[PATCH] ARM: EDMA: Use platform_get_resource functions for DT

[Russell King - ARM Linux]

On Thu, Feb 20, 2014 at 10:24:21PM -0600, Joel Fernandes wrote:
> diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
> index dc95efc..ae0ccae 100644
> --- a/arch/arm/common/edma.c
> +++ b/arch/arm/common/edma.c
> @@ -1469,11 +1470,14 @@ static int edma_xbar_event_map(struct device *dev,
>  	if (!xbar_chans)
>  		return -ENOMEM;
>  
> -	ret = of_address_to_resource(node, 1, &res);
> -	if (ret)
> +	pdev = to_platform_device(dev);
> +	res = platform_get_resource_byname(pdev,
> +					   IORESOURCE_MEM,
> +					   "edma_xbar");
> +	if (!res)
>  		return -EIO;
>  
> -	xbar = devm_ioremap(dev, res.start, resource_size(&res));
> +	xbar = devm_ioremap(dev, res->start, resource_size(res));
>  	if (!xbar)
>  		return -ENOMEM;

Irrespective of what Mark said, this should be upgraded to use
devm_ioremap_resource() which does all the checking necessary (and
claims the resource.)  That can be done irrespective of this change.

-- 
FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up.  Estimation
in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad.
Estimate before purchase was "up to 13.2Mbit".