[PATCH v2 08/15] mfd: max77836: Add max77836 support to max14577 driver

[Lee Jones]

> Add Maxim 77836 support to max14577 driver. The chipsets have same MUIC
> component so the extcon, charger and regulators are almost the same. The
> max77836 however has also PMIC and Fuel Gauge.
> 
> The MAX77836 uses three I2C slave addresses and has additional interrupts
> (related to PMIC and Fuel Gauge). It has also Interrupt Source register,
> just like MAX77686 and MAX77693.
> 
> The MAX77836 PMIC's TOPSYS and INTSRC interrupts are reported in the
> PMIC block. The PMIC block has different I2C slave address and uses own
> regmap so another regmap_irq_chip is needed.
> 
> Since we have two regmap_irq_chip, use shared interrupts on MAX77836.
> 
> This patch adds additional defines and functions to the max14577 MFD core
> driver so the driver will handle both chipsets. Also this patch replaces
> "0x1 << N" with BIT(N) in defines for register masks.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
> Signed-off-by: Chanwoo Choi <cw00.choi at samsung.com>
> Cc: Kyungmin Park <kyungmin.park at samsung.com>
> Cc: Marek Szyprowski <m.szyprowski at samsung.com>
> ---
>  drivers/mfd/max14577.c               |  217 ++++++++++++++++++++++++++++++++--
>  include/linux/mfd/max14577-private.h |  175 +++++++++++++++++++--------
>  include/linux/mfd/max14577.h         |    7 +-
>  3 files changed, 341 insertions(+), 58 deletions(-)

Much better, thanks.
  Acked-by: Lee Jones <lee.jones at linaro.org>

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog