[PATCH v2 1/2] ohci-platform: Change compatible string from usb-ohci to generic-ohci
Roger Quadros
rogerq at ti.com
Wed Feb 12 03:45:05 EST 2014
On 02/11/2014 06:35 PM, Hans de Goede wrote:
> The initial versions of the devicetree enablement patches for ohci-platform
> used "ohci-platform" as compatible string. However this was disliked by various
> reviewers because the platform bus is a Linux invention and devicetree is
> supposed to be OS agnostic. After much discussion I gave up and went with
> the generic usb-ohci as requested.
>
> In retro-spect I should have chosen something different, the dts files for many
> existing boards already claim to be compatible with "usb-ohci", ie they have:
>
> compatible = "ti,ohci-omap3", "usb-ohci";
>
> In theory this should not be a problem since the "ti,ohci-omap3" entry takes
> presedence, but in practice using a conflicting compatible string is an issue,
> because it makes which driver gets used depend on driver registration order.
>
> This patch changes the compatible string claimed by ohci-platform to
> "generic-ohci", avoiding the driver registration / module loading ordering
> problems.
>
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> ---
> Documentation/devicetree/bindings/usb/usb-ohci.txt | 4 ++--
> drivers/usb/host/ohci-platform.c | 2 +-
> 2 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
> index 6933b0c..45f67d9 100644
> --- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
> +++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
> @@ -1,7 +1,7 @@
> USB OHCI controllers
>
> Required properties:
> -- compatible : "usb-ohci"
> +- compatible : "generic-ohci"
> - reg : ohci controller register range (address and length)
> - interrupts : ohci controller interrupt
>
> @@ -16,7 +16,7 @@ Optional properties:
> Example:
>
> ohci0: usb at 01c14400 {
> - compatible = "allwinner,sun4i-a10-ohci", "usb-ohci";
> + compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
> reg = <0x01c14400 0x100>;
> interrupts = <64>;
> clocks = <&usb_clk 6>, <&ahb_gates 2>;
> diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
> index e2c28fd..b6ca0b2 100644
> --- a/drivers/usb/host/ohci-platform.c
> +++ b/drivers/usb/host/ohci-platform.c
> @@ -319,7 +319,7 @@ static int ohci_platform_resume(struct device *dev)
> #endif /* CONFIG_PM */
>
> static const struct of_device_id ohci_platform_ids[] = {
> - { .compatible = "usb-ohci", },
> + { .compatible = "generic-ohci", },
> { }
> };
> MODULE_DEVICE_TABLE(of, ohci_platform_ids);
>
both v2 patches
Acked-by: Roger Quadros <rogerq at ti.com>
More information about the linux-arm-kernel
mailing list