[PATCH 3/4] ARM: DT: STi: Add DT node for MiPHY365x
Lee Jones
lee.jones at linaro.org
Wed Feb 12 11:03:04 EST 2014
The MiPHY365x is a Generic PHY which can serve various SATA or PCIe
devices. It has 2 ports which it can use for either; both SATA, both
PCIe or one of each in any configuration.
Cc: devicetree at vger.kernel.org
Cc: Srinivas Kandagatla <srinivas.kandagatla at st.com>
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
arch/arm/boot/dts/stih416-b2020-revE.dts | 6 +++++-
arch/arm/boot/dts/stih416-b2020.dts | 6 ++++++
arch/arm/boot/dts/stih416.dtsi | 13 +++++++++++++
3 files changed, 24 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020-revE.dts
index a874570..dbe67fa 100644
--- a/arch/arm/boot/dts/stih416-b2020-revE.dts
+++ b/arch/arm/boot/dts/stih416-b2020-revE.dts
@@ -32,6 +32,10 @@
ethernet1: ethernet at fef08000 {
snps,reset-gpio = <&PIO0 7>;
};
- };
+ miphy365x_phy: miphy365x at 0 {
+ st,pcie_tx_pol_inv = <1>;
+ st,sata_gen = "gen3";
+ };
+ };
};
diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts
index 276f28d..fd9cbad 100644
--- a/arch/arm/boot/dts/stih416-b2020.dts
+++ b/arch/arm/boot/dts/stih416-b2020.dts
@@ -13,4 +13,10 @@
model = "STiH416 B2020";
compatible = "st,stih416", "st,stih416-b2020";
+ soc {
+ miphy365x_phy: miphy365x at 0 {
+ st,pcie_tx_pol_inv = <1>;
+ st,sata_gen = "gen3";
+ };
+ };
};
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index 85b8063..9fd8efb 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -9,6 +9,8 @@
#include "stih41x.dtsi"
#include "stih416-clock.dtsi"
#include "stih416-pinctrl.dtsi"
+
+#include <dt-bindings/phy/phy-miphy365x.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset-controller/stih416-resets.h>
/ {
@@ -140,5 +142,16 @@
clocks = <&CLK_S_ICN_REG_0>;
};
+ miphy365x_phy: miphy365x at 0 {
+ compatible = "st,miphy365x-phy";
+ reg = <0xfe382000 0x100>,
+ <0xfe38a000 0x100>,
+ <0xfe394000 0x100>,
+ <0xfe804000 0x100>;
+ reg-names = "sata0", "sata1", "pcie0", "pcie1";
+
+ #phy-cells = <2>;
+ st,syscfg = <&syscfg_rear>;
+ };
};
};
--
1.8.3.2
More information about the linux-arm-kernel
mailing list