[PATCH v3 7/7] cpufreq: exynos: remove all exynos specific cpufreq driver support
Thomas Abraham
ta.omasab at gmail.com
Fri Feb 7 10:55:48 EST 2014
From: Thomas Abraham <thomas.ab at samsung.com>
Exynos4210, Exynos4x12 and Exynos5250 based platforms have switched over
to use cpufreq-cpu0 driver for cpufreq functionality. So the Exynos
specific cpufreq drivers for these platforms can be removed.
Signed-off-by: Thomas Abraham <thomas.ab at samsung.com>
---
drivers/cpufreq/Kconfig.arm | 51 ------
drivers/cpufreq/Makefile | 4 -
drivers/cpufreq/exynos-cpufreq.c | 292 ----------------------------------
drivers/cpufreq/exynos-cpufreq.h | 91 -----------
drivers/cpufreq/exynos4210-cpufreq.c | 157 ------------------
drivers/cpufreq/exynos4x12-cpufreq.c | 211 ------------------------
drivers/cpufreq/exynos5250-cpufreq.c | 183 ---------------------
7 files changed, 989 deletions(-)
delete mode 100644 drivers/cpufreq/exynos-cpufreq.c
delete mode 100644 drivers/cpufreq/exynos-cpufreq.h
delete mode 100644 drivers/cpufreq/exynos4210-cpufreq.c
delete mode 100644 drivers/cpufreq/exynos4x12-cpufreq.c
delete mode 100644 drivers/cpufreq/exynos5250-cpufreq.c
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 3129749..38f691a 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -16,42 +16,6 @@ config ARM_DT_BL_CPUFREQ
This enables probing via DT for Generic CPUfreq driver for ARM
big.LITTLE platform. This gets frequency tables from DT.
-config ARM_EXYNOS_CPUFREQ
- bool
-
-config ARM_EXYNOS4210_CPUFREQ
- bool "SAMSUNG EXYNOS4210"
- depends on CPU_EXYNOS4210
- default y
- select ARM_EXYNOS_CPUFREQ
- help
- This adds the CPUFreq driver for Samsung EXYNOS4210
- SoC (S5PV310 or S5PC210).
-
- If in doubt, say N.
-
-config ARM_EXYNOS4X12_CPUFREQ
- bool "SAMSUNG EXYNOS4x12"
- depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412)
- default y
- select ARM_EXYNOS_CPUFREQ
- help
- This adds the CPUFreq driver for Samsung EXYNOS4X12
- SoC (EXYNOS4212 or EXYNOS4412).
-
- If in doubt, say N.
-
-config ARM_EXYNOS5250_CPUFREQ
- bool "SAMSUNG EXYNOS5250"
- depends on SOC_EXYNOS5250
- default y
- select ARM_EXYNOS_CPUFREQ
- help
- This adds the CPUFreq driver for Samsung EXYNOS5250
- SoC.
-
- If in doubt, say N.
-
config ARM_EXYNOS5440_CPUFREQ
bool "SAMSUNG EXYNOS5440"
depends on SOC_EXYNOS5440
@@ -66,21 +30,6 @@ config ARM_EXYNOS5440_CPUFREQ
If in doubt, say N.
-config ARM_EXYNOS_CPU_FREQ_BOOST_SW
- bool "EXYNOS Frequency Overclocking - Software"
- depends on ARM_EXYNOS_CPUFREQ
- select CPU_FREQ_BOOST_SW
- select EXYNOS_THERMAL
- help
- This driver supports software managed overclocking (BOOST).
- It allows usage of special frequencies for Samsung Exynos
- processors if thermal conditions are appropriate.
-
- It reguires, for safe operation, thermal framework with properly
- defined trip points.
-
- If in doubt, say N.
-
config ARM_HIGHBANK_CPUFREQ
tristate "Calxeda Highbank-based"
depends on ARCH_HIGHBANK
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 7494565..3abfe05 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -49,10 +49,6 @@ obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o
obj-$(CONFIG_ARCH_DAVINCI_DA850) += davinci-cpufreq.o
obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o
-obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o
-obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o
-obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o
-obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o
obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
deleted file mode 100644
index fcd2914..0000000
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS - CPU frequency scaling support for EXYNOS series
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/regulator/consumer.h>
-#include <linux/cpufreq.h>
-#include <linux/suspend.h>
-#include <linux/platform_device.h>
-
-#include <plat/cpu.h>
-
-#include "exynos-cpufreq.h"
-
-static struct exynos_dvfs_info *exynos_info;
-
-static struct regulator *arm_regulator;
-
-static unsigned int locking_frequency;
-static bool frequency_locked;
-static DEFINE_MUTEX(cpufreq_lock);
-
-static int exynos_cpufreq_get_index(unsigned int freq)
-{
- struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
- int index;
-
- for (index = 0;
- freq_table[index].frequency != CPUFREQ_TABLE_END; index++)
- if (freq_table[index].frequency == freq)
- break;
-
- if (freq_table[index].frequency == CPUFREQ_TABLE_END)
- return -EINVAL;
-
- return index;
-}
-
-static int exynos_cpufreq_scale(unsigned int target_freq)
-{
- struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
- unsigned int *volt_table = exynos_info->volt_table;
- struct cpufreq_policy *policy = cpufreq_cpu_get(0);
- unsigned int arm_volt, safe_arm_volt = 0;
- unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz;
- unsigned int old_freq;
- int index, old_index;
- int ret = 0;
-
- old_freq = policy->cur;
-
- /*
- * The policy max have been changed so that we cannot get proper
- * old_index with cpufreq_frequency_table_target(). Thus, ignore
- * policy and get the index from the raw frequency table.
- */
- old_index = exynos_cpufreq_get_index(old_freq);
- if (old_index < 0) {
- ret = old_index;
- goto out;
- }
-
- index = exynos_cpufreq_get_index(target_freq);
- if (index < 0) {
- ret = index;
- goto out;
- }
-
- /*
- * ARM clock source will be changed APLL to MPLL temporary
- * To support this level, need to control regulator for
- * required voltage level
- */
- if (exynos_info->need_apll_change != NULL) {
- if (exynos_info->need_apll_change(old_index, index) &&
- (freq_table[index].frequency < mpll_freq_khz) &&
- (freq_table[old_index].frequency < mpll_freq_khz))
- safe_arm_volt = volt_table[exynos_info->pll_safe_idx];
- }
- arm_volt = volt_table[index];
-
- /* When the new frequency is higher than current frequency */
- if ((target_freq > old_freq) && !safe_arm_volt) {
- /* Firstly, voltage up to increase frequency */
- ret = regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
- if (ret) {
- pr_err("%s: failed to set cpu voltage to %d\n",
- __func__, arm_volt);
- return ret;
- }
- }
-
- if (safe_arm_volt) {
- ret = regulator_set_voltage(arm_regulator, safe_arm_volt,
- safe_arm_volt);
- if (ret) {
- pr_err("%s: failed to set cpu voltage to %d\n",
- __func__, safe_arm_volt);
- return ret;
- }
- }
-
- exynos_info->set_freq(old_index, index);
-
- /* When the new frequency is lower than current frequency */
- if ((target_freq < old_freq) ||
- ((target_freq > old_freq) && safe_arm_volt)) {
- /* down the voltage after frequency change */
- ret = regulator_set_voltage(arm_regulator, arm_volt,
- arm_volt);
- if (ret) {
- pr_err("%s: failed to set cpu voltage to %d\n",
- __func__, arm_volt);
- goto out;
- }
- }
-
-out:
- cpufreq_cpu_put(policy);
-
- return ret;
-}
-
-static int exynos_target(struct cpufreq_policy *policy, unsigned int index)
-{
- struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
- int ret = 0;
-
- mutex_lock(&cpufreq_lock);
-
- if (frequency_locked)
- goto out;
-
- ret = exynos_cpufreq_scale(freq_table[index].frequency);
-
-out:
- mutex_unlock(&cpufreq_lock);
-
- return ret;
-}
-
-#ifdef CONFIG_PM
-static int exynos_cpufreq_suspend(struct cpufreq_policy *policy)
-{
- return 0;
-}
-
-static int exynos_cpufreq_resume(struct cpufreq_policy *policy)
-{
- return 0;
-}
-#endif
-
-/**
- * exynos_cpufreq_pm_notifier - block CPUFREQ's activities in suspend-resume
- * context
- * @notifier
- * @pm_event
- * @v
- *
- * While frequency_locked == true, target() ignores every frequency but
- * locking_frequency. The locking_frequency value is the initial frequency,
- * which is set by the bootloader. In order to eliminate possible
- * inconsistency in clock values, we save and restore frequencies during
- * suspend and resume and block CPUFREQ activities. Note that the standard
- * suspend/resume cannot be used as they are too deep (syscore_ops) for
- * regulator actions.
- */
-static int exynos_cpufreq_pm_notifier(struct notifier_block *notifier,
- unsigned long pm_event, void *v)
-{
- int ret;
-
- switch (pm_event) {
- case PM_SUSPEND_PREPARE:
- mutex_lock(&cpufreq_lock);
- frequency_locked = true;
- mutex_unlock(&cpufreq_lock);
-
- ret = exynos_cpufreq_scale(locking_frequency);
- if (ret < 0)
- return NOTIFY_BAD;
-
- break;
-
- case PM_POST_SUSPEND:
- mutex_lock(&cpufreq_lock);
- frequency_locked = false;
- mutex_unlock(&cpufreq_lock);
- break;
- }
-
- return NOTIFY_OK;
-}
-
-static struct notifier_block exynos_cpufreq_nb = {
- .notifier_call = exynos_cpufreq_pm_notifier,
-};
-
-static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
- policy->clk = exynos_info->cpu_clk;
- return cpufreq_generic_init(policy, exynos_info->freq_table, 100000);
-}
-
-static struct cpufreq_driver exynos_driver = {
- .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
- .verify = cpufreq_generic_frequency_table_verify,
- .target_index = exynos_target,
- .get = cpufreq_generic_get,
- .init = exynos_cpufreq_cpu_init,
- .exit = cpufreq_generic_exit,
- .name = "exynos_cpufreq",
- .attr = cpufreq_generic_attr,
-#ifdef CONFIG_ARM_EXYNOS_CPU_FREQ_BOOST_SW
- .boost_supported = true,
-#endif
-#ifdef CONFIG_PM
- .suspend = exynos_cpufreq_suspend,
- .resume = exynos_cpufreq_resume,
-#endif
-};
-
-static int exynos_cpufreq_probe(struct platform_device *pdev)
-{
- int ret = -EINVAL;
-
- exynos_info = kzalloc(sizeof(*exynos_info), GFP_KERNEL);
- if (!exynos_info)
- return -ENOMEM;
-
- if (soc_is_exynos4210())
- ret = exynos4210_cpufreq_init(exynos_info);
- else if (soc_is_exynos4212() || soc_is_exynos4412())
- ret = exynos4x12_cpufreq_init(exynos_info);
- else if (soc_is_exynos5250())
- ret = exynos5250_cpufreq_init(exynos_info);
- else
- return 0;
-
- if (ret)
- goto err_vdd_arm;
-
- if (exynos_info->set_freq == NULL) {
- pr_err("%s: No set_freq function (ERR)\n", __func__);
- goto err_vdd_arm;
- }
-
- arm_regulator = regulator_get(NULL, "vdd_arm");
- if (IS_ERR(arm_regulator)) {
- pr_err("%s: failed to get resource vdd_arm\n", __func__);
- goto err_vdd_arm;
- }
-
- locking_frequency = clk_get_rate(exynos_info->cpu_clk) / 1000;
-
- register_pm_notifier(&exynos_cpufreq_nb);
-
- if (cpufreq_register_driver(&exynos_driver)) {
- pr_err("%s: failed to register cpufreq driver\n", __func__);
- goto err_cpufreq;
- }
-
- return 0;
-err_cpufreq:
- unregister_pm_notifier(&exynos_cpufreq_nb);
-
- regulator_put(arm_regulator);
-err_vdd_arm:
- kfree(exynos_info);
- return -EINVAL;
-}
-
-static struct platform_driver exynos_cpufreq_platdrv = {
- .driver = {
- .name = "exynos-cpufreq",
- .owner = THIS_MODULE,
- },
- .probe = exynos_cpufreq_probe,
-};
-module_platform_driver(exynos_cpufreq_platdrv);
diff --git a/drivers/cpufreq/exynos-cpufreq.h b/drivers/cpufreq/exynos-cpufreq.h
deleted file mode 100644
index 3ddade8..0000000
--- a/drivers/cpufreq/exynos-cpufreq.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS - CPUFreq support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-enum cpufreq_level_index {
- L0, L1, L2, L3, L4,
- L5, L6, L7, L8, L9,
- L10, L11, L12, L13, L14,
- L15, L16, L17, L18, L19,
- L20,
-};
-
-#define APLL_FREQ(f, a0, a1, a2, a3, a4, a5, a6, a7, b0, b1, b2, m, p, s) \
- { \
- .freq = (f) * 1000, \
- .clk_div_cpu0 = ((a0) | (a1) << 4 | (a2) << 8 | (a3) << 12 | \
- (a4) << 16 | (a5) << 20 | (a6) << 24 | (a7) << 28), \
- .clk_div_cpu1 = (b0 << 0 | b1 << 4 | b2 << 8), \
- .mps = ((m) << 16 | (p) << 8 | (s)), \
- }
-
-struct apll_freq {
- unsigned int freq;
- u32 clk_div_cpu0;
- u32 clk_div_cpu1;
- u32 mps;
-};
-
-struct exynos_dvfs_info {
- unsigned long mpll_freq_khz;
- unsigned int pll_safe_idx;
- struct clk *cpu_clk;
- unsigned int *volt_table;
- struct cpufreq_frequency_table *freq_table;
- void (*set_freq)(unsigned int, unsigned int);
- bool (*need_apll_change)(unsigned int, unsigned int);
-};
-
-#ifdef CONFIG_ARM_EXYNOS4210_CPUFREQ
-extern int exynos4210_cpufreq_init(struct exynos_dvfs_info *);
-#else
-static inline int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
-{
- return -EOPNOTSUPP;
-}
-#endif
-#ifdef CONFIG_ARM_EXYNOS4X12_CPUFREQ
-extern int exynos4x12_cpufreq_init(struct exynos_dvfs_info *);
-#else
-static inline int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
-{
- return -EOPNOTSUPP;
-}
-#endif
-#ifdef CONFIG_ARM_EXYNOS5250_CPUFREQ
-extern int exynos5250_cpufreq_init(struct exynos_dvfs_info *);
-#else
-static inline int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
-{
- return -EOPNOTSUPP;
-}
-#endif
-
-#include <plat/cpu.h>
-#include <mach/map.h>
-
-#define EXYNOS4_CLKSRC_CPU (S5P_VA_CMU + 0x14200)
-#define EXYNOS4_CLKMUX_STATCPU (S5P_VA_CMU + 0x14400)
-
-#define EXYNOS4_CLKDIV_CPU (S5P_VA_CMU + 0x14500)
-#define EXYNOS4_CLKDIV_CPU1 (S5P_VA_CMU + 0x14504)
-#define EXYNOS4_CLKDIV_STATCPU (S5P_VA_CMU + 0x14600)
-#define EXYNOS4_CLKDIV_STATCPU1 (S5P_VA_CMU + 0x14604)
-
-#define EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT (16)
-#define EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)
-
-#define EXYNOS5_APLL_LOCK (S5P_VA_CMU + 0x00000)
-#define EXYNOS5_APLL_CON0 (S5P_VA_CMU + 0x00100)
-#define EXYNOS5_CLKMUX_STATCPU (S5P_VA_CMU + 0x00400)
-#define EXYNOS5_CLKDIV_CPU0 (S5P_VA_CMU + 0x00500)
-#define EXYNOS5_CLKDIV_CPU1 (S5P_VA_CMU + 0x00504)
-#define EXYNOS5_CLKDIV_STATCPU0 (S5P_VA_CMU + 0x00600)
-#define EXYNOS5_CLKDIV_STATCPU1 (S5P_VA_CMU + 0x00604)
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
deleted file mode 100644
index 40d84c4..0000000
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4210 - CPU frequency scaling support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/cpufreq.h>
-
-#include "exynos-cpufreq.h"
-
-static struct clk *cpu_clk;
-static struct clk *moutcore;
-static struct clk *mout_mpll;
-static struct clk *mout_apll;
-
-static unsigned int exynos4210_volt_table[] = {
- 1250000, 1150000, 1050000, 975000, 950000,
-};
-
-static struct cpufreq_frequency_table exynos4210_freq_table[] = {
- {L0, 1200 * 1000},
- {L1, 1000 * 1000},
- {L2, 800 * 1000},
- {L3, 500 * 1000},
- {L4, 200 * 1000},
- {0, CPUFREQ_TABLE_END},
-};
-
-static struct apll_freq apll_freq_4210[] = {
- /*
- * values:
- * freq
- * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, RESERVED
- * clock divider for COPY, HPM, RESERVED
- * PLL M, P, S
- */
- APLL_FREQ(1200, 0, 3, 7, 3, 4, 1, 7, 0, 5, 0, 0, 150, 3, 1),
- APLL_FREQ(1000, 0, 3, 7, 3, 4, 1, 7, 0, 4, 0, 0, 250, 6, 1),
- APLL_FREQ(800, 0, 3, 7, 3, 3, 1, 7, 0, 3, 0, 0, 200, 6, 1),
- APLL_FREQ(500, 0, 3, 7, 3, 3, 1, 7, 0, 3, 0, 0, 250, 6, 2),
- APLL_FREQ(200, 0, 1, 3, 1, 3, 1, 0, 0, 3, 0, 0, 200, 6, 3),
-};
-
-static void exynos4210_set_clkdiv(unsigned int div_index)
-{
- unsigned int tmp;
-
- /* Change Divider - CPU0 */
-
- tmp = apll_freq_4210[div_index].clk_div_cpu0;
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_CPU);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU);
- } while (tmp & 0x1111111);
-
- /* Change Divider - CPU1 */
-
- tmp = apll_freq_4210[div_index].clk_div_cpu1;
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_CPU1);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU1);
- } while (tmp & 0x11);
-}
-
-static void exynos4210_set_apll(unsigned int index)
-{
- unsigned int tmp, freq = apll_freq_4210[index].freq;
-
- /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
- clk_set_parent(moutcore, mout_mpll);
-
- do {
- tmp = (__raw_readl(EXYNOS4_CLKMUX_STATCPU)
- >> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
- tmp &= 0x7;
- } while (tmp != 0x2);
-
- clk_set_rate(mout_apll, freq * 1000);
-
- /* MUX_CORE_SEL = APLL */
- clk_set_parent(moutcore, mout_apll);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKMUX_STATCPU);
- tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
- } while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
-}
-
-static void exynos4210_set_frequency(unsigned int old_index,
- unsigned int new_index)
-{
- if (old_index > new_index) {
- exynos4210_set_clkdiv(new_index);
- exynos4210_set_apll(new_index);
- } else if (old_index < new_index) {
- exynos4210_set_apll(new_index);
- exynos4210_set_clkdiv(new_index);
- }
-}
-
-int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
-{
- unsigned long rate;
-
- cpu_clk = clk_get(NULL, "armclk");
- if (IS_ERR(cpu_clk))
- return PTR_ERR(cpu_clk);
-
- moutcore = clk_get(NULL, "moutcore");
- if (IS_ERR(moutcore))
- goto err_moutcore;
-
- mout_mpll = clk_get(NULL, "mout_mpll");
- if (IS_ERR(mout_mpll))
- goto err_mout_mpll;
-
- rate = clk_get_rate(mout_mpll) / 1000;
-
- mout_apll = clk_get(NULL, "mout_apll");
- if (IS_ERR(mout_apll))
- goto err_mout_apll;
-
- info->mpll_freq_khz = rate;
- /* 800Mhz */
- info->pll_safe_idx = L2;
- info->cpu_clk = cpu_clk;
- info->volt_table = exynos4210_volt_table;
- info->freq_table = exynos4210_freq_table;
- info->set_freq = exynos4210_set_frequency;
-
- return 0;
-
-err_mout_apll:
- clk_put(mout_mpll);
-err_mout_mpll:
- clk_put(moutcore);
-err_moutcore:
- clk_put(cpu_clk);
-
- pr_debug("%s: failed initialization\n", __func__);
- return -EINVAL;
-}
diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c
deleted file mode 100644
index 7c11ace..0000000
--- a/drivers/cpufreq/exynos4x12-cpufreq.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4X12 - CPU frequency scaling support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/cpufreq.h>
-
-#include "exynos-cpufreq.h"
-
-static struct clk *cpu_clk;
-static struct clk *moutcore;
-static struct clk *mout_mpll;
-static struct clk *mout_apll;
-
-static unsigned int exynos4x12_volt_table[] = {
- 1350000, 1287500, 1250000, 1187500, 1137500, 1087500, 1037500,
- 1000000, 987500, 975000, 950000, 925000, 900000, 900000
-};
-
-static struct cpufreq_frequency_table exynos4x12_freq_table[] = {
- {CPUFREQ_BOOST_FREQ, 1500 * 1000},
- {L1, 1400 * 1000},
- {L2, 1300 * 1000},
- {L3, 1200 * 1000},
- {L4, 1100 * 1000},
- {L5, 1000 * 1000},
- {L6, 900 * 1000},
- {L7, 800 * 1000},
- {L8, 700 * 1000},
- {L9, 600 * 1000},
- {L10, 500 * 1000},
- {L11, 400 * 1000},
- {L12, 300 * 1000},
- {L13, 200 * 1000},
- {0, CPUFREQ_TABLE_END},
-};
-
-static struct apll_freq *apll_freq_4x12;
-
-static struct apll_freq apll_freq_4212[] = {
- /*
- * values:
- * freq
- * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, CORE2
- * clock divider for COPY, HPM, RESERVED
- * PLL M, P, S
- */
- APLL_FREQ(1500, 0, 3, 7, 0, 6, 1, 2, 0, 6, 2, 0, 250, 4, 0),
- APLL_FREQ(1400, 0, 3, 7, 0, 6, 1, 2, 0, 6, 2, 0, 175, 3, 0),
- APLL_FREQ(1300, 0, 3, 7, 0, 5, 1, 2, 0, 5, 2, 0, 325, 6, 0),
- APLL_FREQ(1200, 0, 3, 7, 0, 5, 1, 2, 0, 5, 2, 0, 200, 4, 0),
- APLL_FREQ(1100, 0, 3, 6, 0, 4, 1, 2, 0, 4, 2, 0, 275, 6, 0),
- APLL_FREQ(1000, 0, 2, 5, 0, 4, 1, 1, 0, 4, 2, 0, 125, 3, 0),
- APLL_FREQ(900, 0, 2, 5, 0, 3, 1, 1, 0, 3, 2, 0, 150, 4, 0),
- APLL_FREQ(800, 0, 2, 5, 0, 3, 1, 1, 0, 3, 2, 0, 100, 3, 0),
- APLL_FREQ(700, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 175, 3, 1),
- APLL_FREQ(600, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 200, 4, 1),
- APLL_FREQ(500, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 125, 3, 1),
- APLL_FREQ(400, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 100, 3, 1),
- APLL_FREQ(300, 0, 2, 4, 0, 2, 1, 1, 0, 3, 2, 0, 200, 4, 2),
- APLL_FREQ(200, 0, 1, 3, 0, 1, 1, 1, 0, 3, 2, 0, 100, 3, 2),
-};
-
-static struct apll_freq apll_freq_4412[] = {
- /*
- * values:
- * freq
- * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, CORE2
- * clock divider for COPY, HPM, CORES
- * PLL M, P, S
- */
- APLL_FREQ(1500, 0, 3, 7, 0, 6, 1, 2, 0, 6, 0, 7, 250, 4, 0),
- APLL_FREQ(1400, 0, 3, 7, 0, 6, 1, 2, 0, 6, 0, 6, 175, 3, 0),
- APLL_FREQ(1300, 0, 3, 7, 0, 5, 1, 2, 0, 5, 0, 6, 325, 6, 0),
- APLL_FREQ(1200, 0, 3, 7, 0, 5, 1, 2, 0, 5, 0, 5, 200, 4, 0),
- APLL_FREQ(1100, 0, 3, 6, 0, 4, 1, 2, 0, 4, 0, 5, 275, 6, 0),
- APLL_FREQ(1000, 0, 2, 5, 0, 4, 1, 1, 0, 4, 0, 4, 125, 3, 0),
- APLL_FREQ(900, 0, 2, 5, 0, 3, 1, 1, 0, 3, 0, 4, 150, 4, 0),
- APLL_FREQ(800, 0, 2, 5, 0, 3, 1, 1, 0, 3, 0, 3, 100, 3, 0),
- APLL_FREQ(700, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 3, 175, 3, 1),
- APLL_FREQ(600, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 2, 200, 4, 1),
- APLL_FREQ(500, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 2, 125, 3, 1),
- APLL_FREQ(400, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 1, 100, 3, 1),
- APLL_FREQ(300, 0, 2, 4, 0, 2, 1, 1, 0, 3, 0, 1, 200, 4, 2),
- APLL_FREQ(200, 0, 1, 3, 0, 1, 1, 1, 0, 3, 0, 0, 100, 3, 2),
-};
-
-static void exynos4x12_set_clkdiv(unsigned int div_index)
-{
- unsigned int tmp;
- unsigned int stat_cpu1;
-
- /* Change Divider - CPU0 */
-
- tmp = apll_freq_4x12[div_index].clk_div_cpu0;
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_CPU);
-
- while (__raw_readl(EXYNOS4_CLKDIV_STATCPU) & 0x11111111)
- cpu_relax();
-
- /* Change Divider - CPU1 */
- tmp = apll_freq_4x12[div_index].clk_div_cpu1;
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_CPU1);
- if (soc_is_exynos4212())
- stat_cpu1 = 0x11;
- else
- stat_cpu1 = 0x111;
-
- while (__raw_readl(EXYNOS4_CLKDIV_STATCPU1) & stat_cpu1)
- cpu_relax();
-}
-
-static void exynos4x12_set_apll(unsigned int index)
-{
- unsigned int tmp, freq = apll_freq_4x12[index].freq;
-
- /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
- clk_set_parent(moutcore, mout_mpll);
-
- do {
- cpu_relax();
- tmp = (__raw_readl(EXYNOS4_CLKMUX_STATCPU)
- >> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
- tmp &= 0x7;
- } while (tmp != 0x2);
-
- clk_set_rate(mout_apll, freq * 1000);
-
- /* MUX_CORE_SEL = APLL */
- clk_set_parent(moutcore, mout_apll);
-
- do {
- cpu_relax();
- tmp = __raw_readl(EXYNOS4_CLKMUX_STATCPU);
- tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
- } while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
-}
-
-static void exynos4x12_set_frequency(unsigned int old_index,
- unsigned int new_index)
-{
- if (old_index > new_index) {
- exynos4x12_set_clkdiv(new_index);
- exynos4x12_set_apll(new_index);
- } else if (old_index < new_index) {
- exynos4x12_set_apll(new_index);
- exynos4x12_set_clkdiv(new_index);
- }
-}
-
-int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
-{
- unsigned long rate;
-
- cpu_clk = clk_get(NULL, "armclk");
- if (IS_ERR(cpu_clk))
- return PTR_ERR(cpu_clk);
-
- moutcore = clk_get(NULL, "moutcore");
- if (IS_ERR(moutcore))
- goto err_moutcore;
-
- mout_mpll = clk_get(NULL, "mout_mpll");
- if (IS_ERR(mout_mpll))
- goto err_mout_mpll;
-
- rate = clk_get_rate(mout_mpll) / 1000;
-
- mout_apll = clk_get(NULL, "mout_apll");
- if (IS_ERR(mout_apll))
- goto err_mout_apll;
-
- if (soc_is_exynos4212())
- apll_freq_4x12 = apll_freq_4212;
- else
- apll_freq_4x12 = apll_freq_4412;
-
- info->mpll_freq_khz = rate;
- /* 800Mhz */
- info->pll_safe_idx = L7;
- info->cpu_clk = cpu_clk;
- info->volt_table = exynos4x12_volt_table;
- info->freq_table = exynos4x12_freq_table;
- info->set_freq = exynos4x12_set_frequency;
-
- return 0;
-
-err_mout_apll:
- clk_put(mout_mpll);
-err_mout_mpll:
- clk_put(moutcore);
-err_moutcore:
- clk_put(cpu_clk);
-
- pr_debug("%s: failed initialization\n", __func__);
- return -EINVAL;
-}
diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c
deleted file mode 100644
index 5f90b82..0000000
--- a/drivers/cpufreq/exynos5250-cpufreq.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * Copyright (c) 2010-20122Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS5250 - CPU frequency scaling support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/cpufreq.h>
-
-#include <mach/map.h>
-
-#include "exynos-cpufreq.h"
-
-static struct clk *cpu_clk;
-static struct clk *moutcore;
-static struct clk *mout_mpll;
-static struct clk *mout_apll;
-
-static unsigned int exynos5250_volt_table[] = {
- 1300000, 1250000, 1225000, 1200000, 1150000,
- 1125000, 1100000, 1075000, 1050000, 1025000,
- 1012500, 1000000, 975000, 950000, 937500,
- 925000
-};
-
-static struct cpufreq_frequency_table exynos5250_freq_table[] = {
- {L0, 1700 * 1000},
- {L1, 1600 * 1000},
- {L2, 1500 * 1000},
- {L3, 1400 * 1000},
- {L4, 1300 * 1000},
- {L5, 1200 * 1000},
- {L6, 1100 * 1000},
- {L7, 1000 * 1000},
- {L8, 900 * 1000},
- {L9, 800 * 1000},
- {L10, 700 * 1000},
- {L11, 600 * 1000},
- {L12, 500 * 1000},
- {L13, 400 * 1000},
- {L14, 300 * 1000},
- {L15, 200 * 1000},
- {0, CPUFREQ_TABLE_END},
-};
-
-static struct apll_freq apll_freq_5250[] = {
- /*
- * values:
- * freq
- * clock divider for ARM, CPUD, ACP, PERIPH, ATB, PCLK_DBG, APLL, ARM2
- * clock divider for COPY, HPM, RESERVED
- * PLL M, P, S
- */
- APLL_FREQ(1700, 0, 3, 7, 7, 7, 3, 5, 0, 0, 2, 0, 425, 6, 0),
- APLL_FREQ(1600, 0, 3, 7, 7, 7, 1, 4, 0, 0, 2, 0, 200, 3, 0),
- APLL_FREQ(1500, 0, 2, 7, 7, 7, 1, 4, 0, 0, 2, 0, 250, 4, 0),
- APLL_FREQ(1400, 0, 2, 7, 7, 6, 1, 4, 0, 0, 2, 0, 175, 3, 0),
- APLL_FREQ(1300, 0, 2, 7, 7, 6, 1, 3, 0, 0, 2, 0, 325, 6, 0),
- APLL_FREQ(1200, 0, 2, 7, 7, 5, 1, 3, 0, 0, 2, 0, 200, 4, 0),
- APLL_FREQ(1100, 0, 3, 7, 7, 5, 1, 3, 0, 0, 2, 0, 275, 6, 0),
- APLL_FREQ(1000, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 125, 3, 0),
- APLL_FREQ(900, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 150, 4, 0),
- APLL_FREQ(800, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 100, 3, 0),
- APLL_FREQ(700, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 175, 3, 1),
- APLL_FREQ(600, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 200, 4, 1),
- APLL_FREQ(500, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 125, 3, 1),
- APLL_FREQ(400, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 100, 3, 1),
- APLL_FREQ(300, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 200, 4, 2),
- APLL_FREQ(200, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 100, 3, 2),
-};
-
-static void set_clkdiv(unsigned int div_index)
-{
- unsigned int tmp;
-
- /* Change Divider - CPU0 */
-
- tmp = apll_freq_5250[div_index].clk_div_cpu0;
-
- __raw_writel(tmp, EXYNOS5_CLKDIV_CPU0);
-
- while (__raw_readl(EXYNOS5_CLKDIV_STATCPU0) & 0x11111111)
- cpu_relax();
-
- /* Change Divider - CPU1 */
- tmp = apll_freq_5250[div_index].clk_div_cpu1;
-
- __raw_writel(tmp, EXYNOS5_CLKDIV_CPU1);
-
- while (__raw_readl(EXYNOS5_CLKDIV_STATCPU1) & 0x11)
- cpu_relax();
-}
-
-static void set_apll(unsigned int index)
-{
- unsigned int tmp;
- unsigned int freq = apll_freq_5250[index].freq;
-
- /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
- clk_set_parent(moutcore, mout_mpll);
-
- do {
- cpu_relax();
- tmp = (__raw_readl(EXYNOS5_CLKMUX_STATCPU) >> 16);
- tmp &= 0x7;
- } while (tmp != 0x2);
-
- clk_set_rate(mout_apll, freq * 1000);
-
- /* MUX_CORE_SEL = APLL */
- clk_set_parent(moutcore, mout_apll);
-
- do {
- cpu_relax();
- tmp = __raw_readl(EXYNOS5_CLKMUX_STATCPU);
- tmp &= (0x7 << 16);
- } while (tmp != (0x1 << 16));
-}
-
-static void exynos5250_set_frequency(unsigned int old_index,
- unsigned int new_index)
-{
- if (old_index > new_index) {
- set_clkdiv(new_index);
- set_apll(new_index);
- } else if (old_index < new_index) {
- set_apll(new_index);
- set_clkdiv(new_index);
- }
-}
-
-int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
-{
- unsigned long rate;
-
- cpu_clk = clk_get(NULL, "armclk");
- if (IS_ERR(cpu_clk))
- return PTR_ERR(cpu_clk);
-
- moutcore = clk_get(NULL, "mout_cpu");
- if (IS_ERR(moutcore))
- goto err_moutcore;
-
- mout_mpll = clk_get(NULL, "mout_mpll");
- if (IS_ERR(mout_mpll))
- goto err_mout_mpll;
-
- rate = clk_get_rate(mout_mpll) / 1000;
-
- mout_apll = clk_get(NULL, "mout_apll");
- if (IS_ERR(mout_apll))
- goto err_mout_apll;
-
- info->mpll_freq_khz = rate;
- /* 800Mhz */
- info->pll_safe_idx = L9;
- info->cpu_clk = cpu_clk;
- info->volt_table = exynos5250_volt_table;
- info->freq_table = exynos5250_freq_table;
- info->set_freq = exynos5250_set_frequency;
-
- return 0;
-
-err_mout_apll:
- clk_put(mout_mpll);
-err_mout_mpll:
- clk_put(moutcore);
-err_moutcore:
- clk_put(cpu_clk);
-
- pr_err("%s: failed initialization\n", __func__);
- return -EINVAL;
-}
--
1.7.10.4
More information about the linux-arm-kernel
mailing list