[PATCH v2 08/15] mfd: max77836: Add max77836 support to max14577 driver

[Krzysztof Kozlowski]

On Fri, 2014-02-07 at 10:49 +0000, Lee Jones wrote:
> > Add Maxim 77836 support to max14577 driver. The chipsets have same MUIC
> > component so the extcon, charger and regulators are almost the same. The
> > max77836 however has also PMIC and Fuel Gauge.
> > 
> > The MAX77836 uses three I2C slave addresses and has additional interrupts
> > (related to PMIC and Fuel Gauge). It has also Interrupt Source register,
> > just like MAX77686 and MAX77693.
> > 
> > The MAX77836 PMIC's TOPSYS and INTSRC interrupts are reported in the
> > PMIC block. The PMIC block has different I2C slave address and uses own
> > regmap so another regmap_irq_chip is needed.
> > 
> > Since we have two regmap_irq_chip, use shared interrupts on MAX77836.
> > 
> > This patch adds additional defines and functions to the max14577 MFD core
> > driver so the driver will handle both chipsets. Also this patch replaces
> > "0x1 << N" with BIT(N) in defines for register masks.
> > 
> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
> > Signed-off-by: Chanwoo Choi <cw00.choi at samsung.com>
> 
> My Ack is missing from this patch too.
> 
> ... and probably all the others? How will I know which ones I've
> already Acked without reviewing them all again?

I already added your ACK-s to patches which got them. Unfortunately the
numbering of patches changed because 4 of them were applied and 1 was
dropped.

This particular patch (previously: 13/18) haven't got you ACK because
you've pointed some issues to fix.

Best regards,
Krzysztof