[PATCH v8 03/14] mfd: omap-usb-host: Use clock names as per function for reference clocks

[Lee Jones]

> Use a meaningful name for the reference clocks so that it indicates the function.
> 
> CC: Lee Jones <lee.jones at linaro.org>
> CC: Samuel Ortiz <sameo at linux.intel.com>
> Signed-off-by: Roger Quadros <rogerq at ti.com>
> ---
>  drivers/mfd/omap-usb-host.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
> index 865c276..651e249 100644
> --- a/drivers/mfd/omap-usb-host.c
> +++ b/drivers/mfd/omap-usb-host.c
> @@ -718,24 +718,24 @@ static int usbhs_omap_probe(struct platform_device *pdev)
>  		goto err_mem;
>  	}
>  
> -	omap->xclk60mhsp1_ck = devm_clk_get(dev, "xclk60mhsp1_ck");
> +	omap->xclk60mhsp1_ck = devm_clk_get(dev, "refclk_60m_ext_p1");
>  	if (IS_ERR(omap->xclk60mhsp1_ck)) {
>  		ret = PTR_ERR(omap->xclk60mhsp1_ck);
> -		dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
> +		dev_err(dev, "refclk_60m_ext_p1 failed error:%d\n", ret);
>  		goto err_mem;
>  	}

Will anything break if I were to apply the MFD patches seperately?

> -	omap->xclk60mhsp2_ck = devm_clk_get(dev, "xclk60mhsp2_ck");
> +	omap->xclk60mhsp2_ck = devm_clk_get(dev, "refclk_60m_ext_p2");
>  	if (IS_ERR(omap->xclk60mhsp2_ck)) {
>  		ret = PTR_ERR(omap->xclk60mhsp2_ck);
> -		dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
> +		dev_err(dev, "refclk_60m_ext_p2 failed error:%d\n", ret);
>  		goto err_mem;
>  	}
>  
> -	omap->init_60m_fclk = devm_clk_get(dev, "init_60m_fclk");
> +	omap->init_60m_fclk = devm_clk_get(dev, "refclk_60m_int");
>  	if (IS_ERR(omap->init_60m_fclk)) {
>  		ret = PTR_ERR(omap->init_60m_fclk);
> -		dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
> +		dev_err(dev, "refclk_60m_int failed error:%d\n", ret);
>  		goto err_mem;
>  	}
>  

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog