[PATCH v9 7/9] ARM: OMAP2+: Remove legacy_init_ehci_clk()
Roger Quadros
rogerq at ti.com
Thu Feb 27 09:18:29 EST 2014
The necessary clock phandle for the EHCI clock is now provided
via device tree so we no longer need this legacy method.
Update the omap4-panda and omap5-uevm board DTS to provide the
necessary EHCI PHY clock information.
Signed-off-by: Roger Quadros <rogerq at ti.com>
---
arch/arm/boot/dts/omap4-panda-common.dtsi | 8 ++------
arch/arm/boot/dts/omap5-uevm.dts | 8 ++------
arch/arm/mach-omap2/pdata-quirks.c | 16 ----------------
3 files changed, 4 insertions(+), 28 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 88c6a05..50b72966 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -83,12 +83,8 @@
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
vcc-supply = <&hsusb1_power>;
- /**
- * FIXME:
- * put the right clock phandle here when available
- * clocks = <&auxclk3>;
- * clock-names = "main_clk";
- */
+ clocks = <&auxclk3_ck>;
+ clock-names = "main_clk";
clock-frequency = <19200000>;
};
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 002fa70..3b99ec2 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -31,12 +31,8 @@
hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
- /**
- * FIXME
- * Put the right clock phandle here when available
- * clocks = <&auxclk1>;
- * clock-names = "main_clk";
- */
+ clocks = <&auxclk1_ck>;
+ clock-names = "main_clk";
clock-frequency = <19200000>;
};
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 3d5b24d..f1ecd86 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -31,20 +31,6 @@ struct pdata_init {
struct of_dev_auxdata omap_auxdata_lookup[];
static struct twl4030_gpio_platform_data twl_gpio_auxdata;
-/*
- * Create alias for USB host PHY clock.
- * Remove this when clock phandle can be provided via DT
- */
-static void __init __used legacy_init_ehci_clk(char *clkname)
-{
- int ret;
-
- ret = clk_add_alias("main_clk", NULL, clkname, NULL);
- if (ret)
- pr_err("%s:Failed to add main_clk alias to %s :%d\n",
- __func__, clkname, ret);
-}
-
#if IS_ENABLED(CONFIG_WL12XX)
static struct wl12xx_platform_data wl12xx __initdata;
@@ -182,7 +168,6 @@ static void __init omap4_sdp_legacy_init(void)
static void __init omap4_panda_legacy_init(void)
{
omap4_panda_display_init_of();
- legacy_init_ehci_clk("auxclk3_ck");
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53);
}
#endif
@@ -190,7 +175,6 @@ static void __init omap4_panda_legacy_init(void)
#ifdef CONFIG_SOC_OMAP5
static void __init omap5_uevm_legacy_init(void)
{
- legacy_init_ehci_clk("auxclk1_ck");
}
#endif
--
1.8.3.2
More information about the linux-arm-kernel
mailing list