[PATCH v4 10/22] ARM: MM: Add DT binding for Feroceon L2 cache
Andrew Lunn
andrew at lunn.ch
Sat Feb 22 14:14:52 EST 2014
Instantiate the L2 cache from DT. Indicate in DT where the cache
control register is so that it is possible to enable/disable write
through on the CPU.
Signed-off-by: Andrew Lunn <andrew at lunn.ch>
Tested-by: Jason Gunthorpe <jgunthorpe at obsidianresearch.com>
cc: devicetree at vger.kernel.org
---
v2:
Change compatible strings to follow l2x0 convention
Only expect register for kirkwood-cache.
Default to write through if no DT node.
Rename writethrough to wt-override to follow l2cc binding.
Split kirkwood.dtsi change into a patch of its own.
v3
Remove wt-override from the binding
Respect CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
---
.../devicetree/bindings/arm/mrvl/feroceon.txt | 16 ++++++++
arch/arm/include/asm/hardware/cache-feroceon-l2.h | 2 +
arch/arm/mach-kirkwood/board-dt.c | 18 ++-------
arch/arm/mm/cache-feroceon-l2.c | 43 ++++++++++++++++++++++
4 files changed, 64 insertions(+), 15 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/mrvl/feroceon.txt
diff --git a/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt b/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt
new file mode 100644
index 000000000000..0d244b999d10
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt
@@ -0,0 +1,16 @@
+* Marvell Feroceon Cache
+
+Required properties:
+- compatible : Should be either "marvell,feroceon-cache" or
+ "marvell,kirkwood-cache".
+
+Optional properties:
+- reg : Address of the L2 cache control register. Mandatory for
+ "marvell,kirkwood-cache", not used by "marvell,feroceon-cache"
+
+
+Example:
+ l2: l2-cache at 20128 {
+ compatible = "marvell,kirkwood-cache";
+ reg = <0x20128 0x4>;
+ };
diff --git a/arch/arm/include/asm/hardware/cache-feroceon-l2.h b/arch/arm/include/asm/hardware/cache-feroceon-l2.h
index 8edd330aabf6..12e1588dc4f1 100644
--- a/arch/arm/include/asm/hardware/cache-feroceon-l2.h
+++ b/arch/arm/include/asm/hardware/cache-feroceon-l2.h
@@ -9,3 +9,5 @@
*/
extern void __init feroceon_l2_init(int l2_wt_override);
+extern int __init feroceon_of_init(void);
+
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 29c246858d5a..ec0702c02d6c 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -42,19 +42,6 @@ static void __init kirkwood_map_io(void)
iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
}
-static void __init kirkwood_l2_init(void)
-{
-#ifdef CONFIG_CACHE_FEROCEON_L2
-#ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
- writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG);
- feroceon_l2_init(1);
-#else
- writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG);
- feroceon_l2_init(0);
-#endif
-#endif
-}
-
static struct resource kirkwood_cpufreq_resources[] = {
[0] = {
.start = CPU_CONTROL_PHYS,
@@ -211,8 +198,9 @@ static void __init kirkwood_dt_init(void)
BUG_ON(mvebu_mbus_dt_init());
- kirkwood_l2_init();
-
+#ifdef CONFIG_CACHE_FEROCEON_L2
+ feroceon_of_init();
+#endif
kirkwood_cpufreq_init();
kirkwood_cpuidle_init();
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
index 898362e7972b..8dc1a2b5a8ed 100644
--- a/arch/arm/mm/cache-feroceon-l2.c
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -13,11 +13,16 @@
*/
#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/highmem.h>
+#include <linux/io.h>
#include <asm/cacheflush.h>
#include <asm/cp15.h>
#include <asm/hardware/cache-feroceon-l2.h>
+#define L2_WRITETHROUGH_KIRKWOOD BIT(4)
+
/*
* Low-level cache maintenance operations.
*
@@ -350,3 +355,41 @@ void __init feroceon_l2_init(int __l2_wt_override)
printk(KERN_INFO "Feroceon L2: Cache support initialised%s.\n",
l2_wt_override ? ", in WT override mode" : "");
}
+#ifdef CONFIG_OF
+static const struct of_device_id feroceon_ids[] __initconst = {
+ { .compatible = "marvell,kirkwood-cache"},
+ { .compatible = "marvell,feroceon-cache"},
+ {}
+};
+
+int __init feroceon_of_init(void)
+{
+ struct device_node *node;
+ void __iomem *base;
+ bool l2_wt_override = false;
+ struct resource res;
+
+#if defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
+ l2_wt_override = true;
+#endif
+
+ node = of_find_matching_node(NULL, feroceon_ids);
+ if (node && of_device_is_compatible(node, "marvell,kirkwood-cache")) {
+ if (of_address_to_resource(node, 0, &res))
+ return -ENODEV;
+
+ base = ioremap(res.start, resource_size(&res));
+ if (!base)
+ return -ENOMEM;
+
+ if (l2_wt_override)
+ writel(readl(base) | L2_WRITETHROUGH_KIRKWOOD, base);
+ else
+ writel(readl(base) & ~L2_WRITETHROUGH_KIRKWOOD, base);
+ }
+
+ feroceon_l2_init(l2_wt_override);
+
+ return 0;
+}
+#endif
--
1.8.5.3
More information about the linux-arm-kernel
mailing list