[PATCH v9 2/4] ehci-platform: Add support for clks and phy passed through devicetree
Roger Quadros
rogerq at ti.com
Tue Feb 11 04:12:43 EST 2014
Hi Hans,
On 02/07/2014 05:36 PM, Hans de Goede wrote:
> Currently ehci-platform is only used in combination with devicetree when used
> with some Via socs. By extending it to (optionally) get clks and a phy from
> devicetree, and enabling / disabling those on power_on / off, it can be used
> more generically. Specifically after this commit it can be used for the
> ehci controller on Allwinner sunxi SoCs.
>
> Since ehci-platform is intended to handle any generic enough non pci ehci
> device, add a "usb-ehci" compatibility string.
>
> There already is a usb-ehci device-tree bindings document, update this
> with clks and phy bindings info.
>
> Although actually quite generic so far the via,vt8500 compatibilty string
> had its own bindings document. Somehow we even ended up with 2 of them. Since
> these provide no extra information over the generic usb-ehci documentation,
> this patch removes them.
>
> The ehci-ppc-of.c driver also claims the usb-ehci compatibility string,
> even though it mostly is ibm,usb-ehci-440epx specific. ehci-platform.c is
> not needed on ppc platforms, so add a !PPC_OF dependency to it to avoid
> 2 drivers claiming the same compatibility string getting build on ppc.
>
This breaks all OMAP platforms on linux-next for the exact same reason. see [1].
./arch/arm/boot/dts/omap4.dtsi: compatible = "ti,ehci-omap", "usb-ehci";
./arch/arm/boot/dts/omap3.dtsi: compatible = "ti,ehci-omap", "usb-ehci";
./arch/arm/boot/dts/omap5.dtsi: compatible = "ti,ehci-omap", "usb-ehci";
The other platforms that claim compatibility with "usb-ehci" are
ARM
./arch/arm/boot/dts/tegra30.dtsi: compatible = "nvidia,tegra30-ehci", "usb-ehci";
./arch/arm/boot/dts/tegra20.dtsi: compatible = "nvidia,tegra20-ehci", "usb-ehci";
./arch/arm/boot/dts/spear600.dtsi: compatible = "st,spear600-ehci", "usb-ehci";
./arch/arm/boot/dts/spear3xx.dtsi: compatible = "st,spear600-ehci", "usb-ehci";
./arch/arm/boot/dts/sama5d3.dtsi: compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
./arch/arm/boot/dts/at91sam9g45.dtsi: compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
./arch/arm/boot/dts/spear13xx.dtsi: compatible = "st,spear600-ehci", "usb-ehci";
./arch/arm/boot/dts/at91sam9x5.dtsi: compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
./arch/arm/boot/dts/tegra114.dtsi: compatible = "nvidia,tegra30-ehci", "usb-ehci";
MIPS
./arch/mips/cavium-octeon/octeon_68xx.dts: compatible = "cavium,octeon-6335-ehci","usb-ehci";
./arch/mips/cavium-octeon/octeon_3xxx.dts: compatible = "cavium,octeon-6335-ehci","usb-ehci";
Do we know that we don't break these platforms as well?
cheers,
-roger
[1] - http://marc.info/?l=linux-usb&m=139204800102167&w=2
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> Acked-by: Alan Stern <stern at rowland.harvard.edu>
> ---
> Documentation/devicetree/bindings/usb/usb-ehci.txt | 25 +++-
> .../devicetree/bindings/usb/via,vt8500-ehci.txt | 15 ---
> .../devicetree/bindings/usb/vt8500-ehci.txt | 12 --
> drivers/usb/host/Kconfig | 1 +
> drivers/usb/host/ehci-platform.c | 147 +++++++++++++++++----
> 5 files changed, 142 insertions(+), 58 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt
> delete mode 100644 Documentation/devicetree/bindings/usb/vt8500-ehci.txt
>
> diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
> index fa18612..2c1aeeb 100644
> --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
> +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
> @@ -7,13 +7,14 @@ Required properties:
> (debug-port or other) can be also specified here, but only after
> definition of standard EHCI registers.
> - interrupts : one EHCI interrupt should be described here.
> -If device registers are implemented in big endian mode, the device
> -node should have "big-endian-regs" property.
> -If controller implementation operates with big endian descriptors,
> -"big-endian-desc" property should be specified.
> -If both big endian registers and descriptors are used by the controller
> -implementation, "big-endian" property can be specified instead of having
> -both "big-endian-regs" and "big-endian-desc".
> +
> +Optional properties:
> + - big-endian-regs : boolean, set this for hcds with big-endian registers
> + - big-endian-desc : boolean, set this for hcds with big-endian descriptors
> + - big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
> + - clocks : a list of phandle + clock specifier pairs
> + - phys : phandle + phy specifier pair
> + - phy-names : "usb"
>
> Example (Sequoia 440EPx):
> ehci at e0000300 {
> @@ -23,3 +24,13 @@ Example (Sequoia 440EPx):
> reg = <0 e0000300 90 0 e0000390 70>;
> big-endian;
> };
> +
> +Example (Allwinner sun4i A10 SoC):
> + ehci0: usb at 01c14000 {
> + compatible = "allwinner,sun4i-a10-ehci", "usb-ehci";
> + reg = <0x01c14000 0x100>;
> + interrupts = <39>;
> + clocks = <&ahb_gates 1>;
> + phys = <&usbphy 1>;
> + phy-names = "usb";
> + };
> diff --git a/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt b/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt
> deleted file mode 100644
> index 17b3ad1..0000000
> --- a/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt
> +++ /dev/null
> @@ -1,15 +0,0 @@
> -VIA/Wondermedia VT8500 EHCI Controller
> ------------------------------------------------------
> -
> -Required properties:
> -- compatible : "via,vt8500-ehci"
> -- reg : Should contain 1 register ranges(address and length)
> -- interrupts : ehci controller interrupt
> -
> -Example:
> -
> - ehci at d8007900 {
> - compatible = "via,vt8500-ehci";
> - reg = <0xd8007900 0x200>;
> - interrupts = <43>;
> - };
> diff --git a/Documentation/devicetree/bindings/usb/vt8500-ehci.txt b/Documentation/devicetree/bindings/usb/vt8500-ehci.txt
> deleted file mode 100644
> index 5fb8fd6..0000000
> --- a/Documentation/devicetree/bindings/usb/vt8500-ehci.txt
> +++ /dev/null
> @@ -1,12 +0,0 @@
> -VIA VT8500 and Wondermedia WM8xxx SoC USB controllers.
> -
> -Required properties:
> - - compatible: Should be "via,vt8500-ehci" or "wm,prizm-ehci".
> - - reg: Address range of the ehci registers. size should be 0x200
> - - interrupts: Should contain the ehci interrupt.
> -
> -usb: ehci at D8007100 {
> - compatible = "wm,prizm-ehci", "usb-ehci";
> - reg = <0xD8007100 0x200>;
> - interrupts = <1>;
> -};
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index a9707da..e28cbe0 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -255,6 +255,7 @@ config USB_EHCI_ATH79
>
> config USB_EHCI_HCD_PLATFORM
> tristate "Generic EHCI driver for a platform device"
> + depends on !PPC_OF
> default n
> ---help---
> Adds an EHCI host driver for a generic platform device, which
> diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
> index 01536cf..5ebd0b7 100644
> --- a/drivers/usb/host/ehci-platform.c
> +++ b/drivers/usb/host/ehci-platform.c
> @@ -3,6 +3,7 @@
> *
> * Copyright 2007 Steven Brown <sbrown at cortland.com>
> * Copyright 2010-2012 Hauke Mehrtens <hauke at hauke-m.de>
> + * Copyright 2014 Hans de Goede <hdegoede at redhat.com>
> *
> * Derived from the ohci-ssb driver
> * Copyright 2007 Michael Buesch <m at bues.ch>
> @@ -18,6 +19,7 @@
> *
> * Licensed under the GNU/GPL. See COPYING for details.
> */
> +#include <linux/clk.h>
> #include <linux/dma-mapping.h>
> #include <linux/err.h>
> #include <linux/kernel.h>
> @@ -25,6 +27,7 @@
> #include <linux/io.h>
> #include <linux/module.h>
> #include <linux/of.h>
> +#include <linux/phy/phy.h>
> #include <linux/platform_device.h>
> #include <linux/usb.h>
> #include <linux/usb/hcd.h>
> @@ -33,6 +36,13 @@
> #include "ehci.h"
>
> #define DRIVER_DESC "EHCI generic platform driver"
> +#define EHCI_MAX_CLKS 3
> +#define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv)
> +
> +struct ehci_platform_priv {
> + struct clk *clks[EHCI_MAX_CLKS];
> + struct phy *phy;
> +};
>
> static const char hcd_name[] = "ehci-platform";
>
> @@ -64,38 +74,90 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
> return 0;
> }
>
> +static int ehci_platform_power_on(struct platform_device *dev)
> +{
> + struct usb_hcd *hcd = platform_get_drvdata(dev);
> + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
> + int clk, ret;
> +
> + for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++) {
> + ret = clk_prepare_enable(priv->clks[clk]);
> + if (ret)
> + goto err_disable_clks;
> + }
> +
> + if (priv->phy) {
> + ret = phy_init(priv->phy);
> + if (ret)
> + goto err_disable_clks;
> +
> + ret = phy_power_on(priv->phy);
> + if (ret)
> + goto err_exit_phy;
> + }
> +
> + return 0;
> +
> +err_exit_phy:
> + phy_exit(priv->phy);
> +err_disable_clks:
> + while (--clk >= 0)
> + clk_disable_unprepare(priv->clks[clk]);
> +
> + return ret;
> +}
> +
> +static void ehci_platform_power_off(struct platform_device *dev)
> +{
> + struct usb_hcd *hcd = platform_get_drvdata(dev);
> + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
> + int clk;
> +
> + if (priv->phy) {
> + phy_power_off(priv->phy);
> + phy_exit(priv->phy);
> + }
> +
> + for (clk = EHCI_MAX_CLKS - 1; clk >= 0; clk--)
> + if (priv->clks[clk])
> + clk_disable_unprepare(priv->clks[clk]);
> +}
> +
> static struct hc_driver __read_mostly ehci_platform_hc_driver;
>
> static const struct ehci_driver_overrides platform_overrides __initconst = {
> - .reset = ehci_platform_reset,
> + .reset = ehci_platform_reset,
> + .extra_priv_size = sizeof(struct ehci_platform_priv),
> };
>
> -static struct usb_ehci_pdata ehci_platform_defaults;
> +static struct usb_ehci_pdata ehci_platform_defaults = {
> + .power_on = ehci_platform_power_on,
> + .power_suspend = ehci_platform_power_off,
> + .power_off = ehci_platform_power_off,
> +};
>
> static int ehci_platform_probe(struct platform_device *dev)
> {
> struct usb_hcd *hcd;
> struct resource *res_mem;
> - struct usb_ehci_pdata *pdata;
> - int irq;
> - int err;
> + struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
> + struct ehci_platform_priv *priv;
> + int err, irq, clk = 0;
>
> if (usb_disabled())
> return -ENODEV;
>
> /*
> - * use reasonable defaults so platforms don't have to provide these.
> - * with DT probing on ARM, none of these are set.
> + * Use reasonable defaults so platforms don't have to provide these
> + * with DT probing on ARM.
> */
> - if (!dev_get_platdata(&dev->dev))
> - dev->dev.platform_data = &ehci_platform_defaults;
> + if (!pdata)
> + pdata = &ehci_platform_defaults;
>
> err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
> if (err)
> return err;
>
> - pdata = dev_get_platdata(&dev->dev);
> -
> irq = platform_get_irq(dev, 0);
> if (irq < 0) {
> dev_err(&dev->dev, "no irq provided");
> @@ -107,17 +169,40 @@ static int ehci_platform_probe(struct platform_device *dev)
> return -ENXIO;
> }
>
> + hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
> + dev_name(&dev->dev));
> + if (!hcd)
> + return -ENOMEM;
> +
> + platform_set_drvdata(dev, hcd);
> + dev->dev.platform_data = pdata;
> + priv = hcd_to_ehci_priv(hcd);
> +
> + if (pdata == &ehci_platform_defaults && dev->dev.of_node) {
> + priv->phy = devm_phy_get(&dev->dev, "usb");
> + if (IS_ERR(priv->phy)) {
> + err = PTR_ERR(priv->phy);
> + if (err == -EPROBE_DEFER)
> + goto err_put_hcd;
> + priv->phy = NULL;
> + }
> +
> + for (clk = 0; clk < EHCI_MAX_CLKS; clk++) {
> + priv->clks[clk] = of_clk_get(dev->dev.of_node, clk);
> + if (IS_ERR(priv->clks[clk])) {
> + err = PTR_ERR(priv->clks[clk]);
> + if (err == -EPROBE_DEFER)
> + goto err_put_clks;
> + priv->clks[clk] = NULL;
> + break;
> + }
> + }
> + }
> +
> if (pdata->power_on) {
> err = pdata->power_on(dev);
> if (err < 0)
> - return err;
> - }
> -
> - hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
> - dev_name(&dev->dev));
> - if (!hcd) {
> - err = -ENOMEM;
> - goto err_power;
> + goto err_put_clks;
> }
>
> hcd->rsrc_start = res_mem->start;
> @@ -126,22 +211,28 @@ static int ehci_platform_probe(struct platform_device *dev)
> hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
> if (IS_ERR(hcd->regs)) {
> err = PTR_ERR(hcd->regs);
> - goto err_put_hcd;
> + goto err_power;
> }
> err = usb_add_hcd(hcd, irq, IRQF_SHARED);
> if (err)
> - goto err_put_hcd;
> + goto err_power;
>
> device_wakeup_enable(hcd->self.controller);
> platform_set_drvdata(dev, hcd);
>
> return err;
>
> -err_put_hcd:
> - usb_put_hcd(hcd);
> err_power:
> if (pdata->power_off)
> pdata->power_off(dev);
> +err_put_clks:
> + while (--clk >= 0)
> + clk_put(priv->clks[clk]);
> +err_put_hcd:
> + if (pdata == &ehci_platform_defaults)
> + dev->dev.platform_data = NULL;
> +
> + usb_put_hcd(hcd);
>
> return err;
> }
> @@ -150,13 +241,19 @@ static int ehci_platform_remove(struct platform_device *dev)
> {
> struct usb_hcd *hcd = platform_get_drvdata(dev);
> struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
> + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
> + int clk;
>
> usb_remove_hcd(hcd);
> - usb_put_hcd(hcd);
>
> if (pdata->power_off)
> pdata->power_off(dev);
>
> + for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++)
> + clk_put(priv->clks[clk]);
> +
> + usb_put_hcd(hcd);
> +
> if (pdata == &ehci_platform_defaults)
> dev->dev.platform_data = NULL;
>
> @@ -207,8 +304,10 @@ static int ehci_platform_resume(struct device *dev)
> static const struct of_device_id vt8500_ehci_ids[] = {
> { .compatible = "via,vt8500-ehci", },
> { .compatible = "wm,prizm-ehci", },
> + { .compatible = "usb-ehci", },
> {}
> };
> +MODULE_DEVICE_TABLE(of, vt8500_ehci_ids);
>
> static const struct platform_device_id ehci_platform_table[] = {
> { "ehci-platform", 0 },
>
More information about the linux-arm-kernel
mailing list