[PATCH v2 1/5] ARM: Kirkwood: Add audio node to kirkwood.dtsi

[Jason Cooper]

On Mon, Feb 24, 2014 at 07:01:34PM +0100, Andrew Lunn wrote:
> The binding has existed for a while, so add the missing node so it can
> be used by devices.
> 
> Signed-off-by: Andrew Lunn <andrew at lunn.ch>
> ---
> v2:
> Tabify
> ---
>  arch/arm/boot/dts/kirkwood.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
> index 7b921b30cfcb..180dc69ff742 100644
> --- a/arch/arm/boot/dts/kirkwood.dtsi
> +++ b/arch/arm/boot/dts/kirkwood.dtsi
> @@ -310,5 +310,14 @@
>  			#phy-cells = <0>;
>  			status = "ok";
>  		};
> +
> +		audio0: audio-controller at a0000 {
> +			compatible = "marvell,kirkwood-audio";
> +			reg = <0xa0000 0x2210>;
> +			interrupts = <24>;
> +			clocks = <&gate_clk 9>;
> +			clock-names = "internal";
> +			status = "disabled";
> +                };

leading whitespace before brace.

thx,

Jason.

>  	};
>  };
> -- 
> 1.8.5.3
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel