[PATCH 1/7] pinctrl: sh-pfc: r8a7790: Add QSPI pin groups
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Mon Feb 10 07:48:36 EST 2014
Hi Geert,
Thank you for the patch.
On Monday 10 February 2014 11:47:27 Geert Uytterhoeven wrote:
> From: Geert Uytterhoeven <geert+renesas at linux-m68k.org>
>
> A QSPI function set consists of 3 groups:
> - qspi_ctrl (2 control wires)
> - qspi_data2 (2 data wires, for Single/Dual SPI)
> - qspi_data4 (4 data wires, for Quad SPI)
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas at linux-m68k.org>
> Cc: Linus Walleij <linus.walleij at linaro.org>
> Cc: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> ---
> drivers/pinctrl/sh-pfc/pfc-r8a7790.c | 33 +++++++++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c index c381ae63c508..bc9ced3ccd58
> 100644
> --- a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> @@ -2389,6 +2389,29 @@ static const unsigned int msiof3_tx_pins[] = {
> static const unsigned int msiof3_tx_mux[] = {
> MSIOF3_TXD_MARK,
> };
> +/* - QSPI -------------------------------------------------------------- */
> +static const unsigned int qspi_ctrl_pins[] = {
> + /* SPCLK, SSL */
> + RCAR_GP_PIN(1, 4), RCAR_GP_PIN(1, 9),
> +};
> +static const unsigned int qspi_ctrl_mux[] = {
> + SPCLK_MARK, SSL_MARK,
> +};
> +static const unsigned int qspi_data2_pins[] = {
> + /* MOSI_IO0, MISO_IO1 */
> + RCAR_GP_PIN(1, 5), RCAR_GP_PIN(1, 6),
> +};
> +static const unsigned int qspi_data2_mux[] = {
> + MOSI_IO0_MARK, MISO_IO1_MARK,
> +};
> +static const unsigned int qspi_data4_pins[] = {
> + /* MOSI_IO0, MISO_IO1, IO2, IO3 */
> + RCAR_GP_PIN(1, 5), RCAR_GP_PIN(1, 6), RCAR_GP_PIN(1, 7),
> + RCAR_GP_PIN(1, 8),
> +};
> +static const unsigned int qspi_data4_mux[] = {
> + MOSI_IO0_MARK, MISO_IO1_MARK, IO2_MARK, IO3_MARK,
> +};
> /* - SCIF0 ------------------------------------------------------------- */
> static const unsigned int scif0_data_pins[] = {
> /* RX, TX */
> @@ -3671,6 +3694,9 @@ static const struct sh_pfc_pin_group pinmux_groups[] =
> { SH_PFC_PIN_GROUP(msiof3_ss2),
> SH_PFC_PIN_GROUP(msiof3_rx),
> SH_PFC_PIN_GROUP(msiof3_tx),
> + SH_PFC_PIN_GROUP(qspi_ctrl),
> + SH_PFC_PIN_GROUP(qspi_data2),
> + SH_PFC_PIN_GROUP(qspi_data4),
> SH_PFC_PIN_GROUP(scif0_data),
> SH_PFC_PIN_GROUP(scif0_clk),
> SH_PFC_PIN_GROUP(scif0_ctrl),
> @@ -3970,6 +3996,12 @@ static const char * const msiof3_groups[] = {
> "msiof3_tx",
> };
>
> +static const char * const qspi_groups[] = {
> + "qspi_ctrl",
> + "qspi_data2",
> + "qspi_data4",
> +};
> +
> static const char * const scif0_groups[] = {
> "scif0_data",
> "scif0_clk",
> @@ -4212,6 +4244,7 @@ static const struct sh_pfc_function pinmux_functions[]
> = { SH_PFC_FUNCTION(msiof0),
> SH_PFC_FUNCTION(msiof1),
> SH_PFC_FUNCTION(msiof2),
> + SH_PFC_FUNCTION(qspi),
> SH_PFC_FUNCTION(msiof3),
I believe qspi comes after msiof3 :-)
Apart from that the patch looks good.
Acked-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> SH_PFC_FUNCTION(scif0),
> SH_PFC_FUNCTION(scif1),
--
Regards,
Laurent Pinchart
More information about the linux-arm-kernel
mailing list