[PATCH 1/1] ARM: dts: omap3-igep: fix boot fail due wrong compatible match

[Javier Martinez Canillas]

This patch is based on commit:

016c12d2 ("ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree")

and fixes a boot hang due the IGEP board being wrongly initialized
as an OMAP3430 platform instead of an OMAP3630.

Signed-off-by: Javier Martinez Canillas <javier.martinez at collabora.co.uk>
---

Tony and Benoit,

Sorry for posting this patch this late on the -rc cycle but I just didn't
have time before to test IGEP boards against 3.14.

I hope this fix can still make it to 3.14 since is a very big issue
(board not even booting).

Thanks a lot and best regards,
Javier

 arch/arm/boot/dts/omap3-igep0020.dts | 2 +-
 arch/arm/boot/dts/omap3-igep0030.dts | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index 25a2b5f..f2779ac 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "IGEPv2 (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0020", "ti,omap3";
+	compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
 
 	leds {
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 145c58c..2793749 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -13,7 +13,7 @@
 
 / {
 	model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0030", "ti,omap3";
+	compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";
 
 	leds {
 		pinctrl-names = "default";
-- 
1.8.5.3