic_eisr need to be byteswapped in BE case   Victor Kamensky
• [PATCH 5/5] ARM64: KVM: fix vgic_bitmap_get_reg function for BE 64bit case   Victor Kamensky
• [PATCH] gic: change access of gicc_ctrl register to read modify write.   Feng Kan
• [PATCH] irqchip:gic: change access of gicc_ctrl register to read modify write.   Feng Kan
• [PATCH V2] irqchip:gic: change access of gicc_ctrl register to read modify write.   Feng Kan
• [PATCH V2] irqchip:gic: change access of gicc_ctrl register to read modify write.   Feng Kan
• [PATCH V3] irqchip:gic: change access of gicc_ctrl register to read modify write.   Feng Kan
• [PATCH] cpufreq: Set policy to non-NULL only after all hotplug online work is done   Saravana Kannan
• [PATCH] PM / devfreq: Fix out of bounds access of transition table array   Saravana Kannan
• [PATCH] cpufreq: Set policy to non-NULL only after all hotplug online work is done   Saravana Kannan
• [PATCH] cpufreq: Set policy to non-NULL only after all hotplug online work is done   Saravana Kannan
• [PATCH] PM / devfreq: Fix out of bounds access of transition table array   Saravana Kannan
• [PATCH] cpufreq: Set policy to non-NULL only after all hotplug online work is done   Saravana Kannan
• [PATCH 1/3] cpufreq: stats: Remove redundant cpufreq_cpu_get() call   Saravana Kannan
• [PATCH 2/3] cpufreq: stats: Fix error handling in __cpufreq_stats_create_table()   Saravana Kannan
• [PATCH 3/3] cpufreq: Set policy to non-NULL only after all hotplug online work is done   Saravana Kannan
• [PATCH 1/3] cpufreq: stats: Remove redundant cpufreq_cpu_get() call   Saravana Kannan
• [PATCH 1/3] cpufreq: stats: Remove redundant cpufreq_cpu_get() call   Saravana Kannan
• [PATCH 2/3] cpufreq: stats: Fix error handling in __cpufreq_stats_create_table()   Saravana Kannan
• [PATCH 3/3] cpufreq: stats: Refactor common code into __cpufreq_stats_create_table()   Saravana Kannan
• [PATCH] cpufreq: Set policy to non-NULL only after all hotplug online work is done   Saravana Kannan
• [PATCH] PM / devfreq: Fix out of bounds access of transition table array   Saravana Kannan
• [PATCH v3 1/3] cpufreq: stats: Remove redundant cpufreq_cpu_get() call   Saravana Kannan
• [PATCH v3 2/3] cpufreq: stats: Fix error handling in __cpufreq_stats_create_table()   Saravana Kannan
• [PATCH v3 3/3] cpufreq: stats: Refactor common code into __cpufreq_stats_create_table()   Saravana Kannan
• [PATCH] PM / devfreq: Rewrite devfreq_update_status() to fix multiple bugs   Saravana Kannan
• [RFT][PATCH 00/12] change drivers power management to use dev_pm_ops   Shuah Khan
• [RFT][PATCH 01/12] arm: change locomo platform and bus power management to use dev_pm_ops   Shuah Khan
• [RFT][PATCH 02/12] arm: change sa1111 platform and bus power management to use dev_pm_ops   Shuah Khan
• [RFT][PATCH 03/12] arm: change scoop platform power management to use dev_pm_ops   Shuah Khan
• [PATCH v2] arm: keystone: enable watchdog support   Ivan Khoronzhuk
• [PATCH v2] arm: dts: keystone: add watchdog entry   Ivan Khoronzhuk
• [PATCH v4 1/1] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif   Ivan Khoronzhuk
• [PATCH v4 0/3] Introduce clocksource driver for Keystone platform   Ivan Khoronzhuk
• [PATCH v4 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Ivan Khoronzhuk
• [PATCH v4 2/3] clocksource: keystone: add bindings for keystone timer   Ivan Khoronzhuk
• [PATCH v4 3/3] arm: dts: keystone: add keystone timer entry   Ivan Khoronzhuk
• [PATCH v4 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Ivan Khoronzhuk
• [PATCH v4 2/3] clocksource: keystone: add bindings for keystone timer   Ivan Khoronzhuk
• [PATCH v4 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Ivan Khoronzhuk
• [PATCH v4 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Ivan Khoronzhuk
• [PATCH v5 0/3] Introduce clocksource driver for Keystone platform   Ivan Khoronzhuk
• [PATCH v5 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Ivan Khoronzhuk
• [PATCH v5 2/3] clocksource: keystone: add bindings for keystone timer   Ivan Khoronzhuk
• [PATCH v5 3/3] arm: dts: keystone: add keystone timer entry   Ivan Khoronzhuk
• [PATCH v5 2/3] clocksource: keystone: add bindings for keystone timer   Ivan Khoronzhuk
• [PATCH v5 2/3] clocksource: keystone: add bindings for keystone timer   Ivan Khoronzhuk
• [PATCH v4 0/2] Introduce AEMIF driver for Davinci/Keystone archs   Ivan Khoronzhuk
• [PATCH v4 1/2] memory: ti-aemif: introduce AEMIF driver   Ivan Khoronzhuk
• [PATCH v4 2/2] memory: ti-aemif: add bindings for AEMIF driver   Ivan Khoronzhuk
• [PATCH v5 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Ivan Khoronzhuk
• [PATCH v5 2/3] clocksource: keystone: add bindings for keystone timer   Ivan Khoronzhuk
• [PATCH v5 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Ivan Khoronzhuk
• [PATCH v6 0/3] Introduce clocksource driver for Keystone platform   Ivan Khoronzhuk
• [PATCH v6 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Ivan Khoronzhuk
• [PATCH v6 2/3] clocksource: keystone: add bindings for keystone timer   Ivan Khoronzhuk
• [PATCH v6 3/3] arm: dts: keystone: add keystone timer entry   Ivan Khoronzhuk
• [PATCH v4 1/2] memory: ti-aemif: introduce AEMIF driver   Ivan Khoronzhuk
• [PATCH v5 0/2] Introduce AEMIF driver for Davinci/Keystone archs   Ivan Khoronzhuk
• [PATCH v5 1/2] memory: ti-aemif: introduce AEMIF driver   Ivan Khoronzhuk
• [PATCH v5 2/2] memory: ti-aemif: add bindings for AEMIF driver   Ivan Khoronzhuk
• [PATCH v4 1/2] memory: ti-aemif: introduce AEMIF driver   Ivan Khoronzhuk
• [PATCH v5 2/2] memory: ti-aemif: add bindings for AEMIF driver   Ivan Khoronzhuk
• [PATCH v5 2/2] memory: ti-aemif: add bindings for AEMIF driver   Ivan Khoronzhuk
• [PATCH v6 0/2] Introduce AEMIF driver for Davinci/Keystone archs   Ivan Khoronzhuk
• [PATCH v6 1/2] memory: ti-aemif: introduce AEMIF driver   Ivan Khoronzhuk
• [PATCH v6 2/2] memory: ti-aemif: add bindings for AEMIF driver   Ivan Khoronzhuk
• [PATCH] ARM: dts: keystone: add AEMIF/NAND device entry   Ivan Khoronzhuk
• [PATCH] ARM: keystone_defconfig: enable AEMIF/NAND support   Ivan Khoronzhuk
• [PATCH 0/5] Introduce keystone reset driver   Ivan Khoronzhuk
• [PATCH 1/5] Power: reset: keystone-reset: introduce keystone reset driver   Ivan Khoronzhuk
• [PATCH 2/5] Power: reset: add bindings for keystone reset driver   Ivan Khoronzhuk
• [PATCH 3/5] ARM: keystone: remove redundant reset stuff   Ivan Khoronzhuk
• [PATCH 4/5] ARM: dts: keystone: update reset node to work with reset driver   Ivan Khoronzhuk
• [PATCH 5/5] ARM: keystone: enable reset driver support   Ivan Khoronzhuk
• [PATCH v9 1/6] arm64: Add macros to manage processor debug state   Vijay Kilari
• [PATCH v9 1/6] arm64: Add macros to manage processor debug state   Vijay Kilari
• [PATCH v9 1/6] arm64: Add macros to manage processor debug state   Vijay Kilari
• [PATCH v9 1/6] arm64: Add macros to manage processor debug state   Vijay Kilari
• [PATCH v9 1/6] arm64: Add macros to manage processor debug state   Vijay Kilari
• [PATCH v9 1/6] arm64: Add macros to manage processor debug state   Vijay Kilari
• [RFC v2 PATCH 1/1] ARM64: KGDB: Add FP/SIMD debug support   Vijay Kilari
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Kukjin Kim
• [PATCH 1/3] arm64: dts: add initial dts for Samsung GH7 SoC and SSDK-GH7 board   Kukjin Kim
• [PATCH 1/3] arm64: dts: add initial dts for Samsung GH7 SoC and SSDK-GH7 board   Kukjin Kim
• [PATCH 1/3] arm64: dts: add initial dts for Samsung GH7 SoC and SSDK-GH7 board   Kukjin Kim
• [PATCH 13/28] Remove S3C24XX_GPIO_EXTRA64   Kukjin Kim
• [PATCH 22/28] Remove S3C24XX_GPIO_EXTRA128   Kukjin Kim
• [PATCHv3 2/2] arm: Get rid of meminfo   Kukjin Kim
• [PATCH 00/12] ARM: S3C24XX: convert s3c2410, s3c2440 s3c2442 to common clock framework   Kukjin Kim
• [PATCH 0/3] arm64: add new support Samsung GH7 SoC and SSDK board   Kukjin Kim
• [PATCH 1/3] arm64: dts: add initial dts for Samsung GH7 SoC and SSDK-GH7 board   Kukjin Kim
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Kukjin Kim
• [PATCH 3/3] Documentation: DT: add new entry for Samsung GH7 SoC and SSDK board   Kukjin Kim
• [PATCHv3 2/2] arm: Get rid of meminfo   Kukjin Kim
• [PATCH] ARM: SAMSUNG: remove unneeded s3c24xx_init_cpu()   Kukjin Kim
• [PATCH] clocksource: exynos_mct: remove unwanted header file inclusion   Kukjin Kim
• [PATCH 1/3] irqchip: exynos-combiner: call handle_bad_irq directly   Kukjin Kim
• [PATCH] ARM: S3C24XX: Fix typo "CONFIG_CPUS_3C2443"   Kukjin Kim
• [PATCH] ARM: dts: exynos5250-arndale: Keep G3D regulator always on   Kukjin Kim
• [PATCH 22/28] Remove S3C24XX_GPIO_EXTRA128   Kukjin Kim
• [PATCH] ARM: s3c24xx: get rid of unneeded selects   Kukjin Kim
• [PATCH v2 7/9] clk: samsung: Drop old suspend/resume code   Kukjin Kim
• [PATCH v2 0/9] Samsung PM consolidation part 1 (clocks)   Kukjin Kim
• [PATCH] ARM: DTS: exynos5420: Rename hsi2c compatible to exynos5250-hsi2c   Kukjin Kim
• Samsung-clk patches for 3.15   Kukjin Kim
• [PATCH RESEND v2 00/12] clk/exynos convert clock IDs to macros   Kukjin Kim
• [PATCH RESEND v2 00/12] clk/exynos convert clock IDs to macros   Kukjin Kim
• Samsung-clk patches for 3.15   Kukjin Kim
• [PATCH 19/73] arm: mach-s3c64xx mach-crag6410-module.c is not modular   Kukjin Kim
• [PATCH] ARM: dts: fix incorrect vdd_arm voltage range for Exynos4412 based boards   Kukjin Kim
• [PATCH] ARM: dts: add max77686 pmic node for smdk5250 board   Kukjin Kim
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Kukjin Kim
• [PATCH 1/2] ARM: Exynos: Use generic uncompress.h   Kukjin Kim
• [PATCH 1/3] arm64: dts: add initial dts for Samsung GH7 SoC and SSDK-GH7 board   Kukjin Kim
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Kukjin Kim
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Kukjin Kim
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Kukjin Kim
• [PATCH 1/1] ARM: Exynos: Add generic compatible string   Kukjin Kim
• [PATCH v2 0/5] ARM: S3C24XX: convert s3c2412 to common clock framework   Kukjin Kim
• [PATCH 1/1] ARM: Exynos: Add generic compatible string   Kukjin Kim
• [PATCH RESEND v2 0/4] clk/exynos convert clock IDs to macros   Kukjin Kim
• [PATCH] clk: at91: remove redundant assignment   Colin King
• [PATCH] drivers/base: fix devres handling for master device   Russell King
• [PATCH RFC v2 13/35] imx-drm: add imx6 DT configuration for HDMI   Russell King
• [PATCH RFC v2 14/35] imx-drm: update and fix imx6 DT descriptions for v3 HDMI driver   Russell King
• [PATCH RFC v2 19/35] imx-drm: convert to componentised device support   Russell King
• [PATCH 01/26] dmaengine: omap-dma: use devm_kzalloc() to allocate omap_dmadev.   Russell King
• [PATCH 02/26] dmaengine: omap-dma: provide a hook to get the underlying DMA platform ops   Russell King
• [PATCH 03/26] dmaengine: omap-dma: program hardware directly   Russell King
• [PATCH 04/26] dmaengine: omap-dma: consolidate writes to DMA registers   Russell King
• [PATCH 05/26] dmaengine: omap-dma: control start/stop directly   Russell King
• [PATCH 06/26] dmaengine: omap-dma: move reading of dma position to omap-dma.c   Russell King
• [PATCH 07/26] dmaengine: omap-dma: consolidate setup of CSDP   Russell King
• [PATCH 08/26] dmaengine: omap-dma: consolidate setup of CCR   Russell King
• [PATCH 09/26] dmaengine: omap-dma: provide register definitions   Russell King
• [PATCH 10/26] dmaengine: omap-dma: move CCR buffering disable errata out of the fast path   Russell King
• [PATCH 11/26] dmaengine: omap-dma: consolidate clearing channel status register   Russell King
• [PATCH 12/26] dmaengine: omap-dma: improve efficiency loading C.SA/C.EI/C.FI registers   Russell King
• [PATCH 13/26] dmaengine: omap-dma: move clnk_ctrl setting to preparation functions   Russell King
• [PATCH 14/26] dmaengine: omap-dma: move barrier to omap_dma_start_desc()   Russell King
• [PATCH 15/26] dmaengine: omap-dma: use cached CCR value when enabling DMA   Russell King
• [PATCH 16/26] dmaengine: omap-dma: provide register read/write functions   Russell King
• [PATCH 17/26] dmaengine: omap-dma: cleanup errata 3.3 handling   Russell King
• [PATCH 18/26] ARM: omap: remove references to disable_irq_lch   Russell King
• [PATCH 19/26] ARM: omap: remove almost-const variables   Russell King
• [PATCH 20/26] ARM: omap: clean up DMA register accesses   Russell King
• [PATCH 21/26] ARM: omap: dma: get rid of errata global   Russell King
• [PATCH 22/26] ARM: omap: move dma channel allocation into plat-omap code   Russell King
• [PATCH 23/26] ARM: omap: dma: get rid of 'p' allocation and clean up   Russell King
• [PATCH 24/26] dmaengine: omap-dma: move register read/writes into omap-dma.c   Russell King
• [PATCH 25/26] dmaengine: omap-dma: move IRQ handling to omap-dma   Russell King
• [PATCH 26/26] dmaengine: omap-dma: more consolidation of CCR register setup   Russell King
• [PATCH] Fix uses of dma_max_pfn() when converting to a limiting address   Russell King
• [PATCH] NET: fec: only enable napi if we are successful   Russell King
• [PATCH RFC 1/2] leds: add DT support for LEDs wired to supply and default brightness   Russell King
• [PATCH RFC 2/2] ARM: add support for Cubox-i PWM-driven front panel LED   Russell King
• [PATCH RFC 01/31] genirq: Provide synchronize_hardirq()   Russell King
• [PATCH RFC 02/31] genirq: Provide irq_wake_thread()   Russell King
• [PATCH RFC 03/31] mmc: sdio_irq: rework sdio irq handling   Russell King
• [PATCH RFC 04/31] mmc: sdhci: clean up interrupt handling   Russell King
• [PATCH RFC 05/31] mmc: sdhci: clean up sdio interrupt enable handling   Russell King
• [PATCH RFC 06/31] mmc: sdhci: convert to new SDIO IRQ handling   Russell King
• [PATCH RFC 07/31] mmc: sdhci: push card_tasklet into threaded irq handler   Russell King
• [PATCH RFC 08/31] mmc: sdhci: allow sdio interrupts while sdhci runtime suspended   Russell King
• [PATCH RFC 09/31] mmc: sdhci: more efficient interrupt enable register handling   Russell King
• [PATCH RFC 10/31] mmc: sdhci: plug hole in disabling card detection interrupts   Russell King
• [PATCH RFC 11/31] mmc: sdhci: convert generic bus width setup to library function   Russell King
• [PATCH RFC 12/31] mmc: sdhci: convert reset into a library function   Russell King
• [PATCH RFC 13/31] mmc: sdhci: move FSL ESDHC reset handling quirk into esdhc code   Russell King
• [PATCH RFC 14/31] mmc: sdhci: avoid sync'ing the SG if there's no misalignment   Russell King
• [PATCH RFC 15/31] mmc: sdhci: convert ADMA descriptors to a coherent allocation   Russell King
• [PATCH RFC 16/31] mmc: sdhci: clean up sdhci_update_clock()/sdhci_set_clock()   Russell King
• [PATCH RFC 17/31] mmc: sdhci: move setting host->clock into sdhci_do_set_ios()   Russell King
• [PATCH RFC 18/31] mmc: sdhci: move setting mmc->actual_clock into set_clock handlers   Russell King
• [PATCH RFC 19/31] mmc: sdhci: convert sdhci_set_clock() into a library function   Russell King
• [PATCH RFC 20/31] mmc: sdhci-esdhc-imx: avoid DMA to kernel stack   Russell King
• [PATCH RFC 21/31] mmc: sdhci-esdhc-imx: avoid runtime_pm_get_sync() in esdhc_prepare_tuning()   Russell King
• [PATCH RFC 22/31] mmc: sdhci-esdhc-imx: fix lockdep splat upon tuning   Russell King
• [PATCH RFC 23/31] mmc: sdhci: hack up driver to make it more compliant with UHS-1   Russell King
• [PATCH RFC 24/31] mmc: sdhci: set_uhs_signaling() need not return a value   Russell King
• [PATCH RFC 25/31] mmc: sdhci: convert sdhci_set_uhs_signaling() into a library function   Russell King
• [PATCH RFC 26/31] mmc: sdhci: cache timing information locally   Russell King
• [PATCH RFC 27/31] mmc: sdhci: clean up sdhci_execute_tuning() decision   Russell King
• [PATCH RFC 28/31] mmc: sdhci-esdhc-imx: remove emulation of uhs_mode   Russell King
• [PATCH RFC 29/31] mmc: sdhci-of-esdhc: remove platform_suspend/platform_resume callbacks   Russell King
• [PATCH RFC 30/31] mmc: sdhci: remove platform_suspend/platform_resume callbacks   Russell King
• [PATCH RFC 31/31] mmc: sdhci-tegra: get rid of special PRESENT_STATE register handling   Russell King
• [PATCH 01/34] imx-drm: imx-hdmi: convert HDMI clock settings to tabular form   Russell King
• [PATCH 02/34] imx-drm: imx-hdmi: clean up setting CSC registers   Russell King
• [PATCH 03/34] imx-drm: imx-hdmi: provide register modification function   Russell King
• [PATCH 04/34] imx-drm: imx-hdmi: clean up setting of vp_conf   Russell King
• [PATCH 05/34] imx-drm: imx-hdmi: fix CTS/N setup at init time   Russell King
• [PATCH 06/34] imx-drm: ipu-v3: more inteligent DI clock selection   Russell King
• [PATCH 07/34] imx-drm: ipu-v3: don't use clk_round_rate() before clk_set_rate()   Russell King
• [PATCH 08/34] imx-drm: ipu-v3: more clocking fixes   Russell King
• [PATCH 09/34] imx-drm: add imx6 DT configuration for HDMI   Russell King
• [PATCH 10/34] imx-drm: update and fix imx6 DT descriptions for v3 HDMI driver   Russell King
• [PATCH 11/34] imx-drm: imx-drm-core: sanitise imx_drm_encoder_get_mux_id()   Russell King
• [PATCH 12/34] imx-drm: imx-drm-core: use array instead of list for CRTCs   Russell King
• [PATCH 13/34] imx-drm: provide common connector mode validation function   Russell King
• [PATCH 14/34] imx-drm: simplify setup of panel format   Russell King
• [PATCH 15/34] imx-drm: convert to componentised device support   Russell King
• [PATCH 16/34] imx-drm: imx-hdmi: convert to a component device   Russell King
• [PATCH 17/34] imx-drm: delay publishing sysfs connector entries   Russell King
• [PATCH 18/34] imx-drm: remove separate imx-fbdev   Russell King
• [PATCH 19/34] imx-drm: remove imx-fb.c   Russell King
• [PATCH 20/34] imx-drm: use supplied drm_device where possible   Russell King
• [PATCH 21/34] imx-drm: imx-drm-core: provide helper function to parse possible crtcs   Russell King
• [PATCH 22/34] imx-drm: imx-drm-core: provide common connector and encoder cleanup functions   Russell King
• [PATCH 23/34] imx-drm: parallel-display,imx-tve,imx-ldb: initialise drm components directly   Russell King
• [PATCH 24/34] imx-drm: imx-hdmi: initialise drm components directly   Russell King
• [PATCH 25/34] imx-drm: imx-drm-core: remove imx_drm_connector and imx_drm_encoder code   Russell King
• [PATCH 26/34] imx-drm: imx-drm-core: get rid of drm_mode_group_init_legacy_group()   Russell King
• [PATCH 27/34] imx-drm: imx-drm-core: kill off mutex   Russell King
• [PATCH 28/34] imx-drm: imx-drm-core: move allocation of imxdrm device to driver load function   Russell King
• [PATCH 29/34] imx-drm: imx-drm-core: various cleanups   Russell King
• [PATCH 30/34] imx-drm: imx-drm-core: add core hotplug connector support   Russell King
• [PATCH 31/34] imx-drm: imx-hdmi: add hotplug support to HDMI component   Russell King
• [PATCH 32/34] imx-drm: dw-hdmi-audio: add audio driver   Russell King
• [PATCH 33/34] imx-drm: dw-hdmi-audio: parse ELD from HDMI driver   Russell King
• [PATCH 34/34] imx-drm: add CEC HDMI driver   Russell King
• [PATCH 1/5] mmc: sdhci-spear: fix error handling paths for DT   Russell King
• [PATCH 2/5] mmc: sdhci-spear: fix platform_data usage   Russell King
• [PATCH 3/5] mmc: sdhci-spear: simplify resource handling   Russell King
• [PATCH 4/5] mmc: sdhci-spear: remove support for power gpio   Russell King
• [PATCH 5/5] mmc: sdhci-spear: use generic card detection gpio support   Russell King
• [GIT PULL] imx-drm conversion to component support   Russell King
• [PATCH] mmc: sdhci-bcm-kona: fix build errors when built-in   Russell King
• [PATCH 1/2] leds: add DT support for LEDs wired to supply and default brightness   Russell King
• [PATCH 2/2] ARM: add support for Cubox-i PWM-driven front panel LED   Russell King
• [PATCH] PCI: imx6: Fix link_up detection   Troy Kisky
• [PATCH] PCI: imx6: Fix link_up detection   Troy Kisky
• [PATCH 1/1] pci-imx6.c: wait for retraining   Troy Kisky
• [PATCH] xen/grant-table: Refactor gnttab_[un]map_refs to avoid m2p_override   Zoltan Kiss
• [PATCH] can: xilinx CAN controller support.   Marc Kleine-Budde
• [PATCH] can: xilinx CAN controller support.   Marc Kleine-Budde
• [PATCH] can: xilinx CAN controller support.   Marc Kleine-Budde
• [PATCH v2] can: xilinx CAN controller support.   Marc Kleine-Budde
• [PATCH v2] can: xilinx CAN controller support.   Marc Kleine-Budde
• [PATCH v2] can: xilinx CAN controller support.   Marc Kleine-Budde
• [PATCH v2] can: xilinx CAN controller support.   Marc Kleine-Budde
• [PATCH] can: xilinx CAN controller support.   Marc Kleine-Budde
• [PATCH] can: xilinx CAN controller support.   Marc Kleine-Budde
• [PATCH v10 01/15] usb: doc: phy-mxs: Add more compatible strings   Marc Kleine-Budde
• [PATCH v4] can: xilinx CAN controller support.   Marc Kleine-Budde
• [PATCH v4] can: xilinx CAN controller support.   Marc Kleine-Budde
• [PATCH v4] can: xilinx CAN controller support.   Marc Kleine-Budde
• [PATCH v4] can: xilinx CAN controller support.   Marc Kleine-Budde
• [PATCH v4] can: xilinx CAN controller support.   Marc Kleine-Budde
• [PATCH v4] can: xilinx CAN controller support.   Marc Kleine-Budde
• [PATCH v4] can: xilinx CAN controller support.   Marc Kleine-Budde
• [PATCH v4] ARM/serial: at91: switch atmel serial to use gpiolib   Uwe Kleine-König
• [PATCH] [RFC] ARM: ixp4xx: fix timer latch calculation   Uwe Kleine-König
• [PATCH 0/3] ARM: v7m: updates for 3.15   Uwe Kleine-König
• [PATCH 1/3] ARM: make isa_mode macro more robust and fix for v7-M   Uwe Kleine-König
• [PATCH 2/3] ARM: show_regs: on v7-M there are no FIQs, different processor modes, ...   Uwe Kleine-König
• [PATCH 3/3] ARM: v7m: add trivial suspend support   Uwe Kleine-König
• 'unannotated irqs-on' lockdep warning   Uwe Kleine-König
• [RFC PATCH] i2c: new bus driver for efm32   Uwe Kleine-König
• [PATCH 0/6] net: cpsw: Support for am335x chip MACIDs   Uwe Kleine-König
• [PATCH 4/6] net: cpsw: Use cpsw-ctrl-macid driver   Uwe Kleine-König
• [PATCH 3/6] net: cpsw: Add control-module macid driver   Uwe Kleine-König
• [PATCH 6/6] arm: dts: am335x beagle bone use processor macids   Uwe Kleine-König
• [PATCH] [RFC] ARM: ixp4xx: fix timer latch calculation   Uwe Kleine-König
• [RFC PATCH] i2c: new bus driver for efm32   Uwe Kleine-König
• [GIT PULL v2] get rid of <mach/timex.h>   Uwe Kleine-König
• [GIT PULL v2] get rid of <mach/timex.h>   Uwe Kleine-König
• [PATCH] ARM: let dumping page tables depend on MMU   Uwe Kleine-König
• [GIT PULL] efm32 cleanups for next   Uwe Kleine-König
• [PATCH 1/2] ARM: efm32: drop unused file entry-macro.S   Uwe Kleine-König
• [PATCH 2/2] ARM: efm32: drop unused file <mach/timex.h>   Uwe Kleine-König
• [PATCH v2] ARM: make isa_mode macro more robust and fix for v7-M   Uwe Kleine-König
• [PATCH v2] ARM: show_regs: on v7-M there are no FIQs, different processor modes, ...   Uwe Kleine-König
• [PATCH] ARM: v7m: add trivial suspend support   Uwe Kleine-König
• [PATCH v2 01/19] serial: sh-sci: Enable the driver on all ARM platforms   Uwe Kleine-König
• [PATCH v2 01/19] serial: sh-sci: Enable the driver on all ARM platforms   Uwe Kleine-König
• [PATCH] ARM: efm32: drop selecting CLKSRC_MMIO   Uwe Kleine-König
• [GIT PULL v2] efm32 cleanups for next   Uwe Kleine-König
• [GIT PULL] v7m patches for next   Uwe Kleine-König
• [PATCH] gpio: only enable kona driver on BCM_MOBILE or for compile testing   Uwe Kleine-König
• [PATCH] phy: restrict Samsung S5P/Exynos drivers to the respective architectures   Uwe Kleine-König
• [PATCH 0/3] leds/pwm: don't call pwm_disable when setting brightness   Uwe Kleine-König
• [PATCH] phy: restrict Samsung S5P/Exynos drivers to the respective architectures   Uwe Kleine-König
• [PATCH] ARM: mach-imx: Kconfig: Remove IMX_HAVE_PLATFORM_IMX2_WDT from SOC_IMX53   Uwe Kleine-König
• [PATCH v2] ARM: mach-imx: Kconfig: Remove IMX_HAVE_PLATFORM_IMX2_WDT from SOC_IMX53   Uwe Kleine-König
• [GIT PULL v2] efm32 cleanups for next   Uwe Kleine-König
• [patch 09/26] arm: mmp: Remove pointless fiddling with irq internals   Uwe Kleine-König
• [GIT PULL v3] efm32 cleanups for next   Uwe Kleine-König
• [PATCH RESEND] mtd: fix bug in partition size calculation related to MTDPART_OFS_RETAIN   Uwe Kleine-König
• build error on 3.14-rc4 with SPLIT_PTLOCK_CPUS <= NR_CPUS and !MMU   Uwe Kleine-König
• build error on 3.14-rc4 with SPLIT_PTLOCK_CPUS <= NR_CPUS and !MMU   Uwe Kleine-König
• [PATCH] scripts/link-vmlinux.sh: correct base address for some ARM special cases   Uwe Kleine-König
• [PATCH] scripts/link-vmlinux.sh: correct base address for some ARM special cases   Uwe Kleine-König
• [PATCH] scripts/link-vmlinux.sh: correct base address for some ARM special cases   Uwe Kleine-König
• [PATCH] ARM: v7m: only call printk with CONFIG_PRINTK=y   Uwe Kleine-König
• [PATCH] ARM: XEN depends on having a MMU   Uwe Kleine-König
• [PATCH] ARM: XEN depends on having a MMU   Uwe Kleine-König
• [PATCH 1/3] clk: socfpga: Fix integer overflow in clock calculation   Uwe Kleine-König
• [PATCH] gpio: only enable kona driver on BCM_MOBILE or for compile testing   Uwe Kleine-König
• [PATCH] gpio: only enable kona driver on BCM_MOBILE or for compile testing   Uwe Kleine-König
• [GIT PULL] ARM: kprobes: big-endian support   Taras Kondratiuk
• [PATCH] ARM: OMAP1: nokia770: enable tahvo-usb   Aaro Koskinen
• [PATCH 1/2] ARM: dts: N9/N950: fix boot hang with 3.14-rc1   Aaro Koskinen
• [PATCH 2/2] ARM: dts: N900: add missing compatible property   Aaro Koskinen
• [PATCH] ARM: OMAP2+: Remove MACH_NOKIA_N800   Aaro Koskinen
• [PATCH] ARM: dts: omap3-n9 family: mark proper OMAP version   Aaro Koskinen
• [PATCH] dma: mv_xor: Silence a bunch of LPAE-related warnings   Vinod Koul
• [PATCH v2] dma: Add Xilinx AXI Video Direct Memory Access Engine driver support   Vinod Koul
• [Patch v5 1/2] dmaengine: add Qualcomm BAM dma driver   Vinod Koul
• [Patch v5 1/2] dmaengine: add Qualcomm BAM dma driver   Vinod Koul
• [PATCH v3 1/3] dma: Support multiple interleaved frames with non-contiguous memory   Vinod Koul
• [Patch v5 1/2] dmaengine: add Qualcomm BAM dma driver   Vinod Koul
• [PATCHv11 2/2] dma: Add Freescale eDMA engine driver support   Vinod Koul
• [PATCH RESEND v11 2/2] dma: Add Freescale eDMA engine driver support   Vinod Koul
• [PATCH] dma: sdma: Add imx25 compatible   Vinod Koul
• [PATCH 11/18] extcon: max14577: Add max14577 prefix to muic_irqs   Krzysztof Kozlowski
• [PATCH 05/18] mfd: max14577: Use of_match_ptr() in i2c_driver   Krzysztof Kozlowski
• [PATCH 07/18] mfd: max14577: Rename and add MAX14577 symbols to prepare for max77836   Krzysztof Kozlowski
• [PATCH 09/18] mfd: max14577: Add "muic" suffix to regmap and irq_chip   Krzysztof Kozlowski
• [PATCH 08/18] mfd: max14577: Rename state container to maxim_core   Krzysztof Kozlowski
• [PATCH 16/18] charger: max14577: Add support for MAX77836 charger   Krzysztof Kozlowski
• [PATCH 10/18] mfd: max14577: Add detection of device type   Krzysztof Kozlowski
• [PATCH 13/18] mfd: max77836: Add max77836 support to max14577 driver   Krzysztof Kozlowski
• [PATCH v2 00/15] mfd: max14577: Add support for MAX77836   Krzysztof Kozlowski
• [PATCH v2 01/15] extcon: max14577: Change extcon name instead of static name according to device type   Krzysztof Kozlowski
• [PATCH v2 02/15] mfd: max14577: Rename and add MAX14577 symbols to prepare for max77836   Krzysztof Kozlowski
• [PATCH v2 03/15] mfd: max14577: Rename state container to maxim_core   Krzysztof Kozlowski
• [PATCH v2 04/15] mfd: max14577: Add "muic" suffix to regmap and irq_chip   Krzysztof Kozlowski
• [PATCH v2 05/15] mfd: max14577: Add detection of device type   Krzysztof Kozlowski
• [PATCH v2 06/15] extcon: max14577: Add max14577 prefix to muic_irqs   Krzysztof Kozlowski
• [PATCH v2 07/15] extcon: max14577: Choose muic_irqs according to device type   Krzysztof Kozlowski
• [PATCH v2 08/15] mfd: max77836: Add max77836 support to max14577 driver   Krzysztof Kozlowski
• [PATCH v2 09/15] extcon: max14577: Add support for max77836   Krzysztof Kozlowski
• [PATCH v2 10/15] regulator: max14577: Add support for max77836 regulators   Krzysztof Kozlowski
• [PATCH v2 11/15] charger: max14577: Add support for MAX77836 charger   Krzysztof Kozlowski
• [PATCH v2 12/15] power: max17040: Add ID for max77836 Fuel Gauge block   Krzysztof Kozlowski
• [PATCH v2 13/15] regulator/mfd: max14577: Export symbols for calculating charger current   Krzysztof Kozlowski
• [PATCH v2 14/15] charger: max14577: Configure battery-dependent settings from DTS   Krzysztof Kozlowski
• [PATCH v2 15/15] mfd: max14577: Add device tree bindings document   Krzysztof Kozlowski
• [PATCH v2 14/15] charger: max14577: Configure battery-dependent settings from DTS   Krzysztof Kozlowski
• [PATCH v2 08/15] mfd: max77836: Add max77836 support to max14577 driver   Krzysztof Kozlowski
• [PATCH v2 14/15] charger: max14577: Configure battery-dependent settings from DTS   Krzysztof Kozlowski
• [PATCH v3 00/15] mfd: max14577: Add support for MAX77836   Krzysztof Kozlowski
• [PATCH v3 01/15] extcon: max14577: Change extcon name instead of static name according to device type   Krzysztof Kozlowski
• [PATCH v3 02/15] mfd: max14577: Rename and add MAX14577 symbols to prepare for max77836   Krzysztof Kozlowski
• [PATCH v3 03/15] mfd: max14577: Rename state container to maxim_core   Krzysztof Kozlowski
• [PATCH v3 04/15] mfd: max14577: Add "muic" suffix to regmap and irq_chip   Krzysztof Kozlowski
• [PATCH v3 05/15] mfd: max14577: Add detection of device type   Krzysztof Kozlowski
• [PATCH v3 06/15] extcon: max14577: Add max14577 prefix to muic_irqs   Krzysztof Kozlowski
• [PATCH v3 07/15] extcon: max14577: Choose muic_irqs according to device type   Krzysztof Kozlowski
• [PATCH v3 08/15] mfd: max77836: Add max77836 support to max14577 driver   Krzysztof Kozlowski
• [PATCH v3 09/15] extcon: max14577: Add support for max77836   Krzysztof Kozlowski
• [PATCH v3 10/15] regulator: max14577: Add support for max77836 regulators   Krzysztof Kozlowski
• [PATCH v3 11/15] charger: max14577: Add support for MAX77836 charger   Krzysztof Kozlowski
• [PATCH v3 12/15] power: max17040: Add ID for max77836 Fuel Gauge block   Krzysztof Kozlowski
• [PATCH v3 13/15] regulator/mfd: max14577: Export symbols for calculating charger current   Krzysztof Kozlowski
• [PATCH v3 14/15] charger: max14577: Configure battery-dependent settings from DTS   Krzysztof Kozlowski
• [PATCH v3 15/15] mfd: max14577: Add device tree bindings document   Krzysztof Kozlowski
• [PATCH v3 14/15] charger: max14577: Configure battery-dependent settings from DTS   Krzysztof Kozlowski
• [PATCH v3 02/15] mfd: max14577: Rename and add MAX14577 symbols to prepare for max77836   Krzysztof Kozlowski
• [PATCH v3 14/15] charger: max14577: Configure battery-dependent settings from DTS   Krzysztof Kozlowski
• [PATCH v3 02/15] mfd: max14577: Rename and add MAX14577 symbols to prepare for max77836   Krzysztof Kozlowski
• [PATCH v4 00/16] mfd: max14577: Add support for MAX77836   Krzysztof Kozlowski
• [PATCH v4 01/16] extcon: max14577: Change extcon name instead of static name according to device type   Krzysztof Kozlowski
• [PATCH v4 02/16] mfd: max14577: Rename and add MAX14577 symbols to prepare for max77836   Krzysztof Kozlowski
• [PATCH v4 03/16] mfd: max14577: Rename state container to maxim_core   Krzysztof Kozlowski
• [PATCH v4 04/16] mfd: max14577: Add "muic" suffix to regmap and irq_chip   Krzysztof Kozlowski
• [PATCH v4 05/16] mfd: max14577: Add detection of device type   Krzysztof Kozlowski
• [PATCH v4 06/16] extcon: max14577: Add max14577 prefix to muic_irqs   Krzysztof Kozlowski
• [PATCH v4 07/16] extcon: max14577: Choose muic_irqs according to device type   Krzysztof Kozlowski
• [PATCH v4 08/16] mfd: max77836: Add max77836 support to max14577 driver   Krzysztof Kozlowski
• [PATCH v4 09/16] extcon: max14577: Add support for max77836   Krzysztof Kozlowski
• [PATCH v4 10/16] regulator: max14577: Add support for max77836 regulators   Krzysztof Kozlowski
• [PATCH v4 11/16] charger: max14577: Add support for MAX77836 charger   Krzysztof Kozlowski
• [PATCH v4 12/16] power: max17040: Add ID for max77836 Fuel Gauge block   Krzysztof Kozlowski
• [PATCH v4 13/16] regulator/mfd: max14577: Export symbols for calculating charger current   Krzysztof Kozlowski
• [PATCH v4 14/16] charger: max14577: Configure battery-dependent settings from DTS   Krzysztof Kozlowski
• [PATCH v4 15/16] mfd: max14577: Add device tree bindings document   Krzysztof Kozlowski
• [PATCH v4 16/16] regulator: max14577: Implement SUSPEND mode for MAX77836 LDO-s   Krzysztof Kozlowski
• [PATCH 0/4] clk: dt: add support for default rate/parent   Tero Kristo
• [PATCH 1/4] clk: ti: mux: add support for default-parenting   Tero Kristo
• [PATCH 2/4] clk: add support for default-rate   Tero Kristo
• [PATCH 3/4] clk: ti: add support for default-rate property from DT   Tero Kristo
• [PATCH 4/4] clk: ti: omap4: set default-parents and default-rates using DT   Tero Kristo
• [PATCH] ARM: OMAP3+: DPLL: stop reparenting to same parent if already done   Tero Kristo
• [PATCH] ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT   Tero Kristo
• [PATCH 2/2] ARM: OMAP2+: fix dpll round_rate() to actually round   Tero Kristo
• [PATCH 1/8] clk: divider: fix rate calculation for fractional rates   Tero Kristo
• [PATCH 4/8] ARM: dts: fix omap3 dss clock handle names   Tero Kristo
• [PATCH 5/8] ARM: dts: fix DPLL4 x2 clkouts on 3630   Tero Kristo
• [PATCH 6/8] ARM: dts: use ti, fixed-factor-clock for dpll4_m4x2_mul_ck   Tero Kristo
• [PATCH 7/8] ARM: dts: set 'ti,set-rate-parent' for dpll4_m4 path   Tero Kristo
• [PATCH 2/2] ARM: DTS: OMAP4: Add gpmc_fck clock node   Tero Kristo
• [PATCH 2/2] ARM: DTS: OMAP4: Add gpmc_fck clock node   Tero Kristo
• [PATCH v2 0/2] ARM: OMAP4: Fix gpmc_fck clock   Tero Kristo
• [PATCH v2 0/2] ARM: OMAP4: Fix gpmc_fck clock   Tero Kristo
• [PATCH 1/2] clk: ti: am335x: remove unecessary cpu0 clk node   Tero Kristo
• [PATCH 2/2] ARM: dts: OMAP3+: add clock nodes for CPU   Tero Kristo
• [PATCH 00/12] ARM: OMAP2 DT clock conversion   Tero Kristo
• [PATCH 01/12] ARM: OMAP2: convert sys_ck and osc_ck to standard clock types   Tero Kristo
• [PATCH 02/12] ARM: OMAP2420: clock: get rid of fixed-div property use   Tero Kristo
• [PATCH 03/12] CLK: TI: DPLL: simplify autoidle register detection logic   Tero Kristo
• [PATCH 04/12] CLK: TI: DPLL: add support for omap2 core dpll   Tero Kristo
• [PATCH 05/12] CLK: TI: APLL: add support for omap2 aplls   Tero Kristo
• [PATCH 06/12] CLK: TI: gate: fixed DT binding documentation bugs   Tero Kristo
• [PATCH 07/12] CLK: TI: interface: add support for omap2430 specific interface clock   Tero Kristo
• [PATCH 08/12] CLK: TI: OMAP2: add clock init support   Tero Kristo
• [PATCH 09/12] ARM: dts: omap2 clock data   Tero Kristo
• [PATCH 10/12] ARM: OMAP2: clock: add DT boot support for cpufreq_ck   Tero Kristo
• [PATCH 11/12] ARM: OMAP2: PRM: add support for OMAP2 specific clock providers   Tero Kristo
• [PATCH 12/12] ARM: OMAP2: clock: use DT clock boot if available   Tero Kristo
• [PATCH 00/12] ARM: OMAP2 DT clock conversion   Tero Kristo
• [PATCH v3 1/2] CLK: TI: OMAP4/5/DRA7: Remove gpmc_fck from dummy clocks   Tero Kristo
• [PATCH] dma-buf: avoid using IS_ERR_OR_NULL   Greg Kroah-Hartman
• [PATCH v3 0/2] *** SUBJECT HERE ***   Greg Kroah-Hartman
• [PATCH] dma-buf: avoid using IS_ERR_OR_NULL   Greg Kroah-Hartman
• [PATCH v9 0/4] ohci-platform and ehci-plaform patches rebased on 3.14-rc1   Greg Kroah-Hartman
• [PATCH v2 0/4] tty/serial: Add helpers to use GPIOs to control modem lines   Greg Kroah-Hartman
• [PATCH 01/12] misc: vexpress-syscfg: Add udelay-based delay   Greg Kroah-Hartman
• [PATCH v5 1/6] spmi: Linux driver framework for SPMI   Greg Kroah-Hartman
• [PATCH v6 0/6] Add support for the System Power Management Interface (SPMI)   Greg Kroah-Hartman
• [PATCHv2 0/5] net: rfkill: gpio: cleanup and a few new acpi ids   Heikki Krogerus
• [PATCHv2 1/5] ARM: tegra: remove obsolete gpio entries   Heikki Krogerus
• [PATCHv2 2/5] net: rfkill: gpio: remove unused and obsolete platform parameters   Heikki Krogerus
• [PATCHv2 3/5] net: rfkill: gpio: remove gpio names   Heikki Krogerus
• [PATCHv2 4/5] net: rfkill: gpio: add ACPI ID for GPS module on Lenove Miix2   Heikki Krogerus
• [PATCHv2 5/5] net: rfkill: gpio: add ACPI IDs for a Broadcom bluetooth chip   Heikki Krogerus
• [PATCHv2 4/5] net: rfkill: gpio: add ACPI ID for GPS module on Lenove Miix2   Heikki Krogerus
• [PATCHv3 4/5] net: rfkill: gpio: add ACPI ID for GPS module on Lenovo Miix2   Heikki Krogerus
• [PATCH v2 0/5] Add Broadcom Kona PWM Support   Tim Kryger
• [PATCH v2 1/5] Documentation: dt: Add Kona PWM binding   Tim Kryger
• [PATCH v2 2/5] pwm: kona: Introduce Kona PWM controller support   Tim Kryger
• [PATCH v2 3/5] ARM: dts: Declare the PWM for bcm11351 (bcm281xx)   Tim Kryger
• [PATCH v2 4/5] ARM: dts: Enable the PWM for bcm28155 AP board   Tim Kryger
• [PATCH v2 5/5] ARM: bcm_defconfig: Enable PWM and Backlight   Tim Kryger
• [PATCH v2] ARM: dts: Leave sdio1 as disabled on bcm28155-ap   Tim Kryger
• [PATCH v3 0/6] arm64: Add ftrace support   Kulkarni, Ganapatrao
• [PATCH v4 1/7] arm64: Add ftrace support   Kulkarni, Ganapatrao
• ARM64: Not all h/w events are mapped in perf_event.c   Ganapatrao Kulkarni
• [PATCH V5 0/8]PCI:Add SPEAr13xx PCie support   Mohit Kumar
• [PATCH V5 1/8] clk: SPEAr13xx: Fix pcie clock name   Mohit Kumar
• [PATCH V5 2/8] SPEAr13xx: Fix static mapping table   Mohit Kumar
• [PATCH V5 3/8] SPEAr13xx: defconfig: Update   Mohit Kumar
• [PATCH V5 4/8] phy: st-miphy-40lp: Add skeleton driver   Mohit Kumar
• [PATCH V5 5/8] SPEAr13xx: Fixup: Move SPEAr1340 SATA platform code to phy driver   Mohit Kumar
• [PATCH V5 6/8] phy: st-miphy-40lp: Add SPEAr1310 and SPEAr1340 PCIe phy support   Mohit Kumar
• [PATCH V6 00/12]PCI:Add SPEAr13xx PCie support   Mohit Kumar
• [PATCH V6 01/12] clk: SPEAr13XX: Fix pcie clock name   Mohit Kumar
• [PATCH V6 02/12] SPEAr13XX: Fix static mapping table   Mohit Kumar
• [PATCH V6 06/12] SPEAr13xx: Fixup: Move SPEAr1340 SATA platform code to phy driver   Mohit Kumar
• [PATCH V6 07/12] phy: st-miphy-40lp: Add SPEAr1310 and SPEAr1340 PCIe phy support   Mohit Kumar
• [PATCH V6 09/12] SPEAr13XX: dts: Add PCIe node information   Mohit Kumar
• [PATCH V6 11/12] SPEAr13xx: defconfig: Update   Mohit Kumar
• [PATCH V7 01/10] clk: SPEAr13XX: Fix pcie clock name   Mohit Kumar
• [PATCH V7 02/10] SPEAr13XX: Fix static mapping table   Mohit Kumar
• [PATCH V7 07/10] SPEAr13XX: dts: Add PCIe node information   Mohit Kumar
• [PATCH V7 09/10] SPEAr13xx: defconfig: Update   Mohit Kumar
• [PATCH RFC 07/31] mmc: sdhci: push card_tasklet into threaded irq handler   Viresh Kumar
• [PATCH RFC 07/31] mmc: sdhci: push card_tasklet into threaded irq handler   Viresh Kumar
• [PATCH RFC 07/31] mmc: sdhci: push card_tasklet into threaded irq handler   Viresh Kumar
• [PATCH RFC 07/31] mmc: sdhci: push card_tasklet into threaded irq handler   Viresh Kumar
• [PATCH RFC 07/31] mmc: sdhci: push card_tasklet into threaded irq handler   Viresh Kumar
• [PATCH v4 18/22] drivers: Enable building of Kirkwood drivers for mach-mvebu   Viresh Kumar
• [PATCH 1/5] mmc: sdhci-spear: fix error handling paths for DT   Viresh Kumar
• [PATCH] cpufreq: Set policy to non-NULL only after all hotplug online work is done   Viresh Kumar
• [PATCH] cpufreq: Set policy to non-NULL only after all hotplug online work is done   Viresh Kumar
• [PATCH] cpufreq: Set policy to non-NULL only after all hotplug online work is done   Viresh Kumar
• [PATCH] cpufreq: Set policy to non-NULL only after all hotplug online work is done   Viresh Kumar
• [PATCH] cpufreq: Set policy to non-NULL only after all hotplug online work is done   Viresh Kumar
• [PATCH] cpufreq: Set policy to non-NULL only after all hotplug online work is done   Viresh Kumar
• [PATCH 1/3] cpufreq: stats: Remove redundant cpufreq_cpu_get() call   Viresh Kumar
• [PATCH 2/3] cpufreq: stats: Fix error handling in __cpufreq_stats_create_table()   Viresh Kumar
• [PATCH] cpufreq: Set policy to non-NULL only after all hotplug online work is done   Viresh Kumar
• [PATCH] cpufreq: Set policy to non-NULL only after all hotplug online work is done   Viresh Kumar
• [PATCH 3/3] cpufreq: Set policy to non-NULL only after all hotplug online work is done   Viresh Kumar
• [PATCH 3/3] cpufreq: stats: Refactor common code into __cpufreq_stats_create_table()   Viresh Kumar
• [PATCH v3 1/3] cpufreq: stats: Remove redundant cpufreq_cpu_get() call   Viresh Kumar
• [PATCH] iommu/exynos: Remove driver   Cho KyongHo
• [PATCH] ARM: davinci: fix typo   Prabhakar Lad
• [PATCH 1/2] [media] v4l2: Add settings for Horizontal and Vertical MV Search Range   Prabhakar Lad
• [linux-sunxi] [PATCH v6 4/8] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Priit Laes
• [PATCH 05/14] net: axienet: Service completion interrupts ASAP   David Laight
• [PATCH v2 0/6] ARM: sunxi: Add driver for SD/MMC hosts found on allwinner sunxi SOCs   David Lanzendörfer
• [PATCH v2 1/6] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   David Lanzendörfer
• [PATCH v2 2/6] clk: sunxi: Implement MMC phase control   David Lanzendörfer
• [PATCH v2 3/6] ARM: sunxi: clk: export clk_sunxi_mmc_phase_control   David Lanzendörfer
• [PATCH v2 4/6] ARM: dts: sun7i: Add support for mmc   David Lanzendörfer
• [PATCH v2 5/6] ARM: dts: sun4i: Add support for mmc   David Lanzendörfer
• [PATCH v2 6/6] ARM: dts: sun5i: Add support for mmc   David Lanzendörfer
• [PATCH v2 0/6] ARM: sunxi: Add driver for SD/MMC hosts found on allwinner sunxi SOCs   David Lanzendörfer
• [PATCH v2 0/6] ARM: sunxi: Add driver for SD/MMC hosts found on allwinner sunxi SOCs   David Lanzendörfer
• [PATCH 1/5] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   David Lanzendörfer
• [PATCH v3 0/7] ARM: sunxi: Add driver for SD/MMC hosts found on allwinner sunxi SOCs   David Lanzendörfer
• [PATCH v3 1/7] clk: sunxi: factors: automatic reparenting support   David Lanzendörfer
• [PATCH v3 2/7] clk: sunxi: Implement MMC phase control   David Lanzendörfer
• [PATCH v3 3/7] ARM: sunxi: clk: export clk_sunxi_mmc_phase_control   David Lanzendörfer
• [PATCH v3 4/7] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   David Lanzendörfer
• [PATCH v3 5/7] ARM: dts: sun7i: Add support for mmc   David Lanzendörfer
• [PATCH v3 6/7] ARM: dts: sun4i: Add support for mmc   David Lanzendörfer
• [PATCH v3 7/7] ARM: dts: sun5i: Add support for mmc   David Lanzendörfer
• [PATCH v3 0/7] ARM: sunxi: Add driver for SD/MMC hosts found on allwinner sunxi SOCs   David Lanzendörfer
• [PATCH] Adding basic support for the INet-97F_Rev_02 board   David Lanzendörfer
• [PATCH v4 0/7] ARM: sunxi: Add driver for SD/MMC hosts found on allwinner sunxi SOCs   David Lanzendörfer
• [PATCH v4 1/7] clk: sunxi: factors: automatic reparenting support   David Lanzendörfer
• [PATCH v4 2/7] clk: sunxi: Implement MMC phase control   David Lanzendörfer
• [PATCH v4 3/7] ARM: sunxi: clk: export clk_sunxi_mmc_phase_control   David Lanzendörfer
• [PATCH v4 4/7] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   David Lanzendörfer
• [PATCH v4 5/7] ARM: dts: sun7i: Add support for mmc   David Lanzendörfer
• [PATCH v4 6/7] ARM: dts: sun4i: Add support for mmc   David Lanzendörfer
• [PATCH v4 7/7] ARM: dts: sun5i: Add support for mmc   David Lanzendörfer
• [PATCH v3 0/2] *** SUBJECT HERE ***   David Lanzendörfer
• [PATCH v4 4/7] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   David Lanzendörfer
• [PATCH v5 0/8] ARM: sunxi: Add driver for SD/MMC hosts found on allwinner sunxi SOCs   David Lanzendörfer
• [PATCH v5 1/8] clk: sunxi: factors: automatic reparenting support   David Lanzendörfer
• [PATCH v5 2/8] clk: sunxi: Implement MMC phase control   David Lanzendörfer
• [PATCH v5 3/8] ARM: sunxi: clk: export clk_sunxi_mmc_phase_control   David Lanzendörfer
• [PATCH v5 4/8] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   David Lanzendörfer
• [PATCH v5 5/8] ARM: dts: sun7i: Add support for mmc   David Lanzendörfer
• [PATCH v5 6/8] ARM: dts: sun4i: Add support for mmc   David Lanzendörfer
• [PATCH v5 7/8] ARM: dts: sun5i: Add support for mmc   David Lanzendörfer
• [PATCH v5 8/8] ARM: sunxi: Add documentation for driver for SD/MMC hosts found on Allwinner sunxi SoCs   David Lanzendörfer
• [PATCH v6 0/8]   David Lanzendörfer
• [PATCH v6 1/8] clk: sunxi: factors: automatic reparenting support   David Lanzendörfer
• [PATCH v6 2/8] clk: sunxi: Implement MMC phase control   David Lanzendörfer
• [PATCH v6 3/8] ARM: sunxi: clk: export clk_sunxi_mmc_phase_control   David Lanzendörfer
• [PATCH v6 4/8] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   David Lanzendörfer
• [PATCH v6 5/8] ARM: dts: sun7i: Add support for mmc   David Lanzendörfer
• [PATCH v6 6/8] ARM: dts: sun4i: Add support for mmc   David Lanzendörfer
• [PATCH v6 7/8] ARM: dts: sun5i: Add support for mmc   David Lanzendörfer
• [PATCH v6 8/8] ARM: sunxi: Add documentation for driver for SD/MMC hosts found on Allwinner sunxi SoCs   David Lanzendörfer
• [PATCH v6 0/8] ARM: sunxi: Add driver for SD/MMC hosts found on allwinner sunxi SOCs   David Lanzendörfer
• [PATCH v6 1/8] clk: sunxi: factors: automatic reparenting support   David Lanzendörfer
• [PATCH v6 2/8] clk: sunxi: Implement MMC phase control   David Lanzendörfer
• [PATCH v6 3/8] ARM: sunxi: clk: export clk_sunxi_mmc_phase_control   David Lanzendörfer
• [PATCH v6 4/8] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   David Lanzendörfer
• [PATCH v6 5/8] ARM: dts: sun7i: Add support for mmc   David Lanzendörfer
• [PATCH v6 6/8] ARM: dts: sun4i: Add support for mmc   David Lanzendörfer
• [PATCH v6 7/8] ARM: dts: sun5i: Add support for mmc   David Lanzendörfer
• [PATCH v6 8/8] ARM: sunxi: Add documentation for driver for SD/MMC hosts found on Allwinner sunxi SoCs   David Lanzendörfer
• [linux-sunxi] [PATCH v6 4/8] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   David Lanzendörfer
• [linux-sunxi] [PATCH v6 4/8] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   David Lanzendörfer
• [PATCH v7 0/8] ARM: sunxi: Add driver for SD/MMC hosts found on allwinner sunxi SOCs   David Lanzendörfer
• [PATCH v7 1/8] clk: sunxi: factors: automatic reparenting support   David Lanzendörfer
• [PATCH v7 2/8] clk: sunxi: Implement MMC phase control   David Lanzendörfer
• [PATCH v7 3/8] ARM: sunxi: clk: export clk_sunxi_mmc_phase_control   David Lanzendörfer
• [PATCH v7 4/8] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   David Lanzendörfer
• [PATCH v7 5/8] ARM: dts: sun7i: Add support for mmc   David Lanzendörfer
• [PATCH v7 6/8] ARM: dts: sun4i: Add support for mmc   David Lanzendörfer
• [PATCH v7 7/8] ARM: dts: sun5i: Add support for mmc   David Lanzendörfer
• [PATCH v7 8/8] ARM: sunxi: Add documentation for driver for SD/MMC hosts found on Allwinner sunxi SoCs   David Lanzendörfer
• [PATCH v7 8/8] ARM: sunxi: Add documentation for driver for SD/MMC hosts found on Allwinner sunxi SoCs   David Lanzendörfer
• [PATCH v4 02/10] ARM/ARM64: KVM: Add base for PSCI v0.2 emulation   Jungseok Lee
• [PATCH v4 02/10] ARM/ARM64: KVM: Add base for PSCI v0.2 emulation   Jungseok Lee
• [PATCH v4 02/10] ARM/ARM64: KVM: Add base for PSCI v0.2 emulation   Jungseok Lee
• [PATCH v4 02/10] ARM/ARM64: KVM: Add base for PSCI v0.2 emulation   Jungseok Lee
• [RFC PATCH V2 3/4] arm64: mm: Enable HAVE_RCU_TABLE_FREE logic   Ming Lei
• [RFC PATCH V2 4/4] arm64: mm: implement get_user_pages_fast   Ming Lei
• [PATCH RFC v1 2/3] Fix hibernation restore hang in freeze_processes   Ming Lei
• [PATCH 1/2] clocksource: sunxi: Add new compatibles   Daniel Lezcano
• [PATCH 1/2] clocksource: sunxi: Add new compatibles   Daniel Lezcano
• [PATCH v5 02/20] clocksource: orion: Use atomic access for shared registers   Daniel Lezcano
• [PATCH v6 01/19] clocksource: orion: Use atomic access for shared registers   Daniel Lezcano
• [PATCH v6 01/19] clocksource: orion: Use atomic access for shared registers   Daniel Lezcano
• [PATCH 2/5] clocksource: qcom: Move clocksource code out of mach-msm   Daniel Lezcano
• [PATCH v2 0/2] clocksource: sunxi: Change compatibles pattern   Daniel Lezcano
• [PATCH v6 0/3] Introduce clocksource driver for Keystone platform   Daniel Lezcano
• [PATCH v6 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Daniel Lezcano
• [PATCH v6 2/3] clocksource: keystone: add bindings for keystone timer   Daniel Lezcano
• [PATCH 0/2] Marvell Armada 375 and 38x timer support   Daniel Lezcano
• [PATCH 0/2] Marvell Armada 375 and 38x timer support   Daniel Lezcano
• [PATCH 0/2] Marvell Armada 375 and 38x timer support   Daniel Lezcano
• [PATCH v4 12/13] cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoC   Daniel Lezcano
• [PATCH v6 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Daniel Lezcano
• [PATCH 1/2] clocksource: orion: Use atomic access for shared registers   Daniel Lezcano
• [PATCH 2/2] clocksource: armada-370-xp: Use atomic access for shared registers   Daniel Lezcano
• [PATCH 2/2] clocksource: armada-370-xp: Use atomic access for shared registers   Daniel Lezcano
• [PATCH 2/2] clocksource: armada-370-xp: Use atomic access for shared registers   Daniel Lezcano
• [Patch v3 18/23] drivers: Enable building of Kirkwood drivers for mach-mvebu   Daniel Lezcano
• [PATCH v4 0/4] ARM: zynq: cpufreq support   Daniel Lezcano
• [PATCH 0/4] Add audio card support for Vybird-TWR board   Xiubo Li
• [PATCH 1/4] ARM: dts: Add Freescale SAI ALSA SoC Digital Audio Interface node for VF610.   Xiubo Li
• [PATCH 2/4] ARM: dts: Enable SAI ALSA SoC DAI device for Vybrid VF610 TOWER board.   Xiubo Li
• [PATCH 3/4] ARM: dts: Enable SGTL5000 codec based audio driver node for VF610 TOWER.   Xiubo Li
• [PATCH 4/4] ARM: dts: Add simple-card support for Vybird-TWR board   Xiubo Li
• [PATCH v2 0/4] Add audio card DT node support for Vybird-TWR board   Xiubo Li
• [PATCH v2 1/4] ARM: dts: vf610: Add edma mux Tx and Rx support for SAI node.   Xiubo Li
• [PATCH v2 2/4] ARM: dts: vf610-twr: Enable SAI ALSA SoC DAI device   Xiubo Li
• [PATCH v2 3/4] ARM: dts: vf610-twr: Enable SGTL5000 codec.   Xiubo Li
• [PATCH v2 4/4] ARM: dts: vf610-twr: Add simple-card support.   Xiubo Li
• [PATCH RFC 26/46] drivers/base: provide an infrastructure for componentised subsystems   Guennadi Liakhovetski
• [PATCH V6] kbuild: dtbs_install: new make target   Grant Likely
• [RFC PATCH 3/9] of: mtd: add NAND timings retrieval support   Grant Likely
• [PATCH v4] of: add functions to count number of elements in a property   Grant Likely
• [PATCH v2 08/11] of: Increase MAX_PHANDLE_ARGS   Grant Likely
• [PATCH v2 08/11] of: Increase MAX_PHANDLE_ARGS   Grant Likely
• [PATCH v2 5/5] of: document bindings for reserved-memory nodes   Grant Likely
• [PATCH v2 4/5] ARM: init: add support for reserved memory defined by device tree   Grant Likely
• [PATCH v2 1/5] drivers: of: add initialization code for reserved memory   Grant Likely
• [PATCH v2 3/5] drivers: of: implement reserved-memory handling for cma   Grant Likely
• [PATCH v7 2/7] dt-bindings: sram: describe option to reserve parts of the memory   Grant Likely
• [RFC PATCH v2 03/14] of: mtd: add documentation for nand-ecc-level property   Grant Likely
• [PATCH v4] of: add functions to count number of elements in a property   Grant Likely
• [PATCH v4] of: add functions to count number of elements in a property   Grant Likely
• [PATCH v7 2/7] dt-bindings: sram: describe option to reserve parts of the memory   Grant Likely
• [PATCHv2 2/2] arm: Get rid of meminfo   Grant Likely
• [PATCH v2 4/5] ARM: init: add support for reserved memory defined by device tree   Grant Likely
• [PATCH v2 4/5] ARM: init: add support for reserved memory defined by device tree   Grant Likely
• [PATCH v2 1/5] drivers: of: add initialization code for reserved memory   Grant Likely
• [PATCH 06/11] ARM: mvebu: add Armada 380/385 support to the system-controller driver   Grant Likely
• [PATCH 1/2] OF: update stdout-path parsing   Grant Likely
• [PATCH v2 1/5] drivers: of: add initialization code for reserved memory   Grant Likely
• [RFC/PATCH 1/3] of: Add early randomness hooks   Grant Likely
• [RFC/PATCH 2/3] arm: Add ARCH_WANT_OF_RANDOMNESS   Grant Likely
• [RFC/PATCH 0/3] Add devicetree scanning for randomness   Grant Likely
• [RFC PATCH v2 03/14] of: mtd: add documentation for nand-ecc-level property   Grant Likely
• [PATCH v2 1/5] drivers: of: add initialization code for reserved memory   Grant Likely
• [PATCH v2 1/5] drivers: of: add initialization code for reserved memory   Grant Likely
• [RFC/PATCH 0/3] Add devicetree scanning for randomness   Grant Likely
• [PATCH v3 2/6] drivers: of: add initialization code for reserved memory   Grant Likely
• [PATCH v3 3/6] drivers: of: implement reserved-memory handling for dma   Grant Likely
• [PATCH] dt: platform driver: Fill the resources before probe and defer if needed   Grant Likely
• [PATCH v3 2/6] drivers: of: add initialization code for reserved memory   Grant Likely
• [PATCH v4 1/7] drivers: of: add initialization code for reserved memory   Grant Likely
• [PATCH RFC v1 3/3] clk: Add handling of clk parent and rate assigned from DT   Grant Likely
• [PATCH] dt: platform driver: Fill the resources before probe and defer if needed   Grant Likely
• [PATCH 0/2] Translate of PCI address without PCI enabled   Grant Likely
• [PATCH v4 1/7] drivers: of: add initialization code for reserved memory   Grant Likely
• [PATCH v5 01/11] of: document bindings for reserved-memory nodes   Grant Likely
• [PATCH v5 02/11] drivers: of: add initialization code for static reserved memory   Grant Likely
• [PATCH v5 03/11] drivers: of: add initialization code for dynamic reserved memory   Grant Likely
• [PATCH v5 06/11] drivers: of: initialize and assign reserved memory to newly created devices   Grant Likely
• [RFC] ARM VM System Sepcification   Grant Likely
• [PATCH v3 3/6] misc: fuse: Add efuse driver for Tegra   Jim Lin
• [PATCH 00/26] OMAP dma engine rework   Tony Lindgren
• [PATCH] ARM: OMAP4: sleep: byteswap data for big-endian   Tony Lindgren
• [PATCH] ARM: dts: omap3-gta04: Add EOC irq gpio line handling.   Tony Lindgren
• [PATCH 0/2] ARM: DTS: am335x-evmsk: Audio and MMC1 fix (for 3.13?)   Tony Lindgren
• [PATCH] arm: omap1: fix build when !CONFIG_OMAP_32K_TIMER   Tony Lindgren
• [PATCH] arm: dtsi: am335x-bone-common, usb0 is peripheral only   Tony Lindgren
• [PATCH] ARM: OMAP2+: add missing ARCH_HAS_OPP   Tony Lindgren
• [PATCH 2/2] ARM: OMAP2+: fix dpll round_rate() to actually round   Tony Lindgren
• [PATCH] mmc: omap_hsmmc: Add support for Erratum 2.1.1.128 in device tree boot   Tony Lindgren
• [PATCH 1/9] ARM: dts: omap3-gta04: Fix 'aux' gpio key flags.   Tony Lindgren
• [PATCH 3/9] ARM: dts: omap3-gta04: Fix mmc1 properties.   Tony Lindgren
• [PATCH] ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT   Tony Lindgren
• [PATCH] ARM: OMAP3+: DPLL: stop reparenting to same parent if already done   Tony Lindgren
• [PATCH V2 4/4] ARM: OMAP2+: AM43x: Use gptimer as clocksource   Tony Lindgren
• [PATCH] ARM: OMAP1: nokia770: enable tahvo-usb   Tony Lindgren
• [PATCH 1/2] ARM: dts: N9/N950: fix boot hang with 3.14-rc1   Tony Lindgren
• [PATCH] arm: dtsi: am335x-bone-common, usb0 is peripheral only   Tony Lindgren
• [PATCH] ARM: OMAP2+: Remove MACH_NOKIA_N800   Tony Lindgren
• [PATCH] ARM: OMAP2+: Remove legacy macros for zoom platforms   Tony Lindgren
• [PATCH v2 0/4] ARM: dts: Fixes for Overo/Tobi against 3.14-rc2   Tony Lindgren
• [PATCH] arm: dtsi: am335x-bone-common, usb0 is peripheral only   Tony Lindgren
• [PATCH V2 1/2] mmc: omap_hsmmc: Add support for quirky omap3 hsmmc controller   Tony Lindgren
• [PATCH v2 4/4] Documentation: dt: OMAP: Update Overo/Tobi   Tony Lindgren
• [PATCH] pinctrl: single: add low powr mode support   Tony Lindgren
• [GIT PULL] omap fixes against v3.14-rc1   Tony Lindgren
• [PATCH 1/5] ARM: omap2: cm-t35: Add regulators and clock for camera sensor   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: clock/PRCM/hwmod fixes for v3.14-rc   Tony Lindgren
• [PATCH 1/1] ARM: OMAP: Kill warning in CPUIDLE code with !CONFIG_SMP   Tony Lindgren
• [PATCH v2 0/2] ARM: OMAP4: Fix gpmc_fck clock   Tony Lindgren
• [patch 08/26] arm: Replace various irq_desc accesses   Tony Lindgren
• [PATCHv2 04/16] iommu/omap: add devicetree support   Tony Lindgren
• [PATCHv2 08/16] ARM: OMAP3: remove deprecated CONFIG_OMAP_IOMMU_IVA2   Tony Lindgren
• [PATCHv2 08/16] ARM: OMAP3: remove deprecated CONFIG_OMAP_IOMMU_IVA2   Tony Lindgren
• [PATCHv2 10/16] ARM: OMAP2+: use pdata quirks for iommu reset lines   Tony Lindgren
• [PATCHv2 14/16] ARM: OMAP3: hwmod data: cleanup data for IOMMUs   Tony Lindgren
• [PATCH] ARM: OMAP3: Fix pinctrl interrupts for core2   Tony Lindgren
• [GIT PULL] omap fixes for v3.14-rc4   Tony Lindgren
• [PATCHv2 14/16] ARM: OMAP3: hwmod data: cleanup data for IOMMUs   Tony Lindgren
• [PATCH v3 1/2] CLK: TI: OMAP4/5/DRA7: Remove gpmc_fck from dummy clocks   Tony Lindgren
• [PATCH 00/12] ARM: OMAP2 DT clock conversion   Tony Lindgren
• [PATCH 00/12] ARM: OMAP2 DT clock conversion   Tony Lindgren
• [PATCH 1/1] ARM: dts: omap3-igep: fix boot fail due wrong compatible match   Tony Lindgren
• [PATCH 1/1] ARM: dts: omap3-igep: fix boot fail due wrong compatible match   Tony Lindgren
• [PATCH V5 2/4] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP   Tony Lindgren
• [PATCH v2] ARM: dts: tps65910 backup battery regulator   Tony Lindgren
• [PATCH v2 0/3] OMAP2+: hwmod: Add support to parse clock info from DT   Tony Lindgren
• [RFC PATCH v1 0/2] clock and HWMOD changes for USIM module   Tony Lindgren
• [PATCH 00/11] ARM: dts: sbc-t3x: add support for more boards   Tony Lindgren
• [PATCH 0/3] OMAP hwspinlock DT updates   Tony Lindgren
• [PATCH] ARM: dts: add BeagleBone Audio Cape (Rev A) dtsi   Tony Lindgren
• [PATCH 0/9] ARM: DTS: OMAP: Audio related cleanups for dtsi and dts files   Tony Lindgren
• [PATCH 5/9] ARM: dts: omap3-gta04: Add basic sound support.   Tony Lindgren
• [PATCH v4 4/4] ARM: OMAP2+: Add pdata quirk for sys_clkout2 for omap3 DBB056   Tony Lindgren
• [PATCH v4 3/4] ARM: OMAP2+: add legacy display for omap3 DBB056   Tony Lindgren
• [PATCH 2/2] ARM: dts: OMAP3+: add clock nodes for CPU   Tony Lindgren
• [PATCH 5/5] ARM: dts: AM33XX: Add ecap interrupt properties   Tony Lindgren
• [PATCH 1/3] arm: dts: am33xx.dtsi: Add node name to rtc device node   Tony Lindgren
• [PATCH 5/9] ARM: dts: omap3-gta04: Add basic sound support.   Tony Lindgren
• [PATCH 3/4] clk: ti: add support for default-rate property from DT   Tony Lindgren
• [PATCH] ARM: OMAP2+: Use pdata quirks for wl12xx on the AM335x EV-MSK   Tony Lindgren
• [PATCH v9 0/9] USB Host support for OMAP5 uEVM   Tony Lindgren
• [PATCH] ARM: dts: am335x-evmsk: enable USB1   Tony Lindgren
• [PATCHv3 00/13] OMAP IOMMU DT adaptation for 3.15   Tony Lindgren
• [PATCH] ARM: OMAP2+: Use pdata quirks for wl12xx on the AM335x EV-MSK   Tony Lindgren
• [PATCH V2 4/4] ARM: OMAP2+: AM43x: Use gptimer as clocksource   Tony Lindgren
• [PATCH] arm: omap: remove OMAP_PACKAGE_ZAC and OMAP_PACKAGE_ZAF   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: PRCM/hwmod/clock non-regression fixes and optimizations for v3.15   Tony Lindgren
• [PATCH v4 2/5] arm: add new asm macro update_sctlr   Leif Lindholm
• [PATCH v4 2/5] arm: add new asm macro update_sctlr   Leif Lindholm
• [PATCH v4 2/5] arm: add new asm macro update_sctlr   Leif Lindholm
• [PATCHv2 2/2] arm: Get rid of meminfo   Leif Lindholm
• [PATCH 00/22] arm/arm64: UEFI stubs + runtime services   Leif Lindholm
• [PATCH 01/22] arm: break part of __soft_restart out into separate function   Leif Lindholm
• [PATCH 02/22] arm: add new asm macro update_sctlr   Leif Lindholm
• [PATCH 03/22] efi: add helper function to get UEFI params from FDT   Leif Lindholm
• [PATCH 04/22] efi-stub.txt updates for ARM   Leif Lindholm
• [PATCH 05/22] Add shared printk wrapper for consistent prefixing   Leif Lindholm
• [PATCH 06/22] Add helper functions used by arm/arm64   Leif Lindholm
• [PATCH 07/22] Add shared FDT related functions for ARM/ARM64   Leif Lindholm
• [PATCH 08/22] Add strstr to compressed string.c for ARM.   Leif Lindholm
• [PATCH 09/22] Add shared arm/arm64 EFI stub   Leif Lindholm
• [PATCH 10/22] Add EFI stub for ARM   Leif Lindholm
• [PATCH 11/22] Disable stack protection for decompressor/stub   Leif Lindholm
• [PATCH 12/22] Documentation: arm: add UEFI support documentation   Leif Lindholm
• [PATCH 13/22] arm: Add [U]EFI runtime services support   Leif Lindholm
• [PATCH 14/22] init: efi: arm: enable (U)EFI runtime services on arm   Leif Lindholm
• [PATCH 15/22] lib: add fdt_empty_tree.c   Leif Lindholm
• [PATCH 16/22] arm64: Add function to create identity mappings   Leif Lindholm
• [PATCH 17/22] arm64: add EFI stub   Leif Lindholm
• [PATCH 18/22] doc: arm64: add description of EFI stub support   Leif Lindholm
• [PATCH 19/22] arm64: add EFI runtime services   Leif Lindholm
• [PATCH 20/22] Improve cmdline conversion   Leif Lindholm
• [PATCH 21/22] arm: efistub: ignore dtb= when UEFI SecureBoot is enabled   Leif Lindholm
• [PATCH 22/22] arm: update boot/compressed/.gitignore   Leif Lindholm
• [PATCH v4 4/6] arm: add early_ioremap support   Leif Lindholm
• [RFC] ARM VM System Sepcification   Leif Lindholm
• [PATCH 0/3] RFC/RFT: Powering on MMC Wifi/BT modules in MMC core   Russell King - ARM Linux
• NFS client broken in Linus' tip   Russell King - ARM Linux
• [PATCH v5 00/23]   Russell King - ARM Linux
• [PATCH v5 02/23] drm/i2c: tda998x: check more I/O errors   Russell King - ARM Linux
• [PATCH v5 09/23] drm/i2c: tda998x: don't read write-only registers   Russell King - ARM Linux
• [PATCH v5 02/23] drm/i2c: tda998x: check more I/O errors   Russell King - ARM Linux
• [PATCH v5 09/23] drm/i2c: tda998x: don't read write-only registers   Russell King - ARM Linux
• [PATCH v5 00/23]   Russell King - ARM Linux
• [PATCH v5 00/23]   Russell King - ARM Linux
• [PATCH v5 00/23]   Russell King - ARM Linux
• NFS client broken in Linus' tip   Russell King - ARM Linux
• [ath9k-devel] [PATCH 1/3] ath9k: Fix build error on ARM   Russell King - ARM Linux
• [ath9k-devel] [PATCH 1/3] ath9k: Fix build error on ARM   Russell King - ARM Linux
• [ath9k-devel] [PATCH 1/3] ath9k: Fix build error on ARM   Russell King - ARM Linux
• [ath9k-devel] [PATCH 1/3] ath9k: Fix build error on ARM   Russell King - ARM Linux
• [PATCH] ARM: mm: Fix the memblock allocation for LPAE machines   Russell King - ARM Linux
• [PATCH] ARM: mm: Fix the memblock allocation for LPAE machines   Russell King - ARM Linux
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Russell King - ARM Linux
• [PATCH] ARM: enable IRQs in user undefined instruction vector   Russell King - ARM Linux
• [PATCH RFC 26/46] drivers/base: provide an infrastructure for componentised subsystems   Russell King - ARM Linux
• [PATCH] ARM: enable IRQs in user undefined instruction vector   Russell King - ARM Linux
• [PATCH RFC 26/46] drivers/base: provide an infrastructure for componentised subsystems   Russell King - ARM Linux
• [PATCH RFC 0/2] drivers/base: simplify simple DT-based components   Russell King - ARM Linux
• [PATCH RFC 1/2] drivers/base: permit base components to omit the bind/unbind ops   Russell King - ARM Linux
• [PATCH RFC 2/2] drivers/base: declare phandle DT nodes as components   Russell King - ARM Linux
• [PATCH RFC 0/2] drivers/base: simplify simple DT-based components   Russell King - ARM Linux
• [PATCH RFC 0/2] drivers/base: simplify simple DT-based components   Russell King - ARM Linux
• [PATCH RFC 0/2] drivers/base: simplify simple DT-based components   Russell King - ARM Linux
• [PATCH RFC 0/2] drivers/base: simplify simple DT-based components   Russell King - ARM Linux
• [RFC/PATCH v2] ARM: vDSO gettimeofday using generic timer architecture   Russell King - ARM Linux
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Russell King - ARM Linux
• [PATCH] staging: drm/imx: remove an unnecessary local variable   Russell King - ARM Linux
• [PATCH] staging: drm/imx: remove an unnecessary local variable   Russell King - ARM Linux
• [PATCH RFC v2 00/35] Second preview of imx-drm cleanup series   Russell King - ARM Linux
• [PATCH v3 1/2] drivers/base: permit base components to omit the bind/unbind ops   Russell King - ARM Linux
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Russell King - ARM Linux
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Russell King - ARM Linux
• [PATCH v3 1/2] drivers/base: permit base components to omit the bind/unbind ops   Russell King - ARM Linux
• [PATCH RFC v2 00/35] Second preview of imx-drm cleanup series   Russell King - ARM Linux
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Russell King - ARM Linux
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Russell King - ARM Linux
• [PATCH 00/26] OMAP dma engine rework   Russell King - ARM Linux
• [RFC PATCH 2/3] staging: imx-drm-core: Use graph to find connection between crtc and encoder   Russell King - ARM Linux
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Russell King - ARM Linux
• [RFC/PATCH v2] ARM: vDSO gettimeofday using generic timer architecture   Russell King - ARM Linux
• [PATCH RFC v2 00/35] Second preview of imx-drm cleanup series   Russell King - ARM Linux
• [PATCH 0/7] primecell: make correct clock parsing possible   Russell King - ARM Linux
• [PATCH 4/7] spi: pl022: attempt to get sspclk by name   Russell King - ARM Linux
• [BUG] Circular locking dependency - DRM/CMA/MM/hotplug/...   Russell King - ARM Linux
• [PATCH RFC v2 00/35] Second preview of imx-drm cleanup series   Russell King - ARM Linux
• [PATCH 0/3] arm64: Use pte manipulation functions for THP   Russell King - ARM Linux
• [PATCH RFC v2 00/35] Second preview of imx-drm cleanup series   Russell King - ARM Linux
• [PATCH v2] ARM: Add imprecise abort enable/disable macro   Russell King - ARM Linux
• [BUG] Circular locking dependency - DRM/CMA/MM/hotplug/...   Russell King - ARM Linux
• [BUG] Circular locking dependency - DRM/CMA/MM/hotplug/...   Russell King - ARM Linux
• [PATCH 0/3] RFC/RFT: Powering on MMC Wifi/BT modules in MMC core   Russell King - ARM Linux
• [PATCH 1/3] mmc: add support for power-on sequencing through DT   Russell King - ARM Linux
• [PATCH] pci: Add support for creating a generic host_bridge from device tree   Russell King - ARM Linux
• [PATCH 1/3] mmc: add support for power-on sequencing through DT   Russell King - ARM Linux
• [PATCH] Fix uses of dma_max_pfn() when converting to a limiting address   Russell King - ARM Linux
• [PATCH] drm/i2c: tda998x: fix memory leak in case of i2c error   Russell King - ARM Linux
• [PATCH] Fix uses of dma_max_pfn() when converting to a limiting address   Russell King - ARM Linux
• [PATCH 0/6] ARM: integrator: multiplatform advancements   Russell King - ARM Linux
• [PATCH v3] ARM: mm: report both sections from PMD   Russell King - ARM Linux
• [PATCH 1/3] mmc: add support for power-on sequencing through DT   Russell King - ARM Linux
• [PATCH 1/3] mmc: add support for power-on sequencing through DT   Russell King - ARM Linux
• [PATCH 1/3] mmc: add support for power-on sequencing through DT   Russell King - ARM Linux
• Recent 3.x kernels: Memory leak causing OOMs   Russell King - ARM Linux
• Recent 3.x kernels: Memory leak causing OOMs   Russell King - ARM Linux
• [PATCH] Fix uses of dma_max_pfn() when converting to a limiting address   Russell King - ARM Linux
• [PATCH] arm64: Add pdev_archdata for dmamask   Russell King - ARM Linux
• Recent 3.x kernels: Memory leak causing OOMs   Russell King - ARM Linux
• [PATCH RFC v2 00/35] Second preview of imx-drm cleanup series   Russell King - ARM Linux
• [BUG] Circular locking dependency - DRM/CMA/MM/hotplug/...   Russell King - ARM Linux
• [PATCH RFC 00/31] SDHCI and SDIO IRQ improvements   Russell King - ARM Linux
• [PATCH] ARM: kernel: improve error message when LPAE config doesn't match CPU   Russell King - ARM Linux
• [PATCH v3 2/3] ARM: bios32: use pci_enable_resource to enable PCI resources   Russell King - ARM Linux
• [PATCH V2] arm: mm: Remove hugetlb warning from Coherent DMA allocator   Russell King - ARM Linux
• [PATCH 03/17] mmc: mmci: Mask IRQs for all variants during runtime suspend   Russell King - ARM Linux
• [PATCH 03/17] mmc: mmci: Mask IRQs for all variants during runtime suspend   Russell King - ARM Linux
• [PATCH RFC 07/31] mmc: sdhci: push card_tasklet into threaded irq handler   Russell King - ARM Linux
• [PATCH 00/34] imx-drm stuff again   Russell King - ARM Linux
• [PATCHv4 2/2] arm: Get rid of meminfo   Russell King - ARM Linux
• [PATCH 01/17] amba: Let runtime PM callbacks be available for CONFIG_PM   Russell King - ARM Linux
• [PATCH RFC 07/31] mmc: sdhci: push card_tasklet into threaded irq handler   Russell King - ARM Linux
• [PATCH RFC 03/31] mmc: sdio_irq: rework sdio irq handling   Russell King - ARM Linux
• [PATCH RFC 07/31] mmc: sdhci: push card_tasklet into threaded irq handler   Russell King - ARM Linux
• [PATCH RFC 07/31] mmc: sdhci: push card_tasklet into threaded irq handler   Russell King - ARM Linux
• [PATCH RESEND v3] clk: return probe defer when DT clock not yet ready   Russell King - ARM Linux
• [PATCH RFC 31/31] mmc: sdhci-tegra: get rid of special PRESENT_STATE register handling   Russell King - ARM Linux
• [PATCH RFC 31/31] mmc: sdhci-tegra: get rid of special PRESENT_STATE register handling   Russell King - ARM Linux
• [PATCH RFC 07/31] mmc: sdhci: push card_tasklet into threaded irq handler   Russell King - ARM Linux
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Russell King - ARM Linux
• [PATCH RFC 07/31] mmc: sdhci: push card_tasklet into threaded irq handler   Russell King - ARM Linux
• [RFC PATCH 2/2] arm: mm: Double logical invert for LPAE pte_write(), pte_dirty()   Russell King - ARM Linux
• [PATCH 2/2] ARM: mm: keep rodata non-executable   Russell King - ARM Linux
• [PATCH] ARM: EDMA: Use platform_get_resource functions for DT   Russell King - ARM Linux
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Russell King - ARM Linux
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Russell King - ARM Linux
• [PATCH RFC v1 1/3] ARM: Add irq disabled version of soft_restart.   Russell King - ARM Linux
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Russell King - ARM Linux
• randconfig build error   Russell King - ARM Linux
• [PATCH RFC 07/31] mmc: sdhci: push card_tasklet into threaded irq handler   Russell King - ARM Linux
• [RFC PATCH v3 1/9] staging: imx-drm-core: don't request probe deferral in imx_drm_encoder_parse_of   Russell King - ARM Linux
• [RFC PATCH v3 2/9] staging: imx-drm: Add temporary copies of v4l2-of parsing functions   Russell King - ARM Linux
• [PATCH 1/5] clk: sun6i: Protect CPU clock   Russell King - ARM Linux
• [RFC PATCH v3 1/9] staging: imx-drm-core: don't request probe deferral in imx_drm_encoder_parse_of   Russell King - ARM Linux
• [PATCH 2/2] ARM: dts: duovero-parlor: Add HDMI output   Russell King - ARM Linux
• Ideas/suggestions to avoid repeated locking and reducing too many lists with dmaengine?   Russell King - ARM Linux
• [GIT PULL] imx-drm conversion to component support   Russell King - ARM Linux
• [PATCH 1/5] clk: sun6i: Protect CPU clock   Russell King - ARM Linux
• DMABOUNCE in pci-rcar   Russell King - ARM Linux
• Ideas/suggestions to avoid repeated locking and reducing too many lists with dmaengine?   Russell King - ARM Linux
• Ideas/suggestions to avoid repeated locking and reducing too many lists with dmaengine?   Russell King - ARM Linux
• [PATCH 2/2] ARM: dts: duovero-parlor: Add HDMI output   Russell King - ARM Linux
• [PATCH 2/2] ARM: dts: duovero-parlor: Add HDMI output   Russell King - ARM Linux
• SA110 MMU problem, any hints?   Russell King - ARM Linux
• build error on 3.14-rc4 with SPLIT_PTLOCK_CPUS <= NR_CPUS and !MMU   Russell King - ARM Linux
• [PATCH] scripts/link-vmlinux.sh: correct base address for some ARM special cases   Russell King - ARM Linux
• [PATCH 2/2] ARM: dts: duovero-parlor: Add HDMI output   Russell King - ARM Linux
• [PATCH] ARM: move __fixup_smp out of init section   Russell King - ARM Linux
• [PATCH 2/2] ARM: dts: duovero-parlor: Add HDMI output   Russell King - ARM Linux
• [PATCH] scripts/link-vmlinux.sh: correct base address for some ARM special cases   Russell King - ARM Linux
• [PATCH] scripts/link-vmlinux.sh: correct base address for some ARM special cases   Russell King - ARM Linux
• [PATCH 4/5] mfd: remove obsolete ti-ssp driver   Russell King - ARM Linux
• [PATCH 2/4] ARM: imx6: build headsmp.o only on CONFIG_SMP   Russell King - ARM Linux
• [PATCH RFC 26/46] drivers/base: provide an infrastructure for componentised subsystems   Russell King - ARM Linux
• [PATCH] Documentation: clk: Add locking documentation   Russell King - ARM Linux
• [PATCH v4 1/2] ARM: avoid tracers in soft_restart   Russell King - ARM Linux
• [RFC PATCH v4 3/8] staging: imx-drm: Document updated imx-drm device tree bindings   Russell King - ARM Linux
• [RFC PATCH v4 3/8] staging: imx-drm: Document updated imx-drm device tree bindings   Russell King - ARM Linux
• [RFC PATCH v4 3/8] staging: imx-drm: Document updated imx-drm device tree bindings   Russell King - ARM Linux
• [PATCH] Documentation: clk: Add locking documentation   Russell King - ARM Linux
• [PATCH v6 07/14] ARM: Remove use of struct kprobe from generic probes code   Russell King - ARM Linux
• [PATCH v6 2/2] ARM hibernation / suspend-to-disk   Russell King - ARM Linux
• [PATCH 3/9] Doc/DT: Add DT binding documentation for DVI Connector   Russell King - ARM Linux
• [PATCH 4/9] Doc/DT: Add DT binding documentation for HDMI Connector   Russell King - ARM Linux
• [PATCH 9/9] Doc/DT: Add DT binding documentation for tpd12s015 encoder   Russell King - ARM Linux
• [PATCH 3/9] Doc/DT: Add DT binding documentation for DVI Connector   Russell King - ARM Linux
• [PATCH 0/9] Doc/DT: DT bindings for various display components   Russell King - ARM Linux
• [PATCH 4/9] Doc/DT: Add DT binding documentation for HDMI Connector   Russell King - ARM Linux
• [PATCH 0/9] Doc/DT: DT bindings for various display components   Russell King - ARM Linux
• [PATCH 0/9] Doc/DT: DT bindings for various display components   Russell King - ARM Linux
• [PATCH v7 08/15] ahci-imx: Port to library-ised ahci_platform   Russell King - ARM Linux
• [PATCH] ARM: tegra: dalmore: fix irq trigger type   Joseph Lo
• [PATCH v5 05/16] ARM: use a function table for determining instruction interpreter action   David Long
• [PATCH v5 07/16] ARM: Remove use of struct kprobe from generic probes code   David Long
• [PATCH v5 16/16] ARM: Remove uprobes dependency on kprobes   David Long
• [PATCH v6 00/14] uprobes: Add uprobes support for ARM   David Long
• [PATCH v6 01/14] uprobes: allow ignoring of probe hits   David Long
• [PATCH v6 02/14] ARM: move shared uprobe/kprobe definitions into new include file   David Long
• [PATCH v6 03/14] ARM: Move generic arm instruction parsing code to new files for sharing between features   David Long
• [PATCH v6 04/14] ARM: move generic thumb instruction parsing code to new files for use by other feature   David Long
• [PATCH v6 05/14] ARM: use a function table for determining instruction interpreter action   David Long
• [PATCH v6 06/14] ARM: Disable jprobes test when built into thumb-mode kernel   David Long
• [PATCH v6 07/14] ARM: Remove use of struct kprobe from generic probes code   David Long
• [PATCH v6 08/14] ARM: Make the kprobes condition_check symbol names more generic   David Long
• [PATCH v6 09/14] ARM: Change more ARM kprobes symbol names to something more   David Long
• [PATCH v6 10/14] ARM: Rename the shared kprobes/uprobe return value enum   David Long
• [PATCH v6 11/14] ARM: Change the remaining shared kprobes/uprobes symbols to something generic   David Long
• [PATCH v6 12/14] ARM: Add an emulate flag to the kprobes/uprobes instruction decode functions   David Long
• [PATCH v6 13/14] ARM: Make arch_specific_insn a define for new arch_probes_insn structure   David Long
• [PATCH v6 14/14] ARM: add uprobes support   David Long
• [PATCH 3/9] Doc/DT: Add DT binding documentation for DVI Connector   Warner Losh
• [PATCHv11 2/2] dma: Add Freescale eDMA engine driver support   Jingchang Lu
• [PATCH RESEND v11 0/2] dma: Add Freescale eDMA engine driver support   Jingchang Lu
• [PATCH RESEND v11 1/2] ARM: dts: vf610: Add eDMA node   Jingchang Lu
• [PATCH RESEND v11 2/2] dma: Add Freescale eDMA engine driver support   Jingchang Lu
• [PATCH] dma: fsl-edma: fix static checker warning of NULL dereference   Jingchang Lu
• [PATCH v2 00/21] pinctrl: mvebu: restructure and remove hardcoded addresses from Dove pinctrl   Andrew Lunn
• [PATCH] PCI: MVEBU: Use Device ID and revision from underlying endpoint   Andrew Lunn
• [PATCH] PCI: MVEBU: Use Device ID and revision from underlying endpoint   Andrew Lunn
• [PATCH 0/4] DT support for kirkwood based Synology NAS boxes   Andrew Lunn
• [PATCH 1/4] Power: Reset: Generalize qnap-poweroff to with on Synology devices.   Andrew Lunn
• [PATCH 2/4] DT: Vendor prefixes: Add ricoh, ssi and synology   Andrew Lunn
• [PATCH 3/4] DT: i2c: Trivial: Add sii,s35390a   Andrew Lunn
• [PATCH 4/4] ARM: Kirkwood: Add support for many Synology NAS devices   Andrew Lunn
• [PATCH 4/4] ARM: Kirkwood: Add support for many Synology NAS devices   Andrew Lunn
• [PATCH 4/4] ARM: Kirkwood: Add support for many Synology NAS devices   Andrew Lunn
• [PATCH 4/4] ARM: Kirkwood: Add support for many Synology NAS devices   Andrew Lunn
• [PATCH 00/21] Move DT kirkwood into mach-mvebu   Andrew Lunn
• [PATCH 01/21] ARM: Kirkwood: Give pm.c its own header file.   Andrew Lunn
• [PATCH 02/21] IRQ: Orion: Fix getting generic chip pointer.   Andrew Lunn
• [PATCH 03/21] ARM: Kirkwood: Convert mv88f6281gtw_ge switch setup to DT   Andrew Lunn
• [PATCH 04/21] ARM: Kirkwood: Drop printing the SoC type and revision   Andrew Lunn
• [PATCH 05/21] ARM: Kirkwood: Seperate board-dt from common and pcie code.   Andrew Lunn
• [PATCH 06/21] ARM: Kirkwood: ioremap the cpu_config register before using it.   Andrew Lunn
• [PATCH 07/21] ARM: Kirkwood: ioremap memory control register   Andrew Lunn
• [PATCH 08/21] ARM: MVEBU: Add ARCH_MULTI_V7 to SoCs   Andrew Lunn
• [PATCH 09/21] ARM: Orion: Move cache-feroceon-l2.h out of plat-orion   Andrew Lunn
• [PATCH 10/21] ARM: MM: Add DT binding for Feroceon L2 cache   Andrew Lunn
• [PATCH 11/21] ARM: Fix default CPU selection for ARCH_MULTI_V5   Andrew Lunn
• [PATCH 12/21] ARM: Fix MULTI_TLB for feroceon   Andrew Lunn
• [PATCH 13/21] ARM: MM Enable building Feroceon L2 cache controller with ARCH_MVEBU   Andrew Lunn
• [PATCH 14/21] ARM: Move kirkwood DT boards into mach-mvebu   Andrew Lunn
• [PATCH 15/21] ARM: MVEBU: Let kirkwood use the system controller for restart   Andrew Lunn
• [PATCH 16/21] drivers: Enable building of Kirkwood drivers for mach-mvebu   Andrew Lunn
• [PATCH 17/21] ARM: MVEBU: Enable mvebu-soc-id on Kirkwood   Andrew Lunn
• [PATCH 18/21] ARM: config: Add a multi_v5_defconfig   Andrew Lunn
• [PATCH 19/21] ARM: MVEBU: Simplifiy headers and make local   Andrew Lunn
• [PATCH 20/21] ARM: MVEBU: Remove unneeded headers   Andrew Lunn
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Andrew Lunn
• [PATCH 03/21] ARM: Kirkwood: Convert mv88f6281gtw_ge switch setup to DT   Andrew Lunn
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Andrew Lunn
• [PATCH 16/21] drivers: Enable building of Kirkwood drivers for mach-mvebu   Andrew Lunn
• [PATCH 19/21] ARM: MVEBU: Simplifiy headers and make local   Andrew Lunn
• [PATCH 10/21] ARM: MM: Add DT binding for Feroceon L2 cache   Andrew Lunn
• [PATCH 19/21] ARM: MVEBU: Simplifiy headers and make local   Andrew Lunn
• irqchip: irq-dove: problem with the PMU interrupt controller.   Andrew Lunn
• [PATCH 05/11] ARM: mvebu: add Device Tree for the Armada 375 DB board   Andrew Lunn
• [PATCH 07/11] ARM: mvebu: add initial support for the Armada 380/385 SOCs   Andrew Lunn
• [PATCH 6/6] dt: Update binding information for mvebu gating clocks with Armada 380/385   Andrew Lunn
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Andrew Lunn
• [PATCH] ARM: mvebu: rename mvebu_defconfig to mvebu_v7_defconfig   Andrew Lunn
• [PATCH] phy-core: Don't allow building phy-core as a module   Andrew Lunn
• [PATCH 2/3] ARM: mvebu: use GPIO DT defines in Armada 370/XP boards   Andrew Lunn
• Toggling gpio pins while powering down   Andrew Lunn
• [PATCH v2 00/23] Move DT kirkwood into mach-mvebu   Andrew Lunn
• [PATCH v2 01/23] ARM: Kirkwood: Give pm.c its own header file.   Andrew Lunn
• [PATCH v2 02/23] IRQ: Orion: Fix getting generic chip pointer.   Andrew Lunn
• [PATCH v2 03/23] ARM: Kirkwood: Convert mv88f6281gtw_ge switch setup to DT   Andrew Lunn
• [PATCH v2 04/23] ARM: Kirkwood: Drop printing the SoC type and revision   Andrew Lunn
• [PATCH v2 05/23] ARM: Kirkwood: Seperate board-dt from common and pcie code.   Andrew Lunn
• [PATCH v2 06/23] ARM: Kirkwood: ioremap the cpu_config register before using it.   Andrew Lunn
• [PATCH v2 07/23] ARM: Kirkwood: ioremap memory control register   Andrew Lunn
• [PATCH v2 08/23] ARM: MVEBU: Add ARCH_MULTI_V7 to SoCs   Andrew Lunn
• [PATCH v2 09/23] ARM: Orion: Move cache-feroceon-l2.h out of plat-orion   Andrew Lunn
• [PATCH v2 10/23] ARM: MM: Add DT binding for Feroceon L2 cache   Andrew Lunn
• [PATCH v2 11/23] ARM: Kirkwood: Instantiate L2 cache from DT.   Andrew Lunn
• [PATCH v2 12/23] ARM: Fix default CPU selection for ARCH_MULTI_V5   Andrew Lunn
• [PATCH v2 13/23] ARM: Fix MULTI_TLB for feroceon   Andrew Lunn
• [PATCH v2 14/23] ARM: MM Enable building Feroceon L2 cache controller with ARCH_MVEBU   Andrew Lunn
• [PATCH v2 15/23] ARM: Move kirkwood DT boards into mach-mvebu   Andrew Lunn
• [PATCH v2 16/23] ARM: MVEBU: Let kirkwood use the system controller for restart   Andrew Lunn
• [PATCH v2 17/23] ARM: MVEBU: Instantiate system controller in kirkwood.dtsi   Andrew Lunn
• [PATCH v2 18/23] drivers: Enable building of Kirkwood drivers for mach-mvebu   Andrew Lunn
• [PATCH v2 19/23] ARM: MVEBU: Enable mvebu-soc-id on Kirkwood   Andrew Lunn
• [PATCH v2 20/23] ARM: config: Add a multi_v5_defconfig   Andrew Lunn
• [PATCH v2 21/23] ARM: MVEBU: Simplifiy headers and make local   Andrew Lunn
• [PATCH v2 22/23] ARM: config: Add mvebu_v5_defconfig   Andrew Lunn
• [PATCH v2 23/23] ARM: Kirkwood: Remove DT support   Andrew Lunn
• [PATCH v2 00/23] Move DT kirkwood into mach-mvebu   Andrew Lunn
• [PATCH v2 0/4] DT support for kirkwood based Synology NAS boxes   Andrew Lunn
• [PATCH v2 1/4] Power: Reset: Generalize qnap-poweroff to with on Synology devices.   Andrew Lunn
• [PATCH v2 2/4] DT: Vender prefixes: Add ricoh, ssi and synology   Andrew Lunn
• [PATCH v2 3/4] DT: i2c: Trivial: Add sii, s35390a, fix ricoh vendor prefix   Andrew Lunn
• [PATCH v2 4/4] ARM: Kirkwood: Add support for many Synology NAS devices   Andrew Lunn
• [PATCH 0/2] Kirkwood RD88F6192 and RD88F6281 DT conversion   Andrew Lunn
• [PATCH 1/2] ARM: Kirkwood: Add DT description of rd88f6192.   Andrew Lunn
• [PATCH 2/2] ARM: Kirkwood: convert rd88f6281-setup.c to DT.   Andrew Lunn
• [PATCH v2 10/23] ARM: MM: Add DT binding for Feroceon L2 cache   Andrew Lunn
• [PATCH v2 05/23] ARM: Kirkwood: Seperate board-dt from common and pcie code.   Andrew Lunn
• [REGRESSION] 3.14-rc2 boot failure on Kirkwood (qnap ts-119p+)   Andrew Lunn
• [PATCH v4 2/4] DT: Vendor prefixes: Add ricoh, ssi and synology   Andrew Lunn
• [PATCH v2 10/23] ARM: MM: Add DT binding for Feroceon L2 cache   Andrew Lunn
• [PATCH] net: ethernet: remove unneeded dependency of mvneta and update help text   Andrew Lunn
• [PATCH] rtc: mv: reset date if after year 2038   Andrew Lunn
• [PATCH] rtc: mv: reset date if after year 2038   Andrew Lunn
• [PATCH v2 05/23] ARM: Kirkwood: Seperate board-dt from common and pcie code.   Andrew Lunn
• [PATCH v5 4/5] ARM: Kirkwood: Fix qnap vendor prefix   Andrew Lunn
• [Patch v3 00/23] Move DT kirkwood into mach-mvebu   Andrew Lunn
• [Patch v3 01/23] ARM: Kirkwood: Give pm.c its own header file.   Andrew Lunn
• [Patch v3 02/23] irqchip: Orion: Fix getting generic chip pointer.   Andrew Lunn
• [Patch v3 03/23] ARM: Kirkwood: Convert mv88f6281gtw_ge switch setup to DT   Andrew Lunn
• [Patch v3 04/23] ARM: Kirkwood: Drop printing the SoC type and revision   Andrew Lunn
• [Patch v3 05/23] ARM: Kirkwood: Seperate board-dt from common and pcie code.   Andrew Lunn
• [Patch v3 06/23] ARM: Kirkwood: ioremap the cpu_config register before using it.   Andrew Lunn
• [Patch v3 07/23] ARM: Kirkwood: ioremap memory control register   Andrew Lunn
• [Patch v3 08/23] ARM: MVEBU: Add ARCH_MULTI_V7 to SoCs   Andrew Lunn
• [Patch v3 09/23] ARM: Orion: Move cache-feroceon-l2.h out of plat-orion   Andrew Lunn
• [Patch v3 10/23] ARM: MM: Add DT binding for Feroceon L2 cache   Andrew Lunn
• [Patch v3 11/23] ARM: Kirkwood: Instantiate L2 cache from DT.   Andrew Lunn
• [Patch v3 12/23] ARM: Fix default CPU selection for ARCH_MULTI_V5   Andrew Lunn
• [Patch v3 13/23] ARM: Fix MULTI_TLB for feroceon   Andrew Lunn
• [Patch v3 14/23] ARM: MM Enable building Feroceon L2 cache controller with ARCH_MVEBU   Andrew Lunn
• [Patch v3 15/23] ARM: Move kirkwood DT boards into mach-mvebu   Andrew Lunn
• [Patch v3 16/23] ARM: MVEBU: Let kirkwood use the system controller for restart   Andrew Lunn
• [Patch v3 17/23] ARM: MVEBU: Instantiate system controller in kirkwood.dtsi   Andrew Lunn
• [Patch v3 18/23] drivers: Enable building of Kirkwood drivers for mach-mvebu   Andrew Lunn
• [Patch v3 19/23] ARM: MVEBU: Enable mvebu-soc-id on Kirkwood   Andrew Lunn
• [Patch v3 20/23] ARM: config: Add a multi_v5_defconfig   Andrew Lunn
• [Patch v3 21/23] ARM: MVEBU: Simplifiy headers and make local   Andrew Lunn
• [Patch v3 22/23] ARM: config: Add mvebu_v5_defconfig   Andrew Lunn
• [Patch v3 23/23] ARM: Kirkwood: Remove DT support   Andrew Lunn
• [Patch v3 20/23] ARM: config: Add a multi_v5_defconfig   Andrew Lunn
• [Patch v3 20/23] ARM: config: Add a multi_v5_defconfig   Andrew Lunn
• [PATCH v7 4/4] ARM: Kirkwood: Add support for many Synology NAS devices   Andrew Lunn
• [PATCH v7 0/4] DT support for kirkwood based Synology NAS boxes   Andrew Lunn
• [PATCH v2 00/23] Move DT kirkwood into mach-mvebu   Andrew Lunn
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Andrew Lunn
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Andrew Lunn
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Andrew Lunn
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Andrew Lunn
• [RFC/PATCH] ARM: mvebu: Rename the ARCH_MVEBU menu option   Andrew Lunn
• [PATCH v2 00/23] Move DT kirkwood into mach-mvebu   Andrew Lunn
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Andrew Lunn
• Stuck getting DTS working for a new kirkwood board   Andrew Lunn
• Stuck getting DTS working for a new kirkwood board   Andrew Lunn
• [PATCH v4 00/22] Move DT kirkwood into mach-mvebu   Andrew Lunn
• [PATCH v4 01/22] ARM: Kirkwood: Give pm.c its own header file.   Andrew Lunn
• [PATCH v4 02/22] irqchip: Orion: Fix getting generic chip pointer.   Andrew Lunn
• [PATCH v4 03/22] ARM: Kirkwood: Convert mv88f6281gtw_ge switch setup to DT   Andrew Lunn
• [PATCH v4 04/22] ARM: Kirkwood: Drop printing the SoC type and revision   Andrew Lunn
• [PATCH v4 05/22] ARM: Kirkwood: Seperate board-dt from common and pcie code.   Andrew Lunn
• [PATCH v4 06/22] ARM: Kirkwood: ioremap the cpu_config register before using it.   Andrew Lunn
• [PATCH v4 07/22] ARM: Kirkwood: ioremap memory control register   Andrew Lunn
• [PATCH v4 08/22] ARM: MVEBU: Add ARCH_MULTI_V7 to SoCs   Andrew Lunn
• [PATCH v4 09/22] ARM: Orion: Move cache-feroceon-l2.h out of plat-orion   Andrew Lunn
• [PATCH v4 10/22] ARM: MM: Add DT binding for Feroceon L2 cache   Andrew Lunn
• [PATCH v4 11/22] ARM: Kirkwood: Instantiate L2 cache from DT.   Andrew Lunn
• [PATCH v4 12/22] ARM: Fix default CPU selection for ARCH_MULTI_V5   Andrew Lunn
• [PATCH v4 13/22] ARM: Fix MULTI_TLB for feroceon   Andrew Lunn
• [PATCH v4 14/22] ARM: MM Enable building Feroceon L2 cache controller with ARCH_MVEBU   Andrew Lunn
• [PATCH v4 15/22] ARM: Move kirkwood DT boards into mach-mvebu   Andrew Lunn
• [PATCH v4 16/22] ARM: MVEBU: Let kirkwood use the system controller for restart   Andrew Lunn
• [PATCH v4 17/22] ARM: MVEBU: Instantiate system controller in kirkwood.dtsi   Andrew Lunn
• [PATCH v4 18/22] drivers: Enable building of Kirkwood drivers for mach-mvebu   Andrew Lunn
• [PATCH v4 19/22] ARM: MVEBU: Enable mvebu-soc-id on Kirkwood   Andrew Lunn
• [PATCH v4 20/22] ARM: config: Add a multi_v5_defconfig   Andrew Lunn
• [PATCH v4 21/22] ARM: MVEBU: Simplifiy headers and make local   Andrew Lunn
• [PATCH v4 22/22] ARM: config: Add mvebu_v5_defconfig   Andrew Lunn
• Stuck getting DTS working for a new kirkwood board   Andrew Lunn
• [PATCH v4 03/22] ARM: Kirkwood: Convert mv88f6281gtw_ge switch setup to DT   Andrew Lunn
• [PATCH v4 00/22] Move DT kirkwood into mach-mvebu   Andrew Lunn
• [PATCH 0/4] mvebu support for kirkwood HP T5325   Andrew Lunn
• [PATCH 1/4] ARM: Kirkwood: Add audio node to kirkwood.dtsi   Andrew Lunn
• [PATCH 2/4] ARM: mvebu: Add i2c alias so setting bus number   Andrew Lunn
• [PATCH 3/4] ARM: mvebu: Add HP T5325 thin client   Andrew Lunn
• [PATCH 4/4] ARM: mvebu: Add HP T5325 devices to {multi|mvebu}_v5_defconfig   Andrew Lunn
• [PATCH] ARM: mvebu: Armada 375/38x depend on MULTI_V7   Andrew Lunn
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Andrew Lunn
• [PATCH v2 0/5] mvebu support for kirkwood HP T5325   Andrew Lunn
• [PATCH v2 1/5] ARM: Kirkwood: Add audio node to kirkwood.dtsi   Andrew Lunn
• [PATCH v2 2/5] ARM: mvebu: Add i2c alias so setting bus number   Andrew Lunn
• [PATCH v2 3/5] ARM: mvebu: Add HP T5325 thin client   Andrew Lunn
• [PATCH v2 4/5] ARM: mvebu: Add dts file describing HP T5325 thin client   Andrew Lunn
• [PATCH v2 5/5] ARM: mvebu: Add HP T5325 devices to {multi|mvebu}_v5_defconfig   Andrew Lunn
• [PATCH] ARM: Kirkwood: Remove redundant kexec code   Andrew Lunn
• [PATCH v2 2/5] ARM: mvebu: Add i2c alias so setting bus number   Andrew Lunn
• [PATCH v2 3/5] ARM: mvebu: Add HP T5325 thin client   Andrew Lunn
• [PATCH] net: phy: add suspend_halted module param   Andrew Lunn
• [PATCH] net: phy: add suspend_halted module param   Andrew Lunn
• [PATCH v3 0/5] mvebu support for kirkwood HP T5325   Andrew Lunn
• [PATCH v3 1/5] ARM: kirkwood: Add audio node to kirkwood.dtsi   Andrew Lunn
• [PATCH v3 2/5] ARM: kirkwood: Add i2c alias so setting bus number   Andrew Lunn
• [PATCH v3 3/5] ARM: kirkwood: Add HP T5325 thin client   Andrew Lunn
• [PATCH v3 4/5] ARM: kirkwood: Add dts file describing HP T5325 thin client   Andrew Lunn
• [PATCH v3 5/5] ARM: kirkwood: Add HP T5325 devices to {multi|mvebu}_v5_defconfig   Andrew Lunn
• [PATCH v3 5/5] ARM: kirkwood: Add HP T5325 devices to {multi|mvebu}_v5_defconfig   Andrew Lunn
• [PATCH 1/2] of: Add vendor prefixes used by Kirkwood devices   Andrew Lunn
• [PATCH 2/2] devicetree: bindings: add missing Marvell Kirkwood SoC documentation   Andrew Lunn
• [PATCH] net: phy: add suspend_halted module param   Andrew Lunn
• [PATCH] net: phy: add suspend_halted module param   Andrew Lunn
• [PATCH] net: phy: add suspend_halted module param   Andrew Lunn
• [PATCH 0/2] arm64: vdso fixes for coarse clocks   Nathan Lynch
• [PATCH 1/2] arm64: vdso: fix coarse clock handling   Nathan Lynch
• [PATCH 2/2] arm64: vdso: update wtm fields for CLOCK_MONOTONIC_COARSE   Nathan Lynch
• [PATCH 1/2] arm64: vdso: fix coarse clock handling   Nathan Lynch
• [PATCH v2 1/2] arm64: vdso: fix coarse clock handling   Nathan Lynch
• [RFC/PATCH v2] ARM: vDSO gettimeofday using generic timer architecture   Nathan Lynch
• [RFC/PATCH v2] ARM: vDSO gettimeofday using generic timer architecture   Nathan Lynch
• [RFC/PATCH v2] ARM: vDSO gettimeofday using generic timer architecture   Nathan Lynch
• [PATCH] arm64: vdso: clean up vdso_pagelist initialization   Nathan Lynch
• [PATCH] clk: respect the clock dependencies in of_clk_init   Emilio López
• [PATCH] clk: respect the clock dependencies in of_clk_init   Emilio López
• [PATCH] clk: respect the clock dependencies in of_clk_init   Emilio López
• [PATCH] clk: respect the clock dependencies in of_clk_init   Emilio López
• [PATCH 1/2] clk: fixed-rate: use full DT node name   Emilio López
• [PATCH 0/4] clk: mvebu: fix clk init order   Emilio López
• [PATCH 0/4] clk: mvebu: fix clk init order   Emilio López
• [PATCH v4 0/8] ARM: sunxi: rename DT clock node names to clk at N   Emilio López
• [PATCH v4 0/5] clk: sunxi usb clks support   Emilio López
• [PATCH v4 1/5] clk: sunxi: Add support for PLL6 on the A31   Emilio López
• [PATCH v4 0/8] Add Allwinner A20 GMAC ethernet support   Emilio López
• [PATCH v2 1/2] clk: sunxi: Add new clock compatibles   Emilio López
• [PATCH 0/4] clk: mvebu: fix clk init order   Emilio López
• [PATCH v3 2/2] i2c: New bus driver for the Qualcomm QUP I2C controller   Emilio López
• [PATCH 1/5] clk: sun6i: Protect CPU clock   Emilio López
• [PATCH 1/5] clk: sun6i: Protect CPU clock   Emilio López
• [PATCH v2 2/5] clk: sun6i: Reparent AHB clock on PLL6   Emilio López
• [PATCH] PM / Sleep: Set pm_generic functions to NULL for !CONFIG_PM_SLEEP   Pavel Machek
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Pavel Machek
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Pavel Machek
• [BISECTED] ssh - Received disconnect from x.x.x.x: 2: Bad packet length 3149594624   Pavel Machek
• [PATCH v3 3/3] ARM hibernation / suspend-to-disk   Pavel Machek
• [PATCH RESEND] dma: mmp_pdma: add support for residue reporting   Daniel Mack
• [PATCH v2 7/7] cpufreq: exynos: remove all exynos specific cpufreq driver support   Lukasz Majewski
• [PATCH v2 7/7] cpufreq: exynos: remove all exynos specific cpufreq driver support   Lukasz Majewski
• [PATCH v2 7/7] cpufreq: exynos: remove all exynos specific cpufreq driver support   Lukasz Majewski
• [PATCH v2 1/2] PM / OPP: Allow boost frequency to be looked up from device tree   Lukasz Majewski
• [PATCH v2 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency   Lukasz Majewski
• [PATCH v2 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency   Lukasz Majewski
• [PATCH v3 1/7] cpufreq: cpufreq-cpu0: allow use of optional boost mode frequencies   Lukasz Majewski
• [PATCH v3 2/7] clk: samsung: add infrastructure to register cpu clocks   Lukasz Majewski
• [PATCH 0/8] OMAP: OMAP3 DSS related clock patches   Belisko Marek
• [PATCH 1/2] mfd: twl4030-madc: Add devicetree support.   Belisko Marek
• [PATCH 1/2] mfd: twl4030-madc: Add devicetree support.   Belisko Marek
• [PATCH 5/9] ARM: dts: omap3-gta04: Add basic sound support.   Belisko Marek
• arm64: kernel panic in paging_init()   Catalin Marinas
• [PATCH] arm64: Add architecture support for PCI   Catalin Marinas
• [PATCH] arm64: Align CMA sizes to PAGE_SIZE   Catalin Marinas
• arm64: kernel panic in paging_init()   Catalin Marinas
• [PATCH] arm64: add DSB after icache flush in __flush_icache_all()   Catalin Marinas
• [PATCHv2] arm64: Align CMA sizes to PAGE_SIZE   Catalin Marinas
• [PATCH] security: select correct default LSM_MMAP_MIN_ADDR on arm on arm64   Catalin Marinas
• [PATCH v2 1/2] arm64: vdso: fix coarse clock handling   Catalin Marinas
• [PATCH] arm: add DSB after icache flush in __flush_icache_all()   Catalin Marinas
• [PATCH v2 resend 0/5] arm64: advertise availability of CRC and crypto instructions   Catalin Marinas
• [PATCHv2 0/2] Remove ARM meminfo   Catalin Marinas
• [PATCH] arm64: fix early_io_map for 64K pages   Catalin Marinas
• [PATCH] security: select correct default LSM_MMAP_MIN_ADDR on arm on arm64   Catalin Marinas
• [PATCH 03/18] arm64: boot protocol documentation update for GICv3   Catalin Marinas
• [PATCH] arm64: Change misleading function names in dma-mapping   Catalin Marinas
• [PATCH v3 05/11] ARM: LPAE: provide an IPA capable pmd_addr_end   Catalin Marinas
• [PATCH v3 06/11] ARM: KVM: force cache clean on page fault when caches are off   Catalin Marinas
• [PATCH v3 07/11] ARM: KVM: fix handling of trapped 64bit coprocessor accesses   Catalin Marinas
• [PATCH v3 08/11] ARM: KVM: fix ordering of 64bit coprocessor accesses   Catalin Marinas
• [PATCH v3 09/11] ARM: KVM: introduce per-vcpu HYP Configuration Register   Catalin Marinas
• [PATCH v3 10/11] ARM: KVM: add world-switch for AMAIR{0,1}   Catalin Marinas
• [PATCH v3 11/11] ARM: KVM: trap VM system registers until MMU and caches are ON   Catalin Marinas
• [PATCH] ARM: enable IRQs in user undefined instruction vector   Catalin Marinas
• [PATCH 1/6] arm64: barriers: allow dsb macro to take option parameter   Catalin Marinas
• [PATCH 2/6] arm64: barriers: make use of barrier options with explicit barriers   Catalin Marinas
• [PATCH 3/6] irqchip: gic: use writel instead of dsb + writel_relaxed   Catalin Marinas
• [PATCH 2/6] arm64: barriers: make use of barrier options with explicit barriers   Catalin Marinas
• [PATCH 4/6] iommu/arm-smmu: provide option to dsb macro when publishing tables   Catalin Marinas
• [PATCH 3/6] irqchip: gic: use writel instead of dsb + writel_relaxed   Catalin Marinas
• [PATCH 5/6] arm64: barriers: wire up new barrier options   Catalin Marinas
• [PATCH 6/6] arm64: barriers: use barrier() instead of smp_mb() when !SMP   Catalin Marinas
• [PATCH 3/6] irqchip: gic: use writel instead of dsb + writel_relaxed   Catalin Marinas
• [PATCH 3/6] irqchip: gic: use writel instead of dsb + writel_relaxed   Catalin Marinas
• [PATCH 3/6] irqchip: gic: use writel instead of dsb + writel_relaxed   Catalin Marinas
• [PATCH 2/2] ARM64: powernv: remove redundant cpuidle_idle_call()   Catalin Marinas
• [PATCH 3/6] irqchip: gic: use writel instead of dsb + writel_relaxed   Catalin Marinas
• [PATCH v3 05/11] ARM: LPAE: provide an IPA capable pmd_addr_end   Catalin Marinas
• [PATCH] ARM: enable IRQs in user undefined instruction vector   Catalin Marinas
• [GIT PULL] arm64 fixes for 3.14   Catalin Marinas
• [PATCHv2 2/2] arm: Get rid of meminfo   Catalin Marinas
• [PATCH] ARM: mm: report both sections from PMD   Catalin Marinas
• [PATCH] ARM: mm: report both sections from PMD   Catalin Marinas
• [PATCH] arm: add DSB after icache flush in __flush_icache_all()   Catalin Marinas
• [PATCH v2 2/5] irqchip: gic: use writel instead of dsb + writel_relaxed   Catalin Marinas
• [PATCH v2 1/5] arm64: barriers: make use of barrier options with explicit barriers   Catalin Marinas
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Catalin Marinas
• [PATCH RESEND] arm: add DSB after icache flush in __flush_icache_all()   Catalin Marinas
• [PATCH] ARM: mm: report both sections from PMD   Catalin Marinas
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Catalin Marinas
• [RFC PATCH V2 3/4] arm64: mm: Enable HAVE_RCU_TABLE_FREE logic   Catalin Marinas
• [RFC PATCH V2 4/4] arm64: mm: implement get_user_pages_fast   Catalin Marinas
• [PATCH 2/3] arm64: mm: Route pmd thp functions through pte equivalents   Catalin Marinas
• [PATCH 0/3] arm64: Use pte manipulation functions for THP   Catalin Marinas
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Catalin Marinas
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Catalin Marinas
• [PATCH] arm64: smp: Add a memory barrier before we start secondary cores   Catalin Marinas
• [PATCH 0/3] arm64: Use pte manipulation functions for THP   Catalin Marinas
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Catalin Marinas
• [PATCH] arm64: smp: Add a memory barrier before we start secondary cores   Catalin Marinas
• [PATCH v2] ARM: mm: report both sections from PMD   Catalin Marinas
• [PATCH v2] ARM: mm: report both sections from PMD   Catalin Marinas
• [PATCH v3] ARM: mm: report both sections from PMD   Catalin Marinas
• [PATCH 3/6] irqchip: gic: use writel instead of dsb + writel_relaxed   Catalin Marinas
• IPI_WAKEUP for arm64   Catalin Marinas
• [PATCH 16/22] arm64: Add function to create identity mappings   Catalin Marinas
• [PATCH] ARM64: unwind: Fix PC calculation   Catalin Marinas
• [PATCH] ARM64: unwind: Fix PC calculation   Catalin Marinas
• [PATCH] arm64: add workaround for ambiguous C99 stdint.h types   Catalin Marinas
• [PATCH] arm64: Add pdev_archdata for dmamask   Catalin Marinas
• [PATCH v9 1/6] arm64: Add macros to manage processor debug state   Catalin Marinas
• [PATCH] arm64: add workaround for ambiguous C99 stdint.h types   Catalin Marinas
• [PATCH v9 4/5] arm64: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_ops   Catalin Marinas
• [PATCH] arm64: add workaround for ambiguous C99 stdint.h types   Catalin Marinas
• Recent 3.x kernels: Memory leak causing OOMs   Catalin Marinas
• [PATCH] asm-generic: add sched_setattr/sched_getattr syscalls   Catalin Marinas
• [PATCH v9 1/6] arm64: Add macros to manage processor debug state   Catalin Marinas
• [PATCH 1/2] arm64: Add seccomp support   Catalin Marinas
• [PATCH v4 04/12] ARM: KVM: introduce kvm_p*d_addr_end   Catalin Marinas
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Catalin Marinas
• [PATCH v4 00/12] arm/arm64: KVM: host cache maintenance when guest caches are off   Catalin Marinas
• [PATCH v9 1/6] arm64: Add macros to manage processor debug state   Catalin Marinas
• [PATCH v3 2/5] irqchip: gic: use dmb ishst instead of dsb when raising a softirq   Catalin Marinas
• [PATCH v9 1/6] arm64: Add macros to manage processor debug state   Catalin Marinas
• [PATCH 1/2] arm64: Add seccomp support   Catalin Marinas
• [PATCH 1/2] arm64: atomics: fix use of acquire + release for full barrier semantics   Catalin Marinas
• [PATCH 2/2] arm64: asm: remove redundant "cc" clobbers   Catalin Marinas
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Catalin Marinas
• [PATCH v9 1/6] arm64: Add macros to manage processor debug state   Catalin Marinas
• [PATCH v9 1/6] arm64: Add macros to manage processor debug state   Catalin Marinas
• [PATCH 2/3] arm64: mm: Route pmd thp functions through pte equivalents   Catalin Marinas
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   Catalin Marinas
• memcpy alignment for DEVICE_nGnRnE   Catalin Marinas
• [RFC PATCH 2/2] arm: mm: Double logical invert for LPAE pte_write(), pte_dirty()   Catalin Marinas
• [PATCH 1/1] arm64: enable processor debug state for secondary cpus   Catalin Marinas
• [PATCH v2 1/4] arm64: add abstractions for FPSIMD state manipulation   Catalin Marinas
• [PATCH v2 2/4] arm64: defer reloading a task's FPSIMD state to userland resume   Catalin Marinas
• [PATCH v5 2/5] ACPI / processor_core: Rework _PDC related stuff to make it more arch-independent   Catalin Marinas
• [PATCH v5 2/5] ACPI / processor_core: Rework _PDC related stuff to make it more arch-independent   Catalin Marinas
• [PATCH v2 2/4] arm64: defer reloading a task's FPSIMD state to userland resume   Catalin Marinas
• [PATCH v4 0/6] generic early_ioremap support   Catalin Marinas
• [Linaro-mm-sig] CMA on AArch64   Catalin Marinas
• arm64 cache maintenance on read only address loops forever   Catalin Marinas
• [RFC PATCH 1/1] arm64: Add support for 48-bit Physical Address   Catalin Marinas
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Catalin Marinas
• [RFC] ARM VM System Sepcification   Catalin Marinas
• [PATCH v2 2/3] arm64: Extend the PCI I/O space to 16MB   Catalin Marinas
• [PATCH V2 1/3] arm: mm: Double logical invert for pte accessors   Catalin Marinas
• [PATCH V2 2/3] arm64: mm: Add double logical invert to pte accessors   Catalin Marinas
• [RFC/RFT 1/2] ARM: mm: introduce arch hooks for dma address translation routines   Dave Martin
• [RFC/RFT 1/2] ARM: mm: introduce arch hooks for dma address translation routines   Dave Martin
• [RFC/RFT 1/2] ARM: mm: introduce arch hooks for dma address translation routines   Dave Martin
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Dave Martin
• [PATCH] ARM: mm: add imprecise abort non-deadly handler   Dave Martin
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Dave Martin
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Dave Martin
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Dave Martin
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Dave Martin
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Dave Martin
• [RFC PATCH] ARM: Add imprecise abort enable/disable macro   Dave Martin
• [PATCH] ARM: mm: add imprecise abort non-deadly handler   Dave Martin
• [PATCH v2] ARM: asm: rename logical shift macros push pull into lspush lspull   Dave Martin
• [PATCH v2] ARM: asm: rename logical shift macros push pull into lspush lspull   Dave Martin
• [PATCH v2] ARM: asm: rename logical shift macros push pull into lspush lspull   Dave Martin
• [PATCH RESEND] ARM: mcpm: Make all mcpm functions notrace   Dave Martin
• [PATCH 2/2] ARM: mm: keep rodata non-executable   Dave Martin
• [PATCH 2/2] ARM: mm: keep rodata non-executable   Dave Martin
• [PATCH 2/2] ARM: mm: keep rodata non-executable   Dave Martin
• Toggling gpio pins while powering down   Jasbir Matharu
• Toggling gpio pins while powering down   Jasbir Matharu
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Peter Maydell
• [RFC] ARM VM System Sepcification   Peter Maydell
• [RFC] ARM VM System Sepcification   Peter Maydell
• [RFC] ARM VM System Sepcification   Peter Maydell
• [RFC] ARM VM System Sepcification   Peter Maydell
• [PATCH v2] ARM: dts: remove bcm11351-brt.dts   Markus Mayer
• [PATCH] ARM: bcm2835: Move to mach-bcm directory   Markus Mayer
• [PATCH] ARM: bcm2835: Move to mach-bcm directory   Markus Mayer
• [PATCH 0/4] ARM: bcm281xx: Consolidate code   Markus Mayer
• [PATCH 1/4] ARM: bcm281xx: Move kona_l2_cache_init() so it can be shared   Markus Mayer
• [PATCH 2/4] ARM: bcm281xx: Consolidate reboot code   Markus Mayer
• [PATCH 3/4] ARM: bcm281xx: Re-order hearder files   Markus Mayer
• [PATCH 4/4] ARM: bcm281xx: Rename board_init() function   Markus Mayer
• [PATCH] mach-bcm: bcm281xx: symbol cleanup   Markus Mayer
• [PATCH 0/3] ARM: bcm21664: Add initial support.   Markus Mayer
• [PATCH 1/3] ARM: DT: bcm21664: Device tree bindings   Markus Mayer
• [PATCH 2/3] ARM: bcm21664: Add board support.   Markus Mayer
• [PATCH 3/3] ARM: dts: bcm21664: Add device tree files.   Markus Mayer
• [PATCH] gpio: only enable kona driver on BCM_MOBILE or for compile testing   Markus Mayer
• [PATCH] gpio: only enable kona driver on BCM_MOBILE or for compile testing   Markus Mayer
• [PATCH] arm/Kconfig.debug: CONFIG_DEBUG_SET_MODULE_RONX and insn patching are mutually exclusive   Kyle McMartin
• [PATCH v8 0/4] ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU   Hauke Mehrtens
• [PATCH v8 1/4] ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU   Hauke Mehrtens
• [PATCH v8 2/4] ARM: BCM5301X: add early debugging support   Hauke Mehrtens
• [PATCH v8 3/4] ARM: BCM5301X: add dts files for BCM4708 SoC   Hauke Mehrtens
• [PATCH v8 4/4] ARM: BCM5301X: workaround suppress fault   Hauke Mehrtens
• [PATCH] perf: ARM64: wire up perf_regs and unwind support   Arnaldo Carvalho de Melo
• [PATCH 1/2] PM / OPP: Add support for 'boost' mode OPP   Nishanth Menon
• [PATCH] ARM: dts: omap3-ldp: fix mmc configuration   Nishanth Menon
• [PATCH] mmc: omap_hsmmc: Add support for Erratum 2.1.1.128 in device tree boot   Nishanth Menon
• [PATCH 1/2] PM / OPP: Add support for 'boost' mode OPP   Nishanth Menon
• Extending OPP bindings   Nishanth Menon
• Extending OPP bindings   Nishanth Menon
• Extending OPP bindings   Nishanth Menon
• [PATCH] ARM: OMAP3+: DPLL: stop reparenting to same parent if already done   Nishanth Menon
• [PATCH v2 7/7] cpufreq: exynos: remove all exynos specific cpufreq driver support   Nishanth Menon
• [PATCH RESEND] ARM: dts: add BeagleBone Audio Cape (Rev A) dtsi   Nishanth Menon
• [PATCH] mmc: omap_hsmmc: Add support for Erratum 2.1.1.128 in device tree boot   Nishanth Menon
• [PATCH RESEND] ARM: dts: add BeagleBone Audio Cape (Rev A) dtsi   Nishanth Menon
• [PATCH] ARM: OMAP4: hwmod: Fix SOFTRESET logic for OMAP4   Nishanth Menon
• [PATCH 3/3] ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi   Nishanth Menon
• [PATCH 2/3] ARM: OMAP2+: AM43x: Add ID for ES1.1   Nishanth Menon
• [PATCH 3/3] ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi   Nishanth Menon
• [PATCH] ARM: multi_v7_defconfig: Select CONFIG_SOC_DRA7XX   Nishanth Menon
• [PATCHv5] omap3: Add basic support for 720MHz part   Nishanth Menon
• [PATCH v2 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency   Nishanth Menon
• [PATCH v2 1/2] PM / OPP: Allow boost frequency to be looked up from device tree   Nishanth Menon
• [PATCH v2 1/2] PM / OPP: Allow boost frequency to be looked up from device tree   Nishanth Menon
• [PATCH v3 1/7] cpufreq: cpufreq-cpu0: allow use of optional boost mode frequencies   Nishanth Menon
• [PATCH v2 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency   Nishanth Menon
• [PATCH v2 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency   Nishanth Menon
• [PATCH v2 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency   Nishanth Menon
• [PATCH v2 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency   Nishanth Menon
• [PATCH v3 1/7] cpufreq: cpufreq-cpu0: allow use of optional boost mode frequencies   Nishanth Menon
• [PATCHv5] omap3: Add basic support for 720MHz part   Nishanth Menon
• OMAP baseline test results for v3.14-rc1   Nishanth Menon
• [PATCH] ARM: dts: OMAP2+: Fix boot with multi_v7_defconfig   Nishanth Menon
• [PATCH] ARM: dts: OMAP2+: Fix boot with multi_v7_defconfig   Nishanth Menon
• [PATCH] ARM: dts: OMAP2+: Fix boot with multi_v7_defconfig   Nishanth Menon
• [PATCH] ARM: dts: omap3-n9 family: mark proper OMAP version   Nishanth Menon
• [PATCH] ARM: dts: omap3-n9 family: mark proper OMAP version   Nishanth Menon
• [PATCH 1/2] ARM: dts: N9/N950: fix boot hang with 3.14-rc1   Nishanth Menon
• [PATCH 2/2] ARM: dts: N900: add missing compatible property   Nishanth Menon
• [PATCH v2 1/4] ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo   Nishanth Menon
• [PATCH v2 2/4] ARM: dts: omap3-tobi: Use the correct vendor prefix   Nishanth Menon
• [PATCH v2 3/4] ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi   Nishanth Menon
• [PATCH v2 4/4] Documentation: dt: OMAP: Update Overo/Tobi   Nishanth Menon
• [PATCH V2 0/2] mmc: omap_hsmmc: fix for pre es3.0 OMAP3   Nishanth Menon
• [PATCH V2 1/2] mmc: omap_hsmmc: Add support for quirky omap3 hsmmc controller   Nishanth Menon
• [PATCH V2 2/2] ARM: dts: omap3-ldp: fix mmc configuration   Nishanth Menon
• [PATCH] mmc: omap_hsmmc: Add support for Erratum 2.1.1.128 in device tree boot   Nishanth Menon
• [PATCH v2 4/4] Documentation: dt: OMAP: Update Overo/Tobi   Nishanth Menon
• [RFC PATCH 0/6] PM: introduce voltage domain abstraction   Nishanth Menon
• [RFC PATCH 1/6] PM / Voltagedomain: Add generic clk notifier handler for regulator based dynamic voltage scaling   Nishanth Menon
• [RFC PATCH 2/6] cpufreq: cpufreq-cpu0: use clk rate-change notifiers   Nishanth Menon
• [RFC PATCH 3/6] PM / Voltagedomain: introduce voltage domain driver support   Nishanth Menon
• [RFC PATCH 4/6] devicetree: bindings: add documentation for voltagedomain   Nishanth Menon
• [RFC PATCH 5/6] PM / Voltagedomain: introduce basic voltage domain support for OMAP   Nishanth Menon
• [RFC PATCH 6/6] devicetree: bindings: voltagedomain: add bindings for OMAP compatible SoCs   Nishanth Menon
• [GIT PULL] ARM: OMAP2+: clock/PRCM/hwmod fixes for v3.14-rc   Nishanth Menon
• [GIT PULL] ARM: OMAP2+: clock/PRCM/hwmod fixes for v3.14-rc   Nishanth Menon
• [PATCH 3/4] ARM: dts: OMAP5: Add device nodes for ABB   Nishanth Menon
• [RFC PATCH 3/6] PM / Voltagedomain: introduce voltage domain driver support   Nishanth Menon
• [RFC PATCH 1/6] PM / Voltagedomain: Add generic clk notifier handler for regulator based dynamic voltage scaling   Nishanth Menon
• [RFC PATCH 1/6] PM / Voltagedomain: Add generic clk notifier handler for regulator based dynamic voltage scaling   Nishanth Menon
• [RFC PATCH 1/6] PM / Voltagedomain: Add generic clk notifier handler for regulator based dynamic voltage scaling   Nishanth Menon
• [PATCH v2 3/8] ARM: dts: omap3-overo: Use complete poweroff   Nishanth Menon
• [PATCH v2 3/8] ARM: dts: omap3-overo: Use complete poweroff   Nishanth Menon
• [PATCH V2 1/2] mmc: omap_hsmmc: Add support for quirky omap3 hsmmc controller   Nishanth Menon
• [PATCH 00/12] ARM: OMAP2 DT clock conversion   Nishanth Menon
• [PATCH 05/12] CLK: TI: APLL: add support for omap2 aplls   Nishanth Menon
• [PATCH 11/12] ARM: OMAP2: PRM: add support for OMAP2 specific clock providers   Nishanth Menon
• [PATCH 1/3] net: ethernet: sunxi: Add new compatibles   David Miller
• [PATCH 2/3] net: phy: sunxi: Add new compatibles   David Miller
• [PATCH 3/3] ARM: sunxi: dt: Convert to the new net compatibles   David Miller
• [PATCH v1 1/3] net: stmmac:sti: Add STi SOC glue driver.   David Miller
• [PATCH v2 1/3] net: stmmac:sti: Add STi SOC glue driver.   David Miller
• [PATCH 0/14] Xilinx axi ethernet patches   David Miller
• [PATCH v3 0/3] net: stmmac: Add STi GMAC ethernet   David Miller
• [PATCH v2 1/2] net: axienet: Fix compilation error   David Miller
• [PATCH v2 2/2] net: axienet: Fix compilation warnings   David Miller
• [PATCH] drivers: net: cpsw: fix buggy loop condition   David Miller
• [PATCH] NET: fec: only enable napi if we are successful   David Miller
• [PATCH v2] net: ethernet: update dependency and help text of mvneta   David Miller
• [PATCH] net: phy: add suspend_halted module param   David Miller
• [PATCH RESEND] ARM: dts: add BeagleBone Audio Cape (Rev A) dtsi   Jack Mitchell
• [RFC PATCH 1/1] arm64: Add support for 48-bit Physical Address   Radha Mohan
• [PATCH v3 3/5] ASoC: tda998x: add DT documentation of the tda998x CODEC   Jean-Francois Moine
• [PATCH v3 0/5] add a TDA998x CODEC   Jean-Francois Moine
• [PATCH v5 02/23] drm/i2c: tda998x: check more I/O errors   Jean-Francois Moine
• [PATCH v5 09/23] drm/i2c: tda998x: don't read write-only registers   Jean-Francois Moine
• [PATCH v5 00/23]   Jean-Francois Moine
• [PATCH v5 00/23]   Jean-Francois Moine
• [PATCH v5 00/23]   Jean-Francois Moine
• [PATCH v5 00/23]   Jean-Francois Moine
• [PATCH v3 2/5] ASoC: tda998x: add a codec driver for the TDA998x   Jean-Francois Moine
• [PATCH v3 2/5] ASoC: tda998x: add a codec driver for the TDA998x   Jean-Francois Moine
• [PATCH v3 3/5] ASoC: tda998x: add DT documentation of the tda998x CODEC   Jean-Francois Moine
• [PATCH v3 4/5] ASoC: tda998x: adjust the audio hw parameters from EDID   Jean-Francois Moine
• [alsa-devel] [PATCH v3 4/5] ASoC: tda998x: adjust the audio hw parameters from EDID   Jean-Francois Moine
• [PATCH RFC 26/46] drivers/base: provide an infrastructure for componentised subsystems   Jean-Francois Moine
• [PATCH v3 1/2] drivers/base: permit base components to omit the bind/unbind ops   Jean-Francois Moine
• [PATCH RFC 1/2] drivers/base: permit base components to omit the bind/unbind ops   Jean-Francois Moine
• [PATCH v3 2/2] drivers/base: declare phandle DT nodes as components   Jean-Francois Moine
• [PATCH RFC 2/2] drivers/base: declare phandle DT nodes as components   Jean-Francois Moine
• [PATCH v3 0/2] *** SUBJECT HERE ***   Jean-Francois Moine
• [PATCH RFC 0/2] drivers/base: simplify simple DT-based components   Jean-Francois Moine
• [PATCH RFC 0/2] drivers/base: simplify simple DT-based components   Jean-Francois Moine
• [PATCH RESEND v3] clk: return probe defer when DT clock not yet ready   Jean-Francois Moine
• irqchip: irq-dove: problem with the PMU interrupt controller.   Jean-Francois Moine
• [PATCH RFC 0/2] drivers/base: simplify simple DT-based components   Jean-Francois Moine
• [PATCH v3 1/2] drivers/base: permit base components to omit the bind/unbind ops   Jean-Francois Moine
• [PATCH RFC v2 00/35] Second preview of imx-drm cleanup series   Jean-Francois Moine
• [PATCH] drm/i2c: tda998x: fix memory leak in case of i2c error   Jean-Francois Moine
• irqchip: irq-dove: problem with the PMU interrupt controller.   Jean-Francois Moine
• [PATCH RESEND v3] clk: return probe defer when DT clock not yet ready   Jean-Francois Moine
• [PATCH 0/3] Versatile Express sysregs rework   Pawel Moll
• [PATCH 1/3] driver core & of: Mark of_nodes of added device as populated   Pawel Moll
• [PATCH 2/3] mfd: vexpress: Convert custom func API to regmap   Pawel Moll
• [PATCH 3/3] mfd: vexpress: Define the device as MFD cells   Pawel Moll
• [PATCH 00/12] Versatile Express updates   Pawel Moll
• [PATCH 01/12] misc: vexpress-syscfg: Add udelay-based delay   Pawel Moll
• [PATCH 02/12] power/reset: vexpress: Use udelay instead of timers   Pawel Moll
• [PATCH 03/12] clk: versatile: Split config options for sp810 and vexpress_osc   Pawel Moll
• [PATCH 04/12] clocksource: Sched clock source for Versatile Express   Pawel Moll
• [PATCH 05/12] GPIO: gpio-generic: Add label to platform data   Pawel Moll
• [PATCH 06/12] mfd: vexpress-sysreg: Add labels to gpio banks   Pawel Moll
• [PATCH 07/12] mfd: syscon: Consider platform data a regmap config name   Pawel Moll
• [PATCH 08/12] mfd: vexpress-sysreg: Add syscon labels as platform data   Pawel Moll
• [PATCH 09/12] hwmon: vexpress: Use devm helper for hwmon device registration   Pawel Moll
• [PATCH 10/12] ARM: vexpress: remove redundant vexpress_dt_cpus_num to get cpu count   Pawel Moll
• [PATCH 11/12] ARM: vexpress: Simplify SMP operations for DT-powered system   Pawel Moll
• [PATCH 12/12] ARM: vexpress: move HBI check to sysreg driver   Pawel Moll
• [PATCH 05/12] GPIO: gpio-generic: Add label to platform data   Pawel Moll
• [PATCH 05/12] GPIO: gpio-generic: Add label to platform data   Pawel Moll
• [PATCH 08/12] mfd: vexpress-sysreg: Add syscon labels as platform data   Pawel Moll
• [PATCH v2 1/2] mfd: syscon: Add platform data with a regmap config name   Pawel Moll
• [PATCH v2 2/2] mfd: vexpress-sysreg: Add syscon labels as platform data   Pawel Moll
• [PATCH v2 1/2] mfd: syscon: Add platform data with a regmap config name   Pawel Moll
• [PATCH 07/12] mfd: syscon: Consider platform data a regmap config name   Pawel Moll
• [PATCH 07/12] mfd: syscon: Consider platform data a regmap config name   Pawel Moll
• [PATCH 09/12] hwmon: vexpress: Use devm helper for hwmon device registration   Pawel Moll
• [PATCH 02/12] power/reset: vexpress: Use udelay instead of timers   Pawel Moll
• [PATCH 09/12] hwmon: vexpress: Use devm helper for hwmon device registration   Pawel Moll
• [PATCH 00/12] Versatile Express updates   Pawel Moll
• [PATCH 06/12] mfd: vexpress-sysreg: Add labels to gpio banks   Pawel Moll
• [GIT PULL] tree-wide: clean up no longer required #include <linux/init.h>   Ingo Molnar
• [GIT PULL] tree-wide: clean up no longer required #include <linux/init.h>   Ingo Molnar
• [PATCH] perf: ARM64: wire up perf_regs and unwind support   Ingo Molnar
• [PATCH 1/3] clk: rcar-h2: fix sd0/sd1 divisor table   Kuninori Morimoto
• [PATCH 1/3] clk: rcar-h2: fix sd0/sd1 divisor table   Kuninori Morimoto
• [PATCH] security: select correct default LSM_MMAP_MIN_ADDR on arm on arm64   James Morris
• [PATCH] arm64: Add architecture support for PCI   Andrew Murray
• [PATCH] arm64: Add architecture support for PCI   Andrew Murray
• [PATCH v2 1/4] pci: OF: Fix the conversion of IO ranges into IO resources.   Andrew Murray
• [PATCH v2 3/3] arm64: Add architecture support for PCI   Andrew Murray
• [Update][PATCH 2/2] clocksource: Make clocksource register functions void   Preeti Murthy
• a LLC sched domain bug for panda board?   Preeti U Murthy
• [PATCH 1/2] PPC: powernv: remove redundant cpuidle_idle_call()   Preeti U Murthy
• [PATCH 2/2] ARM64: powernv: remove redundant cpuidle_idle_call()   Preeti U Murthy
• [PATCH 1/2] PPC: powernv: remove redundant cpuidle_idle_call()   Preeti U Murthy
• [PATCH 1/2] PPC: powernv: remove redundant cpuidle_idle_call()   Preeti U Murthy
• [PATCH 1/2] PPC: powernv: remove redundant cpuidle_idle_call()   Preeti U Murthy
• [PATCH 1/2] PPC: powernv: remove redundant cpuidle_idle_call()   Preeti U Murthy
• [PATCH 1/2] PPC: powernv: remove redundant cpuidle_idle_call()   Preeti U Murthy
• [PATCH] ARM: imx6q: support ptp and rmii clock from pad   Philippe De Muyter
• emmc on imx6 sabresd   Philippe De Muyter
• imx6qdl, weim ranges and gpr1   Philippe De Muyter
• [PATCH] ARM: imx6q: support ptp and rmii clock from pad   Philippe De Muyter
• [PATCH] bus: imx-weim: support weim-cs-gpr for imx6q-weim   Philippe De Muyter
• [PATCH v2] bus: imx-weim: support CS GPR config for imx6q-weim   Philippe De Muyter
• [PATCH v4] bus: imx-weim: support CS GPR configuration   Philippe De Muyter
• [PATCH v4] bus: imx-weim: support CS GPR configuration   Philippe De Muyter
• [PATCH v4] bus: imx-weim: support CS GPR configuration   Philippe De Muyter
• [PATCH v5] bus: imx-weim: support CS GPR configuration   Philippe De Muyter
• NFS client broken in Linus' tip   Trond Myklebust
• NFS client broken in Linus' tip   Trond Myklebust
• NFS client broken in Linus' tip   Trond Myklebust
• NFS client broken in Linus' tip   Trond Myklebust
• NFS client broken in Linus' tip   Trond Myklebust
• NFS client broken in Linus' tip   Trond Myklebust
• [PATCH] drivers: net: cpsw: fix buggy loop condition   Mugunthan V N
• [PATCH 1/1] ARM: OMAP: Kill warning in CPUIDLE code with !CONFIG_SMP   Mugunthan V N
• [PATCH RFC 0/2] watchdog boot status   Mandar Nandale
• [PATCH] clk: samsung: Initialize clock table with error pointers   Sylwester Nawrocki
• [PATCH v2 1/9] clk: exynos4: Remove remnants of non-DT support   Sylwester Nawrocki
• [PATCH v2 2/9] clk: samsung: Provide common helpers for register save/restore   Sylwester Nawrocki
• [PATCH v2 0/9] Samsung PM consolidation part 1 (clocks)   Sylwester Nawrocki
• [PATCH] clk: Correct handling of NULL clk in __clk_{get, put}   Sylwester Nawrocki
• [PATCH RESEND v3] clk: return probe defer when DT clock not yet ready   Sylwester Nawrocki
• [PATCH RFC v1 0/3] clk: Support for DT assigned clk parent and rate   Sylwester Nawrocki
• [PATCH RFC v1 1/3] clk: Add function to parse an arbitrary clocks list property   Sylwester Nawrocki
• [PATCH RFC v1 2/3] of: Add definition of maximum length of a property name   Sylwester Nawrocki
• [PATCH RFC v1 3/3] clk: Add handling of clk parent and rate assigned from DT   Sylwester Nawrocki
• I2C dummy adapter driver ?   Sylwester Nawrocki
• [PATCH RFC v1 2/3] of: Add definition of maximum length of a property name   Sylwester Nawrocki
• [PATCH v4 00/10] Add device tree support for Exynos4 SoC camera subsystem   Sylwester Nawrocki
• [PATCH v4 00/10] Add device tree support for Exynos4 SoC camera subsystem   Sylwester Nawrocki
• [PATCH v4 01/10] Documentation: dt: Add DT binding documentation for S5K6A3 image sensor   Sylwester Nawrocki
• [PATCH v4 02/10] Documentation: dt: Add DT binding documentation for S5C73M3 camera   Sylwester Nawrocki
• [PATCH v4 03/10] Documentation: devicetree: Update Samsung FIMC DT binding   Sylwester Nawrocki
• [PATCH v4 04/10] V4L: Add driver for s5k6a3 image sensor   Sylwester Nawrocki
• [PATCH v4 05/10] V4L: s5c73m3: Add device tree support   Sylwester Nawrocki
• [PATCH v4 06/10] exynos4-is: Use external s5k6a3 sensor driver   Sylwester Nawrocki
• [PATCH v4 07/10] exynos4-is: Add clock provider for the SCLK_CAM clock outputs   Sylwester Nawrocki
• [PATCH v4 08/10] exynos4-is: Add support for asynchronous subdevices registration   Sylwester Nawrocki
• [PATCH v4 09/10] ARM: dts: Add rear camera nodes for Exynos4412 TRATS2 board   Sylwester Nawrocki
• [PATCH v4 10/10] ARM: dts: exynos4: Update clk provider part of the camera subsystem   Sylwester Nawrocki
• [PATCH RFC v1 3/3] clk: Add handling of clk parent and rate assigned from DT   Sylwester Nawrocki
• I2C dummy adapter driver ?   Sylwester Nawrocki
• I2C dummy adapter driver ?   Sylwester Nawrocki
• [PATCH v2 1/2] phy: Select PHY_EXYNOS_MIPI_VIDEO by default for ARCH_EXYNOS   Sylwester Nawrocki
• [PATCH v2 2/2] phy: Select PHY_EXYNOS_DP_VIDEO by default for ARCH_EXYNOS   Sylwester Nawrocki
• [PATCH] phy: restrict Samsung S5P/Exynos drivers to the respective architectures   Sylwester Nawrocki
• [PATCH v2 2/2] phy: Select PHY_EXYNOS_DP_VIDEO by default for ARCH_EXYNOS   Sylwester Nawrocki
• [PATCH v3 1/2] phy: Select PHY_EXYNOS_MIPI_VIDEO by default for ARCH_EXYNOS   Sylwester Nawrocki
• [PATCH v3 2/2] phy: Select PHY_EXYNOS_DP_VIDEO by default for ARCH_EXYNOS   Sylwester Nawrocki
• [PATCH v2 2/2] phy: Select PHY_EXYNOS_DP_VIDEO by default for ARCH_EXYNOS   Sylwester Nawrocki
• [PATCH v4 02/10] Documentation: dt: Add DT binding documentation for S5C73M3 camera   Sylwester Nawrocki
• [PATCH v4 03/10] Documentation: devicetree: Update Samsung FIMC DT binding   Sylwester Nawrocki
• [PATCH v4 07/10] exynos4-is: Add clock provider for the SCLK_CAM clock outputs   Sylwester Nawrocki
• [PATCH v4 03/10] Documentation: devicetree: Update Samsung FIMC DT binding   Sylwester Nawrocki
• [PATCH RFC v1 1/3] clk: Add function to parse an arbitrary clocks list property   Sylwester Nawrocki
• [PATCH v5 00/10] Add device tree support for Exynos4 camera interface   Sylwester Nawrocki
• [PATCH v5 01/10] Documentation: dt: Add binding documentation for S5K6A3 image sensor   Sylwester Nawrocki
• [PATCH v5 02/10] Documentation: dt: Add binding documentation for S5C73M3 camera   Sylwester Nawrocki
• [PATCH v5 03/10] Documentation: devicetree: Update Samsung FIMC DT binding   Sylwester Nawrocki
• [PATCH v5 04/10] V4L: Add driver for s5k6a3 image sensor   Sylwester Nawrocki
• [PATCH v5 05/10] V4L: s5c73m3: Add device tree support   Sylwester Nawrocki
• [PATCH v5 06/10] exynos4-is: Use external s5k6a3 sensor driver   Sylwester Nawrocki
• [PATCH v5 07/10] exynos4-is: Add clock provider for the SCLK_CAM clock outputs   Sylwester Nawrocki
• [PATCH v5 08/10] exynos4-is: Add support for asynchronous subdevices registration   Sylwester Nawrocki
• [PATCH v5 09/10] ARM: dts: Add rear camera nodes for Exynos4412 TRATS2 board   Sylwester Nawrocki
• [PATCH v5 10/10] ARM: dts: exynos4: Update camera clk provider and s5k6a3 sensor node   Sylwester Nawrocki
• [PATCH RFC v1 3/3] clk: Add handling of clk parent and rate assigned from DT   Sylwester Nawrocki
• [PATCH v5 04/10] V4L: Add driver for s5k6a3 image sensor   Sylwester Nawrocki
• [PATCH v5 04/10] V4L: Add driver for s5k6a3 image sensor   Sylwester Nawrocki
• [PATCH V2 4/4] ARM: OMAP2+: AM43x: Use gptimer as clocksource   Rajendra Nayak
• [PATCH 1/1] ARM: OMAP5: Fix reboot handling   Rajendra Nayak
• [BUG] Circular locking dependency - DRM/CMA/MM/hotplug/...   Michal Nazarewicz
• [PATCHv9 1/4] clk: socfpga: Add a clk-phase property to the "altr, socfpga-gate-clk"   Dinh Nguyen
• [GIT PULL] SOCFPGA DT updates for 3.15   Dinh Nguyen
• [GIT PULL] SOCFPGA DT updates for 3.15   Dinh Nguyen
• [PATCH 1/3] clk: socfpga: Fix integer overflow in clock calculation   Dinh Nguyen
• Locking issues SAMA5   Tim Niemeyer
• [PATCH v5] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif   Sekhar Nori
• [PATCH v4] gpio: davinci: reuse for keystone soc   Sekhar Nori
• [GIT PULL] DaVinci NAND update for v3.15   Sekhar Nori
• [PATCH 0/5] ARM: davinci: tnetv107x removal   Sekhar Nori
• [PATCH v5] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif   Brian Norris
• [PATCH] MTD: atmel_nand: POI fall back is not an issue: change log level   Brian Norris
• [patch] mtd: nuc900_nand: NULL dereference in nuc900_nand_enable()   Brian Norris
• [PATCH v4 00/12] arm/arm64: KVM: host cache maintenance when guest caches are off   Eric Northup
• [LTP] How to get the Linux kernel coverage data on ARM arch when I run LTP test?   Peter Oberparleiter
• [PATCH] perf: ARM64: wire up perf_regs and unwind support   Jiri Olsa
• [PATCH v2] ARM: at91: add Atmel's SAMA5D3 Xplained board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 1/2] at91: gpio: use gpiolib API to mark a GPIO used as an IRQ   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 01/15] at91: dt: Add at91sam9261 dt SoC support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 04/15] ARM: at91: prepare common clk transition for sam9261 SoC   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 06/15] at91: dt: at91sam9261ek: Adds DT entries for the 4 user buttons   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 03/15] at91: dt: sam9261: Basic Device Tree support for the at91sam9261ek   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 00/15] Device Tree support for the at91sam9261ek   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] USB: at91: fix the number of endpoint parameter   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] pinctrl:at91:add drive strength configuration   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 07/12] at91: dt: smc: Added smc bus driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] ARM: at91: add Atmel's SAMA5D3 Xplained board   Jean-Christophe PLAGNIOL-VILLARD
• [GIT PULL] at91: fixes for 3.14 #1   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] OF: update stdout-path parsing   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] serial: atmel: evaluate linux,stdout-path property   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arm: dtsi: am335x-bone-common, usb0 is peripheral only   Markus Pargmann
• [PATCH 4/6] net: cpsw: Use cpsw-ctrl-macid driver   Markus Pargmann
• [PATCH 3/6] net: cpsw: Add control-module macid driver   Markus Pargmann
• [PATCH] arm: dtsi: am335x-bone-common, usb0 is peripheral only   Markus Pargmann
• [PATCH] regulator: core bugfix: Use normal enable for always_on regulators   Markus Pargmann
• [PATCH] dma: sdma: Add imx25 compatible   Markus Pargmann
• [PATCH v2] ARM: dts: tps65910 backup battery regulator   Markus Pargmann
• [PATCH v4 0/2] usb: musb dsps updates   Markus Pargmann
• [PATCH v6] ARM: DTS: imx5* imx6*, use imx51-ssi   Markus Pargmann
• [PATCH v6] ARM: DTS: imx5* imx6*, use imx51-ssi   Markus Pargmann
• [PATCH] regulator: core bugfix: Use normal enable for always_on regulators   Markus Pargmann
• [PATCH v2 0/2] regulator: core: Fix ops->enable/disable usage   Markus Pargmann
• [PATCH v2 1/2] regulator: core: Replace direct ops->enable usage   Markus Pargmann
• [PATCH v2 2/2] regulator: core: Replace direct ops->disable usage   Markus Pargmann
• [PATCH v2 2/2] regulator: core: Replace direct ops->disable usage   Markus Pargmann
• [PATCH v2 2/2] regulator: core: Replace direct ops->disable usage   Markus Pargmann
• [PATCH 0/3] arm imx25 touchscreen/ADC drivers   Markus Pargmann
• [PATCH 1/3] mfd: fsl imx25 Touchscreen ADC driver   Markus Pargmann
• [PATCH 2/3] input: touchscreen: imx25 tcq driver   Markus Pargmann
• [PATCH 3/3] iio: adc: fsl,imx25-gcq driver   Markus Pargmann
• [PATCH v3 0/2] regulator: core: Fix ops->enable/disable usage   Markus Pargmann
• [PATCH v3 1/2] regulator: core: Replace direct ops->enable usage   Markus Pargmann
• [PATCH v3 2/2] regulator: core: Replace direct ops->disable usage   Markus Pargmann
• [PATCH 1/3] mfd: fsl imx25 Touchscreen ADC driver   Markus Pargmann
• [PATCH 3/3] iio: adc: fsl,imx25-gcq driver   Markus Pargmann
• [PATCH 1/3] mfd: fsl imx25 Touchscreen ADC driver   Markus Pargmann
• [PATCH v3 0/2] regulator: core: Fix ops->enable/disable usage   Markus Pargmann
• [PATCH 0/2] regulator: core: always_on fixups   Markus Pargmann
• [PATCH 1/2] regulator: dummy: Should be always-on   Markus Pargmann
• [PATCH 2/2] regulator: core: Error on not always_on dummy regulators   Markus Pargmann
• [PATCH 2/3] input: touchscreen: imx25 tcq driver   Markus Pargmann
• [PATCH 00/15] ASoC: fsl-ssi: Driver cleanup   Markus Pargmann
• [PATCH 01/15] ASoC: fsl-ssi: Use regmap   Markus Pargmann
• [PATCH 02/15] ASoC: fsl-ssi: Remove fsl_ssi_setup   Markus Pargmann
• [PATCH 03/15] ASoC: fsl-ssi: Move debugging to seperate file   Markus Pargmann
• [PATCH 04/15] ASoC: fsl-ssi: Use dev_name for DAI driver struct   Markus Pargmann
• [PATCH 05/15] ASoC: fsl-ssi: Move imx-specific probe to seperate function   Markus Pargmann
• [PATCH 06/15] ASoC: fsl-ssi: Remove useless DMA code   Markus Pargmann
• [PATCH 07/15] ASoC: fsl-ssi: baud clock error handling   Markus Pargmann
• [PATCH 08/15] ASoC: fsl-ssi: Cleanup probe function   Markus Pargmann
• [PATCH 09/15] ASoC: fsl-ssi: Remove unnecessary variables from ssi_private   Markus Pargmann
• [PATCH 10/15] ASoC: fsl-ssi: reorder and document fsl_ssi_private   Markus Pargmann
• [PATCH 11/15] ASoC: fsl-ssi: Fix register values when disabling   Markus Pargmann
• [PATCH 12/15] ASoC: fsl-ssi: Only enable baudclk when used   Markus Pargmann
• [PATCH 13/15] ASoC: fsl-ssi: Set default dai-fmts   Markus Pargmann
• [PATCH 14/15] ASoC: fsl-ssi: Transmit enable synchronization   Markus Pargmann
• [PATCH 15/15] ASoC: fsl-ssi: Update binding documentation   Markus Pargmann
• [PATCH 01/15] ASoC: fsl-ssi: Use regmap   Markus Pargmann
• [PATCH] security: select correct default LSM_MMAP_MIN_ADDR on arm on arm64   Eric Paris
• [PATCH v2 2/3] ARM/ARM64: KVM: Add support for PSCI v0.2 emulation   Anup Patel
• [PATCH v2 2/3] ARM/ARM64: KVM: Add support for PSCI v0.2 emulation   Anup Patel
• [PATCH v2 1/3] KVM: Add capability to advertise PSCI v0.2 support   Anup Patel
• [PATCH] ARM64: KVM: Fix VGIC compile error for Linux-3.14-rc1   Anup Patel
• [PATCH] ARM64: KVM: Fix VGIC compile error for Linux-3.14-rc1   Anup Patel
• [PATCH v3 0/4] In-kernel PSCI v0.2 emulation for KVM ARM/ARM64   Anup Patel
• [PATCH v3 1/4] ARM/ARM64: KVM: Add support for PSCI v0.2 emulation   Anup Patel
• [PATCH v3 2/4] KVM: Add capability to advertise PSCI v0.2 support   Anup Patel
• [PATCH v3 3/4] KVM: Documentation: Add info regarding KVM_ARM_VCPU_PSCI_0_2 feature   Anup Patel
• [PATCH v3 4/4] ARM/ARM64: KVM: Allow KVM_ARM_VCPU_PSCI_0_2 feature for user space   Anup Patel
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Anup Patel
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Anup Patel
• [PATCH v4 00/10] In-kernel PSCI v0.2 emulation for KVM ARM/ARM64   Anup Patel
• [PATCH v4 01/10] KVM: Add capability to advertise PSCI v0.2 support   Anup Patel
• [PATCH v4 02/10] ARM/ARM64: KVM: Add base for PSCI v0.2 emulation   Anup Patel
• [PATCH v4 03/10] KVM: Documentation: Add info regarding KVM_ARM_VCPU_PSCI_0_2 feature   Anup Patel
• [PATCH v4 04/10] ARM/ARM64: KVM: Make kvm_psci_call() return convention more flexible   Anup Patel
• [PATCH v4 05/10] KVM: Add KVM_EXIT_SYSTEM_EVENT to user space API header   Anup Patel
• [PATCH v4 06/10] ARM/ARM64: KVM: Emulate PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET   Anup Patel
• [PATCH v4 07/10] ARM/ARM64: KVM: Emulate PSCI v0.2 AFFINITY_INFO   Anup Patel
• [PATCH v4 08/10] ARM/ARM64: KVM: Emulate PSCI v0.2 MIGRATE_INFO_TYPE and related functions   Anup Patel
• [PATCH v4 09/10] ARM/ARM64: KVM: Fix CPU_ON emulation for PSCI v0.2   Anup Patel
• [PATCH v4 10/10] ARM/ARM64: KVM: Emulate PSCI v0.2 CPU_SUSPEND   Anup Patel
• [PATCH v4 02/10] ARM/ARM64: KVM: Add base for PSCI v0.2 emulation   Anup Patel
• [PATCH v4 02/10] ARM/ARM64: KVM: Add base for PSCI v0.2 emulation   Anup Patel
• [PATCH V3 0/4] mailbox: xgene: Add support for APM X-Gene SoC Queue Manager/Traffic Manager   Ravi Patel
• [PATCH V3 1/4] Documentation: mailbox: APM X-Gene SoC QMTM   Ravi Patel
• [PATCH V3 2/4] Documentation: devicetree: bindings for APM X-Gene SoC QMTM   Ravi Patel
• [PATCH V3 3/4] mailbox: xgene: base driver for APM X-Gene SoC QMTM   Ravi Patel
• [PATCH V3 4/4] arm64: boot: dts: entries for APM X-Gene SoC QMTM   Ravi Patel
• [PATCH v2 3/5] char: ti-usim: Add driver for USIM module on AM43xx   Satish Patel
• [PATCH 4/4] ARM: Kirkwood: Add support for many Synology NAS devices   Ben Peddell
• [PATCH v3 4/4] ARM: Kirkwood: Add support for many Synology NAS devices   Ben Peddell
• [PATCH v4 2/4] DT: Vendor prefixes: Add ricoh, ssi and synology   Ben Peddell
• [PATCH v5 4/5] ARM: Kirkwood: Fix qnap vendor prefix   Ben Peddell
• [ath9k-devel] [PATCH 1/3] ath9k: Fix build error on ARM   Joe Perches
• [ath9k-devel] [PATCH 1/3] ath9k: Fix build error on ARM   Joe Perches
• [Patch v5 1/2] dmaengine: add Qualcomm BAM dma driver   Joe Perches
• [ath9k-devel] [PATCH 1/3] ath9k: Fix build error on ARM   Joe Perches
• [ath9k-devel] [PATCH 1/3] ath9k: Fix build error on ARM   Joe Perches
• [ath9k-devel] [PATCH 1/3] ath9k: Fix build error on ARM   Joe Perches
• [ath9k-devel] [PATCH 1/3] ath9k: Fix build error on ARM   Joe Perches
• [PATCH 05/22] Add shared printk wrapper for consistent prefixing   Joe Perches
• [PATCH v5 00/14] Add support for MSM's mmio clock/reset controller   Joe Perches
• [PATCH v5 00/14] Add support for MSM's mmio clock/reset controller   Joe Perches
• [PATCH 08/14] net: axienet: Removed checkpatch errors/warnings   Joe Perches
• [PATCH 08/14] net: axienet: Removed checkpatch errors/warnings   Joe Perches
• [PATCH v4 5/5] ACPI: Replace printk with pr_* in tables.c   Joe Perches
• [PATCH v3 2/2] i2c: New bus driver for the Qualcomm QUP I2C controller   Joe Perches
• [PATCH 0/4] clk: mvebu: fix clk init order   Thomas Petazzoni
• [PATCH] mvebu : pcie: dt: potential issue in range parsing   Thomas Petazzoni
• [PATCH] PCI: MVEBU: Use Device ID and revision from underlying endpoint   Thomas Petazzoni
• [PATCH] PCI: MVEBU: Use Device ID and revision from underlying endpoint   Thomas Petazzoni
• [PATCH 03/21] ARM: Kirkwood: Convert mv88f6281gtw_ge switch setup to DT   Thomas Petazzoni
• [PATCH 19/21] ARM: MVEBU: Simplifiy headers and make local   Thomas Petazzoni
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Thomas Petazzoni
• [PATCH 19/21] ARM: MVEBU: Simplifiy headers and make local   Thomas Petazzoni
• [PATCH] gpio: mvebu: use chained_irq_{enter, exit} for GIC compatibility   Thomas Petazzoni
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Thomas Petazzoni
• [RFC PATCHv2 0/4] Add DT support for fixed PHYs   Thomas Petazzoni
• [alsa-devel] [PATCH 0/7] Audio support for Armada 370 DB   Thomas Petazzoni
• [alsa-devel] [PATCH 0/7] Audio support for Armada 370 DB   Thomas Petazzoni
• [PATCH 0/2] Marvell Armada 375 and 38x pinctrl drivers   Thomas Petazzoni
• [PATCH 1/2] pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 375   Thomas Petazzoni
• [PATCH 2/2] pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 380/385   Thomas Petazzoni
• [PATCH 00/11] Core support for Marvell Armada 375 and 38x   Thomas Petazzoni
• [PATCH 01/11] ARM: mvebu: add Armada 375 support to the system-controller driver   Thomas Petazzoni
• [PATCH 02/11] ARM: mvebu: add initial support for the Armada 375 SOCs   Thomas Petazzoni
• [PATCH 03/11] ARM: mvebu: add workaround for data abort issue on Armada 375   Thomas Petazzoni
• [PATCH 04/11] ARM: mvebu: add Device Tree description of the Armada 375 SoC   Thomas Petazzoni
• [PATCH 05/11] ARM: mvebu: add Device Tree for the Armada 375 DB board   Thomas Petazzoni
• [PATCH 06/11] ARM: mvebu: add Armada 380/385 support to the system-controller driver   Thomas Petazzoni
• [PATCH 07/11] ARM: mvebu: add initial support for the Armada 380/385 SOCs   Thomas Petazzoni
• [PATCH 08/11] ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs   Thomas Petazzoni
• [PATCH 09/11] ARM: mvebu: add Device Tree for the Armada 385 DB board   Thomas Petazzoni
• [PATCH 10/11] ARM: mvebu: update defconfigs for Armada 375 and 38x   Thomas Petazzoni
• [PATCH 11/11] Documentation: arm: update Marvell documentation about Armada 375/38x   Thomas Petazzoni
• [PATCH 06/11] ARM: mvebu: add Armada 380/385 support to the system-controller driver   Thomas Petazzoni
• [PATCH 05/11] ARM: mvebu: add Device Tree for the Armada 375 DB board   Thomas Petazzoni
• [PATCH 07/11] ARM: mvebu: add initial support for the Armada 380/385 SOCs   Thomas Petazzoni
• [PATCH 6/6] dt: Update binding information for mvebu gating clocks with Armada 380/385   Thomas Petazzoni
• [PATCH] ARM: mvebu: rename mvebu_defconfig to mvebu_v7_defconfig   Thomas Petazzoni
• [PATCH 06/11] ARM: mvebu: add Armada 380/385 support to the system-controller driver   Thomas Petazzoni
• [PATCH 06/11] ARM: mvebu: add Armada 380/385 support to the system-controller driver   Thomas Petazzoni
• [PATCH v2] clk: respect the clock dependencies in of_clk_init   Thomas Petazzoni
• [PATCH 4/8] ARM: mvebu: make use of of_find_matching_node_and_match   Thomas Petazzoni
• [PATCH 0/3] Minor Armada 370/XP cleanups   Thomas Petazzoni
• [PATCH 1/3] ARM: mvebu: remove unneeded ->map_io field for Armada 370/XP   Thomas Petazzoni
• [PATCH 2/3] ARM: mvebu: use GPIO DT defines in Armada 370/XP boards   Thomas Petazzoni
• [PATCH 3/3] ARM: mvebu: use input DT defines in Armada 370/XP boards   Thomas Petazzoni
• [PATCH 4/8] ARM: mvebu: make use of of_find_matching_node_and_match   Thomas Petazzoni
• [PATCH 2/3] ARM: mvebu: use GPIO DT defines in Armada 370/XP boards   Thomas Petazzoni
• [PATCH v2 00/10] Core support for Marvell Armada 375 and 38x   Thomas Petazzoni
• [PATCH v2 01/10] ARM: mvebu: add Armada 375 support to the system-controller driver   Thomas Petazzoni
• [PATCH v2 02/10] ARM: mvebu: add initial support for the Armada 375 SOCs   Thomas Petazzoni
• [PATCH v2 03/10] ARM: mvebu: add workaround for data abort issue on Armada 375   Thomas Petazzoni
• [PATCH v2 04/10] ARM: mvebu: add Device Tree description of the Armada 375 SoC   Thomas Petazzoni
• [PATCH v2 05/10] ARM: mvebu: add Device Tree for the Armada 375 DB board   Thomas Petazzoni
• [PATCH v2 06/10] ARM: mvebu: add initial support for the Armada 380/385 SOCs   Thomas Petazzoni
• [PATCH v2 07/10] ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs   Thomas Petazzoni
• [PATCH v2 08/10] ARM: mvebu: add Device Tree for the Armada 385 DB board   Thomas Petazzoni
• [PATCH v2 09/10] ARM: mvebu: update defconfigs for Armada 375 and 38x   Thomas Petazzoni
• [PATCH v2 10/10] Documentation: arm: update Marvell documentation about Armada 375/38x   Thomas Petazzoni
• [PATCH v4 0/8] Device Tree support for the at91sam9261ek   Thomas Petazzoni
• [PATCH v4 0/8] Device Tree support for the at91sam9261ek   Thomas Petazzoni
• [PATCH v2 0/7] Audio support for Armada 370 DB   Thomas Petazzoni
• [PATCH v2 1/7] sound: ASoC: add ASoC board driver for Armada 370 DB   Thomas Petazzoni
• [PATCH v2 2/7] sound: ASoC: add S/PDIF support to Armada 370 DB ASoC driver   Thomas Petazzoni
• [PATCH v2 3/7] ARM: mvebu: add audio I2S controller to Armada 370 Device Tree   Thomas Petazzoni
• [PATCH v2 4/7] ARM: mvebu: add I2C0 muxing option for Armada 370 SoC   Thomas Petazzoni
• [PATCH v2 5/7] ARM: mvebu: add audio support to Armada 370 DB   Thomas Petazzoni
• [PATCH v2 6/7] ARM: mvebu: enable S/PDIF audio in Armada 370 DB Device Tree   Thomas Petazzoni
• [PATCH v2 7/7] ARM: mvebu: enable audio options in mvebu_defconfig   Thomas Petazzoni
• [PATCH 2/3] PCI: ARM: add support for virtual PCI host controller   Thomas Petazzoni
• [PATCH v2 02/10] ARM: mvebu: add initial support for the Armada 375 SOCs   Thomas Petazzoni
• [PATCH v2 03/10] ARM: mvebu: add workaround for data abort issue on Armada 375   Thomas Petazzoni
• [PATCH v2 05/10] ARM: mvebu: add Device Tree for the Armada 375 DB board   Thomas Petazzoni
• [PATCH v3 00/13] Core support for Marvell Armada 375 and 38x   Thomas Petazzoni
• [PATCH v3 01/13] ARM: mvebu: rename armada-370-xp.c to armada-mvebu.c   Thomas Petazzoni
• [PATCH v3 02/13] ARM: mvebu: rename DT machine structure for Armada 370/XP   Thomas Petazzoni
• [PATCH v3 03/13] ARM: mvebu: make CPU_PJ4B selection a per-SoC choice   Thomas Petazzoni
• [PATCH v3 04/13] ARM: mvebu: add Armada 375 support to the system-controller driver   Thomas Petazzoni
• [PATCH v3 05/13] ARM: mvebu: add initial support for the Armada 375 SOCs   Thomas Petazzoni
• [PATCH v3 06/13] ARM: mvebu: add workaround for data abort issue on Armada 375   Thomas Petazzoni
• [PATCH v3 07/13] ARM: mvebu: add Device Tree description of the Armada 375 SoC   Thomas Petazzoni
• [PATCH v3 08/13] ARM: mvebu: add Device Tree for the Armada 375 DB board   Thomas Petazzoni
• [PATCH v3 09/13] ARM: mvebu: add initial support for the Armada 380/385 SOCs   Thomas Petazzoni
• [PATCH v3 10/13] ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs   Thomas Petazzoni
• [PATCH v3 11/13] ARM: mvebu: add Device Tree for the Armada 385 DB board   Thomas Petazzoni
• [PATCH v3 12/13] ARM: mvebu: update defconfigs for Armada 375 and 38x   Thomas Petazzoni
• [PATCH v3 13/13] Documentation: arm: update Marvell documentation about Armada 375/38x   Thomas Petazzoni
• [PATCH v3 01/13] ARM: mvebu: rename armada-370-xp.c to armada-mvebu.c   Thomas Petazzoni
• [PATCH v3 01/13] ARM: mvebu: rename armada-370-xp.c to armada-mvebu.c   Thomas Petazzoni
• [PATCH v3 01/13] ARM: mvebu: rename armada-370-xp.c to armada-mvebu.c   Thomas Petazzoni
• [PATCH v3 00/13] pinctrl: mvebu: restructure resource allocation   Thomas Petazzoni
• [PATCH v3 00/13] pinctrl: mvebu: restructure resource allocation   Thomas Petazzoni
• [PATCH v3 00/13] pinctrl: mvebu: restructure resource allocation   Thomas Petazzoni
• [PATCH 0/5] mv64xxx updates   Thomas Petazzoni
• [BUG] FL1009: xHCI host not responding to stop endpoint command.   Thomas Petazzoni
• [PATCH 1/3] ARM: at91: Add at91sam9rl DT SoC support   Thomas Petazzoni
• [PATCH v3 01/13] ARM: mvebu: rename armada-370-xp.c to armada-mvebu.c   Thomas Petazzoni
• [PATCH v4 00/13] Core support for Marvell Armada 375 and 38x   Thomas Petazzoni
• [PATCH v4 01/13] ARM: mvebu: rename armada-370-xp.c to board-v7.c   Thomas Petazzoni
• [PATCH v4 02/13] ARM: mvebu: rename DT machine structure for Armada 370/XP   Thomas Petazzoni
• [PATCH v4 03/13] ARM: mvebu: make CPU_PJ4B selection a per-SoC choice   Thomas Petazzoni
• [PATCH v4 04/13] ARM: mvebu: add Armada 375 support to the system-controller driver   Thomas Petazzoni
• [PATCH v4 05/13] ARM: mvebu: add initial support for the Armada 375 SOCs   Thomas Petazzoni
• [PATCH v4 06/13] ARM: mvebu: add workaround for data abort issue on Armada 375   Thomas Petazzoni
• [PATCH v4 07/13] ARM: mvebu: add Device Tree description of the Armada 375 SoC   Thomas Petazzoni
• [PATCH v4 08/13] ARM: mvebu: add Device Tree for the Armada 375 DB board   Thomas Petazzoni
• [PATCH v4 09/13] ARM: mvebu: add initial support for the Armada 380/385 SOCs   Thomas Petazzoni
• [PATCH v4 10/13] ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs   Thomas Petazzoni
• [PATCH v4 11/13] ARM: mvebu: add Device Tree for the Armada 385 DB board   Thomas Petazzoni
• [PATCH v4 12/13] ARM: mvebu: update defconfigs for Armada 375 and 38x   Thomas Petazzoni
• [PATCH v4 13/13] Documentation: arm: update Marvell documentation about Armada 375/38x   Thomas Petazzoni
• [PATCH 0/2] Marvell Armada 375 and 38x pinctrl drivers   Thomas Petazzoni
• [PATCH v4 00/13] Core support for Marvell Armada 375 and 38x   Thomas Petazzoni
• [PATCH] net: ethernet: remove unneeded dependency of mvneta and update help text   Thomas Petazzoni
• [PATCH] net: ethernet: remove unneeded dependency of mvneta and update help text   Thomas Petazzoni
• [BUG] FL1009: xHCI host not responding to stop endpoint command.   Thomas Petazzoni
• [PATCH] net: ethernet: remove unneeded dependency of mvneta and update help text   Thomas Petazzoni
• [PATCH v2] net: ethernet: update dependency and help text of mvneta   Thomas Petazzoni
• [PATCH] ARM: kernel: improve error message when LPAE config doesn't match CPU   Thomas Petazzoni
• [PATCH] rtc: mv: reset date if after year 2038   Thomas Petazzoni
• [PATCH] net: ethernet: remove unneeded dependency of mvneta and update help text   Thomas Petazzoni
• [PATCH] rtc: mv: reset date if after year 2038   Thomas Petazzoni
• [PATCH] net: ethernet: remove unneeded dependency of mvneta and update help text   Thomas Petazzoni
• pci-mvebu driver on km_kirkwood   Thomas Petazzoni
• [BUG] FL1009: xHCI host not responding to stop endpoint command.   Thomas Petazzoni
• [PATCH] rtc: mv: reset date if after year 2038   Thomas Petazzoni
• [PATCH] net: ethernet: remove unneeded dependency of mvneta and update help text   Thomas Petazzoni
• pci-mvebu driver on km_kirkwood   Thomas Petazzoni
• pci-mvebu driver on km_kirkwood   Thomas Petazzoni
• [PATCH v4 07/13] ARM: dts: mvebu: Add a new set of registers to the PMSU node   Thomas Petazzoni
• [PATCH v4 02/13] ARM: mvebu: remove the address parameter for ll_set_cpu_coherent   Thomas Petazzoni
• [PATCH v4 03/13] ARM: mvebu: ll_set_cpu_coherent always uses the current CPU   Thomas Petazzoni
• [PATCH v4 04/13] ARM: mvebu: Remove the unused argument of set_cpu_coherent()   Thomas Petazzoni
• [PATCH v4 13/13] ARM: mvebu: register the cpuidle driver for the Armada XP SoCs   Thomas Petazzoni
• [PATCH v4 12/13] cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoC   Thomas Petazzoni
• [PATCH v4 13/13] ARM: mvebu: register the cpuidle driver for the Armada XP SoCs   Thomas Petazzoni
• [PATCH v4 07/13] ARM: dts: mvebu: Add a new set of registers to the PMSU node   Thomas Petazzoni
• [PATCH v4 12/13] cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoC   Thomas Petazzoni
• pci-mvebu driver on km_kirkwood   Thomas Petazzoni
• [PATCH v4 00/13] Core support for Marvell Armada 375 and 38x   Thomas Petazzoni
• [PATCH 0/3] ARM: mvebu: Use preprocessor macros for Armada 375/38x DTs   Thomas Petazzoni
• [PATCH 1/3] ARM: mvebu: use C preprocessor include for Armada 375/38x DTs   Thomas Petazzoni
• [PATCH 2/3] ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs   Thomas Petazzoni
• [PATCH 3/3] ARM: mvebu: use macros for interrupt flags on Armada 375/38x   Thomas Petazzoni
• pci-mvebu driver on km_kirkwood   Thomas Petazzoni
• pci-mvebu driver on km_kirkwood   Thomas Petazzoni
• pci-mvebu driver on km_kirkwood   Thomas Petazzoni
• pci-mvebu driver on km_kirkwood   Thomas Petazzoni
• pci-mvebu driver on km_kirkwood   Thomas Petazzoni
• pci-mvebu driver on km_kirkwood   Thomas Petazzoni
• pci-mvebu driver on km_kirkwood   Thomas Petazzoni
• [PATCH 21/21] ARM: Kirkwood: Remove DT support   Thomas Petazzoni
• pci-mvebu driver on km_kirkwood   Thomas Petazzoni
• pci-mvebu driver on km_kirkwood   Thomas Petazzoni
• pci-mvebu driver on km_kirkwood   Thomas Petazzoni
• [PATCH 1/4] ARM: Kirkwood: Add audio node to kirkwood.dtsi   Thomas Petazzoni
• [PATCH 3/4] ARM: mvebu: Add HP T5325 thin client   Thomas Petazzoni
• [REGRESSION] 3.14-rc2 boot failure on Kirkwood (qnap ts-119p+)   Mikael Pettersson
• [REGRESSION] 3.14-rc2 boot failure on Kirkwood (qnap ts-119p+)   Mikael Pettersson
• [REGRESSION] 3.14-rc2 boot failure on Kirkwood (qnap ts-119p+)   Mikael Pettersson
• [PATCH] ARM: boot: compressed: ignore bswapsdi2.S   Kim Phillips
• [PATCH RFC v3 0/3] ARM: defining idle states DT bindings   Lorenzo Pieralisi
• [PATCH RFC v3 1/3] Documentation: devicetree: psci: define CPU suspend parameter   Lorenzo Pieralisi
• [PATCH RFC v3 2/3] Documentation: arm: add cache DT bindings   Lorenzo Pieralisi
• [PATCH RFC v3 3/3] Documentation: arm: define DT idle states bindings   Lorenzo Pieralisi
• [PATCH RFC v3 3/3] Documentation: arm: define DT idle states bindings   Lorenzo Pieralisi
• [PATCH RFC v3 3/3] Documentation: arm: define DT idle states bindings   Lorenzo Pieralisi
• [PATCH RFC v3 3/3] Documentation: arm: define DT idle states bindings   Lorenzo Pieralisi
• [PATCH v4 01/13] ARM: PJ4B: Add cpu_suspend/cpu_resume hooks for PJ4B   Lorenzo Pieralisi
• [PATCH v4 12/13] cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoC   Lorenzo Pieralisi
• [PATCH RFC v3 3/3] Documentation: arm: define DT idle states bindings   Lorenzo Pieralisi
• [PATCH RFC v3 3/3] Documentation: arm: define DT idle states bindings   Lorenzo Pieralisi
• [PATCH RFC v3 3/3] Documentation: arm: define DT idle states bindings   Lorenzo Pieralisi
• [PATCH RFC v4 0/3] ARM: defining idle states DT bindings   Lorenzo Pieralisi
• [PATCH RFC v4 1/3] Documentation: devicetree: psci: define CPU suspend parameter   Lorenzo Pieralisi
• [PATCH RFC v4 2/3] Documentation: arm: add cache DT bindings   Lorenzo Pieralisi
• [PATCH RFC v4 3/3] Documentation: arm: define DT idle states bindings   Lorenzo Pieralisi
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Lorenzo Pieralisi
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Lorenzo Pieralisi
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Lorenzo Pieralisi
• [PATCH] arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT   Lorenzo Pieralisi
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Lorenzo Pieralisi
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Lorenzo Pieralisi
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Lorenzo Pieralisi
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Lorenzo Pieralisi
• [PATCH v5 2/4] devicetree: bindings: Document Krait CPU/L1 EDAC   Lorenzo Pieralisi
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Lorenzo Pieralisi
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Lorenzo Pieralisi
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Lorenzo Pieralisi
• [PATCH v5 2/4] devicetree: bindings: Document Krait CPU/L1 EDAC   Lorenzo Pieralisi
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Lorenzo Pieralisi
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Lorenzo Pieralisi
• [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk   Lorenzo Pieralisi
• [PATCH v6 2/2] ARM hibernation / suspend-to-disk   Lorenzo Pieralisi
• [PATCH v6 2/2] ARM hibernation / suspend-to-disk   Lorenzo Pieralisi
• [PATCH] perf: ARM64: wire up perf_regs and unwind support   Jean Pihet
• [PATCH v6 0/3] perf: AARCH64 arch support   Jean Pihet
• [PATCH 1/3] ARM64: perf: add support for perf registers API   Jean Pihet
• [PATCH 2/3] ARM64: perf: add support for frame pointer unwinding in compat mode   Jean Pihet
• [PATCH 3/3] ARM64: perf: support dwarf unwinding in compat mode   Jean Pihet
• [PATCH v5 0/4] perf: AARCH64 arch support   Jean Pihet
• [PATCH] perf: ARM64: wire up perf_regs and unwind support   Jean Pihet
• [PATCH v6 0/3] perf: AARCH64 arch support   Jean Pihet
• [PATCH] perf: ARM64: wire up perf_regs and unwind support   Jean Pihet
• [PATCH] perf: ARM64: wire up perf_regs and unwind support   Jean Pihet
• [PATCH 0/2] clk: shmobile rcar-gen2 fixes   Laurent Pinchart
• [Linux-kernel] [PATCH 2/3] ARM: shmobile: r8a7790: specify multiple parents for cpg_clks   Laurent Pinchart
• [PATCH 1/2] clk: shmobile: rcar-gen2: Fix clock parent all non-PLL clocks   Laurent Pinchart
• [PATCH 1/3] clk: rcar-h2: fix sd0/sd1 divisor table   Laurent Pinchart
• [Linux-kernel] [PATCH 2/3] ARM: shmobile: r8a7790: specify multiple parents for cpg_clks   Laurent Pinchart
• [PATCH 1/3] clk: rcar-h2: fix sd0/sd1 divisor table   Laurent Pinchart
• [PATCH] ARM: shmobile: r8a7790: Correct SYS DMAC clock defines   Laurent Pinchart
• [PATCH 02/03] pinctrl: sh-pfc: r8a7790: Break out USB0 OVC/VBUS   Laurent Pinchart
• [PATCHv5] omap3: Add basic support for 720MHz part   Laurent Pinchart
• [PATCH 02/03] pinctrl: sh-pfc: r8a7790: Break out USB0 OVC/VBUS   Laurent Pinchart
• [PATCH 02/03] pinctrl: sh-pfc: r8a7790: Break out USB0 OVC/VBUS   Laurent Pinchart
• [PATCHv5] omap3: Add basic support for 720MHz part   Laurent Pinchart
• [PATCH 1/7] pinctrl: sh-pfc: r8a7790: Add QSPI pin groups   Laurent Pinchart
• [PATCH 0/5] mt9t001 and mt9p031 sensors drivers patches   Laurent Pinchart
• [PATCH 1/5] ARM: omap2: cm-t35: Add regulators and clock for camera sensor   Laurent Pinchart
• [PATCH 2/5] mt9t001: Add regulator support   Laurent Pinchart
• [PATCH 3/5] mt9t001: Add clock support   Laurent Pinchart
• [PATCH 4/5] mt9p031: Fix typo in comment   Laurent Pinchart
• [PATCH 5/5] mt9p031: Add support for PLL bypass   Laurent Pinchart
• [PATCH 2/2] ARM: shmobile: koelsch: add Ether DT support   Laurent Pinchart
• [PATCH v4 0/2] [RESEND] Lager and Koelsch reference serial port support   Laurent Pinchart
• [PATCH v4 1/2] ARM: shmobile: lager: Enable SCIF0 and SCIF1 serial ports in DT   Laurent Pinchart
• [PATCH v4 2/2] ARM: shmobile: koelsch: Enable SCIF0 and SCIF1 serial ports in DT   Laurent Pinchart
• [PATCH 00/27] Renesas CMT (Compare Match Timer) DT bindings   Laurent Pinchart
• [PATCH 01/27] clocksource: sh_cmt: Split channel fields from sh_cmt_priv   Laurent Pinchart
• [PATCH 02/27] clocksource: sh_cmt: Rename struct sh_cmt_priv to sh_cmt_device   Laurent Pinchart
• [PATCH 03/27] clocksource: sh_cmt: Split channel setup to separate function   Laurent Pinchart
• [PATCH 04/27] clocksource: sh_cmt: Rename mapbase/mapbase_str to mapbase_ch/mapbase   Laurent Pinchart
• [PATCH 05/27] clocksource: sh_cmt: Add memory base to sh_cmt_channel structure   Laurent Pinchart
• [PATCH 06/27] clocksource: sh_cmt: Add index to struct sh_cmt_channel   Laurent Pinchart
• [PATCH 07/27] clocksource: sh_cmt: Replace kmalloc + memset with kzalloc   Laurent Pinchart
• [PATCH 08/27] clocksource: sh_cmt: Allocate channels dynamically   Laurent Pinchart
• [PATCH 09/27] clocksource: sh_cmt: Split static information from sh_cmt_device   Laurent Pinchart
• [PATCH 10/27] clocksource: sh_cmt: Replace hardcoded register values with macros   Laurent Pinchart
• [PATCH 11/27] clocksource: sh_cmt: Add support for multiple channels per device   Laurent Pinchart
• [PATCH 12/27] clocksource: sh_cmt: Acquire default clock in the non-legacy case   Laurent Pinchart
• [PATCH 13/27] clocksource: sh_cmt: Remove FSF mail address from GPL notice   Laurent Pinchart
• [PATCH 14/27] clocksource: sh_cmt: Sort headers alphabetically   Laurent Pinchart
• [PATCH 15/27] sh: Switch to new style CMT device   Laurent Pinchart
• [PATCH 16/27] ARM: shmobile: sh7372: Switch to new style CMT device   Laurent Pinchart
• [PATCH 17/27] ARM: shmobile: sh73a0: Switch to new style CMT device   Laurent Pinchart
• [PATCH 18/27] ARM: shmobile: r8a73a4: Switch to new style CMT device   Laurent Pinchart
• [PATCH 19/27] ARM: shmobile: r8a7740: Switch to new style CMT device   Laurent Pinchart
• [PATCH 20/27] ARM: shmobile: r8a7790: Switch to new style CMT device   Laurent Pinchart
• [PATCH 21/27] ARM: shmobile: r8a7791: Switch to new style CMT device   Laurent Pinchart
• [PATCH 22/27] clocksource: sh_cmt: Drop support for legacy platform data   Laurent Pinchart
• [PATCH 23/27] clocksource: sh_cmt: Add DT support   Laurent Pinchart
• [PATCH 24/27] ARM: shmobile: r8a7790: Add CMT devices to DT   Laurent Pinchart
• [PATCH 25/27] ARM: shmobile: r8a7791: Add CMT devices to DT   Laurent Pinchart
• [PATCH 26/27] ARM: shmobile: lager-reference: Enable CMT0 in device tree   Laurent Pinchart
• [PATCH 27/27] ARM: shmobile: koelsch-reference: Enable CMT0 in device tree   Laurent Pinchart
• [PATCH 26/27] ARM: shmobile: lager-reference: Enable CMT0 in device tree   Laurent Pinchart
• [PATCH 26/27] ARM: shmobile: lager-reference: Enable CMT0 in device tree   Laurent Pinchart
• [PATCH 23/27] clocksource: sh_cmt: Add DT support   Laurent Pinchart
• [PATCH 23/27] clocksource: sh_cmt: Add DT support   Laurent Pinchart
• [PATCH 23/27] clocksource: sh_cmt: Add DT support   Laurent Pinchart
• [PATCH 23/27] clocksource: sh_cmt: Add DT support   Laurent Pinchart
• [PATCH 26/27] ARM: shmobile: lager-reference: Enable CMT0 in device tree   Laurent Pinchart
• [PATCH 11/27] clocksource: sh_cmt: Add support for multiple channels per device   Laurent Pinchart
• [PATCH 23/27] clocksource: sh_cmt: Add DT support   Laurent Pinchart
• [PATCH 11/27] clocksource: sh_cmt: Add support for multiple channels per device   Laurent Pinchart
• [PATCH 11/27] clocksource: sh_cmt: Add support for multiple channels per device   Laurent Pinchart
• [PATCH] ARM: shmobile: Remove __init from rcar_gen2_read_mode_pins()   Laurent Pinchart
• [PATCH] ARM: shmobile: Remove Lager DT reference legacy clock bits   Laurent Pinchart
• [PATCH] ARM: shmobile: Remove Koelsch DT reference legacy clock bits   Laurent Pinchart
• [PATCH 23/27] clocksource: sh_cmt: Add DT support   Laurent Pinchart
• [PATCH 23/27] clocksource: sh_cmt: Add DT support   Laurent Pinchart
• [PATCH 1/5] ARM: omap2: cm-t35: Add regulators and clock for camera sensor   Laurent Pinchart
• [PATCH 1/5] ARM: omap2: cm-t35: Add regulators and clock for camera sensor   Laurent Pinchart
• [PATCH v2 01/19] serial: sh-sci: Enable the driver on all ARM platforms   Laurent Pinchart
• [PATCH 01/11] ARM: shmobile: r8a7791 dtsi: Fix typo in msiof2 clock output name   Laurent Pinchart
• [PATCH] clk: shmobile: div6: use proper description in kernel doc   Laurent Pinchart
• [PATCH 2/2] ARM: dts: duovero-parlor: Add HDMI output   Laurent Pinchart
• [PATCHv2 01/16] iommu/omap: convert to devm_* interfaces   Laurent Pinchart
• [PATCHv2 02/16] iommu/omap: omap_iommu_attach() should return ENODEV, not NULL   Laurent Pinchart
• [PATCHv2 07/16] iommu/omap: allow enable/disable even without pdata   Laurent Pinchart
• [PATCHv2 08/16] ARM: OMAP3: remove deprecated CONFIG_OMAP_IOMMU_IVA2   Laurent Pinchart
• [PATCHv2 03/16] Documentation: dt: add OMAP iommu bindings   Laurent Pinchart
• [PATCHv2 02/16] iommu/omap: omap_iommu_attach() should return ENODEV, not NULL   Laurent Pinchart
• [PATCHv2 03/16] Documentation: dt: add OMAP iommu bindings   Laurent Pinchart
• [PATCH v3 01/20] clk: shmobile: r8a7779: Add clocks support   Laurent Pinchart
• [PATCH v3 02/20] clk: shmobile: r8a7779: Add MSTP clock support   Laurent Pinchart
• [PATCH v3 03/20] ARM: shmobile: r8a7779: Add clock index macros for DT sources   Laurent Pinchart
• [PATCH v3 01/20] clk: shmobile: r8a7779: Add clocks support   Laurent Pinchart
• [PATCH v3 04/20] ARM: shmobile: r8a7779: Add clocks   Laurent Pinchart
• [PATCH v3 05/20] ARM: shmobile: Sync Marzen DTS with Marzen reference DTS   Laurent Pinchart
• [PATCH v3 06/20] ARM: shmobile: marzen: Specify external clock frequency in DT   Laurent Pinchart
• [PATCH v3 07/20] ARM: shmobile: marzen: Reference clocks   Laurent Pinchart
• [PATCH v3 08/20] ARM: shmobile: r8a7779: Reference clocks   Laurent Pinchart
• [PATCH v3 14/20] ARM: shmobile: marzen-reference: Initialize CPG device   Laurent Pinchart
• [PATCH v3 15/20] ARM: shmobile: marzen-reference: Instantiate clkdevs for SCIF and TMU   Laurent Pinchart
• [PATCH v3 04/20] ARM: shmobile: r8a7779: Add clocks   Laurent Pinchart
• [PATCHv2 03/16] Documentation: dt: add OMAP iommu bindings   Laurent Pinchart
• [PATCHv2 03/16] Documentation: dt: add OMAP iommu bindings   Laurent Pinchart
• [PATCH 3/4] ARM: dts: OMAP4: Add IOMMU nodes   Laurent Pinchart
• [PATCH] Documentation: clk: Add locking documentation   Laurent Pinchart
• [PATCHv2 03/16] Documentation: dt: add OMAP iommu bindings   Laurent Pinchart
• [PATCH] Documentation: clk: Add locking documentation   Laurent Pinchart
• [PATCH 00/02] ARM: shmobile: CCI and MCPM support for r8a7790   Laurent Pinchart
• [PATCH v2] Documentation: clk: Add locking documentation   Laurent Pinchart
• [PATCH 0/2] ARM SMMU fixes   Laurent Pinchart
• [PATCH 1/2] iommu/arm-smmu: Replace list walk with platform driver data   Laurent Pinchart
• [PATCH 2/2] iommu/arm-smmu: Return 0 on unmap failure   Laurent Pinchart
• [PATCH v2 6/6] cpu/idle.c: move to sched/idle.c   Nicolas Pitre
• [PATCH 1/2] PPC: powernv: remove redundant cpuidle_idle_call()   Nicolas Pitre
• [PATCH 2/2] ARM64: powernv: remove redundant cpuidle_idle_call()   Nicolas Pitre
• [PATCH 2/2] ARM64: powernv: remove redundant cpuidle_idle_call()   Nicolas Pitre
• [PATCH 1/2] PPC: powernv: remove redundant cpuidle_idle_call()   Nicolas Pitre
• [PATCH v2 6/6] cpu/idle.c: move to sched/idle.c   Nicolas Pitre
• [PATCH v2] ARM: asm: rename logical shift macros push pull into lspush lspull   Nicolas Pitre
• [PATCH v2] ARM: asm: rename logical shift macros push pull into lspush lspull   Nicolas Pitre
• [PATCH v2] ARM: asm: rename logical shift macros push pull into lspush lspull   Nicolas Pitre
• [PATCH v2] ARM: asm: rename logical shift macros push pull into lspush lspull   Nicolas Pitre
• [PATCH RESEND] ARM: mcpm: Make all mcpm functions notrace   Nicolas Pitre
• [PATCH v2 10/23] ARM: MM: Add DT binding for Feroceon L2 cache   Nicolas Pitre
• [PATCHv4 2/2] arm: Get rid of meminfo   Nicolas Pitre
• [PATCHv4 2/2] arm: Get rid of meminfo   Nicolas Pitre
• [PATCH RFC 03/31] mmc: sdio_irq: rework sdio irq handling   Nicolas Pitre
• [PATCH] ARM: boot: compressed: ignore bswapsdi2.S   Nicolas Pitre
• [RFC] ARM VM System Sepcification   Nicolas Pitre
• [PATCH 01/02] ARM: shmobile: Hook in MCPM and CCI to APMU code   Nicolas Pitre
• [PATCH v2 0/6] IIO pulse capture support for TI ECAP   Matt Porter
• [PATCH v2 1/6] iio: add support for pulse width capture devices   Matt Porter
• [PATCH v2 2/6] iio: pulse: add TI ECAP driver   Matt Porter
• [PATCH v2 3/6] iio: enable selection and build of pulse drivers   Matt Porter
• [PATCH v2 4/6] iio: Add ABI docs for pulse capture devices   Matt Porter
• [PATCH v2 5/6] pwm: enable TI PWMSS if the IIO tiecap driver is selected   Matt Porter
• [PATCH v2 6/6] ARM: dts: AM33XX: Add ecap interrupt properties   Matt Porter
• [PATCH 0/6] BCM59056 PMU regulator support   Matt Porter
• [PATCH 1/6] i2c: bcm-kona: register with subsys_initcall   Matt Porter
• [PATCH 2/6] regulator: add bcm59056 pmu DT binding   Matt Porter
• [PATCH 3/6] mfd: add bcm59056 pmu driver   Matt Porter
• [PATCH 4/6] regulator: add bcm59056 regulator driver   Matt Porter
• [PATCH 5/6] ARM: configs: bcm_defconfig: enable bcm59056 regulator support   Matt Porter
• [PATCH 6/6] ARM: dts: add bcm59056 pmu support and enable for bcm28155-ap   Matt Porter
• [PATCH 3/6] mfd: add bcm59056 pmu driver   Matt Porter
• [PATCH 0/6] BCM59056 PMU regulator support   Matt Porter
• [PATCH 3/6] mfd: add bcm59056 pmu driver   Matt Porter
• [PATCH 2/6] regulator: add bcm59056 pmu DT binding   Matt Porter
• [PATCH 4/6] regulator: add bcm59056 regulator driver   Matt Porter
• [PATCH RESEND] ARM: dts: add BeagleBone Audio Cape (Rev A) dtsi   Matt Porter
• [PATCH 1/6] i2c: bcm-kona: register with subsys_initcall   Matt Porter
• [PATCH RESEND] ARM: dts: add BeagleBone Audio Cape (Rev A) dtsi   Matt Porter
• [PATCH 1/6] i2c: bcm-kona: register with subsys_initcall   Matt Porter
• [PATCH v3 0/6] IIO pulse capture support for TI ECAP   Matt Porter
• [PATCH v3 1/6] iio: add support for pulse width capture devices   Matt Porter
• [PATCH v3 2/6] iio: pulse: add TI ECAP driver   Matt Porter
• [PATCH v3 3/6] iio: enable selection and build of pulse drivers   Matt Porter
• [PATCH v3 4/6] iio: Add ABI docs for pulse capture devices   Matt Porter
• [PATCH v3 5/6] pwm: enable TI PWMSS if the IIO tiecap driver is selected   Matt Porter
• [PATCH v3 6/6] ARM: dts: AM33XX: Add ecap interrupt properties   Matt Porter
• [PATCH] MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer   Matt Porter
• [PATCH v2] MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer   Matt Porter
• [PATCH v8 0/4] ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU   Matt Porter
• [PATCH v2 0/5] BCM59056 PMU regulator support   Matt Porter
• [PATCH v2 1/5] mfd: add bcm590xx pmu DT binding   Matt Porter
• [PATCH v2 2/5] mfd: add bcm590xx pmu driver   Matt Porter
• [PATCH v2 3/5] regulator: add bcm590xx regulator driver   Matt Porter
• [PATCH v2 4/5] ARM: configs: bcm_defconfig: enable bcm590xx regulator support   Matt Porter
• [PATCH v2 5/5] ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap   Matt Porter
• [PATCH v8 0/4] ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU   Matt Porter
• [PATCH] ARM: dts: remove bcm11351-brt.dts   Matt Porter
• [PATCH] ARM: dts: remove bcm11351-brt.dts   Matt Porter
• [PATCH v2] ARM: dts: remove bcm11351-brt.dts   Matt Porter
• [PATCH v2 2/3] clk: bcm281xx: don't disable unused peripheral clocks   Matt Porter
• [PATCH] ARM: bcm2835: Move to mach-bcm directory   Matt Porter
• [PATCH v6 8/8] ARM: brcmstb: dts: add a reference DTS for Broadcom 7445   Matt Porter
• [PATCH v6 0/8] ARM: brcmstb: Add Broadcom STB SoC support   Matt Porter
• [PATCH] ARM: bcm2835: Move to mach-bcm directory   Matt Porter
• [GIT PULL] bcm pinctrl rename   Matt Porter
• [PATCH v4 5/8] mmc: sdhci-bcm-kona: Add basic use of clocks   Matt Porter
• [PATCH v2] ARM: dts: Leave sdio1 as disabled on bcm28155-ap   Matt Porter
• UBI leb_write_unlock NULL pointer Oops (continuation) on ARM926   Bill Pringlemeir
• UBI leb_write_unlock NULL pointer Oops (continuation) on ARM926   Bill Pringlemeir
• UBI leb_write_unlock NULL pointer Oops (continuation) on ARM926   Bill Pringlemeir
• [PATCH] mfd: vexpress-sysreg: initialize "site" variable   Semen Protsenko
• [PATCH] arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT   Andre Przywara
• [PATCH v2 3/5] char: ti-usim: Add driver for USIM module on AM43xx   Roger Quadros
• [PATCH] ARM: OMAP4: hwmod: Fix SOFTRESET logic for OMAP4   Roger Quadros
• [PATCH] ARM: OMAP4: hwmod: Fix SOFTRESET logic for OMAP4   Roger Quadros
• [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY   Roger Quadros
• [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY   Roger Quadros
• [PATCH] ARM: dts: OMAP2+: Fix boot with multi_v7_defconfig   Roger Quadros
• [PATCH v9 2/4] ehci-platform: Add support for clks and phy passed through devicetree   Roger Quadros
• [PATCH v9 2/4] ehci-platform: Add support for clks and phy passed through devicetree   Roger Quadros
• [PATCH v9 2/4] ehci-platform: Add support for clks and phy passed through devicetree   Roger Quadros
• [PATCH] ARM: dts: OMAP2+: Fix boot with multi_v7_defconfig   Roger Quadros
• [PATCH 2/2] ehci-platform: Change compatible string from usb-ehci to ehci-platform   Roger Quadros
• [PATCH v2 1/2] ohci-platform: Change compatible string from usb-ohci to generic-ohci   Roger Quadros
• [PATCH] phy-core: Don't allow building phy-core as a module   Roger Quadros
• [PATCH v7 00/12] USB Host support for OMAP5 uEVM   Roger Quadros
• [PATCH v7 01/12] mfd: omap-usb-host: Use resource managed clk_get()   Roger Quadros
• [PATCH v7 02/12] mfd: omap-usb-host: Get clocks based on hardware revision   Roger Quadros
• [PATCH v7 03/12] mfd: omap-usb-host: Use clock names as per function for reference clocks   Roger Quadros
• [PATCH v7 04/12] mfd: omap-usb-host: Update DT clock binding information   Roger Quadros
• [PATCH v7 05/12] mfd: omap-usb-tll: Update DT clock binding information   Roger Quadros
• [PATCH v7 06/12] ARM: dts: omap4: Update omap-usb-host node   Roger Quadros
• [PATCH v7 07/12] ARM: dts: omap5: Update omap-usb-host node   Roger Quadros
• [PATCH v7 08/12] ARM: dts: omap4-panda: Provide USB PHY clock   Roger Quadros
• [PATCH v7 09/12] ARM: dts: omap5-uevm: Provide USB PHY clock   Roger Quadros
• [PATCH v7 10/12] ARM: OMAP2+: Remove legacy_init_ehci_clk()   Roger Quadros
• [PATCH v7 11/12] ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes   Roger Quadros
• [PATCH v7 12/12] usb: omap: dts: Update DT binding example usage   Roger Quadros
• [PATCH v7 02/12] mfd: omap-usb-host: Get clocks based on hardware revision   Roger Quadros
• [PATCH v7 03/12] mfd: omap-usb-host: Use clock names as per function for reference clocks   Roger Quadros
• [PATCH v7 03/12] mfd: omap-usb-host: Use clock names as per function for reference clocks   Roger Quadros
• [PATCH 1/2] usb: dwc3: core: continue probing if usb phy library returns -ENODEV/-ENXIO   Roger Quadros
• [PATCH v8 00/14] USB Host support for OMAP5 uEVM   Roger Quadros
• [PATCH v8 01/14] mfd: omap-usb-host: Get clocks based on hardware revision   Roger Quadros
• [PATCH v8 02/14] mfd: omap-usb-host: Always fail on clk_get() error   Roger Quadros
• [PATCH v8 03/14] mfd: omap-usb-host: Use clock names as per function for reference clocks   Roger Quadros
• [PATCH v8 04/14] mfd: omap-usb-host: Update DT clock binding information   Roger Quadros
• [PATCH v8 05/14] mfd: omap-usb-tll: Update DT clock binding information   Roger Quadros
• [PATCH v8 06/14] CLK: TI: OMAP3: Get rid of unused USB Host dummy clocks   Roger Quadros
• [PATCH v8 07/14] ARM: OMAP3: hwmod data: Remove optional clock from usb_host_hs module   Roger Quadros
• [PATCH v8 08/14] ARM: dts: omap4: Update omap-usb-host node   Roger Quadros
• [PATCH v8 09/14] ARM: dts: omap5: Update omap-usb-host node   Roger Quadros
• [PATCH v8 10/14] ARM: dts: omap4-panda: Provide USB PHY clock   Roger Quadros
• [PATCH v8 11/14] ARM: dts: omap5-uevm: Provide USB PHY clock   Roger Quadros
• [PATCH v8 12/14] ARM: OMAP2+: Remove legacy_init_ehci_clk()   Roger Quadros
• [PATCH v8 13/14] ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes   Roger Quadros
• [PATCH v8 14/14] usb: omap: dts: Update DT binding example usage   Roger Quadros
• [PATCH 1/2] usb: dwc3: core: continue probing if usb phy library returns -ENODEV/-ENXIO   Roger Quadros
• [PATCH 1/2] usb: dwc3: core: continue probing if usb phy library returns -ENODEV/-ENXIO   Roger Quadros
• [PATCH v8 03/14] mfd: omap-usb-host: Use clock names as per function for reference clocks   Roger Quadros
• [PATCH v8 03/14] mfd: omap-usb-host: Use clock names as per function for reference clocks   Roger Quadros
• [PATCH v8 06/14] CLK: TI: OMAP3: Get rid of unused USB Host dummy clocks   Roger Quadros
• [PATCH v8 01/14] mfd: omap-usb-host: Get clocks based on hardware revision   Roger Quadros
• [PATCH v9 0/9] USB Host support for OMAP5 uEVM   Roger Quadros
• [PATCH v9 1/9] mfd: omap-usb-host: Get clocks based on hardware revision   Roger Quadros
• [PATCH v9 2/9] mfd: omap-usb-host: Always fail on clk_get() error   Roger Quadros
• [PATCH v9 3/9] mfd: omap-usb-host: Use proper clock name instead of alias   Roger Quadros
• [PATCH v9 4/9] mfd: omap-usb-host: Use clock names as per function for reference clocks   Roger Quadros
• [PATCH v9 5/9] mfd: omap-usb-host: Update DT clock binding information   Roger Quadros
• [PATCH v9 6/9] mfd: omap-usb-tll: Update DT clock binding information   Roger Quadros
• [PATCH v9 7/9] ARM: OMAP2+: Remove legacy_init_ehci_clk()   Roger Quadros
• [PATCH v9 8/9] ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes   Roger Quadros
• [PATCH v9 9/9] usb: omap: dts: Update DT binding example usage   Roger Quadros
• [PATCH V5 2/4] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP   Sricharan R
• [PATCH V5 2/4] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP   Sricharan R
• [PATCH V5 2/4] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP   Sricharan R
• [PATCH 00/26] OMAP dma engine rework   Sricharan R
• [PATCH V5 2/4] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP   Sricharan R
• [PATCH] can: xilinx CAN controller support.   Appana Durga Kedareswara Rao
• [PATCH v2] can: xilinx CAN controller support.   Appana Durga Kedareswara Rao
• [PATCH v4] can: xilinx CAN controller support.   Appana Durga Kedareswara Rao
• [PATCH v4] can: xilinx CAN controller support.   Appana Durga Kedareswara Rao
• [PATCH v4] can: xilinx CAN controller support.   Appana Durga Kedareswara Rao
• [PATCH v4] can: xilinx CAN controller support.   Appana Durga Kedareswara Rao
• [PATCH v4] can: xilinx CAN controller support.   Appana Durga Kedareswara Rao
• [PATCH v4] can: xilinx CAN controller support.   Appana Durga Kedareswara Rao
• about last level cache on big little cpu   Morten Rasmussen
• [PATCH resend] pwm: Remove obsolete HAVE_PWM Kconfig symbol   Thierry Reding
• [PATCH] backlight: add PWM dependencies   Thierry Reding
• [PATCH v3 1/2] drivers/base: permit base components to omit the bind/unbind ops   Thierry Reding
• [PATCH] ARM: tegra: dalmore: fix irq trigger type   Thierry Reding
• [PATCH] ARM: tegra: don't timeout if CPU is powergated   Thierry Reding
• [PATCH] ARM: tegra: don't timeout if CPU is powergated   Thierry Reding
• [PATCH] ARM: tegra: Add head numbers to display controllers   Thierry Reding
• [PATCH] backlight: add PWM dependencies   Thierry Reding
• [PATCH v3] pwm: add CSR SiRFSoC PWM driver   Thierry Reding
• [PATCH v3 5/6] pwm: enable TI PWMSS if the IIO tiecap driver is selected   Thierry Reding
• [PATCH resend] pwm: Remove obsolete HAVE_PWM Kconfig symbol   Thierry Reding
• [PATCH 1/2] mfd: twl4030-madc: Add devicetree support.   Sebastian Reichel
• [PATCH v4 2/4] DT: Vendor prefixes: Add ricoh, ssi and synology   Sebastian Reichel
• [PATCH 2/2] ARM: dts: duovero-parlor: Add HDMI output   Sebastian Reichel
• [PATCH 3/9] Doc/DT: Add DT binding documentation for DVI Connector   Sebastian Reichel
• Recent 3.x kernels: Memory leak causing OOMs   David Rientjes
• Recent 3.x kernels: Memory leak causing OOMs   David Rientjes
• [PATCH] ARM: sun7i: dt: Fix interrupt trigger types   Maxime Ripard
• [PATCH 1/2] clk: sunxi: Add new clock compatibles   Maxime Ripard
• [PATCH 2/2] ARM: sunxi: dt: Convert to the new clock compatibles   Maxime Ripard
• [PATCH 1/2] clocksource: sunxi: Add new compatibles   Maxime Ripard
• [PATCH 2/2] ARM: sunxi: dt: Convert to the new clocksource compatible   Maxime Ripard
• [PATCH 1/2] i2c: sunxi: Add new i2c compatibles   Maxime Ripard
• [PATCH 2/2] ARM: sunxi: dt: Convert to the new i2c compatibles   Maxime Ripard
• [PATCH 1/2] irqchip: sunxi: Add new compatibles   Maxime Ripard
• [PATCH 2/2] ARM: sunxi: dt: Convert to the new irq controller compatibles   Maxime Ripard
• [PATCH 1/3] net: ethernet: sunxi: Add new compatibles   Maxime Ripard
• [PATCH 2/3] net: phy: sunxi: Add new compatibles   Maxime Ripard
• [PATCH 3/3] ARM: sunxi: dt: Convert to the new net compatibles   Maxime Ripard
• [PATCH 1/2] rtc: sunxi: Add new compatibles   Maxime Ripard
• [PATCH 2/2] ARM: sunxi: dt: Convert to the new RTC compatibles   Maxime Ripard
• [PATCH 1/2] misc: eeprom: sunxi: Add new compatibles   Maxime Ripard
• [PATCH 2/2] ARM: sunxi: dt: Convert to the new SID compatibles   Maxime Ripard
• [PATCH] ARM: sunxi: dt: Change the touchscreen compatibles   Maxime Ripard
• [PATCH 1/3] wdt: sunxi: Introduce a new compatible for the A10 and A31   Maxime Ripard
• [PATCH 2/3] ARM: sunxi: Add the new watchog compatibles to the reboot code   Maxime Ripard
• [PATCH 3/3] ARM: sunxi: dt: Update the watchdog compatibles   Maxime Ripard
• [PATCH 0/3] spi: core: Introduce devm_spi_alloc_master   Maxime Ripard
• [RFC] dtc: add ability to make nodes conditional on them being referenced   Maxime Ripard
• [PATCH v3 1/8] clk: sunxi: Add Allwinner A20/A31 GMAC clock unit   Maxime Ripard
• [PATCH v3 2/8] ARM: dts: sun7i: Add GMAC clock node to sun7i DTSI   Maxime Ripard
• [PATCH v3 8/8] ARM: dts: sun7i: Add ethernet alias for GMAC   Maxime Ripard
• [PATCH 1/2] clocksource: sunxi: Add new compatibles   Maxime Ripard
• [PATCH 1/2] clocksource: sunxi: Add new compatibles   Maxime Ripard
• [PATCH 1/2] clocksource: sunxi: Add new compatibles   Maxime Ripard
• [PATCH v3 3/5] spi: sunxi: Add Allwinner A31 SPI controller driver   Maxime Ripard
• [PATCH v3 2/8] ARM: dts: sun7i: Add GMAC clock node to sun7i DTSI   Maxime Ripard
• [PATCH v3 1/8] clk: sunxi: Add Allwinner A20/A31 GMAC clock unit   Maxime Ripard
• [PATCH v2 2/5] clk: sunxi: Add USB clock register defintions   Maxime Ripard
• [PATCH v5 13/14] ARM: sun4i: dts: Add ahci / sata support   Maxime Ripard
• [PATCH v3 8/8] ARM: dts: sun7i: Add ethernet alias for GMAC   Maxime Ripard
• [PATCH v2 0/6] ARM: sunxi: Add driver for SD/MMC hosts found on allwinner sunxi SOCs   Maxime Ripard
• [PATCH 1/3] reset: Add of_reset_control_get   Maxime Ripard
• [PATCH v4 0/5] Add Allwinner A31 SPI controller support   Maxime Ripard
• [PATCH v4 1/5] clk: sunxi: Add support for PLL6 on the A31   Maxime Ripard
• [PATCH v4 2/5] ARM: sun6i: dt: Add PLL6 and SPI module clocks   Maxime Ripard
• [PATCH v4 3/5] spi: sunxi: Add Allwinner A31 SPI controller driver   Maxime Ripard
• [PATCH v4 4/5] ARM: sun6i: dt: Add SPI controllers to the A31 DTSI   Maxime Ripard
• [PATCH v4 5/5] ARM: sunxi: Enable A31 SPI and SID in the defconfig   Maxime Ripard
• [PATCH v2 0/2] clk: sunxi: Change compatibles pattern   Maxime Ripard
• [PATCH v2 1/2] clk: sunxi: Add new clock compatibles   Maxime Ripard
• [PATCH v2 2/2] ARM: sunxi: dt: Convert to the new clock compatibles   Maxime Ripard
• [PATCH v2 0/2] clocksource: sunxi: Change compatibles pattern   Maxime Ripard
• [PATCH v2 1/2] clocksource: sunxi: Add new compatibles   Maxime Ripard
• [PATCH v2 2/2] ARM: sunxi: dt: Convert to the new clocksource compatible   Maxime Ripard
• [PATCH v2 0/2] i2c: sunxi: Change compatibles pattern   Maxime Ripard
• [PATCH v2 1/2] i2c: sunxi: Change i2c compatibles   Maxime Ripard
• [PATCH v2 2/2] ARM: sunxi: dt: Convert to the new i2c compatibles   Maxime Ripard
• [PATCH v2 0/5] ARM: sun6i: Add support for the A31 I2C controller   Maxime Ripard
• [PATCH 1/3] wdt: sunxi: Introduce a new compatible for the A10 and A31   Maxime Ripard
• [PATCH v2 2/5] clk: sunxi: Add USB clock register defintions   Maxime Ripard
• [PATCH v3 2/5] clk: sunxi: Add USB clock register defintions   Maxime Ripard
• [PATCH v4 0/8] ARM: sunxi: rename DT clock node names to clk at N   Maxime Ripard
• [PATCH v4 0/5] Add Allwinner A31 SPI controller support   Maxime Ripard
• [PATCH v4 2/5] clk: sunxi: Add USB clock register defintions   Maxime Ripard
• [PATCH v4 1/5] clk: sunxi: Add support for USB clock-register reset bits   Maxime Ripard
• [PATCH v2 0/2] irqchip: sun4i: Introduce a new compatible   Maxime Ripard
• [PATCH v2 1/2] irqchip: sunxi: Change compatibles   Maxime Ripard
• [PATCH v2 2/2] ARM: sunxi: dt: Convert to the new irq controller compatibles   Maxime Ripard
• [PATCH 1/2] ethernet: sun4i: Drop the older compatibles   Maxime Ripard
• [PATCH 2/2] mdio: sun4i: Drop the older compatibles   Maxime Ripard
• [PATCH v2 0/2] rtc: sunxi: Change compatible patterns   Maxime Ripard
• [PATCH v2 1/2] rtc: sunxi: Change compatibles   Maxime Ripard
• [PATCH v2 2/2] ARM: sunxi: dt: Convert to the new RTC compatibles   Maxime Ripard
• [PATCH v2 0/2] misc: eeprom: sunxi: Change compatible pattern   Maxime Ripard
• [PATCH v2 1/2] misc: eeprom: sunxi: Change compatibles   Maxime Ripard
• [PATCH v2 2/2] ARM: sunxi: dt: Convert to the new SID compatibles   Maxime Ripard
• [PATCH v2 0/3] watchdog: sunxi: Change compatible patterns   Maxime Ripard
• [PATCH v2 1/3] watchdog: sunxi: Change compatibles   Maxime Ripard
• [PATCH v2 2/3] ARM: sunxi: Add the new watchog compatibles to the reboot code   Maxime Ripard
• [PATCH v2 3/3] ARM: sunxi: dt: Update the watchdog compatibles   Maxime Ripard
• [PATCH] ARM: sun7i: dt: Fix interrupt trigger types   Maxime Ripard
• [PATCH] ARM: sunxi: dt: Change the touchscreen compatibles   Maxime Ripard
• [PATCH v2] ARM: sunxi: Add driver for sunxi usb phy   Maxime Ripard
• [PATCH v4 0/8] Add Allwinner A20 GMAC ethernet support   Maxime Ripard
• [PATCH v4 1/8] clk: sunxi: Add Allwinner A20/A31 GMAC clock unit   Maxime Ripard
• [PATCH 2/3] mfd: axp20x: Add dtsi for axp20x   Maxime Ripard
• [PATCH 1/3] mfd: axp20x: Add mfd driver for axp20x PMIC   Maxime Ripard
• [PATCH 3/3] mfd: axp20x: Add bindings documentation   Maxime Ripard
• [PATCH v2] ARM: sunxi: Add driver for sunxi usb phy   Maxime Ripard
• [linux-sunxi] Re: [PATCH 3/3] mfd: axp20x: Add bindings documentation   Maxime Ripard
• [PATCH 2/2] ehci-platform: Change compatible string from usb-ehci to ehci-platform   Maxime Ripard
• [PATCH] pinctrl: sunxi: use chained_irq_{enter, exit} for GIC compatibility   Maxime Ripard
• [PATCH v2 0/2] i2c: sunxi: Change compatibles pattern   Maxime Ripard
• [PATCH v2 2/2] ARM: sunxi: dt: Convert to the new i2c compatibles   Maxime Ripard
• [PATCH v2 2/2] ARM: sunxi: dt: Convert to the new i2c compatibles   Maxime Ripard
• [PATCH v2 0/5] ARM: sun6i: Add support for the A31 I2C controller   Maxime Ripard
• [PATCH v2 0/5] ARM: sun6i: Add support for the A31 I2C controller   Maxime Ripard
• [PATCH 3/4] pinctrl-sunxi: Fix masking when setting irq type   Maxime Ripard
• [PATCH 4/4] pinctrl-sunxi: Fix interrupt register offset calculation   Maxime Ripard
• [PATCH 0/5] mv64xxx updates   Maxime Ripard
• [PATCH v7 1/8] clk: sunxi: factors: automatic reparenting support   Maxime Ripard
• [PATCH v7 2/8] clk: sunxi: Implement MMC phase control   Maxime Ripard
• [PATCH v7 3/8] ARM: sunxi: clk: export clk_sunxi_mmc_phase_control   Maxime Ripard
• [PATCH v7 5/8] ARM: dts: sun7i: Add support for mmc   Maxime Ripard
• [PATCH v7 4/8] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Maxime Ripard
• [PATCH v7 8/8] ARM: sunxi: Add documentation for driver for SD/MMC hosts found on Allwinner sunxi SoCs   Maxime Ripard
• [PATCH v4 0/5] clk: sunxi usb clks support   Maxime Ripard
• [PATCH] ARM: sun7i: add arch timer node   Maxime Ripard
• [PATCH v2 2/2] ARM: sunxi: dt: Convert to the new clock compatibles   Maxime Ripard
• [PATCH v7 2/8] clk: sunxi: Implement MMC phase control   Maxime Ripard
• [PATCH v7 4/8] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Maxime Ripard
• [PATCHv2 1/8] ARM: at91: Add at91sam9rl DT SoC support   Maxime Ripard
• [PATCH v3 2/2] i2c: New bus driver for the Qualcomm QUP I2C controller   Maxime Ripard
• [PATCH v6 17/18] ARM: sun4i: dt: Add ahci / sata support   Maxime Ripard
• [PATCH v7 5/8] ARM: dts: sun7i: Add support for mmc   Maxime Ripard
• [PATCH v2 0/2] ARM: sunxi: Add A31 High Speed Timer Support   Maxime Ripard
• [PATCH v2 1/2] clocksource: sun5i: Add support for reset controller   Maxime Ripard
• [PATCH v2 2/2] ARM: sun6i: a31: Add support for the High Speed Timers   Maxime Ripard
• [PATCH v7 4/8] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Maxime Ripard
• [PATCH v7 8/8] ARM: sunxi: Add documentation for driver for SD/MMC hosts found on Allwinner sunxi SoCs   Maxime Ripard
• [PATCH v6 17/18] ARM: sun4i: dt: Add ahci / sata support   Maxime Ripard
• [PATCH 0/7] Add Allwinner A10 SPI Controller Driver   Maxime Ripard
• [PATCH 1/7] spi: sunxi: Add Allwinner A10 SPI controller driver   Maxime Ripard
• [PATCH 2/7] ARM: dt: sun7i: Add A20 SPI controller nodes   Maxime Ripard
• [PATCH 3/7] ARM: dt: sun4i: Add A10 SPI controller nodes   Maxime Ripard
• [PATCH 4/7] ARM: dt: sun5i: Add A10s SPI controller nodes   Maxime Ripard
• [PATCH 5/7] ARM: dt: sun5i: Add A13 SPI controller nodes   Maxime Ripard
• [PATCH 6/7] ARM: dt: sun7i: Add SPI muxing options   Maxime Ripard
• [PATCH 7/7] ARM: dts: sun7i: Enable the SPI controllers of the A20-olinuxino-micro   Maxime Ripard
• [PATCH v7 13/15] ARM: sun4i: dt: Remove grouping + simple-bus compatible for regulators   Maxime Ripard
• [PATCH 1/7] spi: sunxi: Add Allwinner A10 SPI controller driver   Maxime Ripard
• [PATCH 0/7] Add Allwinner A10 SPI Controller Driver   Maxime Ripard
• [PATCH v7 13/15] ARM: sun4i: dt: Remove grouping + simple-bus compatible for regulators   Maxime Ripard
• [PATCH v3 1/4] ARM: sunxi: Add driver for sunxi usb phy   Maxime Ripard
• [PATCH 0/5] Add support for the Allwinner A31 DMA Controller   Maxime Ripard
• [PATCH 1/5] clk: sun6i: Protect CPU clock   Maxime Ripard
• [PATCH 2/5] clk: sun6i: Reparent AHB clock on PLL6   Maxime Ripard
• [PATCH 3/5] clk: sun6i: Protect SDRAM gating bit   Maxime Ripard
• [PATCH 4/5] DMA: sun6i: Add driver for the Allwinner A31 DMA controller   Maxime Ripard
• [PATCH 5/5] ARM: sun6i: dt: Add A31 DMA controller to DTSI   Maxime Ripard
• [PATCH] ARM: sun6i: dt: Fix mod0 compatible   Maxime Ripard
• [PATCH 1/7] Documentation: dt: iio: improve atmel-adc documentation   Maxime Ripard
• [PATCH 4/5] DMA: sun6i: Add driver for the Allwinner A31 DMA controller   Maxime Ripard
• [PATCH] ARM: sun6i: dt: Fix mod0 compatible   Maxime Ripard
• [PATCH 4/5] DMA: sun6i: Add driver for the Allwinner A31 DMA controller   Maxime Ripard
• [PATCH v2 0/5] Add support for the Allwinner A31 DMA Controller   Maxime Ripard
• [PATCH v2 1/5] clk: sun6i: Protect CPU clock   Maxime Ripard
• [PATCH v2 2/5] clk: sun6i: Reparent AHB clock on PLL6   Maxime Ripard
• [PATCH v2 3/5] clk: sun6i: Protect SDRAM gating bit   Maxime Ripard
• [PATCH v2 4/5] DMA: sun6i: Add driver for the Allwinner A31 DMA controller   Maxime Ripard
• [PATCH v2 5/5] ARM: sun6i: dt: Add A31 DMA controller to DTSI   Maxime Ripard
• [PATCH v6 05/19] watchdog: orion: Make sure the watchdog is initially stopped   Guenter Roeck
• [PATCH v6 17/19] watchdog: orion: Enable the build on ARCH_MVEBU   Guenter Roeck
• [PATCH v6 05/19] watchdog: orion: Make sure the watchdog is initially stopped   Guenter Roeck
• [PATCH v6 05/19] watchdog: orion: Make sure the watchdog is initially stopped   Guenter Roeck
• [PATCH 01/10] watchdog: xilinx: Convert driver to the watchdog framework   Guenter Roeck
• [PATCH 02/10] watchdog: xilinx: Move control_status_reg to functions   Guenter Roeck
• [03/10] watchdog: xilinx: Simplify probe and remove functions   Guenter Roeck
• [PATCH 04/10] watchdog: xilinx: Move no_timeout to probe function   Guenter Roeck
• [PATCH 05/10] watchdog: xilinx: Allocate private structure per device   Guenter Roeck
• [PATCH 06/10] watchdog: xilinx: Fix all printk messages   Guenter Roeck
• [PATCH 07/10] watchdog: xilinx: Fix OF binding   Guenter Roeck
• [PATCH 08/10] watchdog: xilinx: Use correct comment indentation   Guenter Roeck
• [PATCH 01/10] watchdog: xilinx: Convert driver to the watchdog framework   Guenter Roeck
• [PATCH v2 11/11] watchdog: xilinx: Remove no_timeout variable   Guenter Roeck
• [PATCH v2 07/11] watchdog: xilinx: Use of_property_read_u32   Guenter Roeck
• [PATCH 09/12] hwmon: vexpress: Use devm helper for hwmon device registration   Guenter Roeck
• [PATCH v3 07/11] watchdog: xilinx: Use of_property_read_u32   Guenter Roeck
• [PATCH v3 10/11] watchdog: xilinx: Enable this driver for Zynq   Guenter Roeck
• [PATCH v3 07/11] watchdog: xilinx: Use of_property_read_u32   Guenter Roeck
• [PATCH v3 07/11] watchdog: xilinx: Use of_property_read_u32   Guenter Roeck
• [PATCH v3 07/11] watchdog: xilinx: Use of_property_read_u32   Guenter Roeck
• [PATCH v3 07/11] watchdog: xilinx: Use of_property_read_u32   Guenter Roeck
• [PATCH 1/3] arm: dts: am33xx.dtsi: Add node name to rtc device node   Stefan Roese
• [PATCH 2/3] arm: dts: Add Siemens Draco SOM dtsi   Stefan Roese
• [PATCH 3/3] arm: dts: Add Siemens am335x-dxr2-e.dts   Stefan Roese
• [PATCH] arm: dts: Add support for Compulab sbc-t3530 with cm-t35   Stefan Roese
• [PATCH v3 1/6] arm64: Add ftrace support   Steven Rostedt
• change kmalloc into vmalloc for large memory allocations   Steven Rostedt
• [GIT PULL] tree-wide: clean up no longer required #include <linux/init.h>   Stephen Rothwell
• [GIT PULL] tree-wide: clean up no longer required #include <linux/init.h>   Stephen Rothwell
• [linux-next] Adding keystone kernel tree   Stephen Rothwell
• linux-next: manual merge of the imx-mxs tree with the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the arm-perf tree   Stephen Rothwell
• linux-next: manual merge of the mvebu tree with Linus' tree   Stephen Rothwell
• linux-next: manual merge of the sound-asoc tree with the mvebu tree   Stephen Rothwell
• linux-next: manual merge of the watchdog tree with the mvebu tree   Stephen Rothwell
• linux-next: manual merge of the staging tree with the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the staging tree with the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the mvebu tree with the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the crypto tree with the arm-soc tree   Stephen Rothwell
• [PATCH v5 00/14] Add support for MSM's mmio clock/reset controller   Frank Rowand
• [PATCH v5 00/14] Add support for MSM's mmio clock/reset controller   Frank Rowand
• [PATCH v5 00/14] Add support for MSM's mmio clock/reset controller   Frank Rowand
• [PATCH v5 00/14] Add support for MSM's mmio clock/reset controller   Frank Rowand
• [PATCH] thermal: imx: update formula for thermal sensor   Zhang Rui
• [PATCH] Detect section mismatches in thumb relocations   Rusty Russell
• [PATCH v2 2/3] ARM/ARM64: KVM: Add support for PSCI v0.2 emulation   Mark Rutland
• [PATCH v2 2/3] ARM/ARM64: KVM: Add support for PSCI v0.2 emulation   Mark Rutland
• [PATCH v2 1/3] KVM: Add capability to advertise PSCI v0.2 support   Mark Rutland
• [PATCH v2 1/3] KVM: Add capability to advertise PSCI v0.2 support   Mark Rutland
• [PATCH 0/7] primecell: make correct clock parsing possible   Mark Rutland
• [PATCH 1/7] Documentation: devicetree: fix up pl011 clocks   Mark Rutland
• [PATCH 2/7] serial: amba-pl011: attempt to get uartclk by name   Mark Rutland
• [PATCH 3/7] Documentation: devicetree: fix up pl022 clocks   Mark Rutland
• [PATCH 4/7] spi: pl022: attempt to get sspclk by name   Mark Rutland
• [PATCH 5/7] Documentation: devicetree: fix up pl18x clocks   Mark Rutland
• [PATCH 6/7] mmc: arm-mmci: attempt to get mclk by name   Mark Rutland
• [PATCH 7/7] Documentation: devicetree: loosen primecell clock requirements   Mark Rutland
• [PATCH 4/7] spi: pl022: attempt to get sspclk by name   Mark Rutland
• [PATCH 0/7] primecell: make correct clock parsing possible   Mark Rutland
• [PATCH 1/3] arm64: dts: add initial dts for Samsung GH7 SoC and SSDK-GH7 board   Mark Rutland
• [PATCH] ARM: dts: imx6qdl-sabresd: Do not place regulator nodes under simple-bus   Mark Rutland
• [PATCH 4/7] spi: pl022: attempt to get sspclk by name   Mark Rutland
• [PATCH] arm: vmlinux.lds.S: drop redundant .comment   Mark Rutland
• [PATCH 1/3] arm64: dts: add initial dts for Samsung GH7 SoC and SSDK-GH7 board   Mark Rutland
• [PATCH 4/7] spi: pl022: attempt to get sspclk by name   Mark Rutland
• [PATCH] ARM: dts: imx6qdl-sabresd: Do not place regulator nodes under simple-bus   Mark Rutland
• [PATCH] ARM: mm: cache-l2x0: Check for status property of DT node   Mark Rutland
• [PATCH 4/7] spi: pl022: attempt to get sspclk by name   Mark Rutland
• [PATCH 1/4] phy: miphy365x: Add Device Tree bindings for the MiPHY365x   Mark Rutland
• [PATCH 4/4] phy: miphy365x: Provide support for the MiPHY356x Generic PHY   Mark Rutland
• [PATCH 1/4] phy: miphy365x: Add Device Tree bindings for the MiPHY365x   Mark Rutland
• [PATCH v2 3/3] PCI: ARM: add support for generic PCI host controller   Mark Rutland
• [PATCH v5 2/3] serial: fsl_lpuart: add DMA support   Mark Rutland
• [PATCH 1/2] clk: fixed-rate: use full DT node name   Mark Rutland
• [PATCH 2/2] ARM: bcm2835: fix clock DT node names   Mark Rutland
• [PATCH 23/27] clocksource: sh_cmt: Add DT support   Mark Rutland
• [PATCH v6 2/3] serial: fsl_lpuart: add DMA support   Mark Rutland
• [PATCH v3 1/7] Documentation: Add device tree bindings for Freescale i.MX GPC   Mark Rutland
• [PATCH 1/3] arm64: dts: add initial dts for Samsung GH7 SoC and SSDK-GH7 board   Mark Rutland
• [PATCH 1/2] clk: fixed-rate: use full DT node name   Mark Rutland
• [PATCHv2 1/8] ARM: at91: Add at91sam9rl DT SoC support   Mark Rutland
• [PATCHv2 3/8] ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek   Mark Rutland
• [PATCH v5 4/5] ARM: Kirkwood: Fix qnap vendor prefix   Mark Rutland
• [PATCHv2 1/8] ARM: at91: Add at91sam9rl DT SoC support   Mark Rutland
• [PATCH v5 2/2] memory: ti-aemif: add bindings for AEMIF driver   Mark Rutland
• [PATCH] ARM: boot: compressed: ignore bswapsdi2.S   Mark Rutland
• [PATCH v10 01/15] usb: doc: phy-mxs: Add more compatible strings   Mark Rutland
• [PATCH v10 04/15] usb: doc: phy-mxs: update binding for adding anatop phandle   Mark Rutland
• [PATCH v10 10/15] usb: phy-mxs: Add implementation of set_wakeup   Mark Rutland
• [Patch v6 1/2] dmaengine: qcom_bam_dma: Add device tree binding   Mark Rutland
• [Patch v6 2/2] dmaengine: add Qualcomm BAM dma driver   Mark Rutland
• [PATCH v3 1/2] i2c: qup: Add device tree bindings information   Mark Rutland
• [PATCH v3 2/2] i2c: New bus driver for the Qualcomm QUP I2C controller   Mark Rutland
• [PATCH] ARM: EDMA: Use platform_get_resource functions for DT   Mark Rutland
• [PATCH v10 01/15] usb: doc: phy-mxs: Add more compatible strings   Mark Rutland
• [PATCH v4 02/10] Documentation: dt: Add DT binding documentation for S5C73M3 camera   Mark Rutland
• [PATCH v4 03/10] Documentation: devicetree: Update Samsung FIMC DT binding   Mark Rutland
• [PATCH v4 07/10] exynos4-is: Add clock provider for the SCLK_CAM clock outputs   Mark Rutland
• [Patch v6 1/2] dmaengine: qcom_bam_dma: Add device tree binding   Mark Rutland
• [PATCH 1/3] Documentation:spi:fsl-dspi:add DSPI dma transfer support   Mark Rutland
• [PATCH 3/3] spi:fsl-dspi:add dspi dma transfer support   Mark Rutland
• [PATCH] ARM: boot: compressed: ignore bswapsdi2.S   Mark Rutland
• [PATCH v2 1/2] ARM: dts: imx6: adjust the interrupt list in order to support MSI   Mark Rutland
• [PATCH v2 2/2] PCI: imx6: add support for MSI   Mark Rutland
• [PATCH] rtc: rtc-s3c: Fix incorrect way of save/restore of S3C2410_TICNT for TYPE_S3C64XX   Vikas Sajjan
• arm64: kernel panic in paging_init()   Mark Salter
• arm64: kernel panic in paging_init()   Mark Salter
• arm64: kernel panic in paging_init()   Mark Salter
• [PATCH] arm64: fix early_io_map for 64K pages   Mark Salter
• [PATCH v4 0/6] generic early_ioremap support   Mark Salter
• [PATCH v4 2/6] mm: create generic early_ioremap() support   Mark Salter
• [PATCH v4 4/6] arm: add early_ioremap support   Mark Salter
• [PATCH v4 5/6] arm64: initialize pgprot info earlier in boot   Mark Salter
• [PATCH v4 6/6] arm64: add early_ioremap support   Mark Salter
• [PATCH 03/22] efi: add helper function to get UEFI params from FDT   Mark Salter
• [PATCH 16/22] arm64: Add function to create identity mappings   Mark Salter
• [PATCH v4 0/6] generic early_ioremap support   Mark Salter
• [PATCH v4 0/6] generic early_ioremap support   Mark Salter
• [PATCH v4 4/6] arm: add early_ioremap support   Mark Salter
• [PATCH 1/6] i2c: bcm-kona: register with subsys_initcall   Wolfram Sang
• [PATCH 1/2 v3] i2c: exynos5: add support for HSI2C on Exynos5260 SoC   Wolfram Sang
• [PATCH 00/17] i2c: deprecate class based instantiation for embedded I2C drivers   Wolfram Sang
• [PATCH 01/17] Documentation: i2c: describe devicetree method for instantiating devices   Wolfram Sang
• [PATCH 02/17] i2c: add deprecation warning for class based instantiation   Wolfram Sang
• [PATCH 10/17] i2c: i2c-nomadik: deprecate class based instantiation   Wolfram Sang
• [PATCH 13/17] i2c: i2c-s3c2410: deprecate class based instantiation   Wolfram Sang
• [PATCH 14/17] i2c: i2c-sirf: deprecate class based instantiation   Wolfram Sang
• [PATCH 15/17] i2c: i2c-stu300: deprecate class based instantiation   Wolfram Sang
• [PATCH 01/17] Documentation: i2c: describe devicetree method for instantiating devices   Wolfram Sang
• [PATCH v2 0/2] i2c: sunxi: Change compatibles pattern   Wolfram Sang
• [PATCH v2 2/2] ARM: sunxi: dt: Convert to the new i2c compatibles   Wolfram Sang
• [PATCH] i2c: mv64xxx: Fix locked bus when offload is selected but not used on a message   Wolfram Sang
• [PATCH 0/5] mv64xxx updates   Wolfram Sang
• [PATCH 1/5] i2c: mv64xxx: put offload check into offload prepare function   Wolfram Sang
• [PATCH 2/5] i2c: mv64xxx: refactor message start to ensure proper initialization   Wolfram Sang
• [PATCH 3/5] i2c: mv64xxx: refactor send_start   Wolfram Sang
• [PATCH 4/5] i2c: mv64xxx: directly call send_start when initializing transfer   Wolfram Sang
• [PATCH 5/5] i2c: mv64xxx: refactor initialization for new msgs   Wolfram Sang
• [PATCH v2 2/2] ARM: sunxi: dt: Convert to the new i2c compatibles   Wolfram Sang
• [PATCH 2/5] i2c: mv64xxx: refactor message start to ensure proper initialization   Wolfram Sang
• [PATCH 01/17] Documentation: i2c: describe devicetree method for instantiating devices   Wolfram Sang
• [PATCH V2 11/17] i2c: nomadik: Convert to devm functions   Wolfram Sang
• [PATCH 0/5] enable i2c on koelsch-dt (and cleanup lager)   Wolfram Sang
• [PATCH 1/5] ARM: shmobile: r8a7791: remove superfluous interrupt-parents   Wolfram Sang
• [PATCH 2/5] ARM: shmobile: r8a7791: add i2c master nodes to dtsi   Wolfram Sang
• [PATCH 3/5] ARM: shmobile: r8a7791: add i2c2 bus to koelsch dt   Wolfram Sang
• [PATCH 4/5] ARM: shmobile: r8a7790: remove superfluous interrupt-parents   Wolfram Sang
• [PATCH 5/5] ARM: shmobile: r8a7790: add i2c aliases to dtsi   Wolfram Sang
• [PATCH V2 11/17] i2c: nomadik: Convert to devm functions   Wolfram Sang
• [PATCH 2/5] ARM: shmobile: r8a7791: add i2c master nodes to dtsi   Wolfram Sang
• [PATCH 2/5] ARM: shmobile: r8a7791: add i2c master nodes to dtsi   Wolfram Sang
• [PATCH 2/5] ARM: shmobile: r8a7791: add i2c master nodes to dtsi   Wolfram Sang
• [PATCH 2/5] ARM: shmobile: r8a7791: add i2c master nodes to dtsi   Wolfram Sang
• [PATCH 2/5] ARM: shmobile: r8a7791: add i2c master nodes to dtsi   Wolfram Sang
• [PATCH 2/5] ARM: shmobile: r8a7791: add i2c master nodes to dtsi   Wolfram Sang
• [PATCH V2 1/2] ARM: shmobile: r8a7791: add i2c master nodes to dtsi   Wolfram Sang
• [PATCH V2 2/2] ARM: shmobile: r8a7791: add i2c2 bus to koelsch dt   Wolfram Sang
• [PATCH v2 0/5] ARM: sun6i: Add support for the A31 I2C controller   Wolfram Sang
• [PATCH v2 0/5] ARM: sun6i: Add support for the A31 I2C controller   Wolfram Sang
• [PATCH V3 11/17] i2c: nomadik: Convert to devm functions   Wolfram Sang
• [PATCH V3 11/17] i2c: nomadik: Convert to devm functions   Wolfram Sang
• [PATCH V3 16/17] i2c: nomadik: Remove busy check for transfers at suspend late   Wolfram Sang
• [PATCH V4 16/17] i2c: nomadik: Remove busy check for transfers at suspend late   Wolfram Sang
• [PATCH] i2c: nomadik: Silence compiler warning   Wolfram Sang
• [PATCH] clk: shmobile: div6: use proper description in kernel doc   Wolfram Sang
• ccf: where to put constraints?   Wolfram Sang
• [PATCH 01/03] ARM: shmobile: Introduce shmobile_clk_workaround()   Wolfram Sang
• [PATCH 0/4] CCF support for Renesas r7s72100   Wolfram Sang
• [PATCH 1/4] ARM: r7s72100: add clock nodes to dtsi   Wolfram Sang
• [PATCH 2/4] ARM: r7s72100: genmai: populate extal clock node   Wolfram Sang
• [PATCH 3/4] clk: shmobile: add CPG driver for rz-platforms   Wolfram Sang
• [PATCH 4/4] ARM: shmobile: r7s72100: use workaround for non DT-clocks   Wolfram Sang
• ccf: where to put constraints?   Wolfram Sang
• [PATCH] drivers: net: cpsw: fix buggy loop condition   Heiko Schocher
• [PATCH] gpu:drm:tilcdc: backlight node never found   Heiko Schocher
• [PATCH v3 3/6] misc: fuse: Add efuse driver for Tegra   Peter De Schrijver
• [PATCH v3 3/6] misc: fuse: Add efuse driver for Tegra   Peter De Schrijver
• [PATCH] clk: tegra124: remove gr2d and gr3d clocks   Peter De Schrijver
• [PATCH] clk: tegra: Fix vic03 mux index   Peter De Schrijver
• Tegra clockframework fixes for 3.14   Peter De Schrijver
• Tegra clockframework fixes for 3.14   Peter De Schrijver
• Tegra clockframework fixes for 3.14   Peter De Schrijver
• Tegra clockframework fixes for 3.14   Peter De Schrijver
• pci-mvebu driver on km_kirkwood   Gavin Shan
• [PATCH 0/9] Samsung clock PM consolidation part 1   Rahul Sharma
• [PATCH V2 2/3] ARM: dts: add dts files for exynos5260 SoC   Rahul Sharma
• [PATCH V2 2/3] ARM: dts: add dts files for exynos5260 SoC   Rahul Sharma
• [PATCH V2 2/3] ARM: dts: add dts files for exynos5260 SoC   Rahul Sharma
• [PATCH v3 0/3] exynos: arch: add support for exynos5260 SoC   Rahul Sharma
• [PATCH v3 1/3] ARM: EXYNOS: initial board support for exynos5260 SoC   Rahul Sharma
• [PATCH v3 2/3] ARM: dts: add dts files for exynos5260 SoC   Rahul Sharma
• [PATCH v3 3/3] ARM: dts: add dts files for xyref5260 board   Rahul Sharma
• [PATCH v3 3/3] ARM: dts: add dts files for xyref5260 board   Rahul Sharma
• [PATCH v4 0/3] exynos: arch: add support for exynos5260 SoC   Rahul Sharma
• [PATCH v4 1/3] ARM: EXYNOS: initial board support for exynos5260 SoC   Rahul Sharma
• [PATCH v4 2/3] ARM: dts: add dts files for exynos5260 SoC   Rahul Sharma
• [PATCH v4 3/3] ARM: dts: add dts files for xyref5260 board   Rahul Sharma
• [PATCH v3 0/5] clk: exynos: add support for exynos5260 SoC   Rahul Sharma
• [PATCH v3 1/5] clk/samsung: add support for multiple clock providers   Rahul Sharma
• [PATCH v3 2/5] clk/samsung: add support for pll2550xx   Rahul Sharma
• [PATCH v3 3/5] clk/samsung: add support for pll2650xx   Rahul Sharma
• [PATCH v3 4/5] clk/exynos5260: add macros and documentation for exynos5260   Rahul Sharma
• [PATCH v3 5/5] clk/exynos5260: add clock file for exynos5260   Rahul Sharma
• [BUG] FL1009: xHCI host not responding to stop endpoint command.   Sarah Sharp
• [PATCH v3 0/2] ASoC: atmel_ssc_dai: add option to choose clock   Bo Shen
• [PATCH v3 1/2] ASoC: atmel_ssc_dai: make option to choose clock   Bo Shen
• [PATCH v3 2/2] Binding: atmel-ssc: add option to choose clock   Bo Shen
• [PATCH 2/2] USB: at91: using USBA_NR_DMAS for DMA channels   Bo Shen
• [PATCH 2/2] USB: at91: using USBA_NR_DMAS for DMA channels   Bo Shen
• [PATCH v2 1/2] USB: at91: fix the number of endpoint parameter   Bo Shen
• [PATCH v2 2/2] USB: at91: using USBA_NR_DMAS for DMA channels   Bo Shen
• [PATCH v2 4/5] DMA: sun6i: Add driver for the Allwinner A31 DMA controller   Shevchenko, Andriy
• [PATCH 4/5] DMA: sun6i: Add driver for the Allwinner A31 DMA controller   Andy Shevchenko
• [PATCH 4/5] DMA: sun6i: Add driver for the Allwinner A31 DMA controller   Andy Shevchenko
• about last level cache on big little cpu   Alex Shi
• a LLC sched domain bug for panda board?   Alex Shi
• a LLC sched domain bug for panda board?   Alex Shi
• [PATCH 0/3] mtd: gpmi: add subpage read support   Huang Shijie
• [PATCH v5 0/8] mtd: spi-nor: add a new framework for SPI NOR   Huang Shijie
• [PATCH v5 1/8] mtd: spi-nor: copy the SPI NOR commands to a new header file   Huang Shijie
• [PATCH v5 2/8] mtd: spi-nor: add the basic data structures   Huang Shijie
• [PATCH v5 3/8] mtd: spi-nor: add the framework for SPI NOR   Huang Shijie
• [PATCH v5 4/8] Documentation: add the document for the SPI NOR framework   Huang Shijie
• [PATCH v5 5/8] mtd: m25p80: use the SPI nor framework   Huang Shijie
• [PATCH v5 6/8] mtd: spi-nor: add a helper to find the spi_device_id   Huang Shijie
• [PATCH v5 7/8] Documentation: add the binding file for Freescale QuadSPI driver   Huang Shijie
• [PATCH v5 8/8] mtd: spi-nor: Add Freescale QuadSPI driver   Huang Shijie
• [PATCH v5 4/8] Documentation: add the document for the SPI NOR framework   Huang Shijie
• [PATCH v5 5/8 fix] mtd: m25p80: use the SPI nor framework   Huang Shijie
• [PATCH v5 4/8 fix] Documentation: add the document for the SPI NOR framework   Huang Shijie
• change kmalloc into vmalloc for large memory allocations   Huang Shijie
• [PATCH] ARM: mm: Fix the memblock allocation for LPAE machines   Santosh Shilimkar
• [RFC/RFT 0/2] ARM: mm: Introduce arch hooks for dma address translation   Santosh Shilimkar
• [RFC/RFT 2/2] ARM: keystone: Install hooks for dma address translation routines   Santosh Shilimkar
• [RFC/RFT 1/2] ARM: mm: introduce arch hooks for dma address translation routines   Santosh Shilimkar
• [RFC/RFT 1/2] ARM: mm: introduce arch hooks for dma address translation routines   Santosh Shilimkar
• [PATCH v4 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Santosh Shilimkar
• [RFC/RFT 1/2] ARM: mm: introduce arch hooks for dma address translation routines   Santosh Shilimkar
• [PATCHv2 2/2] arm: Get rid of meminfo   Santosh Shilimkar
• [PATCH] ARM: mm: Fix the memblock allocation for LPAE machines   Santosh Shilimkar
• [PATCH] ARM: mm: Fix the memblock allocation for LPAE machines   Santosh Shilimkar
• [PATCH] ARM: mm: Fix the memblock allocation for LPAE machines   Santosh Shilimkar
• [PATCH v6 0/3] Introduce clocksource driver for Keystone platform   Santosh Shilimkar
• [PATCH v3 0/4] ARM: keystone: enable gpio support   Santosh Shilimkar
• [PATCH v4 2/2] memory: ti-aemif: add bindings for AEMIF driver   Santosh Shilimkar
• [PATCH 0/2] clk: keystone: Couple of fixes for 3.14-rcx   Santosh Shilimkar
• [PATCH 1/2] clk: keystone: gate: fix clk_init_data initialization   Santosh Shilimkar
• [PATCH 2/2] ARM: keystone: dts: fix clkvcp3 control register address   Santosh Shilimkar
• [PATCH] Fix uses of dma_max_pfn() when converting to a limiting address   Santosh Shilimkar
• [PATCH 0/2] clk: keystone: Couple of fixes for 3.14-rcx   Santosh Shilimkar
• [PATCH v4 0/2] Introduce AEMIF driver for Davinci/Keystone archs   Santosh Shilimkar
• [linux-next] Adding keystone kernel tree   Santosh Shilimkar
• [PATCH v4 0/2] Introduce AEMIF driver for Davinci/Keystone archs   Santosh Shilimkar
• [PATCH v5 2/2] memory: ti-aemif: add bindings for AEMIF driver   Santosh Shilimkar
• [PATCH 0/2] clk: keystone: Couple of fixes for 3.14-rcx   Santosh Shilimkar
• [RESEND][PATCH v4] gpio: davinci: reuse for keystone soc   Santosh Shilimkar
• [PATCH 0/4] ARM: mm: Use dma-ranges for dma address translation   Santosh Shilimkar
• [PATCH 1/4] ARM: mm: Introduce archdata.dma_pfn_offset   Santosh Shilimkar
• [PATCH 2/4] ARM: mm: Remove unsed dma_to_virt()   Santosh Shilimkar
• [PATCH 3/4] ARM: dts: keystone: Use dma-ranges property   Santosh Shilimkar
• [PATCH 4/4] ARM: keystone: Use dma-ranges for dma_pfn_offset configuration   Santosh Shilimkar
• [PATCH] ARM: dts: keystone: add AEMIF/NAND device entry   Santosh Shilimkar
• [PATCH 4/4] ARM: keystone: Use dma-ranges for dma_pfn_offset configuration   Santosh Shilimkar
• [PATCH 0/4] ARM: dts: keystone: Add support for K2H and K2E SOCs/EVMs   Santosh Shilimkar
• [PATCH 1/4] ARM: dts: keystone: update for supporting K2L/K2E EVMs   Santosh Shilimkar
• [PATCH 2/4] ARM: dts: keystone: preparatory patch to support K2L and K2E SOCs   Santosh Shilimkar
• [PATCH 3/4] ARM: dts: keystone: add support for K2 Lamarr SoC and EVM   Santosh Shilimkar
• [PATCH 4/4] ARM: dts: keystone: add support for k2 Edison SoC and EVM   Santosh Shilimkar
• [PATCH v2 0/7] ARM: dma: Support dma-ranges and dma-coherent   Santosh Shilimkar
• [PATCH v2 1/7] ARM: mm: Introduce archdata.dma_pfn_offset   Santosh Shilimkar
• [PATCH v2 2/7] ARM: mm: Remove unsed dma_to_virt()   Santosh Shilimkar
• [PATCH v2 3/7] dma: of: introduce of_dma_get_range() helper   Santosh Shilimkar
• [PATCH v2 4/7] dma: of: introduce of_dma_is_coherent() helper   Santosh Shilimkar
• [PATCH v2 5/7] ARM: of: introduce common routine for DMA configuration   Santosh Shilimkar
• [PATCH v2 6/7] ARM: dts: keystone: Use dma-ranges property   Santosh Shilimkar
• [PATCH v2 7/7] ARM: dts: keystone: Udate USB node for dma properties   Santosh Shilimkar
• [PATCH] dma: of: Move the functions under CONFIG_OF_DMA instead of CONFIG_OF   Santosh Shilimkar
• [PATCH] dma: of: Move the functions under CONFIG_OF_DMA instead of CONFIG_OF   Santosh Shilimkar
• [PATCH v2 4/7] dma: of: introduce of_dma_is_coherent() helper   Santosh Shilimkar
• [PATCH] dma: of: Move the functions under CONFIG_OF_DMA instead of CONFIG_OF   Santosh Shilimkar
• [PATCH] dma: of: Move the functions under CONFIG_OF_DMA instead of CONFIG_OF   Santosh Shilimkar
• [PATCH v2 5/7] ARM: of: introduce common routine for DMA configuration   Santosh Shilimkar
• [PATCH v2 4/7] dma: of: introduce of_dma_is_coherent() helper   Santosh Shilimkar
• [PATCH] dma: of: Move the functions under CONFIG_OF_DMA instead of CONFIG_OF   Santosh Shilimkar
• [PATCH v2 5/7] ARM: of: introduce common routine for DMA configuration   Santosh Shilimkar
• [PATCH v6 0/2] Introduce AEMIF driver for Davinci/Keystone archs   Santosh Shilimkar
• [PATCH v6 0/2] Introduce AEMIF driver for Davinci/Keystone archs   Santosh Shilimkar
• [PATCH] dma: Add Keystone Packet DMA Engine driver   Santosh Shilimkar
• [PATCH 0/3] soc: Introduce drivers/soc and add Keystone QMSS driver   Santosh Shilimkar
• [PATCH 1/3] soc: Introduce drivers/soc place-holder for SOC specific drivers   Santosh Shilimkar
• [PATCH 2/3] soc: keystone: add QMSS driver   Santosh Shilimkar
• [PATCH 3/3] firmware: add Keystone QMSS PDSP accumulator firmware blob   Santosh Shilimkar
• [PATCH] dma: Add Keystone Packet DMA Engine driver   Santosh Shilimkar
• [PATCH v2 RESEND 1/3] ARM: clps711x: Add CLPS711X irqchip driver   Alexander Shiyan
• [PATCH v2 RESEND 2/3] ARM: dts: clps711x: Add bindings documentation for CLPS711X irqchip driver   Alexander Shiyan
• [PATCH v2 RESEND 3/3] ARM: clps711x: Migrate CLPS711X subarch to the new irqchip driver   Alexander Shiyan
• [PATCH v2 RESEND 0/3] ARM: clps711x: IRQCHIP driver   Alexander Shiyan
• [PATCH 1/3] ARM: dts: imx27-phytec-phycard-s-som: Sort entries   Alexander Shiyan
• [PATCH 2/3] ARM: dts: imx27-phytec-phycard-s-som: Add NFC node   Alexander Shiyan
• [PATCH 3/3] ARM: dts: imx27-phytec-phycard-s-rdk: Add pinctrl definitions for SDHC2   Alexander Shiyan
• Re: [PATCH 5/8] tty/serial: at91: add dtr control via gpio   Alexander Shiyan
• Re: [PATCH 12/28] Remove GENERIC_TIME   Alexander Shiyan
• Re: [PATCH] ARM: dts: i.MX51 babbage: Support diagnostic LED   Alexander Shiyan
• Re: [PATCH] video: imxfb: Use regulator API with LCD class for powering   Alexander Shiyan
• Re: [PATCH v3 1/2] spi:fsl-dspi:convert to use regmap and big-endian supports   Alexander Shiyan
• Re: [PATCH] video: imxfb: Use regulator API with LCD class for powering   Alexander Shiyan
• Re: [PATCH v2 1/4] tty/serial: Add GPIOLIB helpers for controlling modem lines   Alexander Shiyan
• [PATCH] ARM: dts: imx27-phytec-phycard-s-som: Rename file to .dtsi   Alexander Shiyan
• Re: [PATCH 07/12] mfd: syscon: Consider platform data a regmap config name   Alexander Shiyan
• Re: [PATCH 07/12] mfd: syscon: Consider platform data a regmap config name   Alexander Shiyan
• [PATCH 1/4] ARM: clps711x: autcpu12: Fix incorrect NAND CLE GPIO   Alexander Shiyan
• [PATCH 2/4] ARM: clps711x: Remove EP72XX_ROM_BOOT option   Alexander Shiyan
• [PATCH 3/4] ARM: clps711x: Update defconfig   Alexander Shiyan
• [PATCH 4/4] MAINTAINERS: ARM: clps711x: Use regex patterns to involve all CLPS711X drivers   Alexander Shiyan
• [PATCH] ARM: dts: imx27-phytec-phycore-*: Add diagnostic PMIC LEDs   Alexander Shiyan
• [PATCH] ARM: common/scoop.c: Remove redundant code   Alexander Shiyan
• [PATCH] clk: at91: Fix memory leak   Alexander Shiyan
• Re: [PATCH v3] bus: imx-weim: support CS GPR config for imx6q-weim   Alexander Shiyan
• Re: [PATCH v4] bus: imx-weim: support CS GPR configuration   Alexander Shiyan
• Re: [PATCH] arm: imx: remove MACH_MXLADS   Alexander Shiyan
• Re: [PATCH] arm: imx: remove MACH_MXLADS   Alexander Shiyan
• Re: [PATCH] arm: imx: remove MACH_MXLADS   Alexander Shiyan
• Re: [PATCH] ARM: dts: imx27-phytec-phycore-*: Add diagnostic PMIC LEDs   Alexander Shiyan
• Re: [PATCH] arm: imx: remove MACH_MXLADS   Alexander Shiyan
• Re: [PATCH v3 0/7] tty/serial: Add helpers to use GPIOs to control modem lines and implement atmel_serial.c   Alexander Shiyan
• Re: [PATCH v3 1/7] tty/serial: Add GPIOLIB helpers for controlling modem lines   Alexander Shiyan
• [PATCH v2 RESEND 1/3] ARM: clps711x: Add CLPS711X irqchip driver   Alexander Shiyan
• [PATCH v3 4/7] tty/serial: at91: use mctrl_gpio helpers   Alexander Shiyan
• [PATCH v3 1/7] tty/serial: Add GPIOLIB helpers for controlling modem lines   Alexander Shiyan
• [PATCH 1/4] ARM: clps711x: autcpu12: Fix incorrect NAND CLE GPIO   Alexander Shiyan
• Re: PMIC driver prevents gpio-leds to work   Alexander Shiyan
• Re: [RFC PATCH v2 1/2] mfd: syscon: Support early initialization   Alexander Shiyan
• Re: [RFC PATCH v2 1/2] mfd: syscon: Support early initialization   Alexander Shiyan
• Re: [Patch v3 20/23] ARM: config: Add a multi_v5_defconfig   Alexander Shiyan
• Re: [Patch v3 20/23] ARM: config: Add a multi_v5_defconfig   Alexander Shiyan
• Re: [Patch v3 20/23] ARM: config: Add a multi_v5_defconfig   Alexander Shiyan
• [PATCH 1/3] ARM: dts: i.MX27: Add USB nodes   Alexander Shiyan
• [PATCH 2/3] ARM: dts: imx27-phytec-phycore-rdk: Add USBH2 node   Alexander Shiyan
• [PATCH 3/3] ARM: dts: imx27-phytec-phycore-som: Add USBOTG node   Alexander Shiyan
• [PATCH v2 RESEND 0/3] ARM: clps711x: IRQCHIP driver   Alexander Shiyan
• Re: [PATCHv6][ 3/5] video: mx3fb: Introduce regulator support.   Alexander Shiyan
• Re: [PATCH v4 1/5] tty/serial: Add GPIOLIB helpers for controlling modem lines   Alexander Shiyan
• Re: [PATCH 2/3] ARM/leds: move ARM Versatile LED driver to leds subsystem   Alexander Shiyan
• Re: [PATCH v2 RESEND 1/3] ARM: clps711x: Add CLPS711X irqchip driver   Alexander Shiyan
• Re: [PATCH 1/4] ARM: clps711x: autcpu12: Fix incorrect NAND CLE GPIO   Alexander Shiyan
• [PATCH v3 3/5] ASoC: tda998x: add DT documentation of the tda998x CODEC   Sergei Shtylyov
• [PATCH 0/2] Add Ether's PHY IRQ support for R8A7790/Lager board   Sergei Shtylyov
• [PATCH 0/2] Add Ether's PHY IRQ support for Lager/Koelsh boards   Sergei Shtylyov
• [PATCH v2 1/2] ARM: shmobile: Lager: pass Ether PHY IRQ   Sergei Shtylyov
• [PATCH v2 2/2] ARM: shmobile: Koelsch: pass Ether PHY IRQ   Sergei Shtylyov
• [PATCH 0/2] Add Ether's PHY IRQ support for Lager/Koelsh boards   Sergei Shtylyov
• [PATCH 1/3] arm: dts: am33xx.dtsi: Add node name to rtc device node   Sergei Shtylyov
• [PATCH v3 0/6] IIO pulse capture support for TI ECAP   Sergei Shtylyov
• [PATCH 0/2] Add Ether's PHY IRQ support for Lager/Koelsh boards   Sergei Shtylyov
• [PATCH 0/2] Add Ether DT support for R8A7790/Lager reference board   Sergei Shtylyov
• [PATCH 1/2] ARM: shmobile: r8a7790: add Ether DT support   Sergei Shtylyov
• [PATCH 2/2] ARM: shmobile: lager: add Ether DT support   Sergei Shtylyov
• [PATCH 0/2] Add Ether DT support for R8A7791/Koelsch reference board   Sergei Shtylyov
• [PATCH 1/2] ARM: shmobile: r8a7791: add Ether DT support   Sergei Shtylyov
• [PATCH 2/2] ARM: shmobile: koelsch: add Ether DT support   Sergei Shtylyov
• [PATCH 1/2] ARM: shmobile: r8a7791: add Ether DT support   Sergei Shtylyov
• [PATCH] ARM: shmobile: set proper DMA masks for Ether devices   Sergei Shtylyov
• [PATCH] ARM: shmobile: set proper DMA masks for Ether devices   Sergei Shtylyov
• [PATCH] ARM: shmobile: set proper DMA masks for Ether devices   Sergei Shtylyov
• [PATCH 26/27] ARM: shmobile: lager-reference: Enable CMT0 in device tree   Sergei Shtylyov
• [PATCH 27/27] ARM: shmobile: koelsch-reference: Enable CMT0 in device tree   Sergei Shtylyov
• [PATCH] ARM: shmobile: lager: Add internal USB PCI support   Sergei Shtylyov
• [PATCH 26/27] ARM: shmobile: lager-reference: Enable CMT0 in device tree   Sergei Shtylyov
• [PATCH 26/27] ARM: shmobile: lager-reference: Enable CMT0 in device tree   Sergei Shtylyov
• [PATCH 26/27] ARM: shmobile: lager-reference: Enable CMT0 in device tree   Sergei Shtylyov
• [PATCH] ARM: shmobile: lager: Add internal USB PCI support   Sergei Shtylyov
• [PATCH 0/5] Set Ether device's DMA masks on SH-Mobile boards   Sergei Shtylyov
• [PATCH 1/5] ARM: shmobile: Armadillo 800 EVA: set proper DMA masks for Ether device   Sergei Shtylyov
• [PATCH 2/5] ARM: shmobile: BOCK-W: set proper DMA masks for Ether device   Sergei Shtylyov
• [PATCH 3/5] ARM: shmobile: Lager: set proper DMA masks for Ether device   Sergei Shtylyov
• [PATCH 4/5] ARM: shmobile: Koelsch: set proper DMA masks for Ether device   Sergei Shtylyov
• [PATCH 5/5] ARM: shmobile: Genmai: set proper DMA masks for Ether device   Sergei Shtylyov
• [PATCH 0/2] Add Ether DT support for R8A7790/Lager reference board   Sergei Shtylyov
• [PATCH v2 0/2] Add Ether DT support for R8A7790/Lager reference board   Sergei Shtylyov
• [PATCH v2 1/2] ARM: shmobile: r8a7790: add Ether DT support   Sergei Shtylyov
• [PATCH v2 2/2] ARM: shmobile: lager: add Ether DT support   Sergei Shtylyov
• [PATCH v2 0/2] Add Ether DT support for R8A7791/Koelsch reference board   Sergei Shtylyov
• [PATCH v2 1/2] ARM: shmobile: r8a7791: add Ether DT support   Sergei Shtylyov
• [PATCH v2 2/2] ARM: shmobile: koelsch: add Ether DT support   Sergei Shtylyov
• [PATCH 3/5] documentation/iommu: update description of ARM System MMU binding   Sergei Shtylyov
• [PATCH 1/4] ARM: Kirkwood: Add audio node to kirkwood.dtsi   Sergei Shtylyov
• [PATCH v11 09/15] usb: phy: Add set_wakeup API   Sergei Shtylyov
• [PATCHv2 4/5] net: rfkill: gpio: add ACPI ID for GPS module on Lenove Miix2   Sergei Shtylyov
• [PATCH v3 07/20] ARM: shmobile: marzen: Reference clocks   Sergei Shtylyov
• [PATCH 0/5] ARM: davinci: tnetv107x removal   Sergei Shtylyov
• [PATCH] mm: disable split page table lock for !MMU   Kirill A. Shutemov
• [PATCH] ARM: unistd.h: relocate comments back to place   Baruch Siach
• [PATCH] rtc: mv: reset date if after year 2038   Baruch Siach
• [PATCH v5 04/10] V4L: Add driver for s5k6a3 image sensor   Baruch Siach
• [PATCH v5 04/10] V4L: Add driver for s5k6a3 image sensor   Baruch Siach
• [PATCH] arm: socfpga: reserve the region at start of phys mem   Sebastian Andrzej Siewior
• [PATCH resend] ARM: dts: imx6qdl-wandboard: use GPIO_6 for FEC interrupt   Sascha Silbe
• [PATCH 07/10] watchdog: xilinx: Fix OF binding   Michal Simek
• [PATCH 07/10] watchdog: xilinx: Fix OF binding   Michal Simek
• [PATCH] ARM: zynq: Reserve not DMAable space in front of the kernel   Michal Simek
• [PATCH 09/10] watchdog: xilinx: Add missing binding   Michal Simek
• [PATCH 09/10] watchdog: xilinx: Add missing binding   Michal Simek
• [PATCH 09/10] watchdog: xilinx: Add missing binding   Michal Simek
• [PATCH 09/10] watchdog: xilinx: Add missing binding   Michal Simek
• [PATCH] ARM: zynq: Move of_clk_init from clock driver   Michal Simek
• [PATCH] ARM: zynq: Move of_clk_init from clock driver   Michal Simek
• [PATCH 01/10] watchdog: xilinx: Convert driver to the watchdog framework   Michal Simek
• [PATCH] ARM: zynq: Add support for SOC_BUS   Michal Simek
• [PATCH] ARM: zynq: Add waituart implementation   Michal Simek
• [GIT PULL] Xilinx Zynq fix for v3.14   Michal Simek
• [RFC PATCH 0/3] Syscon early initialization   Michal Simek
• [RFC PATCH 1/3] regmap: Separate regmap dev initialization   Michal Simek
• [RFC PATCH 2/3] mfd: syscon: Support early initialization   Michal Simek
• [RFC PATCH 3/3] ARM: zynq: Use early syscon initialization   Michal Simek
• [RFC PATCH 2/3] mfd: syscon: Support early initialization   Michal Simek
• [PATCH] video: xilinxfb: Move xilinxfb_platform_data directly to the driver   Michal Simek
• [PATCH v2 01/11] watchdog: xilinx: Convert driver to the watchdog framework   Michal Simek
• [PATCH v2 02/11] watchdog: xilinx: Move control_status_reg to functions   Michal Simek
• [PATCH v2 03/11] watchdog: xilinx: Simplify probe and remove functions   Michal Simek
• [PATCH v2 04/11] watchdog: xilinx: Move no_timeout to probe function   Michal Simek
• [PATCH v2 05/11] watchdog: xilinx: Allocate private structure per device   Michal Simek
• [PATCH v2 06/11] watchdog: xilinx: Fix all printk messages   Michal Simek
• [PATCH v2 07/11] watchdog: xilinx: Use of_property_read_u32   Michal Simek
• [PATCH v2 08/11] watchdog: xilinx: Use correct comment indentation   Michal Simek
• [PATCH v2 09/11] watchdog: xilinx: Add missing binding   Michal Simek
• [PATCH v2 11/11] watchdog: xilinx: Remove no_timeout variable   Michal Simek
• [PATCH] can: xilinx CAN controller support.   Michal Simek
• [PATCH] can: xilinx CAN controller support.   Michal Simek
• [PATCH v2 07/11] watchdog: xilinx: Use of_property_read_u32   Michal Simek
• [RFC PATCH 2/3] mfd: syscon: Support early initialization   Michal Simek
• [PATCH v3 0/11] Xilinx watchdog changes   Michal Simek
• [PATCH v3 01/11] watchdog: xilinx: Convert driver to the watchdog framework   Michal Simek
• [PATCH v3 02/11] watchdog: xilinx: Move control_status_reg to functions   Michal Simek
• [PATCH v3 03/11] watchdog: xilinx: Simplify probe and remove functions   Michal Simek
• [PATCH v3 04/11] watchdog: xilinx: Move no_timeout to probe function   Michal Simek
• [PATCH v3 05/11] watchdog: xilinx: Allocate private structure per device   Michal Simek
• [PATCH v3 06/11] watchdog: xilinx: Fix all printk messages   Michal Simek
• [PATCH v3 07/11] watchdog: xilinx: Use of_property_read_u32   Michal Simek
• [PATCH v3 08/11] watchdog: xilinx: Use correct comment indentation   Michal Simek
• [PATCH v3 09/11] watchdog: xilinx: Add missing binding   Michal Simek
• [PATCH v3 10/11] watchdog: xilinx: Enable this driver for Zynq   Michal Simek
• [PATCH v3 11/11] watchdog: xilinx: Remove no_timeout variable   Michal Simek
• [PATCH 0/14] Xilinx axi ethernet patches   Michal Simek
• [PATCH 01/14] net: axienet: Fix compilation error   Michal Simek
• [PATCH 02/14] net: axienet: Fix compilation warnings   Michal Simek
• [PATCH 03/14] net: axienet: Support for RGMII   Michal Simek
• [PATCH 04/14] net: axienet: Handle 0 packet receive gracefully   Michal Simek
• [PATCH 05/14] net: axienet: Service completion interrupts ASAP   Michal Simek
• [PATCH 06/14] net: axienet: Handle jumbo frames for lesser frame sizes   Michal Simek
• [PATCH 07/14] net: axienet: Support phy-less mode of operation   Michal Simek
• [PATCH 08/14] net: axienet: Removed checkpatch errors/warnings   Michal Simek
• [PATCH 09/14] net: axienet: Fix comments blocks   Michal Simek
• [PATCH 10/14] net: axienet: Use pdev instead of op   Michal Simek
• [PATCH 11/14] net: axienet: Use devm_* calls   Michal Simek
• [PATCH 12/14] net: axienet: Use of_property_* calls   Michal Simek
• [PATCH 13/14] net: axienet: Removed _of_ prefix in probe and remove functions   Michal Simek
• [PATCH 14/14] net: axienet: Fix kernel-doc warnings   Michal Simek
• [PATCH 0/14] Xilinx axi ethernet patches   Michal Simek
• [PATCH v2 0/2] Xilinx axi ethernet bug fixes   Michal Simek
• [PATCH v2 1/2] net: axienet: Fix compilation error   Michal Simek
• [PATCH v2 2/2] net: axienet: Fix compilation warnings   Michal Simek
• [PATCH 08/14] net: axienet: Removed checkpatch errors/warnings   Michal Simek
• [PATCH v2] can: xilinx CAN controller support.   Michal Simek
• [PATCH v2] can: xilinx CAN controller support.   Michal Simek
• [PATCH 08/14] net: axienet: Removed checkpatch errors/warnings   Michal Simek
• [PATCH] pcie: Add Xilinx PCIe Host Bridge IP driver   Michal Simek
• [RFC PATCH v2 0/2] Syscon early initialization   Michal Simek
• [RFC PATCH v2 1/2] mfd: syscon: Support early initialization   Michal Simek
• [RFC PATCH v2 2/2] ARM: zynq: Use early syscon initialization   Michal Simek
• [RFC PATCH v2 1/2] mfd: syscon: Support early initialization   Michal Simek
• [RFC PATCH v2 1/2] mfd: syscon: Support early initialization   Michal Simek
• [PATCH] clk: zynq: Use clk_readl/clk_writel helper function   Michal Simek
• [GIT PULL] Xilinx Zynq dt changes for v3.15   Michal Simek
• [GIT PULL] Xilinx Zynq changes for v3.15   Michal Simek
• [PATCH v3 07/11] watchdog: xilinx: Use of_property_read_u32   Michal Simek
• [PATCH v3 07/11] watchdog: xilinx: Use of_property_read_u32   Michal Simek
• [PATCH v4 0/4] ARM: zynq: cpufreq support   Michal Simek
• [GIT PULL] Xilinx Zynq changes for v3.15   Michal Simek
• [PATCH 3/3] spi: switch to devm_spi_alloc_master   Gerhard Sittig
• [PATCH] dt/bindings: update fsl-fec regarding compatible and clocks   Gerhard Sittig
• [PATCH] dt/bindings: update fsl-fec regarding compatible and clocks   Gerhard Sittig
• [PATCH] dt/bindings: update fsl-fec regarding compatible and clocks   Gerhard Sittig
• Stuck getting DTS working for a new kirkwood board   Gerhard Sittig
• [PATCH 1/3] fs_enet: update clock names to comply with FEC binding   Gerhard Sittig
• [PATCH 2/3] dts: mpc512x: adjust clock specs for FEC nodes   Gerhard Sittig
• [PATCH 3/3] dt/bindings: fsl-fec: add "per" to clock properties   Gerhard Sittig
• [PATCH] ARM: OMAP4: hwmod: Fix SOFTRESET logic for OMAP4   Illia Smyrnov
• [PATCH v2] pwm: add CSR SiRFSoC PWM driver   Barry Song
• [PATCH v2] pwm: add CSR SiRFSoC PWM driver   Barry Song
• [PATCH v3] pwm: add CSR SiRFSoC PWM driver   Barry Song
• [PATCH] input: sirfsoc-onkey - report onkey untouch event by detecting pin status   Barry Song
• [PATCH] pinctrl: sirf: update copyright years to 2014   Barry Song
• [PATCH] irqchip: sirf: update copyright years to 2014   Barry Song
• [PATCH] clk: sirf: update copyright years to 2014   Barry Song
• [PATCH] input: sirfsoc-onkey - report onkey untouch event by detecting pin status   Barry Song
• [PATCH] input: sirfsoc-onkey - report onkey untouch event by detecting pin status   Barry Song
• [PATCH v3] input: sirfsoc-onkey - report onkey untouch event by detecting pin status   Barry Song
• [PATCH v3] input: sirfsoc-onkey - report onkey untouch event by detecting pin status   Barry Song
• [PATCH v3] input: sirfsoc-onkey - report onkey untouch event by detecting pin status   Barry Song
• [PATCH v3] input: sirfsoc-onkey - report onkey untouch event by detecting pin status   Barry Song
• [PATCH 0/5] ARM: prima2: a couple of minor fixes   Barry Song
• [PATCH 1/5] ARM: prima2: l2x0: fix checkpatch issues   Barry Song
• [PATCH 2/5] ARM: prima2: platsmp: fix checkpatch issues   Barry Song
• [PATCH 3/5] ARM: prima2: common: fix checkpatch issues   Barry Song
• [PATCH 4/5] ARM: prima2: rtciobrg: fix the typo about license   Barry Song
• [PATCH 5/5] ARM: prima2: staticize sirfsoc_init_late function   Barry Song
• [PATCH v3] pwm: add CSR SiRFSoC PWM driver   Barry Song
• [PATCH v3] pwm: add CSR SiRFSoC PWM driver   Barry Song
• [PATCH v3] pwm: add CSR SiRFSoC PWM driver   Barry Song
• [PATCH v3] pwm: add CSR SiRFSoC PWM driver   Barry Song
• [PATCH v3] pwm: add CSR SiRFSoC PWM driver   Barry Song
• [PATCH v3] pwm: add CSR SiRFSoC PWM driver   Barry Song
• [PATCH v3] pwm: add CSR SiRFSoC PWM driver   Barry Song
• [PATCH v3] pwm: add CSR SiRFSoC PWM driver   Barry Song
• [PATCH v3] pwm: add CSR SiRFSoC PWM driver   Barry Song
• [PATCH v4] dmaengine: sirf: enable generic dt binding for dma channels   Barry Song
• [PATCH] ARM: tegra: add device tree for SHIELD   Arend van Spriel
• [PATCH] ARM: tegra: add device tree for SHIELD   Arend van Spriel
• [Xen-devel] [PATCH v9 0/5] xen/arm/arm64: CONFIG_PARAVIRT and stolen ticks accounting   Stefano Stabellini
• [PATCH v9 3/5] arm: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_ops   Stefano Stabellini
• [PATCH v9 4/5] arm64: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_ops   Stefano Stabellini
• [PATCH v4] arm: remove !CPU_V6 and !GENERIC_ATOMIC64 build dependencies for XEN   Stefano Stabellini
• [PATCH 2/2] arm/xen: Don't use xen DMA ops when the device is protected by an IOMMU   Stefano Stabellini
• [PATCH 2/2] arm/xen: Don't use xen DMA ops when the device is protected by an IOMMU   Stefano Stabellini
• [PATCH] ARM: XEN depends on having a MMU   Stefano Stabellini
• [PATCH] ARM: XEN depends on having a MMU   Stefano Stabellini
• [RFC] ARM VM System Sepcification   Stefano Stabellini
• [RFC] ARM VM System Sepcification   Stefano Stabellini
• [RFC] ARM VM System Sepcification   Stefano Stabellini
• [PATCH] ARM: imx6: fix !CONFIG_PM and !CONFIG_CPU_IDLE build   Lucas Stach
• [PATCH] ARM: imx6: fix !CONFIG_PM and !CONFIG_CPU_IDLE build   Lucas Stach
• [PATCH] ARM: imx6: fix !CONFIG_PM and !CONFIG_CPU_IDLE build   Lucas Stach
• [PATCH 0/2] PCI: imx6: MSI support   Lucas Stach
• [PATCH 1/2] ARM: dts: imx6: adjust the interrupt list in order to support MSI   Lucas Stach
• [PATCH 2/2] PCI: imx6: add support for MSI   Lucas Stach
• [PATCH v2 1/2] ARM: dts: imx6: adjust the interrupt list in order to support MSI   Lucas Stach
• [PATCH v2 2/2] PCI: imx6: add support for MSI   Lucas Stach
• [PATCH v2 1/2] ARM: dts: imx6: adjust the interrupt list in order to support MSI   Lucas Stach
• [PATCH v3 1/3] PCI: designware: split samsung and fsl bindings   Lucas Stach
• [PATCH v3 2/3] ARM: dts: imx6: extend PCIe interrupt list for MSI   Lucas Stach
• [PATCH v3 3/3] PCI: imx6: add support for MSI   Lucas Stach
• [PATCH v3 2/3] ARM: dts: imx6: extend PCIe interrupt list for MSI   Lucas Stach
• [PATCH 1/3] PCI: designware: add legacy PCI interrupt mapping   Lucas Stach
• [PATCH 1/3] PCI: designware: add legacy PCI interrupt mapping   Lucas Stach
• [PATCH 1/3] PCI: designware: add legacy PCI interrupt mapping   Lucas Stach
• [RFC PATCH 0/3] PCI: imx6: fixup for add-in card IRQ mismapping   Lucas Stach
• [PATCH 0/7] PCI irq mapping fixes and cleanups   Lucas Stach
• [PATCH 1/7] ARM: dts: tegra: add PCIe interrupt mapping properties   Lucas Stach
• [PATCH 2/7] PCI: tegra: use new OF interrupt mapping when possible   Lucas Stach
• [PATCH 3/7] PCI: rcar: use new OF interrupt mapping when possible   Lucas Stach
• [PATCH 4/7] ARM: dts: exynos5440: fix PCIe interrupt mapping   Lucas Stach
• [PATCH 5/7] ARM: dts: imx6: add PCIe interrupt mapping properties   Lucas Stach
• [PATCH 6/7] PCI: designware: use new OF interrupt mapping when possible   Lucas Stach
• [PATCH 7/7] PCI: designware: split samsung and fsl bindings   Lucas Stach
• [PATCH 0/3] i.MX6 MSI support   Lucas Stach
• [PATCH 1/3] ARM: dts: imx6: extend PCIe interrupt list for MSI   Lucas Stach
• [PATCH 2/3] PCI: designware: make MSI isr shared irq aware   Lucas Stach
• [PATCH 3/3] PCI: imx6: add support for MSI   Lucas Stach
• [PATCH] arm: dts: vf610-twr: Add support for sdhc1   Stoica Cosmin Stefan
• [PATCH 1/6] i2c: bcm-kona: register with subsys_initcall   Alan Stern
• ohci-/ehci-platform: Change compatible string to ?hci-platform   Alan Stern
• [PATCH v2 1/2] ohci-platform: Change compatible string from usb-ohci to generic-ohci   Alan Stern
• [PATCH 1/2] uhci-platform: Change compatible string from platform-uhci to generic-uhci   Alan Stern
• [PATCH V2 1/8] PM / Runtime: Fetch runtime PM callbacks using a macro   Alan Stern
• [PATCH V2 1/8] PM / Runtime: Fetch runtime PM callbacks using a macro   Alan Stern
• [PATCH V2 1/8] PM / Runtime: Fetch runtime PM callbacks using a macro   Alan Stern
• [PATCH 2/7] ARM: lpc32xx: don't select HAVE_PWM   Roland Stigge
• [PATCH RESEND] ARM: LPC32xx: common.c: Remove unnecessary header inclusion   Roland Stigge
• [PATCH v4] gpio: davinci: reuse for keystone soc   Grygorii Strashko
• [PATCH] ARM: OMAP4: hwmod: Fix SOFTRESET logic for OMAP4   Grygorii Strashko
• [PATCH v3 0/4] ARM: keystone: enable gpio support   Grygorii Strashko
• [PATCH v3 1/4] ARM: dts: keystone: add gpio device entry   Grygorii Strashko
• [PATCH v3 2/4] ARM: dts: keystone-evm: add leds supports   Grygorii Strashko
• [PATCH v3 3/4] ARM: keystone_defconfig: enable gpio support   Grygorii Strashko
• [PATCH v3 4/4] ARM: keystone_defconfig: enable led support   Grygorii Strashko
• [PATCHv3 2/2] arm: Get rid of meminfo   Grygorii Strashko
• [PATCH v4] gpio: davinci: reuse for keystone soc   Grygorii Strashko
• [RESEND][PATCH v4] gpio: davinci: reuse for keystone soc   Grygorii Strashko
• [PATCH v2] dt: platform driver: Fill the resources before probe and defer if needed   Strashko, Grygorii
• [RESEND][PATCH v4] gpio: davinci: reuse for keystone soc   Grygorii Strashko
• [PATCH 4/4] ARM: keystone: Use dma-ranges for dma_pfn_offset configuration   Grygorii Strashko
• [PATCH 4/4] ARM: keystone: Use dma-ranges for dma_pfn_offset configuration   Grygorii Strashko
• [PATCH 4/4] ARM: keystone: Use dma-ranges for dma_pfn_offset configuration   Grygorii Strashko
• [PATCH v2 5/7] ARM: of: introduce common routine for DMA configuration   Grygorii Strashko
• Weird sched_clock behaviour during boot with -rc1   John Stultz
• Weird sched_clock behaviour during boot with -rc1   John Stultz
• [PATCH] sched_clock: Prevent callers from seeing half-updated data   John Stultz
• [PATCH v2] sched_clock: Prevent callers from seeing half-updated data   John Stultz
• [PATCH] sched_clock: Prevent callers from seeing half-updated data   John Stultz
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   John Stultz
• [PATCH 2/3] arm64: Add Kconfig option for Samsung GH7 SoC family   John Stultz
• [PATCH v4] of: add functions to count number of elements in a property   Heiko Stübner
• [PATCH v2 1/7] cpufreq: cpufreq-cpu0: allow optional safe voltage during frequency transitions   Heiko Stübner
• [PATCH v7 2/7] dt-bindings: sram: describe option to reserve parts of the memory   Heiko Stübner
• [PATCH v4] of: add functions to count number of elements in a property   Heiko Stübner
• [PATCH v2 2/9] clk: samsung: Provide common helpers for register save/restore   Heiko Stübner
• [PATCH v2 7/9] clk: samsung: Drop old suspend/resume code   Heiko Stübner
• [GIT PULL] ARM: imx: device tree changes for 3.15, take 1   Heiko Stübner
• [PATCH 00/12] ARM: S3C24XX: convert s3c2410, s3c2440 s3c2442 to common clock framework   Heiko Stübner
• [PATCH] ARM: SAMSUNG: remove unneeded s3c24xx_init_cpu()   Heiko Stübner
• [PATCH] ARM: SAMSUNG: remove obsolete tick.h   Heiko Stübner
• [PATCH 0/2] ARM: SAMSUNG: move all arches to generic uncompress.h   Heiko Stübner
• [PATCH 1/2] ARM: SAMSUNG: use generic uncompress.h   Heiko Stübner
• [PATCH 2/2] ARM: SAMSUNG: remove all custom uncompress.h   Heiko Stübner
• [PATCH 02/12] dt-bindings: document s3c24xx controller for external clock output   Heiko Stübner
• [PATCH v5 0/7] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework   Heiko Stübner
• [PATCH v5 1/7] clk: samsung: add pll_6552 variant for s3c2416   Heiko Stübner
• [PATCH v5 2/7] clk: samsung: add plls used by the s3c2443   Heiko Stübner
• [PATCH v5 3/7] dt-bindings: add binding for clock-controller of s3c2443 and following   Heiko Stübner
• [PATCH v5 4/7] clk: samsung: add clock-driver for s3c2416, s3c2443 and s3c2450   Heiko Stübner
• [PATCH v5 5/7] ARM: S3C24XX: prevent conflicts between ccf and non-ccf s3c24xx-socs   Heiko Stübner
• [PATCH v5 6/7] ARM: dt: add clock data for s3c2416   Heiko Stübner
• [PATCH v5 7/7] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework   Heiko Stübner
• [PATCH 08/12] clk: samsung: add clock controller driver for s3c2410, s3c2440 and s3c2442   Heiko Stübner
• [PATCH 08/12] clk: samsung: add clock controller driver for s3c2410, s3c2440 and s3c2442   Heiko Stübner
• [PATCH 0/3] dtc handling unreferenced nodes and an imx board dts   Heiko Stübner
• [PATCH 1/3] dtc: add ability to make nodes conditional on them being referenced   Heiko Stübner
• [PATCH 2/3] ARM: dts: imx6sl: move pingroups back into soc dtsi   Heiko Stübner
• [PATCH 3/3] ARM: dts: imx6sl: add board file for BQ Cervantes   Heiko Stübner
• [PATCH v2 0/5] ARM: S3C24XX: convert s3c2412 to common clock framework   Heiko Stübner
• [PATCH v2 1/5] ARM: S3C24XX: only store clock registers when old clock code is active   Heiko Stübner
• [PATCH v2 2/5] clk: samsung: add plls used by the early s3c24xx cpus   Heiko Stübner
• [PATCH v2 3/5] dt-bindings: add documentation for s3c2412 clock controller   Heiko Stübner
• [PATCH v2 4/5] clk: samsung: add clock controller driver for s3c2412   Heiko Stübner
• [PATCH v2 5/5] ARM: S3C24XX: convert s3c2412 to common clock framework   Heiko Stübner
• [PATCH v2 0/5] ARM: S3C24XX: convert s3c2412 to common clock framework   Heiko Stübner
• [PATCH v8 0/6] ARM: rockchip: add smp functionality   Heiko Stübner
• [PATCH v8 1/6] dt-bindings: sram: describe option to reserve parts of the memory   Heiko Stübner
• [PATCH v8 2/6] misc: sram: implement reserved sram areas   Heiko Stübner
• [PATCH v8 3/6] ARM: rockchip: add snoop-control-unit   Heiko Stübner
• [PATCH v8 4/6] ARM: rockchip: add sram dt nodes and documentation   Heiko Stübner
• [PATCH v8 5/6] ARM: rockchip: add power-management-unit   Heiko Stübner
• [PATCH v8 6/6] ARM: rockchip: add smp bringup code   Heiko Stübner
• [PATCH 0/2] ARM: SAMSUNG: move all arches to generic uncompress.h   Heiko Stübner
• [PATCH 0/2] ARM: SAMSUNG: move all arches to generic uncompress.h   Heiko Stübner
• [PATCH v2 0/2] ARM: SAMSUNG: remove the rest of local uncompress.h files   Heiko Stübner
• [PATCH v2 1/2] ARM: SAMSUNG: use generic uncompress.h   Heiko Stübner
• [PATCH v2 2/2] ARM: SAMSUNG: remove all custom uncompress.h   Heiko Stübner
• [PATCH v8.1 1/6] dt-bindings: sram: describe option to reserve parts of the memory   Heiko Stübner
• [PATCH 3/3] ARM: S3C24XX: select COMMON_CLK_SAMSUNG for S3C24XX   Heiko Stübner
• [PATCH v2 0/5] reserved-memory regions/CMA in devicetree, again   Marek Szyprowski
• [PATCH v2 1/5] drivers: of: add initialization code for reserved memory   Marek Szyprowski
• [PATCH v2 2/5] drivers: of: implement reserved-memory handling for dma   Marek Szyprowski
• [PATCH v2 3/5] drivers: of: implement reserved-memory handling for cma   Marek Szyprowski
• [PATCH v2 4/5] ARM: init: add support for reserved memory defined by device tree   Marek Szyprowski
• [PATCH v2 5/5] of: document bindings for reserved-memory nodes   Marek Szyprowski
• [RFC] dt-bindings: configuration of parent clocks and clock frequency   Marek Szyprowski
• [PATCH v2 4/5] ARM: init: add support for reserved memory defined by device tree   Marek Szyprowski
• [PATCH] iommu/exynos: Remove driver   Marek Szyprowski
• [PATCHv2 2/2] arm: Get rid of meminfo   Marek Szyprowski
• [PATCH v2 4/5] ARM: init: add support for reserved memory defined by device tree   Marek Szyprowski
• [PATCH v2 1/5] drivers: of: add initialization code for reserved memory   Marek Szyprowski
• [PATCHv3 2/2] arm: Get rid of meminfo   Marek Szyprowski
• [BUG] Circular locking dependency - DRM/CMA/MM/hotplug/...   Marek Szyprowski
• [PATCH v3 0/6] reserved-memory regions/CMA in devicetree, again   Marek Szyprowski
• [PATCH v3 1/6] base: dma-contiguous: add dma_contiguous_init_reserved_mem() function   Marek Szyprowski
• [PATCH v3 2/6] drivers: of: add initialization code for reserved memory   Marek Szyprowski
• [PATCH v3 3/6] drivers: of: implement reserved-memory handling for dma   Marek Szyprowski
• [PATCH v3 4/6] drivers: of: implement reserved-memory handling for cma   Marek Szyprowski
• [PATCH v3 5/6] ARM: init: add support for reserved memory defined by device tree   Marek Szyprowski
• [PATCH v3 6/6] of: document bindings for reserved-memory nodes   Marek Szyprowski
• [BUG] Circular locking dependency - DRM/CMA/MM/hotplug/...   Marek Szyprowski
• [PATCH v3 2/6] drivers: of: add initialization code for reserved memory   Marek Szyprowski
• [PATCH v3 3/6] drivers: of: implement reserved-memory handling for dma   Marek Szyprowski
• [PATCH v4 0/7] reserved-memory regions/CMA in devicetree, again   Marek Szyprowski
• [PATCH v4 1/7] drivers: of: add initialization code for reserved memory   Marek Szyprowski
• [PATCH v4 2/7] drivers: dma-coherent: add initialization from device tree   Marek Szyprowski
• [PATCH v4 3/7] drivers: dma-contiguous: add initialization from device tree   Marek Szyprowski
• [PATCH v4 4/7] of: document bindings for reserved-memory nodes   Marek Szyprowski
• [PATCH v4 5/7] arm: add support for reserved memory defined by device tree   Marek Szyprowski
• [PATCH v4 6/7] arm64: add support for reserved memory defined by device tree   Marek Szyprowski
• [PATCH v4 7/7] powerpc: add support for reserved memory defined by device tree   Marek Szyprowski
• [PATCH v4 1/7 fixup] drivers: of: add initialization code for reserved memory (fixup)   Marek Szyprowski
• [PATCH v4 1/7] drivers: of: add initialization code for reserved memory   Marek Szyprowski
• [PATCH v5 00/11] reserved-memory regions/CMA in devicetree, again   Marek Szyprowski
• [PATCH v5 01/11] of: document bindings for reserved-memory nodes   Marek Szyprowski
• [PATCH v5 02/11] drivers: of: add initialization code for static reserved memory   Marek Szyprowski
• [PATCH v5 03/11] drivers: of: add initialization code for dynamic reserved memory   Marek Szyprowski
• [PATCH v5 04/11] drivers: of: add support for custom reserved memory drivers   Marek Szyprowski
• [PATCH v5 05/11] drivers: of: add automated assignment of reserved regions to client devices   Marek Szyprowski
• [PATCH v5 06/11] drivers: of: initialize and assign reserved memory to newly created devices   Marek Szyprowski
• [PATCH v5 07/11] drivers: dma-coherent: add initialization from device tree   Marek Szyprowski
• [PATCH v5 08/11] drivers: dma-contiguous: add initialization from device tree   Marek Szyprowski
• [PATCH v5 09/11] arm: add support for reserved memory defined by device tree   Marek Szyprowski
• [PATCH v5 10/11] arm64: add support for reserved memory defined by device tree   Marek Szyprowski
• [PATCH v5 11/11] powerpc: add support for reserved memory defined by device tree   Marek Szyprowski
• [PATCH 0/2] arm: dma-mapping: add dynamic resize of IOVA bitmap   Marek Szyprowski
• [PATCH 1/2] arm: dma-mapping: Add support to extend DMA IOMMU mappings   Marek Szyprowski
• [PATCH 2/2] arm: dma-mapping: remove order parameter from arm_iommu_create_mapping()   Marek Szyprowski
• [PATCH v5 06/11] drivers: of: initialize and assign reserved memory to newly created devices   Marek Szyprowski
• [PATCH v5 01/11] of: document bindings for reserved-memory nodes   Marek Szyprowski
• [PATCH v6 00/11] reserved-memory regions/CMA in devicetree, again   Marek Szyprowski
• [PATCH v6 01/11] of: document bindings for reserved-memory nodes   Marek Szyprowski
• [PATCH v6 02/11] drivers: of: add initialization code for static reserved memory   Marek Szyprowski
• [PATCH v6 03/11] drivers: of: add initialization code for dynamic reserved memory   Marek Szyprowski
• [PATCH v6 04/11] drivers: of: add support for custom reserved memory drivers   Marek Szyprowski
• [PATCH v6 05/11] drivers: of: add automated assignment of reserved regions to client devices   Marek Szyprowski
• [PATCH v6 06/11] drivers: of: initialize and assign reserved memory to newly created devices   Marek Szyprowski
• [PATCH v6 07/11] drivers: dma-coherent: add initialization from device tree   Marek Szyprowski
• [PATCH v6 08/11] drivers: dma-contiguous: add initialization from device tree   Marek Szyprowski
• [PATCH v6 09/11] arm: add support for reserved memory defined by device tree   Marek Szyprowski
• [PATCH v6 10/11] arm64: add support for reserved memory defined by device tree   Marek Szyprowski
• [PATCH v6 11/11] powerpc: add support for reserved memory defined by device tree   Marek Szyprowski
• [PATCH 5/5] iommu/arm-smmu: fix compilation issue when !CONFIG_ARM_AMBA   Timur Tabi
• [PATCH 5/5] iommu/arm-smmu: fix compilation issue when !CONFIG_ARM_AMBA   Timur Tabi
• [PATCH 01/15] ASoC: fsl-ssi: Use regmap   Timur Tabi
• [PATCH 3/5] documentation/iommu: update description of ARM System MMU binding   Timur Tabi
• [PATCH 3/5] documentation/iommu: update description of ARM System MMU binding   Timur Tabi
• [PATCH v2 1/6] audit: Enable arm64 support   AKASHI Takahiro
• [PATCH] audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL   AKASHI Takahiro
• [PATCH v4 0/1] audit: generic compat system call support   AKASHI Takahiro
• [PATCH v4 1/1] audit: Add generic compat syscall support   AKASHI Takahiro
• [PATCH v3 0/3] arm64: Add audit support   AKASHI Takahiro
• [PATCH v3 1/3] arm64: Add regs_return_value() in syscall.h   AKASHI Takahiro
• [PATCH v3 2/3] arm64: Add audit support   AKASHI Takahiro
• [PATCH v3 3/3] arm64: audit: Add audit hook in ptrace/syscall_trace   AKASHI Takahiro
• [PATCH v3 3/3] arm64: audit: Add audit hook in ptrace/syscall_trace   AKASHI Takahiro
• [PATCH] arm64: make a single hook to syscall_trace() for all syscall features   AKASHI Takahiro
• [PATCH v4 0/3] arm64: Add audit support   AKASHI Takahiro
• [PATCH v4 1/3] arm64: Add regs_return_value() in syscall.h   AKASHI Takahiro
• [PATCH v4 2/3] arm64: Add audit support   AKASHI Takahiro
• [PATCH v4 3/3] arm64: audit: Add audit hook in ptrace/syscall_trace   AKASHI Takahiro
• [PATCH 0/2] arm64: Add seccomp support   AKASHI Takahiro
• [PATCH 1/2] arm64: Add seccomp support   AKASHI Takahiro
• [PATCH 2/2] arm64: is_compat_task is defined both in asm/compat.h and linux/compat.h   AKASHI Takahiro
• [PATCH v3 0/6] arm64: Add ftrace support   AKASHI Takahiro
• [PATCH v3 1/6] arm64: Add ftrace support   AKASHI Takahiro
• [PATCH v3 2/6] arm64: ftrace: Add dynamic ftrace support   AKASHI Takahiro
• [PATCH v3 3/6] arm64: ftrace: Add CALLER_ADDRx macros   AKASHI Takahiro
• [PATCH v3 4/6] ftrace: Add arm64 support to recordmcount   AKASHI Takahiro
• [PATCH v3 5/6] arm64: ftrace: Add system call tracepoint   AKASHI Takahiro
• [PATCH v3 6/6] arm64: Add 'notrace' attribute to unwind_frame() for ftrace   AKASHI Takahiro
• [PATCH v3 1/6] arm64: Add ftrace support   AKASHI Takahiro
• [PATCH v3 5/6] arm64: ftrace: Add system call tracepoint   AKASHI Takahiro
• [PATCH 2/2] arm64: is_compat_task is defined both in asm/compat.h and linux/compat.h   AKASHI Takahiro
• [PATCH 1/2] arm64: Add seccomp support   AKASHI Takahiro
• [PATCH] arm64: make a single hook to syscall_trace() for all syscall features   AKASHI Takahiro
• [PATCH 1/2] arm64: Add seccomp support   AKASHI Takahiro
• [PATCH v2 0/1] arm64: make a single hook to syscall_trace() for all syscall features   AKASHI Takahiro
• [PATCH v2 1/1] arm64: make a single hook to syscall_trace() for all syscall features   AKASHI Takahiro
• [PATCH v2 0/1] audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL   AKASHI Takahiro
• [PATCH v2 1/1] audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL   AKASHI Takahiro
• [PATCH v5 0/3] arm64: Add audit support   AKASHI Takahiro
• [PATCH v5 1/3] arm64: Add regs_return_value() in syscall.h   AKASHI Takahiro
• [PATCH v5 2/3] arm64: Add audit support   AKASHI Takahiro
• [PATCH v5 3/3] arm64: audit: Add audit hook in ptrace/syscall_trace   AKASHI Takahiro
• [PATCH v2 0/3] arm64: Add seccomp support   AKASHI Takahiro
• [PATCH v2 1/3] asm-generic: Add generic seccomp.h for secure computing mode 1   AKASHI Takahiro
• [PATCH v2 2/3] arm64: Add seccomp support   AKASHI Takahiro
• [PATCH v2 3/3] arm64: is_compat_task is defined both in asm/compat.h and linux/compat.h   AKASHI Takahiro
• [PATCH v4 0/7] arm64: Add ftrace support   AKASHI Takahiro
• [PATCH v4 1/7] arm64: Add ftrace support   AKASHI Takahiro
• [PATCH v4 2/7] arm64: ftrace: Add dynamic ftrace support   AKASHI Takahiro
• [PATCH v4 3/7] arm64: ftrace: Add CALLER_ADDRx macros   AKASHI Takahiro
• [PATCH v4 4/7] ftrace: Add arm64 support to recordmcount   AKASHI Takahiro
• [PATCH v4 5/7] arm64: ftrace: Add system call tracepoint   AKASHI Takahiro
• [PATCH v4 6/7] arm64: Add 'notrace' attribute to unwind_frame() for ftrace   AKASHI Takahiro
• [PATCH v4 7/7] arm64: add __ASSEMBLY__ in asm/insn.h   AKASHI Takahiro
• [PATCH v2 1/1] arm64: make a single hook to syscall_trace() for all syscall features   AKASHI Takahiro
• [PATCH v2 1/1] arm64: make a single hook to syscall_trace() for all syscall features   AKASHI Takahiro
• [PATCH v4 1/7] arm64: Add ftrace support   AKASHI Takahiro
• [PATCH v3 0/2] arm64: prerequisites for audit and ftrace   AKASHI Takahiro
• [PATCH v3 1/2] arm64: make a single hook to syscall_trace() for all syscall features   AKASHI Takahiro
• [PATCH v3 2/2] arm64: Add regs_return_value() in syscall.h   AKASHI Takahiro
• [PATCH v6 0/2] arm64: Add audit support   AKASHI Takahiro
• [PATCH v6 1/2] arm64: Add audit support   AKASHI Takahiro
• [PATCH v6 2/2] arm64: audit: Add audit hook in ptrace/syscall_trace   AKASHI Takahiro
• [PATCH v5 0/7] arm64: Add ftrace support   AKASHI Takahiro
• [PATCH v5 1/7] arm64: Add ftrace support   AKASHI Takahiro
• [PATCH v5 2/7] arm64: ftrace: Add dynamic ftrace support   AKASHI Takahiro
• [PATCH v5 3/7] arm64: ftrace: Add CALLER_ADDRx macros   AKASHI Takahiro
• [PATCH v5 4/7] ftrace: Add arm64 support to recordmcount   AKASHI Takahiro
• [PATCH v5 5/7] arm64: ftrace: Add system call tracepoint   AKASHI Takahiro
• [PATCH v5 6/7] arm64: Add 'notrace' attribute to unwind_frame() for ftrace   AKASHI Takahiro
• [PATCH v5 7/7] arm64: add __ASSEMBLY__ in asm/insn.h   AKASHI Takahiro
• [PATCH 0/4] clk: mvebu: fix clk init order   Willy Tarreau
• [PATCH 16/18] charger: max14577: Add support for MAX77836 charger   Jenny Tc
• [PATCH v3 14/15] charger: max14577: Configure battery-dependent settings from DTS   Jenny Tc
• [PATCH v2] dma: Add Xilinx AXI Video Direct Memory Access Engine driver support   Srikanth Thokala
• [PATCH v2] dma: Add Xilinx AXI Video Direct Memory Access Engine driver support   Srikanth Thokala
• [PATCH v2] dma: Add Xilinx AXI Video Direct Memory Access Engine driver support   Srikanth Thokala
• [PATCH v2] dma: Add Xilinx AXI Video Direct Memory Access Engine driver support   Srikanth Thokala
• [PATCH v3 0/3] Add Xilinx AXI Video DMA Engine driver   Srikanth Thokala
• [PATCH v3 1/3] dma: Support multiple interleaved frames with non-contiguous memory   Srikanth Thokala
• [PATCH v3 2/3] dma: Add Xilinx Video DMA DT Binding Documentation   Srikanth Thokala
• [PATCH v3 3/3] dma: Add Xilinx AXI Video Direct Memory Access Engine driver support   Srikanth Thokala
• [PATCH] pcie: Add Xilinx PCIe Host Bridge IP driver   Srikanth Thokala
• [PATCH v3 1/3] dma: Support multiple interleaved frames with non-contiguous memory   Srikanth Thokala
• [PATCH v3 1/3] dma: Support multiple interleaved frames with non-contiguous memory   Srikanth Thokala
• [PATCH v3 1/3] dma: Support multiple interleaved frames with non-contiguous memory   Srikanth Thokala
• [PATCH v3 1/3] dma: Support multiple interleaved frames with non-contiguous memory   Srikanth Thokala
• [PATCH v3 1/3] dma: Support multiple interleaved frames with non-contiguous memory   Srikanth Thokala
• [PATCH] pcie: Add Xilinx PCIe Host Bridge IP driver   Srikanth Thokala
• [PATCH v3 1/3] dma: Support multiple interleaved frames with non-contiguous memory   Srikanth Thokala
• [PATCH] pcie: Add Xilinx PCIe Host Bridge IP driver   Srikanth Thokala
• [PATCH] pcie: Add Xilinx PCIe Host Bridge IP driver   Srikanth Thokala
• [PATCH v3 1/3] dma: Support multiple interleaved frames with non-contiguous memory   Srikanth Thokala
• [PATCH v3 1/3] dma: Support multiple interleaved frames with non-contiguous memory   Srikanth Thokala
• [PATCH v5 4/8] Documentation: add the document for the SPI NOR framework   Konstantin Tokarev
• [linux-pm] ARM hibernation / suspend-to-disk   TonyHo
• [PATCH 1/4] ARM: STi: add stid127 soc support   Alexandre Torgue
• [PATCH] input: sirfsoc-onkey - report onkey untouch event by detecting pin status   Dmitry Torokhov
• [PATCH] input: sirfsoc-onkey - report onkey untouch event by detecting pin status   Dmitry Torokhov
• [PATCH v3] input: sirfsoc-onkey - report onkey untouch event by detecting pin status   Dmitry Torokhov
• [PATCH v3] input: sirfsoc-onkey - report onkey untouch event by detecting pin status   Dmitry Torokhov
• [PATCH 2/3] input: touchscreen: imx25 tcq driver   Dmitry Torokhov
• Clock divisor/parent settings changes   William Towle
• [PATCH 1/3] clk: rcar-h2: fix sd0/sd1 divisor table   William Towle
• [PATCH 2/3] ARM: shmobile: r8a7790: specify multiple parents for cpg_clks   William Towle
• [PATCH 3/3] clk: shmobile: handle multiple parent clocks for cpg clocks   William Towle
• Recent 3.x kernels: Memory leak causing OOMs   Theodore Ts'o
• [PATCH v4 0/8] ARM: sunxi: rename DT clock node names to clk at N   Chen-Yu Tsai
• [PATCH v4 1/8] clk: sunxi: add clock-output-names dt property support   Chen-Yu Tsai
• [PATCH v4 2/8] clk: sunxi: update clock-output-names dt binding documentation   Chen-Yu Tsai
• [PATCH v4 3/8] clk: sunxi: add names for pll5, pll6 parent clocks to factors_data   Chen-Yu Tsai
• [PATCH v4 4/8] clk: sunxi: get divs parent clock name from parent factor clock   Chen-Yu Tsai
• [PATCH v4 5/8] ARM: dts: sun4i: rename clock node names to clk at N   Chen-Yu Tsai
• [PATCH v4 6/8] ARM: dts: sun5i: rename clock node names to clk at N   Chen-Yu Tsai
• [PATCH v4 7/8] ARM: dts: sun6i: rename clock node names to clk at N   Chen-Yu Tsai
• [PATCH v4 8/8] ARM: dts: sun7i: rename clock node names to clk at N   Chen-Yu Tsai
• [PATCH v3 0/8] Add Allwinner A20 GMAC ethernet support   Chen-Yu Tsai
• [PATCH v3 1/8] clk: sunxi: Add Allwinner A20/A31 GMAC clock unit   Chen-Yu Tsai
• [PATCH v3 2/8] ARM: dts: sun7i: Add GMAC clock node to sun7i DTSI   Chen-Yu Tsai
• [PATCH v3 3/8] ARM: dts: sun7i: Add GMAC controller node to sun7i DTSI   Chen-Yu Tsai
• [PATCH v3 4/8] ARM: dts: sun7i: Add pin muxing options for the GMAC   Chen-Yu Tsai
• [PATCH v3 5/8] ARM: dts: sun7i: cubietruck: Enable the GMAC   Chen-Yu Tsai
• [PATCH v3 6/8] ARM: dts: sun7i: cubieboard2: Enable GMAC instead of EMAC   Chen-Yu Tsai
• [PATCH v3 7/8] ARM: dts: sun7i: olinuxino-micro: Enable GMAC instead of EMAC   Chen-Yu Tsai
• [PATCH v3 8/8] ARM: dts: sun7i: Add ethernet alias for GMAC   Chen-Yu Tsai
• [PATCH v3 1/8] clk: sunxi: Add Allwinner A20/A31 GMAC clock unit   Chen-Yu Tsai
• [PATCH v3 2/8] ARM: dts: sun7i: Add GMAC clock node to sun7i DTSI   Chen-Yu Tsai
• [PATCH v3 8/8] ARM: dts: sun7i: Add ethernet alias for GMAC   Chen-Yu Tsai
• [linux-sunxi] [PATCH v2] ARM: sunxi: Add driver for sunxi usb phy   Chen-Yu Tsai
• [PATCH v4 0/8] Add Allwinner A20 GMAC ethernet support   Chen-Yu Tsai
• [PATCH v4 1/8] clk: sunxi: Add Allwinner A20/A31 GMAC clock unit   Chen-Yu Tsai
• [PATCH v4 2/8] ARM: dts: sun7i: Add GMAC clock node to sun7i DTSI   Chen-Yu Tsai
• [PATCH v4 3/8] ARM: dts: sun7i: Add GMAC controller node to sun7i DTSI   Chen-Yu Tsai
• [PATCH v4 4/8] ARM: dts: sun7i: Add pin muxing options for the GMAC   Chen-Yu Tsai
• [PATCH v4 5/8] ARM: dts: sun7i: cubietruck: Enable the GMAC   Chen-Yu Tsai
• [PATCH v4 6/8] ARM: dts: sun7i: cubieboard2: Enable GMAC instead of EMAC   Chen-Yu Tsai
• [PATCH v4 7/8] ARM: dts: sun7i: a20-olinuxino-micro: Enable GMAC instead of EMAC   Chen-Yu Tsai
• [PATCH v4 8/8] ARM: dts: sun7i: Add ethernet alias for GMAC   Chen-Yu Tsai
• [PATCH] pinctrl: sunxi: use chained_irq_{enter, exit} for GIC compatibility   Chen-Yu Tsai
• [PATCH v5] clk: sunxi: Add Allwinner A20/A31 GMAC clock unit   Chen-Yu Tsai
• [linux-sunxi] [PATCH v5 4/8] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Chen-Yu Tsai
• [linux-sunxi] [PATCH v3 1/4] ARM: sunxi: Add driver for sunxi usb phy   Chen-Yu Tsai
• [PATCH v2 1/1] audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL   Matt Turner
• [PATCH] clk: Fix notifier documentation   Mike Turquette
• [PATCH 0/4] clk: mvebu: fix clk init order   Mike Turquette
• [PATCH 0/2] clk: shmobile rcar-gen2 fixes   Mike Turquette
• [PATCH] clk: Fix notifier documentation   Mike Turquette
• [PATCH v4 1/5] clk: sunxi: Add support for PLL6 on the A31   Mike Turquette
• [GIT PULLv3] clk: socfpga: Clean-ups for 3.14   Mike Turquette
• [PATCHv9 1/4] clk: socfpga: Add a clk-phase property to the "altr, socfpga-gate-clk"   Mike Turquette
• [GIT PULL] clk: socfpga: Clock updates for v3.15   Mike Turquette
• [PATCH 08/12] clk: samsung: add clock controller driver for s3c2410, s3c2440 and s3c2442   Mike Turquette
• [RFC] dt-bindings: configuration of parent clocks and clock frequency   Mike Turquette
• [PATCH v7 2/8] clk: sunxi: Implement MMC phase control   Mike Turquette
• [GIT PULL] clk: mvebu: fixes for v3.14   Mike Turquette
• [PATCH v2 0/2] clk: sunxi: Change compatibles pattern   Mike Turquette
• [PATCH v4 1/8] clk: sunxi: Add Allwinner A20/A31 GMAC clock unit   Mike Turquette
• [PATCH 0/2] clk: keystone: Couple of fixes for 3.14-rcx   Mike Turquette
• [PATCH v7 2/8] clk: sunxi: Implement MMC phase control   Mike Turquette
• [PATCH v2] clk: respect the clock dependencies in of_clk_init   Mike Turquette
• [GIT PULL] clk: mvebu: fixes for v3.14   Mike Turquette
• [PATCH 2/2] clk: ux500: Staticize ux500_twocell_get   Mike Turquette
• [PATCH 1/2] clk: tegra: Staticize tegra_clk_periph_no_gate_ops   Mike Turquette
• [PATCH v2] clk: respect the clock dependencies in of_clk_init   Mike Turquette
• [PATCH v2 0/5] ARM: S3C24XX: convert s3c2412 to common clock framework   Mike Turquette
• [GIT PULL] clk: mvebu driver changes for v3.15   Mike Turquette
• [PATCH RFC v1 1/3] clk: Add function to parse an arbitrary clocks list property   Mike Turquette
• [PATCH RFC v1 3/3] clk: Add handling of clk parent and rate assigned from DT   Mike Turquette
• Tegra clockframework fixes for 3.14   Mike Turquette
• [PATCH v2 2/3] clk: bcm281xx: don't disable unused peripheral clocks   Mike Turquette
• ccf: where to put constraints?   Mike Turquette
• ccf: where to put constraints?   Mike Turquette
• [PATCH RESEND v3] clk: return probe defer when DT clock not yet ready   Mike Turquette
• [PATCH v2] clk: respect the clock dependencies in of_clk_init   Mike Turquette
• [RFC PATCH 1/6] PM / Voltagedomain: Add generic clk notifier handler for regulator based dynamic voltage scaling   Mike Turquette
• [PATCH] clk: Correct handling of NULL clk in __clk_{get, put}   Mike Turquette
• [PATCH 1/2] clk: ti: am335x: remove unecessary cpu0 clk node   Mike Turquette
• [PATCH] clk: shmobile: div6: use proper description in kernel doc   Mike Turquette
• [PATCH v8 06/14] CLK: TI: OMAP3: Get rid of unused USB Host dummy clocks   Mike Turquette
• [PATCH] clk: zynq: Use clk_readl/clk_writel helper function   Mike Turquette
• [PATCH 1/3] clk: socfpga: Fix integer overflow in clock calculation   Mike Turquette
• [PATCH] clk: nomadik: fix multiplatform problem   Mike Turquette
• [PATCH 1/2] clk: ti: am335x: remove unecessary cpu0 clk node   Mike Turquette
• Tegra clockframework fixes for 3.14   Mike Turquette
• [PATCH 1/3] clk: socfpga: Fix integer overflow in clock calculation   Mike Turquette
• [PATCH v3 1/2] CLK: TI: OMAP4/5/DRA7: Remove gpmc_fck from dummy clocks   Mike Turquette
• [PATCH v8 06/14] CLK: TI: OMAP3: Get rid of unused USB Host dummy clocks   Mike Turquette
• [PATCH] Documentation: clk: Add locking documentation   Mike Turquette
• [PATCH] clk: hisilicon: add hi3620_mmc_clks   Mike Turquette
• [PATCH 3/3] ARM: S3C24XX: select COMMON_CLK_SAMSUNG for S3C24XX   Mike Turquette
• [PATCH v2 2/4] clk: at91: propagate rate change on system clks   Mike Turquette
• [PATCH resend] clk: axi-clkgen: Add support for v2   Mike Turquette
• [PATCH] clk:at91: Fix memory leak in of_at91_clk_master_setup()   Mike Turquette
• [PATCH 1/8] clk: divider: fix rate calculation for fractional rates   Mike Turquette
• [RFC PATCH 1/6] PM / Voltagedomain: Add generic clk notifier handler for regulator based dynamic voltage scaling   Mike Turquette
• TWL6040 fails to initialize   Peter Ujfalusi
• TWL6040 fails to initialize   Peter Ujfalusi
• TWL6040 fails to initialize   Peter Ujfalusi
• TWL6040 fails to initialize   Peter Ujfalusi
• [PATCH 00/11] ARM: shmobile: RSPI RZ and QSPI SoC and board integration   Geert Uytterhoeven
• [PATCH v5 01/11] ARM: shmobile: r7s72100 clock: Add RSPI clocks   Geert Uytterhoeven
• [PATCH v5 02/11] ARM: shmobile: genmai legacy: Add RSPI support   Geert Uytterhoeven
• [PATCH v3 03/11] ARM: shmobile: genmai defconfig: Enable RSPI   Geert Uytterhoeven
• [PATCH v3 04/11] ARM: shmobile: r7s72100 clock: Add RSPI clocks for DT   Geert Uytterhoeven
• [PATCH v5 05/11] ARM: shmobile: r7s72100 dtsi: Add RSPI nodes   Geert Uytterhoeven
• [PATCH v4 06/11] ARM: shmobile: r8a7791 clock: add QSPI clocks   Geert Uytterhoeven
• [PATCH v4 07/11] ARM: shmobile: koelsch legacy: Add QSPI support   Geert Uytterhoeven
• [PATCH v4 08/11] ARM: shmobile: koelsch defconfig: Enable RSPI and MTD_M25P80   Geert Uytterhoeven
• [PATCH v3 09/11] ARM: shmobile: r8a7791 dtsi: Add QSPI node   Geert Uytterhoeven
• [PATCH v3 10/11] ARM: shmobile: koelsch dts: Add QSPI nodes   Geert Uytterhoeven
• [PATCH v2 11/11] ARM: shmobile: lager legacy: Switch QSPI to named IRQs   Geert Uytterhoeven
• [PATCH 00/11] ARM: shmobile: RSPI RZ and QSPI SoC and board integration   Geert Uytterhoeven
• [PATCH 0/7] ARM: shmobile: r8a7790/Lager QSPI SoC/board integration   Geert Uytterhoeven
• [PATCH 1/7] pinctrl: sh-pfc: r8a7790: Add QSPI pin groups   Geert Uytterhoeven
• [PATCH 2/7] ARM: shmobile: lager legacy: Add QSPI pinmux   Geert Uytterhoeven
• [PATCH 3/7] ARM: shmobile: r8a7790 dtsi: Add QSPI node   Geert Uytterhoeven
• [PATCH 4/7] ARM: shmobile: lager dts: Add QSPI nodes   Geert Uytterhoeven
• [PATCH 5/7] ARM: shmobile: lager defconfig: Enable RSPI and MTD_M25P80   Geert Uytterhoeven
• [PATCH 6/7] ARM: shmobile: lager legacy: Enable Quad SPI transfers for the SPI FLASH   Geert Uytterhoeven
• [PATCH 7/7] ARM: shmobile: lager dts: Enable Quad SPI transfers for the SPI FLASH   Geert Uytterhoeven
• [PATCH 1/7] pinctrl: sh-pfc: r8a7790: Add QSPI pin groups   Geert Uytterhoeven
• [PATCH] ARM: shmobile: r8a7778 dtsi: Remove duplicate i2c nodes   Geert Uytterhoeven
• [PATCH 23/27] clocksource: sh_cmt: Add DT support   Geert Uytterhoeven
• [PATCH/RFC] ARM: shmobile: Add defconfig for shmobile mulitplatfom   Geert Uytterhoeven
• [PATCH] ARM: shmobile: Remove __init from rcar_gen2_read_mode_pins()   Geert Uytterhoeven
• [PATCH] ARM: shmobile: Check MD21 at SMP boot in case of APMU   Geert Uytterhoeven
• [PATCH 2/5] ARM: shmobile: r8a7791: add i2c master nodes to dtsi   Geert Uytterhoeven
• [PATCH 2/5] ARM: shmobile: r8a7791: add i2c master nodes to dtsi   Geert Uytterhoeven
• [PATCH] ARM: shmobile: Remove __init from rcar_gen2_read_mode_pins()   Geert Uytterhoeven
• [RFC/PATCH 0/3] Add devicetree scanning for randomness   Geert Uytterhoeven
• [PATCH 00/11] ARM: shmobile: MSIOF integration on r8a7790/lager and r8a7791/koelsch   Geert Uytterhoeven
• [PATCH 01/11] ARM: shmobile: r8a7791 dtsi: Fix typo in msiof2 clock output name   Geert Uytterhoeven
• [PATCH 02/11] ARM: shmobile: r8a7790: Add MSIOF clocks   Geert Uytterhoeven
• [PATCH 03/11] ARM: shmobile: r8a7791: Add MSIOF clocks   Geert Uytterhoeven
• [PATCH 04/11] ARM: shmobile: lager legacy: Add MSIOF support   Geert Uytterhoeven
• [PATCH 05/11] ARM: shmobile: koelsch legacy: Add MSIOF support   Geert Uytterhoeven
• [PATCH 06/11] ARM: shmobile: r8a7790/lager dts: Rename label spi to qspi, add spi0 alias   Geert Uytterhoeven
• [PATCH 07/11] ARM: shmobile: r8a7791/koelsch dts: Rename label spi to qspi, add spi0 alias   Geert Uytterhoeven
• [PATCH 08/11] ARM: shmobile: r8a7790 dtsi: Add MSIOF nodes and aliases   Geert Uytterhoeven
• [PATCH 09/11] ARM: shmobile: r8a7791 dtsi: Add MSIOF nodes and aliases   Geert Uytterhoeven
• [PATCH 10/11] ARM: shmobile: lager dts: Add MSIOF nodes   Geert Uytterhoeven
• [PATCH 11/11] ARM: shmobile: koelsch dts: Add MSIOF nodes   Geert Uytterhoeven
• [PATCH v2 1/2] ARM: shmobile: r8a7778/r8a7779 dtsi: Improve and correct HSPI bindings   Geert Uytterhoeven
• [PATCH v2 2/2] ARM: shmobile: bockw reference dts: Add SPI FLASH   Geert Uytterhoeven
• [PATCH 04/11] ARM: shmobile: lager legacy: Add MSIOF support   Geert Uytterhoeven
• [PATCH] ARM: shmobile: koelsch/lager/multi defconfig: Enable MSIOF   Geert Uytterhoeven
• [PATCH 04/11] ARM: shmobile: lager legacy: Add MSIOF support   Geert Uytterhoeven
• [PATCH 04/11] ARM: shmobile: lager legacy: Add MSIOF support   Geert Uytterhoeven
• [PATCH v2] arm/smp: Absorb boot_secondary()   Geert Uytterhoeven
• [PATCH v2 00/11] ARM: shmobile: MSIOF integration on r8a7790/lager and r8a7791/koelsch   Geert Uytterhoeven
• [PATCH v2 01/11] ARM: shmobile: r8a7790: Add MSIOF clocks   Geert Uytterhoeven
• [PATCH v2 02/11] ARM: shmobile: r8a7791: Add MSIOF clocks   Geert Uytterhoeven
• [PATCH v2 03/11] ARM: shmobile: lager legacy: Add MSIOF support   Geert Uytterhoeven
• [PATCH v2 04/11] ARM: shmobile: koelsch legacy: Add MSIOF support   Geert Uytterhoeven
• [PATCH v2 05/11] ARM: shmobile: r8a7790/lager dts: Rename label spi to qspi, add spi0 alias   Geert Uytterhoeven
• [PATCH v2 06/11] ARM: shmobile: r8a7791/koelsch dts: Rename label spi to qspi, add spi0 alias   Geert Uytterhoeven
• [PATCH v2 07/11] ARM: shmobile: r8a7790 dtsi: Add MSIOF nodes and aliases   Geert Uytterhoeven
• [PATCH v2 08/11] ARM: shmobile: r8a7791 dtsi: Add MSIOF nodes and aliases   Geert Uytterhoeven
• [PATCH v2 09/11] ARM: shmobile: lager dts: Add MSIOF nodes   Geert Uytterhoeven
• [PATCH v2 10/11] ARM: shmobile: koelsch dts: Add MSIOF nodes   Geert Uytterhoeven
• [PATCH v2 11/11] ARM: shmobile: koelsch/lager/multi defconfig: Enable MSIOF   Geert Uytterhoeven
• [PATCH v3 2/3] ARM: shmobile: r8a7778/r8a7779 dtsi: Improve and correct HSPI nodes   Geert Uytterhoeven
• [PATCH v3 3/3] ARM: shmobile: bockw reference dts: Add SPI FLASH   Geert Uytterhoeven
• [PATCH v3 01/20] clk: shmobile: r8a7779: Add clocks support   Geert Uytterhoeven
• [PATCH v3 04/20] ARM: shmobile: r8a7779: Add clocks   Geert Uytterhoeven
• [PATCH v3 15/20] ARM: shmobile: marzen-reference: Instantiate clkdevs for SCIF and TMU   Geert Uytterhoeven
• [PATCH v3 20/20] ARM: shmobile: marzen-reference: Remove legacy clock support   Geert Uytterhoeven
• [PATCH v3 01/20] clk: shmobile: r8a7779: Add clocks support   Geert Uytterhoeven
• [PATCH] ARM: shmobile: Check r8a7791 MD21 at SMP boot   Geert Uytterhoeven
• [PATCH] ARM: shmobile: Check r8a7791 MD21 at SMP boot   Geert Uytterhoeven
• [PATCH] video: imxfb: Use regulator API with LCD class for powering   Tomi Valkeinen
• [PATCH] video: imxfb: Use regulator API with LCD class for powering   Tomi Valkeinen
• [PATCH] video: imxfb: Use regulator API with LCD class for powering   Tomi Valkeinen
• [PATCH] video: xilinxfb: Move xilinxfb_platform_data directly to the driver   Tomi Valkeinen
• [PATCH] clk: divider: fix rate calculation for fractional rates   Tomi Valkeinen
• [PATCH 0/8] OMAP: OMAP3 DSS related clock patches   Tomi Valkeinen
• [PATCH 1/8] clk: divider: fix rate calculation for fractional rates   Tomi Valkeinen
• [PATCH 2/8] clk: ti/divider: fix rate calculation for fractional rates   Tomi Valkeinen
• [PATCH 3/8] ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT   Tomi Valkeinen
• [PATCH 4/8] ARM: dts: fix omap3 dss clock handle names   Tomi Valkeinen
• [PATCH 5/8] ARM: dts: fix DPLL4 x2 clkouts on 3630   Tomi Valkeinen
• [PATCH 6/8] ARM: dts: use ti, fixed-factor-clock for dpll4_m4x2_mul_ck   Tomi Valkeinen
• [PATCH 7/8] ARM: dts: set 'ti,set-rate-parent' for dpll4_m4 path   Tomi Valkeinen
• [PATCH 8/8] OMAPDSS: fix rounding when calculating fclk rate   Tomi Valkeinen
• [PATCH 3/8] ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT   Tomi Valkeinen
• [PATCHv14][ 3/4] video: Kconfig: Allow more broad selection of the imxfb framebuffer driver.   Tomi Valkeinen
• [PATCH 7/8] ARM: dts: set 'ti,set-rate-parent' for dpll4_m4 path   Tomi Valkeinen
• [PATCH 6/8] ARM: dts: use ti, fixed-factor-clock for dpll4_m4x2_mul_ck   Tomi Valkeinen
• [PATCH v4 3/4] ARM: OMAP2+: add legacy display for omap3 DBB056   Tomi Valkeinen
• [PATCH 2/2] ARM: dts: duovero-parlor: Add HDMI output   Tomi Valkeinen
• [PATCH 2/2] ARM: OMAP2+: fix dpll round_rate() to actually round   Tomi Valkeinen
• [PATCH 2/2] ARM: OMAP2+: fix dpll round_rate() to actually round   Tomi Valkeinen
• [PATCH 2/2] ARM: dts: duovero-parlor: Add HDMI output   Tomi Valkeinen
• [PATCH 2/2] ARM: dts: duovero-parlor: Add HDMI output   Tomi Valkeinen
• [RFC PATCH v4 3/8] staging: imx-drm: Document updated imx-drm device tree bindings   Tomi Valkeinen
• [RFC PATCH v4 3/8] staging: imx-drm: Document updated imx-drm device tree bindings   Tomi Valkeinen
• [RFC PATCH v4 3/8] staging: imx-drm: Document updated imx-drm device tree bindings   Tomi Valkeinen
• [RFC PATCH v4 3/8] staging: imx-drm: Document updated imx-drm device tree bindings   Tomi Valkeinen
• [RFC PATCH v4 3/8] staging: imx-drm: Document updated imx-drm device tree bindings   Tomi Valkeinen
• [PATCH 1/8] clk: divider: fix rate calculation for fractional rates   Tomi Valkeinen
• [PATCH 0/9] Doc/DT: DT bindings for various display components   Tomi Valkeinen
• [PATCH 1/9] Doc/DT: Add OMAP DSS DT Bindings   Tomi Valkeinen
• [PATCH 2/9] Doc/DT: Add DT binding documentation for Analog TV Connector   Tomi Valkeinen
• [PATCH 3/9] Doc/DT: Add DT binding documentation for DVI Connector   Tomi Valkeinen
• [PATCH 4/9] Doc/DT: Add DT binding documentation for HDMI Connector   Tomi Valkeinen
• [PATCH 5/9] Doc/DT: Add DT binding documentation for MIPI DPI Panel   Tomi Valkeinen
• [PATCH 6/9] Doc/DT: Add DT binding documentation for MIPI DSI CM Panel   Tomi Valkeinen
• [PATCH 7/9] Doc/DT: Add DT binding documentation for Sony acx565akm panel   Tomi Valkeinen
• [PATCH 8/9] Doc/DT: Add DT binding documentation for TFP410 encoder   Tomi Valkeinen
• [PATCH 9/9] Doc/DT: Add DT binding documentation for tpd12s015 encoder   Tomi Valkeinen
• [PATCH 0/9] Doc/DT: DT bindings for various display components   Tomi Valkeinen
• [PATCH 7/9] Doc/DT: Add DT binding documentation for Sony acx565akm panel   Tomi Valkeinen
• [PATCH 0/9] Doc/DT: DT bindings for various display components   Tomi Valkeinen
• [PATCH 3/9] Doc/DT: Add DT binding documentation for DVI Connector   Tomi Valkeinen
• [PATCH 4/9] Doc/DT: Add DT binding documentation for HDMI Connector   Tomi Valkeinen
• [PATCH 9/9] Doc/DT: Add DT binding documentation for tpd12s015 encoder   Tomi Valkeinen
• [PATCH 0/9] Doc/DT: DT bindings for various display components   Tomi Valkeinen
• [BISECTED] ssh - Received disconnect from x.x.x.x: 2: Bad packet length 3149594624   Kalle Valo
• [PATCH] ARM: dts: qcom: Add RNG device tree node   Stanimir Varbanov
• [PATCH] ARM: dts: qcom: Add RNG device tree node   Stanimir Varbanov
• [PATCH] hwrng: msm: switch Kconfig to ARCH_QCOM depends   Stanimir Varbanov
• [PATCH RESEND] ARM: dts: qcom-msm8974: Add RNG device tree node   Stanimir Varbanov
• [PATCH RESEND] ARM: dts: qcom-msm8960-cdp: Add RNG device tree node   Stanimir Varbanov
• [Patch v7 2/2] dmaengine: add Qualcomm BAM dma driver   Stanimir Varbanov
• imx-drm: screen flickering   Marek Vasut
• [PATCHv6] staging/iio/adc: change the MXS touchscreen driver implementation   Marek Vasut
• Freescale FEC packet loss   Marek Vasut
• [PATCH 1/3] crypto: Fix the pointer voodoo in unaligned ahash   Marek Vasut
• [PATCH] PCI: imx6: Fix link_up detection   Marek Vasut
• [PATCH] PCI: imx6: Fix link_up detection   Marek Vasut
• [PATCH] ARM: dts: mxs: Fix the RTC compatible prop on M28EVK   Marek Vasut
• [PATCH] ARM: dts: mxs: Fix the RTC compatible prop on M28EVK   Marek Vasut
• [RFC 0/3] ahci_platform: drop support for a bunch of obsolete platform device types   Marek Vasut
• [PATCH] ARM: dts: mxs: Fix the RTC compatible prop on M28EVK   Marek Vasut
• [PATCH 1/3] i2c: add DMA support for freescale i2c driver   Marek Vasut
• [PATCH 1/3] i2c: add DMA support for freescale i2c driver   Marek Vasut
• [PATCH 1/3] i2c: add DMA support for freescale i2c driver   Marek Vasut
• [PATCH 1/3] PCI: designware: add legacy PCI interrupt mapping   Marek Vasut
• [RFC PATCH 0/3] PCI: imx6: fixup for add-in card IRQ mismapping   Marek Vasut
• [PATCH] ARM: dts: imx: Add alias for ethernet controller   Marek Vasut
• [PATCH 1/3] i2c: add DMA support for freescale i2c driver   Marek Vasut
• [PATCH 1/3] i2c: add DMA support for freescale i2c driver   Marek Vasut
• [PATCH 0/3] ARM: dts: Fixes for Overo/Tobi against 3.14-rc1   Florian Vaussard
• [PATCH 1/3] ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo   Florian Vaussard
• [PATCH 2/3] ARM: dts: omap3-tobi: Use the correct vendor prefix   Florian Vaussard
• [PATCH 3/3] ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi   Florian Vaussard
• [PATCH 3/3] ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi   Florian Vaussard
• [PATCH 0/3] ARM: dts: Fixes for Overo/Tobi against 3.14-rc1   Florian Vaussard
• [PATCH v2 0/4] ARM: dts: Fixes for Overo/Tobi against 3.14-rc2   Florian Vaussard
• [PATCH v2 1/4] ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo   Florian Vaussard
• [PATCH v2 2/4] ARM: dts: omap3-tobi: Use the correct vendor prefix   Florian Vaussard
• [PATCH v2 3/4] ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi   Florian Vaussard
• [PATCH v2 4/4] Documentation: dt: OMAP: Update Overo/Tobi   Florian Vaussard
• [PATCH v2 4/4] Documentation: dt: OMAP: Update Overo/Tobi   Florian Vaussard
• [PATCH 0/2] ARM: OMAP4: Fix gpmc_fck clock   Florian Vaussard
• [PATCH 1/2] CLK: TI: OMAP4: Remove gpmc_fck from dummy clocks   Florian Vaussard
• [PATCH 2/2] ARM: DTS: OMAP4: Add gpmc_fck clock node   Florian Vaussard
• [PATCH 2/2] ARM: DTS: OMAP4: Add gpmc_fck clock node   Florian Vaussard
• [PATCH 2/2] ARM: DTS: OMAP4: Add gpmc_fck clock node   Florian Vaussard
• [PATCH v2 0/2] ARM: OMAP4: Fix gpmc_fck clock   Florian Vaussard
• [PATCH v2 1/2] CLK: TI: OMAP4: Remove gpmc_fck from dummy clocks   Florian Vaussard
• [PATCH v2 2/2] ARM: DTS: OMAP4: Use l3_ick for the gpmc node   Florian Vaussard
• [PATCH v2 0/2] ARM: OMAP4: Fix gpmc_fck clock   Florian Vaussard
• [PATCH v2 0/2] ARM: OMAP4: Fix gpmc_fck clock   Florian Vaussard
• [PATCH v2 0/2] ARM: OMAP4: Fix gpmc_fck clock   Florian Vaussard
• [PATCHv2 03/16] Documentation: dt: add OMAP iommu bindings   Florian Vaussard
• [PATCH 0/2] ARM: dts: OMAP4: Add support for DuoVero/Parlor   Florian Vaussard
• [PATCH 1/2] ARM: dts: Add support for OMAP4 Gumstix DuoVero/Parlor   Florian Vaussard
• [PATCH 2/2] ARM: dts: duovero-parlor: Add HDMI output   Florian Vaussard
• [PATCH 2/2] ARM: dts: duovero-parlor: Add HDMI output   Florian Vaussard
• [PATCH v2 0/2] ARM: OMAP4: Fix gpmc_fck clock   Florian Vaussard
• TWL6040 fails to initialize   Florian Vaussard
• [PATCH 2/2] ARM: dts: duovero-parlor: Add HDMI output   Florian Vaussard
• TWL6040 fails to initialize   Florian Vaussard
• [PATCH v2 0/2] ARM: OMAP4: Fix gpmc_fck clock   Florian Vaussard
• TWL6040 fails to initialize   Florian Vaussard
• TWL6040 fails to initialize   Florian Vaussard
• [PATCH v3 0/2] ARM: OMAP4+: Fix gpmc_fck clock   Florian Vaussard
• [PATCH v3 1/2] CLK: TI: OMAP4/5/DRA7: Remove gpmc_fck from dummy clocks   Florian Vaussard
• [PATCH v3 2/2] ARM: DTS: OMAP4/5: Use l3_ick for the gpmc node   Florian Vaussard
• [PATCHv2 14/16] ARM: OMAP3: hwmod data: cleanup data for IOMMUs   Florian Vaussard
• TWL6040 fails to initialize   Florian Vaussard
• [PATCH 0/8] OMAP: OMAP3 DSS related clock patches   Florian Vaussard
• [PATCH v2 0/8] ARM: dts: Better support for Gumstix Overo   Florian Vaussard
• [PATCH v2 1/8] ARM: dts: omap3-tobi: Add missing pinctrl   Florian Vaussard
• [PATCH v2 2/8] ARM: dts: omap3-overo: Add missing pinctrl   Florian Vaussard
• [PATCH v2 3/8] ARM: dts: omap3-overo: Use complete poweroff   Florian Vaussard
• [PATCH v2 4/8] ARM: dts: omap3-overo: Enable WiFi/BT combo   Florian Vaussard
• [PATCH v2 5/8] ARM: dts: omap3-overo: Add HSUSB PHY   Florian Vaussard
• [PATCH v2 6/8] ARM: dts: omap: Add common file for SMSC9221   Florian Vaussard
• [PATCH v2 7/8] ARM: dts: omap3-tobi: Use include file omap-gpmc-smsc9221   Florian Vaussard
• [PATCH v2 8/8] ARM: dts: omap3-tobi: Add AT24C01 EEPROM   Florian Vaussard
• [PATCH v2 3/8] ARM: dts: omap3-overo: Use complete poweroff   Florian Vaussard
• [PATCH 1/2] [media] v4l2: Add settings for Horizontal and Vertical MV Search Range   Hans Verkuil
• [PATCH RFC 26/46] drivers/base: provide an infrastructure for componentised subsystems   Daniel Vetter
• [BUG] Circular locking dependency - DRM/CMA/MM/hotplug/...   Daniel Vetter
• [BUG] Circular locking dependency - DRM/CMA/MM/hotplug/...   Daniel Vetter
• [PATCH v5 15/16] ARM: add uprobes support   Rabin Vincent
• [PATCH 0/3] ARM: OMAP2+: AM43x: Enable in OMAP2PLUS and add ID for ES1.1   Lokesh Vutla
• [PATCH 0/3] ARM: OMAP2+: AM43x: Enable in OMAP2PLUS and add ID for ES1.1   Lokesh Vutla
• [PATCH 1/3] ARM: OMAP2+: AM43x: Enable in default config   Lokesh Vutla
• [PATCH 2/3] ARM: OMAP2+: AM43x: Add ID for ES1.1   Lokesh Vutla
• [PATCH 3/3] ARM: OMAP2+: AM43x: Use gptimer as clocksource   Lokesh Vutla
• [PATCH 2/3] ARM: OMAP2+: AM43x: Add ID for ES1.1   Lokesh Vutla
• [PATCH V2 0/4] ARM: OMAP2+: AM43x: Enable in OMAP2PLUS and add ID for ES1.1   Lokesh Vutla
• [PATCH V2 1/4] ARM: OMAP2+: AM43x: enable in default config   Lokesh Vutla
• [PATCH V2 2/4] ARM: OMAP2+: AM43x: Add ID for ES1.1   Lokesh Vutla
• [PATCH V2 3/4] ARM: OMAP2+: AM43x: determine features   Lokesh Vutla
• [PATCH V2 4/4] ARM: OMAP2+: AM43x: Use gptimer as clocksource   Lokesh Vutla
• [PATCH 1/1] ARM: OMAP5: Fix reboot handling   Lokesh Vutla
• [PATCH] ARM: OMAP2+: AM43xx: implement support for machine restart   Lokesh Vutla
• [PATCH V2 4/4] ARM: OMAP2+: AM43x: Use gptimer as clocksource   Lokesh Vutla
• [PATCH] crypto: tegra: remove driver   Varun Wadekar
• [PATCH v4] ARM/serial: at91: switch atmel serial to use gpiolib   Linus Walleij
• [PATCH 1/5] irqchip: vic: update the base IRQ member correctly   Linus Walleij
• [PATCH 2/5] irqchip: support cascaded VICs   Linus Walleij
• [PATCH 4/5] clk: versatile: pass a parent to the ICST clock   Linus Walleij
• [PATCH 5/5 v2] clk: versatile: respect parent rate in ICST clock   Linus Walleij
• [PATCH 2/3 RESEND] mfd: tc3589x: Reform device tree probing   Linus Walleij
• [PATCH] ARM: pxa: fix compilation problem on AM300EPD board   Linus Walleij
• [PATCH] ARM: pxa: fix various compilation problems   Linus Walleij
• [PATCH] backlight: add PWM dependencies   Linus Walleij
• [PATCH] ARM: pxa: fix various compilation problems   Linus Walleij
• [PATCH 01/10] ARM: ux500: move AB8500 GPIOs to device tree   Linus Walleij
• [PATCH 02/10] ARM: ux500: move AB8500 YCBCR settings to device tree   Linus Walleij
• [PATCH 03/10] ARM: ux500: move AB8500 PWM out settings to device tree   Linus Walleij
• [PATCH 04/10] ARM: ux500: move AB8500 audio interface 1 settings to DT   Linus Walleij
• [PATCH 05/10] ARM: ux500: move AB8500 USB UICC settings to DT   Linus Walleij
• [PATCH 06/10] ARM: ux500: move AB8500 DMIC settings to DT   Linus Walleij
• [PATCH 07/10] ARM: ux500: move AB8500 EXTCPENA from board file to DT   Linus Walleij
• [PATCH 08/10] ARM: ux500: move AB8500 modem I2C settings to DT   Linus Walleij
• [PATCH 09/10] ARM: ux500: move AB8500 clock out pins to DT   Linus Walleij
• [PATCH 10/10] ARM: ux500: move last AB8505 set-up to DT   Linus Walleij
• [PATCH] ARM: ux500: disable msp2 device tree node   Linus Walleij
• [PATCH] pinctrl: single: add low powr mode support   Linus Walleij
• [PATCH 1/2] pinctrl: sirf: add pin group for USP0 with only RX or TX frame sync for atlas6   Linus Walleij
• [PATCH 2/2] ARM: dts: sirf: add pin group for USP0 with only RX or TX frame sync for atlas6   Linus Walleij
• [PATCH 2/4] pinctrl: st: add stid127 support   Linus Walleij
• [PATCH] backlight: add PWM dependencies   Linus Walleij
• [PATCH 05/17] mmc: mmci: Put the device into low power state at system suspend   Linus Walleij
• [PATCH 10/17] spi: pl022: Remove redundant pinctrl to default state in probe   Linus Walleij
• [PATCH 11/17] i2c: nomadik: Convert to devm functions   Linus Walleij
• [PATCH 14/17] i2c: nomadik: Fixup deployment of runtime PM   Linus Walleij
• [PATCH] backlight: add PWM dependencies   Linus Walleij
• [PATCH v4] gpio: davinci: reuse for keystone soc   Linus Walleij
• [PATCH] mmc: mmci: rename some extended flags   Linus Walleij
• [PATCH 02/03] pinctrl: sh-pfc: r8a7790: Break out USB0 OVC/VBUS   Linus Walleij
• [PATCH 02/03] pinctrl: sh-pfc: r8a7790: Break out USB0 OVC/VBUS   Linus Walleij
• [PATCH] pinctrl:at91:add drive strength configuration   Linus Walleij
• [PATCH v3 06/15] at91: dt: at91sam9261ek: Adds DT entries for the 4 user buttons   Linus Walleij
• [PATCH] backlight: add PWM dependencies   Linus Walleij
• [GIT PULL] Ux500 AB8500 DT conversion   Linus Walleij
• [PATCH] ARM: ux500: drop a chunk of GPIO definitions   Linus Walleij
• [PATCH] ARM: ux500: drop DMA channel platform data for storage   Linus Walleij
• [PATCH] ARM: ux500: disable msp2 device tree node   Linus Walleij
• [PATCH v4] gpio: davinci: reuse for keystone soc   Linus Walleij
• [PATCH] gpio: mvebu: use chained_irq_{enter, exit} for GIC compatibility   Linus Walleij
• [PATCH 15/17] i2c: i2c-stu300: deprecate class based instantiation   Linus Walleij
• [PATCH 10/17] i2c: i2c-nomadik: deprecate class based instantiation   Linus Walleij
• [GIT PULL] integrator base patches for v3.15   Linus Walleij
• [PATCH 3/7] Documentation: devicetree: fix up pl022 clocks   Linus Walleij
• [PATCH 06/12] mfd: vexpress-sysreg: Add labels to gpio banks   Linus Walleij
• [PATCH 0/6] ARM: integrator: multiplatform advancements   Linus Walleij
• [PATCH 1/6] ARM: integrator: localize the lm.h header   Linus Walleij
• [PATCH 2/6] ARM: integrator: localize the impd1.h header   Linus Walleij
• [PATCH 3/6] ARM: integrator: merge platform.h to hardware.h   Linus Walleij
• [PATCH 4/6] ARM: integrator: localize the hardware.h header   Linus Walleij
• [PATCH 5/6] ARM: integrator: register sched_clock directly   Linus Walleij
• [PATCH 6/6] RFC: ARM: integrator: get rid of <mach/memory.h>   Linus Walleij
• [PATCH v2 1/9] ARM: centralize common multi-platform kconfig options   Linus Walleij
• [PATCH 2/9] ARM: select HAVE_SMP for V7 multi-platform   Linus Walleij
• [PATCH 0/6] ARM: integrator: multiplatform advancements   Linus Walleij
• [PATCH v2 1/9] ARM: centralize common multi-platform kconfig options   Linus Walleij
• [PATCH 1/2] pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 375   Linus Walleij
• [PATCH 2/2] pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 380/385   Linus Walleij
• [PATCH 1/2] pinctrl: nomadik: Silence compiler warn for !CONFIG_PM   Linus Walleij
• [PATCH 2/2] pinctrl: nomadik: Convert to modern pm_ops   Linus Walleij
• [PATCH] pinctrl: sirf: update copyright years to 2014   Linus Walleij
• [PATCH v4 01/16] pinctrl: mvebu: count unnamed controls and allocate name buffer   Linus Walleij
• [PATCH v4 02/16] pinctrl: mvebu: remove obsolete per-control name buffer allocation   Linus Walleij
• [PATCH v4 03/16] pinctrl: mvebu: identify generic controls by name   Linus Walleij
• [PATCH v4 04/16] pinctrl: mvebu: remove passing mvebu_mpp_ctrl to callbacks   Linus Walleij
• [PATCH v4 05/16] pinctrl: mvebu: add common mpp reg helper to mvebu pinctrl include   Linus Walleij
• [PATCH 00/10] pinctrl: mvebu: remove hard-coded addresses from Dove pinctrl   Linus Walleij
• [PATCH v4 00/16] pinctrl: mvebu: restructure resource allocation   Linus Walleij
• [PATCH 0/2] Marvell Armada 375 and 38x pinctrl drivers   Linus Walleij
• [PATCH 00/10] pinctrl: mvebu: remove hard-coded addresses from Dove pinctrl   Linus Walleij
• [GIT PULL] integrator base patches for v3.15   Linus Walleij
• [PATCH 4/7] spi: pl022: attempt to get sspclk by name   Linus Walleij
• [PATCH 1/2] ARM: ux500: switch SSP/SPI clock name to "SSPCLK"   Linus Walleij
• [PATCH 2/2] ARM: u300: switch SSP/SPI clock name to "SSPCLK"   Linus Walleij
• [PATCH v4 2/8] at91: pinctrl: don't request GPIOs used for interrupts but lock them as IRQ   Linus Walleij
• [PATCH] pinctrl: sunxi: use chained_irq_{enter, exit} for GIC compatibility   Linus Walleij
• [PATCH v3 5/7] ARM: at91: gpio: implement get_direction   Linus Walleij
• [PATCH v3 6/7] pinctrl: at91: implement get_direction   Linus Walleij
• [PATCH 03/17] mmc: mmci: Mask IRQs for all variants during runtime suspend   Linus Walleij
• [PATCH 1/4] pinctrl-sunxi: Fix sun5i-a13 port F multiplexing   Linus Walleij
• [PATCH 2/4] pinctrl-sunxi: Fix hang on gpio irq   Linus Walleij
• [PATCH 3/4] pinctrl-sunxi: Fix masking when setting irq type   Linus Walleij
• [PATCH 4/4] pinctrl-sunxi: Fix interrupt register offset calculation   Linus Walleij
• [PATCH] pinctrl: add pinctrl driver for imx6sx   Linus Walleij
• [PATCH] pinctrl: imx: Fix pin name in debug message.   Linus Walleij
• [PATCH 01/11] ARM: shmobile: r8a7791 dtsi: Fix typo in msiof2 clock output name   Linus Walleij
• [PATCH v3 6/7] pinctrl: at91: implement get_direction   Linus Walleij
• [PATCH 00/10] pinctrl: mvebu: remove hard-coded addresses from Dove pinctrl   Linus Walleij
• [PATCH] clk: nomadik: fix multiplatform problem   Linus Walleij
• SA110 MMU problem, any hints?   Linus Walleij
• [PATCH 00/10] pinctrl: mvebu: remove hard-coded addresses from Dove pinctrl   Linus Walleij
• [GIT PULL] Integrator multiplatform patches, take two   Linus Walleij
• [PATCH] gpio: only enable kona driver on BCM_MOBILE or for compile testing   Linus Walleij
• [PATCH] gpio: msm: switch Kconfig to ARCH_QCOM depends   Linus Walleij
• [PATCH 1/3] ARM: plat-versatile: convert LEDs to platform device   Linus Walleij
• [PATCH 2/3] ARM/leds: move ARM Versatile LED driver to leds subsystem   Linus Walleij
• [PATCH 3/3] ARM: plat-versatile: update defconfigs for Versatile LEDs   Linus Walleij
• [PATCH] ARM: ux500: delete pointless DT config option   Linus Walleij
• [PATCH] ARM: ux500: skip GIC CPU and dist address checks   Linus Walleij
• OMAP baseline test results for v3.13   Paul Walmsley
• OMAP baseline test results for v3.14-rc1   Paul Walmsley
• OMAP baseline test results for v3.14-rc1   Paul Walmsley
• OMAP baseline test results for v3.14-rc2   Paul Walmsley
• OMAP baseline test results for v3.14-rc3   Paul Walmsley
• [PATCH 1/1] ARM: OMAP5: Fix reboot handling   Paul Walmsley
• [PATCH 1/1] ARM: OMAP5: Fix reboot handling   Paul Walmsley
• [PATCH] ARM: OMAP2+: AM43xx: implement support for machine restart   Paul Walmsley
• [PATCH] ARM: OMAP4: hwmod: Fix SOFTRESET logic for OMAP4   Paul Walmsley
• [RFC PATCH] ARM: OMAP2+: clockdomain: Reintroduce SW_SLEEP Support (fwd)   Paul Walmsley
• [PATCH] ARM: DRA7: hwmod data: correct the sysc data for spinlock   Paul Walmsley
• [PATCH] ARM: AM43x: hwmod data: register spinlock OCP interface   Paul Walmsley
• [PATCH] ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT   Paul Walmsley
• [RFC PATCH] ARM: OMAP2+: clockdomain: Reintroduce SW_SLEEP Support (fwd)   Paul Walmsley
• [PATCH 1/2] ARM: OMAP2+: fix rate prints   Paul Walmsley
• [PATCH 2/2] ARM: OMAP2+: fix dpll round_rate() to actually round   Paul Walmsley
• [RFC PATCH] ARM: OMAP2+: clockdomain: Reintroduce SW_SLEEP Support (fwd)   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: clock/PRCM/hwmod fixes for v3.14-rc   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: clock/PRCM/hwmod fixes for v3.14-rc   Paul Walmsley
• [PATCH] ARM: OMAP3+: DPLL: stop reparenting to same parent if already done   Paul Walmsley
• [PATCH 2/2] ARM: OMAP2+: fix dpll round_rate() to actually round   Paul Walmsley
• OMAP baseline test results for v3.14-rc4   Paul Walmsley
• Tegra baseline test results for v3.14-rc1   Paul Walmsley
• Tegra baseline test results for v3.14-rc2   Paul Walmsley
• Tegra baseline test results for v3.14-rc3   Paul Walmsley
• Tegra baseline test results for v3.14-rc4   Paul Walmsley
• [PATCHv2 08/16] ARM: OMAP3: remove deprecated CONFIG_OMAP_IOMMU_IVA2   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: PRCM/hwmod/clock non-regression fixes and optimizations for v3.15   Paul Walmsley
• change kmalloc into vmalloc for large memory allocations   Wang, Yalin
• change kmalloc into vmalloc for large memory allocations   Wang, Yalin
• [PATCH 2/2] clocksource: Make clocksource register functions void   Yijing Wang
• [Update][PATCH 1/2] clocksource: Remove outdated comments   Yijing Wang
• [Update][PATCH 2/2] clocksource: Make clocksource register functions void   Yijing Wang
• [PATCH] arm64: Add architecture support for PCI   Yijing Wang
• [PATCH 5/5] ARM: tegra: cpuidle: use firmware call for power down   Stephen Warren
• [PATCH 2/2] ARM: tegra: paz00: Add LVDS support to device tree   Stephen Warren
• [PATCH] ARM: tegra: Properly sort clocks property   Stephen Warren
• [PATCH] ARM: tegra: document which Dalmore revisions are supported   Stephen Warren
• [PATCH] ARM: tegra: add system-power-controller property for PMIC node   Stephen Warren
• [PATCH] ARM: config: enable ams AS3722 power reset driver   Stephen Warren
• [PATCH V2 1/2] ARM: tegra: enable LCD panel on Seaboard   Stephen Warren
• [PATCH V2 2/2] ARM: tegra: enable LCD panel on Ventana   Stephen Warren
• [PATCH v3 2/6] ARM: tegra: Add chipid, revision and fuse init   Stephen Warren
• [PATCH v3 4/6] ARM: tegra: Add efuse bindings   Stephen Warren
• [PATCH v3 5/6] misc: enable fuse drivers   Stephen Warren
• [PATCH v3 6/6] ARM: tegra: remove fuse files from mach-tegra   Stephen Warren
• [PATCH v3 0/6] efuse driver for Tegra   Stephen Warren
• [PATCH v3 3/6] misc: fuse: Add efuse driver for Tegra   Stephen Warren
• [PATCH v3 3/6] misc: fuse: Add efuse driver for Tegra   Stephen Warren
• [PATCH] ARM: tegra: enable I2C MUX PCA954x   Stephen Warren
• [PATCH 1/2] ARM: bcm2835: fix DT node sort order   Stephen Warren
• [PATCH 2/2] ARM: bcm2835: add unit address to all nodes w/ reg prop   Stephen Warren
• [patch] initial perf_event support for Raspberry-Pi   Stephen Warren
• [PATCH 1/2] BCM2835: Add dmaengine driver to device tree   Stephen Warren
• [PATCH 1/2] ARM: bcm2835: fix DT node sort order   Stephen Warren
• [PATCH 1/2] ARM: tegra: enable I2C Mux driver for PCA9546 in defconfig   Stephen Warren
• [PATCH] ARM: tegra: don't timeout if CPU is powergated   Stephen Warren
• [PATCH] ARM: tegra: dalmore: fix irq trigger type   Stephen Warren
• [PATCH v2 0/6] ARM: firmware: improvements to Trusted Foundations support   Stephen Warren
• [PATCH 1/2] ARM: tegra: enable I2C Mux driver for PCA9546 in defconfig   Stephen Warren
• [PATCH 3/9] ARM: select MIGHT_HAVE_CACHE_L2X0 for V7 multi-platform   Stephen Warren
• [PATCH v2 0/9] ARM: multi-platform kconfig cleanup and mach-virt removal   Stephen Warren
• [PATCH 1/2] ARM: tegra: enable I2C Mux driver for PCA9546 in defconfig   Stephen Warren
• [PATCH 1/2] ARM: tegra: enable I2C Mux driver for PCA9546 in defconfig   Stephen Warren
• [PATCH] ARM: tegra: dalmore: fix irq trigger type   Stephen Warren
• [PATCH v2 0/9] ARM: multi-platform kconfig cleanup and mach-virt removal   Stephen Warren
• [PATCH] ARM: tegra: don't timeout if CPU is powergated   Stephen Warren
• [PATCH v2 4/6] ARM: firmware: add prepare_idle() operation   Stephen Warren
• [PATCH] ARM: tegra: fix RTC0 alias for Cardhu   Stephen Warren
• [PATCH 2/2] ARM: bcm2835: add unit address to all nodes w/ reg prop   Stephen Warren
• [PATCH V2] ARM: bcm2835: node name unit address cleanup   Stephen Warren
• [PATCH 1/2] clk: fixed-rate: use full DT node name   Stephen Warren
• [PATCH 2/2] ARM: bcm2835: fix clock DT node names   Stephen Warren
• [PATCH 1/2] clk: fixed-rate: use full DT node name   Stephen Warren
• [PATCH 1/2] clk: fixed-rate: use full DT node name   Stephen Warren
• [PATCH 1/2] mfd: palmas: support IRQ inversion at the board level   Stephen Warren
• [PATCH 2/2] ARM: tegra: fix Dalmore PMIC IRQ polarity   Stephen Warren
• [PATCH V2] ARM: bcm2835: node name unit address cleanup   Stephen Warren
• [PATCH 1/2] clk: fixed-rate: use full DT node name   Stephen Warren
• [PATCH 1/2] mfd: palmas: support IRQ inversion at the board level   Stephen Warren
• [PATCH v2 0/6] ARM: firmware: improvements to Trusted Foundations support   Stephen Warren
• [PATCH] ARM: tegra: remove tegra EMC scaling driver   Stephen Warren
• [PATCH] crypto: tegra: remove driver   Stephen Warren
• [PATCH] ARM: tegra: add SPI flash to Venice2 DT   Stephen Warren
• [PATCH] ARM: tegra: Add head numbers to display controllers   Stephen Warren
• [PATCH] ARM: tegra: only run PL310 init on systems with one   Stephen Warren
• [PATCH] ARM: tegra: add SPI flash to Venice2 DT   Stephen Warren
• [PATCH RFC 31/31] mmc: sdhci-tegra: get rid of special PRESENT_STATE register handling   Stephen Warren
• I2C dummy adapter driver ?   Stephen Warren
• [PATCH] clk: tegra124: remove gr2d and gr3d clocks   Stephen Warren
• [PATCH] clk: tegra: Fix vic03 mux index   Stephen Warren
• [PATCH] ARM: tegra: add LED options back into tegra_defconfig   Stephen Warren
• [PATCH] ARM: bcm2835: Move to mach-bcm directory   Stephen Warren
• [PATCH] ARM: bcm2835: fix defconfig to select ARCH_BCM   Stephen Warren
• [PATCH V2] ARM: bcm2835: fix clock DT node names   Stephen Warren
• [PATCH] ARM: bcm2835: Move to mach-bcm directory   Stephen Warren
• [PATCH] ARM: tegra: add device tree for SHIELD   Stephen Warren
• [PATCH V2] ARM: bcm2835: fix clock DT node names   Stephen Warren
• [PATCH] ARM: bcm2835: Move to mach-bcm directory   Stephen Warren
• [PATCH] ARM: bcm2835: fix defconfig to select ARCH_BCM   Stephen Warren
• [PATCH] ARM: tegra: remove tegra EMC scaling driver   Stephen Warren
• [PATCH] ARM: tegra: add device tree for SHIELD   Stephen Warren
• [PATCHv2 1/5] ARM: tegra: remove obsolete gpio entries   Stephen Warren
• [PATCHv2 3/5] net: rfkill: gpio: remove gpio names   Stephen Warren
• [PATCH] ARM: tegra: add device tree for SHIELD   Stephen Warren
• [PATCH] ARM: tegra: only run PL310 init on systems with one   Stephen Warren
• [PATCH V2 1/3] dt: palmas: support IRQ inversion at the board level   Stephen Warren
• [PATCH V2 2/3] mfd: palmas: support IRQ inversion at the board level   Stephen Warren
• [PATCH V2 3/3] ARM: tegra: fix Dalmore PMIC IRQ polarity   Stephen Warren
• [PATCH V2 1/3] dt: palmas: support IRQ inversion at the board level   Stephen Warren
• [PATCH V2 1/3] dt: palmas: support IRQ inversion at the board level   Stephen Warren
• [PATCH 1/7] ARM: dts: tegra: add PCIe interrupt mapping properties   Stephen Warren
• How to select between different display timings? (was: [PATCH 7/8] ARM: dts: tx28: restructure and update DTS file)   Lothar Waßmann
• [PATCH 1/1] imx-drm: imx-drm-core: fix the build warning   Lothar Waßmann
• [PATCHv7][ 4/7] staging: imx-drm: Use de-active and pixelclk-active display-timings.   Lothar Waßmann
• [PATCH 1/3] i2c: add DMA support for freescale i2c driver   Lothar Waßmann
• Rogue low pulse on TXD created by amba-pl011.c during startup   Lothar Waßmann
• UBI leb_write_unlock NULL pointer Oops (continuation) on ARM926   Richard Weinberger
• [PATCH 12/28] Remove GENERIC_TIME   Richard Weinberger
• [PATCH 13/28] Remove S3C24XX_GPIO_EXTRA64   Richard Weinberger
• [PATCH 14/28] Remove MACH_SMDKC210   Richard Weinberger
• [PATCH 22/28] Remove S3C24XX_GPIO_EXTRA128   Richard Weinberger
• [PATCH 25/28] Remove MACH_SMDKV310   Richard Weinberger
• [PATCH 26/28] Remove LOCAL_TIMERS   Richard Weinberger
• [PATCH 28/28] Remove LOCAL_TIMERS   Richard Weinberger
• [PATCH 12/28] Remove GENERIC_TIME   Richard Weinberger
• [Xen-devel] [PATCH v9 0/5] xen/arm/arm64: CONFIG_PARAVIRT and stolen ticks accounting   Konrad Rzeszutek Wilk
• [PATCH] dma: mv_xor: Silence a bunch of LPAE-related warnings   Dan Williams
• [PATCH] dma: mv_xor: Silence a bunch of LPAE-related warnings   Dan Williams
• [PATCH v5 4/5] ARM: Kirkwood: Fix qnap vendor prefix   David Woodhouse
• [PATCH] ARM: tegra: enable I2C MUX PCA954x   Bryan Wu
• [PATCH] ARM: tegra: enable I2C MUX PCA954x   Bryan Wu
• [PATCH 1/2] ARM: tegra: enable I2C Mux driver for PCA9546 in defconfig   Bryan Wu
• [PATCH 2/2] ARM: tegra: enable PCA9546 on Cardhu   Bryan Wu
• [PATCH 1/2] ARM: tegra: enable I2C Mux driver for PCA9546 in defconfig   Bryan Wu
• [PATCH 1/2] ARM: tegra: enable I2C Mux driver for PCA9546 in defconfig   Bryan Wu
• [PATCH 1/2] ARM: tegra: enable I2C Mux driver for PCA9546 in defconfig   Bryan Wu
• [PATCH 1/2] ARM: tegra: enable I2C Mux driver for PCA9546 in defconfig   Bryan Wu
• [PATCH] ARM: mm: support big-endian page tables   Jianguo Wu
• [PATCH] ARM: mm: support big-endian page tables   Jianguo Wu
• [PATCH] ARM: mm: support big-endian page tables   Jianguo Wu
• [PATCH v2] ARM: mm: support big-endian page tables   Jianguo Wu
• [PATCH v5 2/5] ACPI / processor_core: Rework _PDC related stuff to make it more arch-independent   Rafael J. Wysocki
• [Linaro-acpi] [PATCH v4 5/5] ACPI: Replace printk with pr_* in tables.c   Rafael J. Wysocki
• [PATCH v5 2/5] ACPI / processor_core: Rework _PDC related stuff to make it more arch-independent   Rafael J. Wysocki
• [Linaro-acpi] [PATCH v4 5/5] ACPI: Replace printk with pr_* in tables.c   Rafael J. Wysocki
• [PATCH v5 2/5] ACPI / processor_core: Rework _PDC related stuff to make it more arch-independent   Rafael J. Wysocki
• [PATCH] cpufreq: Set policy to non-NULL only after all hotplug online work is done   Rafael J. Wysocki
• [PATCH] cpufreq: Set policy to non-NULL only after all hotplug online work is done   Rafael J. Wysocki
• [PATCH v3 1/3] Fix hibernation restore hang in freeze_processes   Rafael J. Wysocki
• [PATCH 0/8] PM / Sleep / Runtime: Fixup some driver's system suspend   Rafael J. Wysocki
• [PATCH V3 1/8] PM / Runtime: Fetch runtime PM callbacks using a macro   Rafael J. Wysocki
• [PATCH v3 1/3] cpufreq: stats: Remove redundant cpufreq_cpu_get() call   Rafael J. Wysocki
• [PATCH 0/3] clk: mmp: bug fix for clk-frac   Chao Xie
• IPI_WAKEUP for arm64   Chao Xie
• [patch 09/26] arm: mmp: Remove pointless fiddling with irq internals   Chao Xie
• [patch 09/26] arm: mmp: Remove pointless fiddling with irq internals   Chao Xie
• [PATCH 1/3] crypto: Fix the pointer voodoo in unaligned ahash   Herbert Xu
• [PATCH] dcp: aes: Move the AES operation type from actx to rctx   Herbert Xu
• [PATCH v3] hwrng: msm: switch Kconfig to ARCH_QCOM depends   Herbert Xu
• [RFC PATCH] arm64: add support for AES in CCM mode using Crypto Extensions   Herbert Xu
• [RFC PATCH] arm64: add support for AES in CCM mode using Crypto Extensions   Herbert Xu
• [RFC PATCH] arm64: add support for AES in CCM mode using Crypto Extensions   Herbert Xu
• [PATCH] hwrng: msm: switch Kconfig to ARCH_QCOM depends   Herbert Xu
• [PATCH v2 0/2] Introduce omap-des driver for OMAP SoCs   Herbert Xu
• [PATCH] crypto: tegra: remove driver   Herbert Xu
• linux-next: manual merge of the crypto tree with the arm-soc tree   Herbert Xu
• [PATCH v5 0/3] serial: fsl_lpuart: add DMA support   Yuan Yao
• [PATCH v5 1/3] ARM: dts: vf610: lpuart: Add eDMA support   Yuan Yao
• [PATCH v5 2/3] serial: fsl_lpuart: add DMA support   Yuan Yao
• [PATCH v5 3/3] serial: fsl_lpuart: documented the clock requirement.   Yuan Yao
• [PATCH v6 0/3] serial: fsl_lpuart: add DMA support   Yuan Yao
• [PATCH v6 1/3] ARM: dts: vf610: lpuart: Add eDMA support   Yuan Yao
• [PATCH v6 2/3] serial: fsl_lpuart: add DMA support   Yuan Yao
• [PATCH v6 3/3] serial: fsl_lpuart: documented the clock requirement.   Yuan Yao
• [PATCH 0/3] i2c: add DMA support for freescale i2c driver   Yuan Yao
• [PATCH 1/3] i2c: add DMA support for freescale i2c driver   Yuan Yao
• [PATCH 3/3] Documentation:add DMA support for freescale i2c driver   Yuan Yao
• [PATCH 2/3] ARM: dts: vf610: i2c: Add eDMA support   Yuan Yao
• [PATCH v4 0/8] wilink: add device tree support   Yegor Yefremov
• pinctrl: pinctrl-single vs custom driver   Sherman Yin
• [PATCH] ARM: dts: i.MX51 babbage: Support diagnostic LED   Liu Ying
• [PATCH] ARM: dts: i.MX51 babbage: Support diagnostic LED   Liu Ying
• [PATCH] ARM: dts: i.MX51 babbage: Support diagnostic LED   Liu Ying
• [PATCH v2] ARM: dts: i.MX51 babbage: Support diagnostic LED   Liu Ying
• [PATCH] staging: drm/imx: remove an unnecessary local variable   Liu Ying
• [PATCH] staging: drm/imx: remove an unnecessary local variable   Liu Ying
• [PATCH] ARM: dts: imx6qdl-sabreauto: Support debug LED   Liu Ying
• [PATCH v4 0/3] serial: fsl_lpuart: add DMA support   Yao Yuan
• [PATCH v4 0/3] serial: fsl_lpuart: add DMA support   Yao Yuan
• [PATCH 1/3] i2c: add DMA support for freescale i2c driver   Yao Yuan
• [PATCH 1/3] i2c: add DMA support for freescale i2c driver   Yao Yuan
• [PATCH v7 0/7] ARM: rockchip: add smp functionality   Philipp Zabel
• [PATCH v2 0/6] ARM: STi reset controller support   Philipp Zabel
• [PATCH v4 1/5] clk: sunxi: Add support for USB clock-register reset bits   Philipp Zabel
• [PATCH] reset: Add generic GPIO reset driver.   Philipp Zabel
• [PATCH RFC v2 00/35] Second preview of imx-drm cleanup series   Philipp Zabel
• [RFC PATCH 2/3] staging: imx-drm-core: Use graph to find connection between crtc and encoder   Philipp Zabel
• [RFC PATCH 2/3] staging: imx-drm-core: Use graph to find connection between crtc and encoder   Philipp Zabel
• [RFC PATCH v2 0/4] imx-drm dt bindings   Philipp Zabel
• [RFC PATCH v2 1/4] staging: imx-drm: Add temporary copies of v4l2-of parsing functions   Philipp Zabel
• [RFC PATCH v2 2/4] staging: imx-drm-core: Use graph to find connection between crtc and encoder   Philipp Zabel
• [RFC PATCH v2 3/4] staging: imx-drm-core: associate crtc devices with di port nodes   Philipp Zabel
• [RFC PATCH v2 4/4] ARM: dts: imx6qdl: Add ports and endpoints to IPU DIs   Philipp Zabel
• [RFC PATCH 0/4] i.MX6 PU power domain support   Philipp Zabel
• [RFC PATCH 1/4] ARM: imx6: gpc: Add PU power domain for GPU/VPU   Philipp Zabel
• [RFC PATCH 2/4] ARM: imx6: gpc: Add pm clock support to PU power domain   Philipp Zabel
• [RFC PATCH 3/4] ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delay   Philipp Zabel
• [RFC PATCH 4/4] ARM: dts: imx6qdl: Add PU power-domain information to gpc node   Philipp Zabel
• [PATCH] reset: Add generic GPIO reset driver.   Philipp Zabel
• [RFC PATCH 1/4] ARM: imx6: gpc: Add PU power domain for GPU/VPU   Philipp Zabel
• [RFC PATCH 4/4] ARM: dts: imx6qdl: Add PU power-domain information to gpc node   Philipp Zabel
• [PATCH RFC v2 00/35] Second preview of imx-drm cleanup series   Philipp Zabel
• [PATCH v2 0/7] i.MX6 PU power domain support   Philipp Zabel
• [PATCH v2 1/7] Documentation: Add device tree bindings for Freescale i.MX GPC   Philipp Zabel
• [PATCH v2 2/7] ARM: imx6: gpc: Add PU power domain for GPU/VPU   Philipp Zabel
• [PATCH v2 3/7] ARM: imx6: gpc: Add pm clock support to PU power domain   Philipp Zabel
• [PATCH v2 4/7] ARM: imx6: gpc: Add observed worst case latencies   Philipp Zabel
• [PATCH v2 5/7] ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delay   Philipp Zabel
• [PATCH v2 6/7] ARM: dts: imx6qdl: Add power-domain information to gpc node   Philipp Zabel
• [PATCH v2 7/7] ARM: dts: imx6sl: Add power-domain information to gpc node   Philipp Zabel
• [PATCH v2 2/7] ARM: imx6: gpc: Add PU power domain for GPU/VPU   Philipp Zabel
• [PATCH] thermal: imx: update formula for thermal sensor   Philipp Zabel
• [PATCH v3 0/7] i.MX6 PU power domain support   Philipp Zabel
• [PATCH v3 1/7] Documentation: Add device tree bindings for Freescale i.MX GPC   Philipp Zabel
• [PATCH v3 2/7] ARM: imx6: gpc: Add PU power domain for GPU/VPU   Philipp Zabel
• [PATCH v3 3/7] ARM: imx6: gpc: Add pm clock support to PU power domain   Philipp Zabel
• [PATCH v3 4/7] ARM: imx6: gpc: Add observed worst case latencies   Philipp Zabel
• [PATCH v3 5/7] ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delay   Philipp Zabel
• [PATCH v3 6/7] ARM: dts: imx6qdl: Add power-domain information to gpc node   Philipp Zabel
• [PATCH v3 7/7] ARM: dts: imx6sl: Add power-domain information to gpc node   Philipp Zabel
• [PATCH v3 1/7] Documentation: Add device tree bindings for Freescale i.MX GPC   Philipp Zabel
• [RFC PATCH v3 0/9] imx-drm dt bindings   Philipp Zabel
• [RFC PATCH v3 1/9] staging: imx-drm-core: don't request probe deferral in imx_drm_encoder_parse_of   Philipp Zabel
• [RFC PATCH v3 2/9] staging: imx-drm: Add temporary copies of v4l2-of parsing functions   Philipp Zabel
• [RFC PATCH v3 3/9] staging: imx-drm-core: Use OF graph to find components and connections between encoder and crtcs   Philipp Zabel
• [RFC PATCH v3 4/9] staging: imx-drm: Document updated imx-drm device tree bindings   Philipp Zabel
• [RFC PATCH v3 5/9] staging: imx-drm: Document imx-hdmi device tree bindings   Philipp Zabel
• [RFC PATCH v3 6/9] ARM: dts: imx51: Add IPU ports and endpoints, move imx-drm node to dtsi   Philipp Zabel
• [RFC PATCH v3 7/9] ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to dtsi   Philipp Zabel
• [RFC PATCH v3 8/9] ARM: dts: imx6qdl: Add IPU DI ports and endpoints, move imx-drm node to dtsi   Philipp Zabel
• [RFC PATCH v3 9/9] staging: imx-drm: Update TODO   Philipp Zabel
• [PATCH RFC v2 00/35] Second preview of imx-drm cleanup series   Philipp Zabel
• [GIT PULL] Reset controller fixes and updates   Philipp Zabel
• [PATCH v4 0/7] i.MX6 PU power domain support   Philipp Zabel
• [PATCH v4 1/7] Documentation: Add device tree bindings for Freescale i.MX GPC   Philipp Zabel
• [PATCH v4 2/7] ARM: imx6: gpc: Add PU power domain for GPU/VPU   Philipp Zabel
• [PATCH v4 3/7] ARM: imx6: gpc: Add pm clock support to PU power domain   Philipp Zabel
• [PATCH v4 4/7] ARM: imx6: gpc: Add observed worst case latencies   Philipp Zabel
• [PATCH v4 5/7] ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delay   Philipp Zabel
• [PATCH v4 6/7] ARM: dts: imx6qdl: Add power-domain information to gpc node   Philipp Zabel
• [PATCH v4 7/7] ARM: dts: imx6sl: Add power-domain information to gpc node   Philipp Zabel
• [PATCH v4 1/7] Documentation: Add device tree bindings for Freescale i.MX GPC   Philipp Zabel
• [PATCH v4 1/7] Documentation: Add device tree bindings for Freescale i.MX GPC   Philipp Zabel
• [PATCH RFC 04/10] base: power: Add generic OF-based power domain look-up   Philipp Zabel
• [RFC PATCH 1/2] ARM: imx6q: Add GPR6 and GPR7 register definitions for iomuxc gpr   Philipp Zabel
• [RFC PATCH 2/2] ARM: imx6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority   Philipp Zabel
• [RFC PATCH 2/2] ARM: imx6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority   Philipp Zabel
• [PATCH v2 1/2] ARM: imx6q: Add GPR6 and GPR7 register definitions for iomuxc gpr   Philipp Zabel
• [PATCH v2 2/2] ARM i.MX6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority   Philipp Zabel
• [RFC PATCH 2/2] ARM: imx6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority   Philipp Zabel
• [PATCH v2 0/6] ARM: STi reset controller support   Philipp Zabel
• [PATCH RFC 04/10] base: power: Add generic OF-based power domain look-up   Philipp Zabel
• [PATCH v3 1/2] ARM: imx6q: Add GPR6 and GPR7 register definitions for iomuxc gpr   Philipp Zabel
• [PATCH v3 2/2] ARM i.MX6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority   Philipp Zabel
• [PATCH v2 2/2] ARM i.MX6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority   Philipp Zabel
• [PATCH v2 0/6] ARM: STi reset controller support   Philipp Zabel
• [RFC PATCH v3 0/9] imx-drm dt bindings   Philipp Zabel
• [RFC PATCH v3 1/9] staging: imx-drm-core: don't request probe deferral in imx_drm_encoder_parse_of   Philipp Zabel
• [RFC PATCH v3 1/9] staging: imx-drm-core: don't request probe deferral in imx_drm_encoder_parse_of   Philipp Zabel
• [RFC PATCH v3 2/9] staging: imx-drm: Add temporary copies of v4l2-of parsing functions   Philipp Zabel
• [RFC PATCH v3 1/9] staging: imx-drm-core: don't request probe deferral in imx_drm_encoder_parse_of   Philipp Zabel
• [PATCH v2 0/6] ARM: STi reset controller support   Philipp Zabel
• [PATCH v2 0/6] ARM: STi reset controller support   Philipp Zabel
• [RFC PATCH v4 0/8] imx-drm dt bindings   Philipp Zabel
• [RFC PATCH v4 1/8] staging: imx-drm-core: Use OF graph to find components and connections between encoder and crtcs   Philipp Zabel
• [RFC PATCH v4 2/8] staging: imx-drm-core: use of_graph_parse_endpoint   Philipp Zabel
• [RFC PATCH v4 3/8] staging: imx-drm: Document updated imx-drm device tree bindings   Philipp Zabel
• [RFC PATCH v4 4/8] staging: imx-drm: Document imx-hdmi device tree bindings   Philipp Zabel
• [RFC PATCH v4 5/8] ARM: dts: imx51: Add IPU ports and endpoints, move imx-drm node to dtsi   Philipp Zabel
• [RFC PATCH v4 6/8] ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to dtsi   Philipp Zabel
• [RFC PATCH v4 7/8] ARM: dts: imx6qdl: Add IPU DI ports and endpoints, move imx-drm node to dtsi   Philipp Zabel
• [RFC PATCH v4 8/8] staging: imx-drm: Update TODO   Philipp Zabel
• [RFC PATCH v4 4/8] staging: imx-drm: Document imx-hdmi device tree bindings   Philipp Zabel
• [PATCH] ARM: dts: imx6qdl-sabresd: Add HDMI support   Philipp Zabel
• [RFC PATCH v4 3/8] staging: imx-drm: Document updated imx-drm device tree bindings   Philipp Zabel
• [RFC PATCH v4 3/8] staging: imx-drm: Document updated imx-drm device tree bindings   Philipp Zabel
• [PATCH 8/9] Doc/DT: Add DT binding documentation for TFP410 encoder   Philipp Zabel
• [PATCH 7/9] Doc/DT: Add DT binding documentation for Sony acx565akm panel   Philipp Zabel
• [PATCH 5/9] Doc/DT: Add DT binding documentation for MIPI DPI Panel   Philipp Zabel
• [PATCH 3/9] Doc/DT: Add DT binding documentation for DVI Connector   Philipp Zabel
• [PATCH 0/9] Doc/DT: DT bindings for various display components   Philipp Zabel
• [PATCH v5 0/5] i.MX6 PU power domain support   Philipp Zabel
• [PATCH v5 1/5] Documentation: Add device tree bindings for Freescale i.MX GPC   Philipp Zabel
• [PATCH v5 2/5] ARM: imx6: gpc: Add PU power domain for GPU/VPU   Philipp Zabel
• [PATCH v5 3/5] ARM: dts: imx6qdl: Add power-domain information to gpc node   Philipp Zabel
• [PATCH v5 4/5] ARM: dts: imx6sl: Add power-domain information to gpc node   Philipp Zabel
• [PATCH v5 5/5] ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delay   Philipp Zabel
• [PATCH 3/9] Doc/DT: Add DT binding documentation for DVI Connector   Philipp Zabel
• use {readl|writel}_relaxed instead of readl/writel in i2c-designware-core ?   Jisheng Zhang
• use {readl|writel}_relaxed instead of readl/writel in i2c-designware-core ?   Jisheng Zhang
• [PATCH] net: ethernet: remove unneeded dependency of mvneta and update help text   Jisheng Zhang
• [PATCH] ARM: pxa: Add dummy backlight power supply on Mitac Mio A701   Haojian Zhuang
• [GIT PULL][for v3.14] pull request from pxa to fix PWM   Haojian Zhuang
• [patch 09/26] arm: mmp: Remove pointless fiddling with irq internals   Haojian Zhuang
• [patch 09/26] arm: mmp: Remove pointless fiddling with irq internals   Haojian Zhuang
• [PATCH 1/2] arm64: atomics: fix use of acquire + release for full barrier semantics   Peter Zijlstra
• [PATCH v2 6/6] cpu/idle.c: move to sched/idle.c   Peter Zijlstra
• [PATCH v2 6/6] cpu/idle.c: move to sched/idle.c   Peter Zijlstra
• [PATCH] arm64: KVM: Add VGIC device control for arm64   Marc Zyngier
• [PATCH] ARM64: KVM: Fix VGIC compile error for Linux-3.14-rc1   Marc Zyngier
• [PATCH 00/18] arm64: GICv3 support   Marc Zyngier
• [PATCH 01/18] arm64: initial support for GICv3   Marc Zyngier
• [PATCH 02/18] arm64: GICv3 device tree binding documentation   Marc Zyngier
• [PATCH 03/18] arm64: boot protocol documentation update for GICv3   Marc Zyngier
• [PATCH 04/18] KVM: arm/arm64: vgic: move GICv2 registers to their own structure   Marc Zyngier
• [PATCH 05/18] KVM: ARM: vgic: introduce vgic_ops and LR manipulation primitives   Marc Zyngier
• [PATCH 06/18] KVM: ARM: vgic: abstract access to the ELRSR bitmap   Marc Zyngier
• [PATCH 07/18] KVM: ARM: vgic: abstract EISR bitmap access   Marc Zyngier
• [PATCH 08/18] KVM: ARM: vgic: abstract MISR decoding   Marc Zyngier
• [PATCH 09/18] KVM: ARM: vgic: move underflow handling to vgic_ops   Marc Zyngier
• [PATCH 10/18] KVM: ARM: vgic: abstract VMCR access   Marc Zyngier
• [PATCH 11/18] KVM: ARM: vgic: introduce vgic_enable   Marc Zyngier
• [PATCH 12/18] KVM: ARM: introduce vgic_params structure   Marc Zyngier
• [PATCH 13/18] KVM: ARM: vgic: split GICv2 backend from the main vgic code   Marc Zyngier
• [PATCH 14/18] arm64: KVM: remove __kvm_hyp_code_{start, end} from hyp.S   Marc Zyngier
• [PATCH 15/18] arm64: KVM: split GICv2 world switch from hyp code   Marc Zyngier
• [PATCH 16/18] arm64: KVM: move hcr_el2 setting into vgic-v2-switch.S   Marc Zyngier
• [PATCH 17/18] KVM: ARM: vgic: add the GICv3 backend   Marc Zyngier
• [PATCH 18/18] arm64: KVM: vgic: add GICv3 world switch   Marc Zyngier
• [PATCH v3 00/11] arm/arm64: KVM: host cache maintenance when guest caches are off   Marc Zyngier
• [PATCH v3 01/11] arm64: KVM: force cache clean on page fault when caches are off   Marc Zyngier
• [PATCH v3 02/11] arm64: KVM: allows discrimination of AArch32 sysreg access   Marc Zyngier
• [PATCH v3 03/11] arm64: KVM: trap VM system registers until MMU and caches are ON   Marc Zyngier
• [PATCH v3 04/11] arm64: KVM: flush VM pages before letting the guest enable caches   Marc Zyngier
• [PATCH v3 05/11] ARM: LPAE: provide an IPA capable pmd_addr_end   Marc Zyngier
• [PATCH v3 06/11] ARM: KVM: force cache clean on page fault when caches are off   Marc Zyngier
• [PATCH v3 07/11] ARM: KVM: fix handling of trapped 64bit coprocessor accesses   Marc Zyngier
• [PATCH v3 08/11] ARM: KVM: fix ordering of 64bit coprocessor accesses   Marc Zyngier
• [PATCH v3 09/11] ARM: KVM: introduce per-vcpu HYP Configuration Register   Marc Zyngier
• [PATCH v3 10/11] ARM: KVM: add world-switch for AMAIR{0,1}   Marc Zyngier
• [PATCH v3 11/11] ARM: KVM: trap VM system registers until MMU and caches are ON   Marc Zyngier
• [PATCH] ARM: KVM: fix warning in mmu.c   Marc Zyngier
• [PATCH 3/6] irqchip: gic: use writel instead of dsb + writel_relaxed   Marc Zyngier
• [PATCH v2 2/5] irqchip: gic: use writel instead of dsb + writel_relaxed   Marc Zyngier
• [PATCH v3 05/11] ARM: LPAE: provide an IPA capable pmd_addr_end   Marc Zyngier
• [PATCH 1/3] arm64: dts: add initial dts for Samsung GH7 SoC and SSDK-GH7 board   Marc Zyngier
• [PATCH 1/3] arm64: dts: add initial dts for Samsung GH7 SoC and SSDK-GH7 board   Marc Zyngier
• [PATCH 8/9] ARM: virt: make mach-virt just a kconfig option   Marc Zyngier
• [PATCH v2 0/9] ARM: multi-platform kconfig cleanup and mach-virt removal   Marc Zyngier
• [PATCH 02/18] arm64: GICv3 device tree binding documentation   Marc Zyngier
• [PATCH 02/18] arm64: GICv3 device tree binding documentation   Marc Zyngier
• [PATCH 01/18] arm64: initial support for GICv3   Marc Zyngier
• [PATCH] KVM: ARM: vgic: plug irq injection race   Marc Zyngier
• [PATCH 01/18] arm64: initial support for GICv3   Marc Zyngier
• [PATCH 02/18] arm64: GICv3 device tree binding documentation   Marc Zyngier
• [PATCH v4 00/12] arm/arm64: KVM: host cache maintenance when guest caches are off   Marc Zyngier
• [PATCH v4 01/12] arm64: KVM: force cache clean on page fault when caches are off   Marc Zyngier
• [PATCH v4 02/12] arm64: KVM: allows discrimination of AArch32 sysreg access   Marc Zyngier
• [PATCH v4 03/12] arm64: KVM: trap VM system registers until MMU and caches are ON   Marc Zyngier
• [PATCH v4 04/12] ARM: KVM: introduce kvm_p*d_addr_end   Marc Zyngier
• [PATCH v4 05/12] arm64: KVM: flush VM pages before letting the guest enable caches   Marc Zyngier
• [PATCH v4 06/12] ARM: KVM: force cache clean on page fault when caches are off   Marc Zyngier
• [PATCH v4 07/12] ARM: KVM: fix handling of trapped 64bit coprocessor accesses   Marc Zyngier
• [PATCH v4 08/12] ARM: KVM: fix ordering of 64bit coprocessor accesses   Marc Zyngier
• [PATCH v4 09/12] ARM: KVM: introduce per-vcpu HYP Configuration Register   Marc Zyngier
• [PATCH v4 10/12] ARM: KVM: add world-switch for AMAIR{0,1}   Marc Zyngier
• [PATCH v4 11/12] ARM: KVM: trap VM system registers until MMU and caches are ON   Marc Zyngier
• [PATCH v4 12/12] ARM: KVM: fix warning in mmu.c   Marc Zyngier
• [PATCH v4 00/12] arm/arm64: KVM: host cache maintenance when guest caches are off   Marc Zyngier
• [PATCH] irqchip:gic: change access of gicc_ctrl register to read modify write.   Marc Zyngier
• [PATCH v4 00/12] arm/arm64: KVM: host cache maintenance when guest caches are off   Marc Zyngier
• [PATCH v3 2/5] irqchip: gic: use dmb ishst instead of dsb when raising a softirq   Marc Zyngier
• [PATCH] arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT   Marc Zyngier
• [PATCH] arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT   Marc Zyngier
• [PATCH] arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT   Marc Zyngier
• [PATCH v2] arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT   Marc Zyngier
• [PATCH v5 3/5] ACPI / processor: Introduce map_gic_id() to get apic id from MADT or _MAT method   Marc Zyngier
• [PATCH v2] arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT   Marc Zyngier
• [PATCH] irqchip:gic: change access of gicc_ctrl register to read modify write.   Marc Zyngier
• [PATCH 01/18] arm64: initial support for GICv3   Marc Zyngier
• [PATCH 03/18] arm64: boot protocol documentation update for GICv3   Marc Zyngier
• [PATCH 03/18] arm64: boot protocol documentation update for GICv3   Marc Zyngier
• [PATCH 18/18] arm64: KVM: vgic: add GICv3 world switch   Marc Zyngier
• [PATCH 17/18] KVM: ARM: vgic: add the GICv3 backend   Marc Zyngier
• [PATCH] arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT   Marc Zyngier
• [PATCH V2] irqchip:gic: change access of gicc_ctrl register to read modify write.   Marc Zyngier
• [PATCH V2] irqchip:gic: change access of gicc_ctrl register to read modify write.   Marc Zyngier
• [GIT PULL] clk: socfpga: Clock updates for v3.15   dinguyen at altera.com
• [GIT PULL] SOCFPGA DT updates for 3.15   dinguyen at altera.com
• [PATCH 1/3] clk: socfpga: Fix integer overflow in clock calculation   dinguyen at altera.com
• [PATCH 2/3] clk: socfpga: Support multiple parents for the pll clocks   dinguyen at altera.com
• [PATCH 3/3] dts: socfpga: Update clock entry to support multiple parents   dinguyen at altera.com
• [GIT PULL] SOCFPGA updates for 3.15   dinguyen at altera.com
• [PATCH] ARM: at91: sama5d3: get rid of atmel_tsadcc driver   ludovic.desroches at atmel.com
• [PATCH] ARM: at91: sama5d3: get rid of atmel_tsadcc driver   ludovic.desroches at atmel.com
• [PATCH] at91: pmc: Fixed irq's name allocation for programmable clocks   boris brezillon
• [PATCH] cpufreq: Set policy to non-NULL only after all hotplug online work is done   skannan at codeaurora.org
• [PATCH] cpufreq: Set policy to non-NULL only after all hotplug online work is done   skannan at codeaurora.org
• [PATCH] cpufreq: Set policy to non-NULL only after all hotplug online work is done   skannan at codeaurora.org
• [PATCH] cpufreq: Set policy to non-NULL only after all hotplug online work is done   skannan at codeaurora.org
• [PATCH] arm: LLVMLinux: use static inline in ARM ftrace.h   behanw at converseincode.com
• [PATCH] arm: msm: remove MACH_MSM7X30_SURF   dwalker at fifo99.com
• [PATCH 2/2] ARM: imx: add speed grading check for i.mx6 soc   Anson.Huang at freescale.com
• [PATCH] thermal: imx: update formula for thermal sensor   Anson.Huang at freescale.com
• PCIe trouble on imx6q   Hong-Xing.Zhu at freescale.com
• [PATCH 2/2] PCI: imx6: add support for MSI   Hong-Xing.Zhu at freescale.com
• [PATCH v4 1/2] spi:fsl-dspi:convert to use regmap and big-endian supports   Li.Xiubo at freescale.com
• [PATCH 2/4] ARM: dts: Enable SAI ALSA SoC DAI device for Vybrid VF610 TOWER board.   Li.Xiubo at freescale.com
• [PATCH 1/4] ARM: dts: Add Freescale SAI ALSA SoC Digital Audio Interface node for VF610.   Li.Xiubo at freescale.com
• [PATCH 2/4] ARM: dts: Enable SAI ALSA SoC DAI device for Vybrid VF610 TOWER board.   Li.Xiubo at freescale.com
• [PATCH 01/15] ASoC: fsl-ssi: Use regmap   Li.Xiubo at freescale.com
• [PATCH v5 1/3] ARM: dts: vf610-twr: Add ADC support   fugang.duan at freescale.com
• [PATCH v5 1/3] ARM: dts: vf610-twr: Add ADC support   fugang.duan at freescale.com
• [RFC PATCH 0/1] arm64: 48-bit Physical Address support   mohun106 at gmail.com
• [RFC PATCH 1/1] arm64: Add support for 48-bit Physical Address   mohun106 at gmail.com
• [PATCH 0/2] Add support for Cavium Thunder ARMv8 platform   mohun106 at gmail.com
• [PATCH 1/2] arm64: Add Kconfig option for Cavium Thunder SoC Family   mohun106 at gmail.com
• [PATCH 2/2] arm64: Add initial dts for Cavium Thunder SoC   mohun106 at gmail.com
• [PATCH v10 0/6] arm64: KGDB Support   vijay.kilari at gmail.com
• [PATCH v10 1/6] arm64: Add macros to manage processor debug state   vijay.kilari at gmail.com
• [PATCH v10 2/6] arm64: KGDB: Add Basic KGDB support   vijay.kilari at gmail.com
• [PATCH v10 3/6] arm64: KGDB: Add step debugging support   vijay.kilari at gmail.com
• [PATCH v10 4/6] KGDB: make kgdb_breakpoint() as noinline   vijay.kilari at gmail.com
• [PATCH v10 5/6] misc: debug: remove compilation warnings   vijay.kilari at gmail.com
• [PATCH v10 6/6] arm64: KGDB: Add KGDB config   vijay.kilari at gmail.com
• [PATCH 1/1] arm64: enable processor debug state for secondary cpus   vijay.kilari at gmail.com
• [PATCH] ARM: dts: am335x-evmsk: enable USB1   yegorslists at googlemail.com
• [PATCH 1/4] ARM: STi: add stid127 soc support   srinivas kandagatla
• [PATCH v1 1/3] net: stmmac:sti: Add STi SOC glue driver.   srinivas kandagatla
• [PATCH 1/4] ARM: STi: add stid127 soc support   srinivas kandagatla
• [PATCH v2 0/6] ARM: STi reset controller support   srinivas kandagatla
• [PATCH v2 1/3] net: stmmac:sti: Add STi SOC glue driver.   srinivas kandagatla
• [PATCH v2 0/6] ARM: STi reset controller support   srinivas kandagatla
• [PATCH v2 0/6] ARM: STi reset controller support   srinivas kandagatla
• [PATCH v2 0/6] ARM: STi reset controller support   srinivas kandagatla
• [PATCH v3 4/4] ARM: Kirkwood: Add support for many Synology NAS devices   klightspeed at killerwolves.net
• [PATCH v4 0/4] DT support for kirkwood based Synology NAS boxes   klightspeed at killerwolves.net
• [PATCH v4 1/4] Power: Reset: Generalize qnap-poweroff to with on Synology devices.   klightspeed at killerwolves.net
• [PATCH v4 2/4] DT: Vendor prefixes: Add ricoh, ssi and synology   klightspeed at killerwolves.net
• [PATCH v4 3/4] DT: i2c: Trivial: Add sii, s35390a, fix ricoh vendor prefix   klightspeed at killerwolves.net
• [PATCH v4 4/4] ARM: Kirkwood: Add support for many Synology NAS devices   klightspeed at killerwolves.net
• [PATCH v5 0/5] DT support for kirkwood based Synology NAS boxes   klightspeed at killerwolves.net
• [PATCH v5 1/5] DT: Vendor prefixes: Add ricoh, qnap, sii and synology   klightspeed at killerwolves.net
• [PATCH v5 2/5] Power: Reset: Generalize qnap-poweroff to work on Synology devices.   klightspeed at killerwolves.net
• [PATCH v5 3/5] DT: i2c: Trivial: Add sii, s35390a, fix ricoh vendor prefix   klightspeed at killerwolves.net
• [PATCH v5 4/5] ARM: Kirkwood: Fix qnap vendor prefix   klightspeed at killerwolves.net
• [PATCH v5 5/5] ARM: Kirkwood: Add support for many Synology NAS devices   klightspeed at killerwolves.net
• [PATCH v6 0/4] DT support for kirkwood based Synology NAS boxes   klightspeed at killerwolves.net
• [PATCH v6 1/4] DT: Vendor prefixes: Add ricoh, qnap, sii and synology   klightspeed at killerwolves.net
• [PATCH v6 2/4] Power: Reset: Generalize qnap-poweroff to work on Synology devices.   klightspeed at killerwolves.net
• [PATCH v6 3/4] DT: i2c: Trivial: Add sii, s35390a, fix ricoh vendor prefix   klightspeed at killerwolves.net
• [PATCH v6 4/4] ARM: Kirkwood: Add support for many Synology NAS devices   klightspeed at killerwolves.net
• [PATCH v7 0/4] DT support for kirkwood based Synology NAS boxes   klightspeed at killerwolves.net
• [PATCH v7 1/4] DT: Vendor prefixes: Add ricoh, qnap, sii and synology   klightspeed at killerwolves.net
• [PATCH v7 2/4] Power: Reset: Generalize qnap-poweroff to work on Synology devices.   klightspeed at killerwolves.net
• [PATCH v7 3/4] DT: i2c: Trivial: Add sii,s35390a   klightspeed at killerwolves.net
• [PATCH v7 4/4] ARM: Kirkwood: Add support for many Synology NAS devices   klightspeed at killerwolves.net
• Linux-3.10 LTSI: Missing R-Car Sound Support on Marzen (R8A7779)   srikanth krishnakar
• renesas-backport.git: Linux-3.10.28 Marzen (R8A7779) missing Audio Support   srikanth krishnakar
• [PATCH 2/2] arm/xen: Don't use xen DMA ops when the device is protected by an IOMMU   gregkh at linuxfoundation.org
• [PATCH] ARM: enable IRQs in user undefined instruction vector   vinayak menon
• [PATCH] ARM: enable IRQs in user undefined instruction vector   vinayak menon
• [PATCH v6 05/19] watchdog: orion: Make sure the watchdog is initially stopped   linux at roeck-us.net
• [PATCH v6 05/19] watchdog: orion: Make sure the watchdog is initially stopped   linux at roeck-us.net
• [PATCH 01/17] Documentation: i2c: describe devicetree method for instantiating devices   linux at roeck-us.net
• [PATCH v2] Phytec phyFLEX-i.MX6 : Added USB_OTG Support   Ashutosh singh
• [PATCH 1/3] Phytec phyFLEX-i.MX6 : Added USB_HOST Support   Ashutosh singh
• [PATCH 2/3] Phytec phyFLEX-i.MX6 : Added GPMI-NAND Support   Ashutosh singh
• [PATCH 3/3] Phytec phyFLEX-i.MX6 : Added SATA Support   Ashutosh singh
• [PATCH v3 1/4] Phytec phyFLEX-i.MX6 : Added USB_OTG Support   Ashutosh singh
• [PATCH v2 2/4] Phytec phyFLEX-i.MX6 : Added USB_HOST Support   Ashutosh singh
• [PATCH v2 3/4] Phytec phyFLEX-i.MX6 : Added GPMI-NAND Support   Ashutosh singh
• [PATCH v2 4/4] Phytec phyFLEX-i.MX6 : Added SATA Support   Ashutosh singh
• [PATCH v4 1/4] ARM: dts: imx6q-phytec: Added USB_OTG Support   Ashutosh singh
• [PATCH v3 2/4] ARM: dts: imx6q-phytec: Added USB_HOST Support   Ashutosh singh
• [PATCH v3 3/4] ARM: dts: imx6q-phytec: Added GPMI-NAND Support   Ashutosh singh
• [PATCH v3 4/4] ARM: dts: imx6q-phytec: Added SATA Support   Ashutosh singh
• [PATCH v1 0/3] net: stmmac: Add STi GMAC ethernet   srinivas.kandagatla at st.com
• [PATCH v1 1/3] net: stmmac:sti: Add STi SOC glue driver.   srinivas.kandagatla at st.com
• [PATCH v1 2/3] ARM: STi: Add STiH415 ethernet support.   srinivas.kandagatla at st.com
• [PATCH v1 3/3] ARM: STi: Add STiH416 ethernet support.   srinivas.kandagatla at st.com
• [PATCH v2 0/6] ARM: STi reset controller support   srinivas.kandagatla at st.com
• [PATCH v2 1/6] drivers: reset: STi SoC system configuration reset controller support   srinivas.kandagatla at st.com
• [PATCH v2 2/6] drivers: reset: Reset controller driver for STiH415   srinivas.kandagatla at st.com
• [PATCH v2 3/6] drivers: reset: Reset controller driver for STiH416   srinivas.kandagatla at st.com
• [PATCH v2 4/6] drivers: reset: stih415: add softreset controller   srinivas.kandagatla at st.com
• [PATCH v2 5/6] drivers: reset: stih416: add softreset controller   srinivas.kandagatla at st.com
• [PATCH v2 6/6] ARM: STi: Add reset controller support to mach-sti Kconfig   srinivas.kandagatla at st.com
• [PATCH v2 0/3] net: stmmac: Add STi GMAC ethernet   srinivas.kandagatla at st.com
• [PATCH v2 1/3] net: stmmac:sti: Add STi SOC glue driver.   srinivas.kandagatla at st.com
• [PATCH v2 2/3] ARM: STi: Add STiH415 ethernet support.   srinivas.kandagatla at st.com
• [PATCH v2 3/3] ARM: STi: Add STiH416 ethernet support.   srinivas.kandagatla at st.com
• [PATCH v3 0/3] net: stmmac: Add STi GMAC ethernet   srinivas.kandagatla at st.com
• [PATCH v3 1/3] net: stmmac:sti: Add STi SOC glue driver.   srinivas.kandagatla at st.com