Re: [PATCH v4] bus: imx-weim: support CS GPR configuration

Alexander Shiyan shc_work at mail.ru
Sun Feb 16 09:22:44 EST 2014


Воскресенье, 16 февраля 2014, 22:03 +08:00 от Shawn Guo <shawn.guo at linaro.org>:
> For imx50-weim and imx6q-weim type of devices, there might a WEIM CS
> space configuration register in General Purpose Register controller,
> e.g. IOMUXC_GPR1 on i.MX6Q.
...
> +static int __init imx_weim_gpr_setup(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct property *prop;
> +	const __be32 *p;
> +	struct regmap *gpr;
> +	u32 gprvals[4] = {
> +		05,	/* CS0(128M) CS1(0M)  CS2(0M)  CS3(0M) */
> +		033,	/* CS0(64M)  CS1(64M) CS2(0M)  CS3(0M) */
> +		0113,	/* CS0(64M)  CS1(32M) CS2(32M) CS3(0M) */
> +		01111,	/* CS0(64M)  CS1(32M) CS2(32M) CS3(0M) */
> +	};
> +	u32 gprval = 0;
> +	u32 val;
> +	int cs = 0;
> +	int i = 0;
> +
> +	gpr = syscon_regmap_lookup_by_phandle(np, "fsl,weim-cs-gpr");
> +	if (IS_ERR(gpr)) {
> +		dev_dbg(&pdev->dev, "failed to find weim-cs-gpr\n");
> +		return 0;

Only one comment:
You do not use these error codes in the probe(),
so let's declare this function as void.

---


More information about the linux-arm-kernel mailing list