[PATCH v4] bus: imx-weim: support CS GPR configuration

[Shawn Guo]

On Sun, Feb 16, 2014 at 06:22:44PM +0400, Alexander Shiyan wrote:
> Воскресенье, 16 февраля 2014, 22:03 +08:00 от Shawn Guo <shawn.guo at linaro.org>:
> > For imx50-weim and imx6q-weim type of devices, there might a WEIM CS
> > space configuration register in General Purpose Register controller,
> > e.g. IOMUXC_GPR1 on i.MX6Q.
> ...
> > +static int __init imx_weim_gpr_setup(struct platform_device *pdev)
> > +{
> > +	struct device_node *np = pdev->dev.of_node;
> > +	struct property *prop;
> > +	const __be32 *p;
> > +	struct regmap *gpr;
> > +	u32 gprvals[4] = {
> > +		05,	/* CS0(128M) CS1(0M)  CS2(0M)  CS3(0M) */
> > +		033,	/* CS0(64M)  CS1(64M) CS2(0M)  CS3(0M) */
> > +		0113,	/* CS0(64M)  CS1(32M) CS2(32M) CS3(0M) */
> > +		01111,	/* CS0(64M)  CS1(32M) CS2(32M) CS3(0M) */
> > +	};
> > +	u32 gprval = 0;
> > +	u32 val;
> > +	int cs = 0;
> > +	int i = 0;
> > +
> > +	gpr = syscon_regmap_lookup_by_phandle(np, "fsl,weim-cs-gpr");
> > +	if (IS_ERR(gpr)) {
> > +		dev_dbg(&pdev->dev, "failed to find weim-cs-gpr\n");
> > +		return 0;
> 
> Only one comment:
> You do not use these error codes in the probe(),
> so let's declare this function as void.

Oh, yes.  I should check return of imx_weim_gpr_setup() in probe().
Will add in the next version.

Shawn