[PATCH v2 4/5] clk: samsung: add clock controller driver for s3c2412
Heiko Stübner
heiko at sntech.de
Sat Feb 22 17:49:40 EST 2014
This driver can handle the clock controller in the s3c2412 soc.
The clock structure is built according to the manuals of the included
SoCs and might include changes in comparison to the previous clock
structure.
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
drivers/clk/samsung/Makefile | 1 +
drivers/clk/samsung/clk-s3c2412.c | 268 ++++++++++++++++++++++++++++++++++++
include/dt-bindings/clock/s3c2412.h | 73 ++++++++++
3 files changed, 342 insertions(+)
create mode 100644 drivers/clk/samsung/clk-s3c2412.c
create mode 100644 include/dt-bindings/clock/s3c2412.h
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 4c892c6..77313e2 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -8,5 +8,6 @@ obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o
obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o
obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o
obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o
+obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o
obj-$(CONFIG_S3C2443_COMMON_CLK)+= clk-s3c2443.o
obj-$(CONFIG_ARCH_S3C64XX) += clk-s3c64xx.o
diff --git a/drivers/clk/samsung/clk-s3c2412.c b/drivers/clk/samsung/clk-s3c2412.c
new file mode 100644
index 0000000..1a3e43b
--- /dev/null
+++ b/drivers/clk/samsung/clk-s3c2412.c
@@ -0,0 +1,269 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko at sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for S3C2412 and S3C2413.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/s3c2412.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+#define LOCKTIME 0x00
+#define MPLLCON 0x04
+#define UPLLCON 0x08
+#define CLKCON 0x0c
+#define CLKDIVN 0x14
+#define CLKSRC 0x1c
+
+/* list of PLLs to be registered */
+enum s3c2412_plls {
+ mpll, upll,
+};
+
+static void __iomem *reg_base;
+
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *s3c2412_save;
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static unsigned long s3c2412_clk_regs[] __initdata = {
+ LOCKTIME,
+ MPLLCON,
+ UPLLCON,
+ CLKCON,
+ CLKDIVN,
+ CLKSRC,
+};
+
+static int s3c2412_clk_suspend(void)
+{
+ samsung_clk_save(reg_base, s3c2412_save,
+ ARRAY_SIZE(s3c2412_clk_regs));
+
+ return 0;
+}
+
+static void s3c2412_clk_resume(void)
+{
+ samsung_clk_restore(reg_base, s3c2412_save,
+ ARRAY_SIZE(s3c2412_clk_regs));
+}
+
+static struct syscore_ops s3c2412_clk_syscore_ops = {
+ .suspend = s3c2412_clk_suspend,
+ .resume = s3c2412_clk_resume,
+};
+
+static void s3c2412_clk_sleep_init(void)
+{
+ s3c2412_save = samsung_clk_alloc_reg_dump(s3c2412_clk_regs,
+ ARRAY_SIZE(s3c2412_clk_regs));
+ if (!s3c2412_save) {
+ pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+ __func__);
+ return;
+ }
+
+ register_syscore_ops(&s3c2412_clk_syscore_ops);
+ return;
+}
+#else
+static void s3c2412_clk_sleep_init(void) {}
+#endif
+
+static struct clk_div_table divxti_d[] = {
+ { .val = 0, .div = 1 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 4 },
+ { .val = 3, .div = 6 },
+ { .val = 4, .div = 8 },
+ { .val = 5, .div = 10 },
+ { .val = 6, .div = 12 },
+ { .val = 7, .div = 14 },
+ { /* sentinel */ },
+};
+
+struct samsung_div_clock s3c2412_dividers[] __initdata = {
+ DIV_T(0, "div_xti", "xti", CLKSRC, 0, 3, divxti_d),
+ DIV(0, "div_cam", "mux_cam", CLKDIVN, 16, 4),
+ DIV(0, "div_i2s", "mux_i2s", CLKDIVN, 12, 4),
+ DIV(0, "div_uart", "mux_uart", CLKDIVN, 8, 4),
+ DIV(0, "div_usb", "mux_usb", CLKDIVN, 6, 1),
+ DIV(0, "div_hclk_half", "hclk", CLKDIVN, 5, 1),
+ DIV(ARMDIV, "armdiv", "msysclk", CLKDIVN, 3, 1),
+ DIV(PCLK, "pclk", "hclk", CLKDIVN, 2, 1),
+ DIV(HCLK, "hclk", "armdiv", CLKDIVN, 0, 2),
+};
+
+struct samsung_fixed_factor_clock s3c2412_ffactor[] __initdata = {
+ FFACTOR(0, "ff_hclk", "hclk", 2, 1, CLK_SET_RATE_PARENT),
+};
+
+/*
+ * The first two use the OM[4] setting, which is not readable from
+ * software, so assume it is set to xti.
+ */
+PNAME(erefclk_p) = { "xti", "xti", "xti", "ext" };
+PNAME(urefclk_p) = { "xti", "xti", "xti", "ext" };
+
+PNAME(camclk_p) = { "usysclk", "hclk" };
+PNAME(usbclk_p) = { "usysclk", "hclk" };
+PNAME(i2sclk_p) = { "erefclk", "mpll" };
+PNAME(uartclk_p) = { "erefclk", "mpll" };
+PNAME(usysclk_p) = { "urefclk", "upll" };
+PNAME(msysclk_p) = { "mdivclk", "mpll" };
+PNAME(mdivclk_p) = { "xti", "div_xti" };
+PNAME(armclk_p) = { "armdiv", "hclk" };
+
+struct samsung_mux_clock s3c2412_muxes[] __initdata = {
+ MUX(0, "erefclk", erefclk_p, CLKSRC, 14, 2),
+ MUX(0, "urefclk", urefclk_p, CLKSRC, 12, 2),
+ MUX(0, "mux_cam", camclk_p, CLKSRC, 11, 1),
+ MUX(0, "mux_usb", usbclk_p, CLKSRC, 10, 1),
+ MUX(0, "mux_i2s", i2sclk_p, CLKSRC, 9, 1),
+ MUX(0, "mux_uart", uartclk_p, CLKSRC, 8, 1),
+ MUX(USYSCLK, "usysclk", usysclk_p, CLKSRC, 5, 1),
+ MUX(MSYSCLK, "msysclk", msysclk_p, CLKSRC, 4, 1),
+ MUX(MDIVCLK, "mdivclk", mdivclk_p, CLKSRC, 3, 1),
+ MUX(ARMCLK, "armclk", armclk_p, CLKDIVN, 4, 1),
+};
+
+static struct samsung_pll_clock s3c2412_plls[] __initdata = {
+ [mpll] = PLL(pll_s3c2440_mpll, MPLL, "mpll", "xti",
+ LOCKTIME, MPLLCON, NULL),
+ [upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "urefclk",
+ LOCKTIME, UPLLCON, NULL),
+};
+
+struct samsung_gate_clock s3c2412_gates[] __initdata = {
+ GATE(PCLK_WDT, "wdt", "pclk", CLKCON, 28, 0, 0),
+ GATE(PCLK_SPI, "spi", "pclk", CLKCON, 27, 0, 0),
+ GATE(PCLK_I2S, "i2s", "pclk", CLKCON, 26, 0, 0),
+ GATE(PCLK_I2C, "i2c", "pclk", CLKCON, 25, 0, 0),
+ GATE(PCLK_ADC, "adc", "pclk", CLKCON, 24, 0, 0),
+ GATE(PCLK_RTC, "rtc", "pclk", CLKCON, 23, 0, 0),
+ GATE(PCLK_GPIO, "gpio", "pclk", CLKCON, 22, CLK_IGNORE_UNUSED, 0),
+ GATE(PCLK_UART2, "uart2", "pclk", CLKCON, 21, 0, 0),
+ GATE(PCLK_UART1, "uart1", "pclk", CLKCON, 20, 0, 0),
+ GATE(PCLK_UART0, "uart0", "pclk", CLKCON, 19, 0, 0),
+ GATE(PCLK_SDI, "sdi", "pclk", CLKCON, 18, 0, 0),
+ GATE(PCLK_PWM, "pwm", "pclk", CLKCON, 17, 0, 0),
+ GATE(PCLK_USBD, "usb-device", "pclk", CLKCON, 16, 0, 0),
+ GATE(SCLK_CAM, "sclk_cam", "div_cam", CLKCON, 15, 0, 0),
+ GATE(SCLK_UART, "sclk_uart", "div_uart", CLKCON, 14, 0, 0),
+ GATE(SCLK_I2S, "sclk_i2s", "div_i2s", CLKCON, 13, 0, 0),
+ GATE(SCLK_USBH, "sclk_usbh", "div_usb", CLKCON, 12, 0, 0),
+ GATE(SCLK_USBD, "sclk_usbd", "div_usb", CLKCON, 11, 0, 0),
+ GATE(HCLK_HALF, "hclk_half", "div_hclk_half", CLKCON, 10, CLK_IGNORE_UNUSED, 0),
+ GATE(HCLK_X2, "hclkx2", "ff_hclk", CLKCON, 9, CLK_IGNORE_UNUSED, 0),
+ GATE(HCLK_SDRAM, "sdram", "hclk", CLKCON, 8, CLK_IGNORE_UNUSED, 0),
+ GATE(HCLK_USBH, "usb-host", "hclk", CLKCON, 6, 0, 0),
+ GATE(HCLK_LCD, "lcd", "hclk", CLKCON, 5, 0, 0),
+ GATE(HCLK_NAND, "nand", "hclk", CLKCON, 4, 0, 0),
+ GATE(HCLK_DMA3, "dma3", "hclk", CLKCON, 3, CLK_IGNORE_UNUSED, 0),
+ GATE(HCLK_DMA2, "dma2", "hclk", CLKCON, 2, CLK_IGNORE_UNUSED, 0),
+ GATE(HCLK_DMA1, "dma1", "hclk", CLKCON, 1, CLK_IGNORE_UNUSED, 0),
+ GATE(HCLK_DMA0, "dma0", "hclk", CLKCON, 0, CLK_IGNORE_UNUSED, 0),
+};
+
+struct samsung_clock_alias s3c2412_aliases[] __initdata = {
+ ALIAS(PCLK_UART0, "s3c2412-uart.0", "uart"),
+ ALIAS(PCLK_UART1, "s3c2412-uart.1", "uart"),
+ ALIAS(PCLK_UART2, "s3c2412-uart.2", "uart"),
+ ALIAS(PCLK_UART0, "s3c2412-uart.0", "clk_uart_baud2"),
+ ALIAS(PCLK_UART1, "s3c2412-uart.1", "clk_uart_baud2"),
+ ALIAS(PCLK_UART2, "s3c2412-uart.2", "clk_uart_baud2"),
+ ALIAS(SCLK_UART, NULL, "clk_uart_baud3"),
+ ALIAS(PCLK_I2C, "s3c2410-i2c.0", "i2c"),
+ ALIAS(PCLK_ADC, NULL, "adc"),
+ ALIAS(PCLK_RTC, NULL, "rtc"),
+ ALIAS(PCLK_PWM, NULL, "timers"),
+ ALIAS(HCLK_LCD, NULL, "lcd"),
+ ALIAS(PCLK_USBD, NULL, "usb-device"),
+ ALIAS(SCLK_USBD, NULL, "usb-bus-gadget"),
+ ALIAS(HCLK_USBH, NULL, "usb-host"),
+ ALIAS(SCLK_USBH, NULL, "usb-bus-host"),
+ ALIAS(ARMCLK, NULL, "armclk"),
+ ALIAS(HCLK, NULL, "hclk"),
+ ALIAS(MPLL, NULL, "mpll"),
+ ALIAS(MSYSCLK, NULL, "fclk"),
+};
+
+/*
+ * fixed rate clocks generated outside the soc
+ * Only necessary until the devicetree-move is complete
+ */
+#define XTI 1
+struct samsung_fixed_rate_clock s3c2412_common_frate_clks[] __initdata = {
+ FRATE(XTI, "xti", NULL, CLK_IS_ROOT, 0),
+ FRATE(0, "ext", NULL, CLK_IS_ROOT, 0),
+};
+
+static void __init s3c2412_common_clk_register_fixed_ext(unsigned long xti_f,
+ unsigned long ext_f)
+{
+ /* xtal alias is necessary for the current cpufreq driver */
+ struct samsung_clock_alias xti_alias = ALIAS(XTI, NULL, "xtal");
+
+ s3c2412_common_frate_clks[0].fixed_rate = xti_f;
+ s3c2412_common_frate_clks[1].fixed_rate = ext_f;
+ samsung_clk_register_fixed_rate(s3c2412_common_frate_clks,
+ ARRAY_SIZE(s3c2412_common_frate_clks));
+
+ samsung_clk_register_alias(&xti_alias, 1);
+}
+
+void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
+ unsigned long ext_f, void __iomem *base)
+{
+ reg_base = base;
+
+ if (np) {
+ reg_base = of_iomap(np, 0);
+ if (!reg_base)
+ panic("%s: failed to map registers\n", __func__);
+ }
+
+ samsung_clk_init(np, reg_base, NR_CLKS);
+
+ /* Register external clocks only in non-dt cases */
+ if (!np)
+ s3c2412_common_clk_register_fixed_ext(xti_f, ext_f);
+
+ /* Register PLLs. */
+ samsung_clk_register_pll(s3c2412_plls, ARRAY_SIZE(s3c2412_plls),
+ reg_base);
+
+ /* Register common internal clocks. */
+ samsung_clk_register_mux(s3c2412_muxes, ARRAY_SIZE(s3c2412_muxes));
+ samsung_clk_register_div(s3c2412_dividers,
+ ARRAY_SIZE(s3c2412_dividers));
+ samsung_clk_register_gate(s3c2412_gates, ARRAY_SIZE(s3c2412_gates));
+ samsung_clk_register_fixed_factor(s3c2412_ffactor,
+ ARRAY_SIZE(s3c2412_ffactor));
+ samsung_clk_register_alias(s3c2412_aliases,
+ ARRAY_SIZE(s3c2412_aliases));
+
+ s3c2412_clk_sleep_init();
+}
+
+static void __init s3c2412_clk_init(struct device_node *np)
+{
+ s3c2412_common_clk_init(np, 0, 0, 0);
+}
+CLK_OF_DECLARE(s3c2412_clk, "samsung,s3c2412-clock", s3c2412_clk_init);
diff --git a/include/dt-bindings/clock/s3c2412.h b/include/dt-bindings/clock/s3c2412.h
new file mode 100644
index 0000000..aac1dcf
--- /dev/null
+++ b/include/dt-bindings/clock/s3c2412.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko at sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants clock controllers of Samsung S3C2412.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H
+#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H
+
+/*
+ * Let each exported clock get a unique index, which is used on DT-enabled
+ * platforms to lookup the clock from a clock specifier. These indices are
+ * therefore considered an ABI and so must not be changed. This implies
+ * that new clocks should be added either in free spaces between clock groups
+ * or at the end.
+ */
+
+/* Core clocks. */
+
+/* id 1 is reserved */
+#define MPLL 2
+#define UPLL 3
+#define MDIVCLK 4
+#define MSYSCLK 5
+#define USYSCLK 6
+#define HCLK 7
+#define PCLK 8
+#define ARMDIV 9
+#define ARMCLK 10
+
+
+/* Special clocks */
+#define SCLK_CAM 16
+#define SCLK_UART 17
+#define SCLK_I2S 18
+#define SCLK_USBD 19
+#define SCLK_USBH 20
+
+/* pclk-gates */
+#define PCLK_WDT 32
+#define PCLK_SPI 33
+#define PCLK_I2S 34
+#define PCLK_I2C 35
+#define PCLK_ADC 36
+#define PCLK_RTC 37
+#define PCLK_GPIO 38
+#define PCLK_UART2 39
+#define PCLK_UART1 40
+#define PCLK_UART0 41
+#define PCLK_SDI 42
+#define PCLK_PWM 43
+#define PCLK_USBD 44
+
+/* hclk-gates */
+#define HCLK_HALF 48
+#define HCLK_X2 49
+#define HCLK_SDRAM 50
+#define HCLK_USBH 51
+#define HCLK_LCD 52
+#define HCLK_NAND 53
+#define HCLK_DMA3 54
+#define HCLK_DMA2 55
+#define HCLK_DMA1 56
+#define HCLK_DMA0 57
+
+/* Total number of clocks. */
+#define NR_CLKS (HCLK_DMA0 + 1)
+
+#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H */
--
1.8.5.3
More information about the linux-arm-kernel
mailing list