[PATCH v2 1/5] ARM: Kirkwood: Add audio node to kirkwood.dtsi

[Andrew Lunn]

The binding has existed for a while, so add the missing node so it can
be used by devices.

Signed-off-by: Andrew Lunn <andrew at lunn.ch>
---
v2:
Tabify
---
 arch/arm/boot/dts/kirkwood.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 7b921b30cfcb..180dc69ff742 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -310,5 +310,14 @@
 			#phy-cells = <0>;
 			status = "ok";
 		};
+
+		audio0: audio-controller at a0000 {
+			compatible = "marvell,kirkwood-audio";
+			reg = <0xa0000 0x2210>;
+			interrupts = <24>;
+			clocks = <&gate_clk 9>;
+			clock-names = "internal";
+			status = "disabled";
+                };
 	};
 };
-- 
1.8.5.3