[PATCH] ARM: pxa: add gpio keys information

[Dmitry Eremin-Solenikov]

Switching from corgikbd to matrixkbd corgi has lost support for few switches.
Readd them through gpio-keys-polled device (-polled, since scoop does
not provide IRQ for GPIO).

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
---
 arch/arm/mach-pxa/corgi.c | 40 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index f162f1b..57d6054 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -32,6 +32,7 @@
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/mtd/sharpsl.h>
 #include <linux/input/matrix_keypad.h>
+#include <linux/gpio_keys.h>
 #include <linux/module.h>
 #include <video/w100fb.h>
 
@@ -405,6 +406,44 @@ static struct platform_device corgikbd_device = {
 	},
 };
 
+static struct gpio_keys_button corgi_gpio_keys[] = {
+	{
+		.type	= EV_SW,
+		.code	= SW_LID,
+		.gpio	= CORGI_GPIO_SWA,
+		.desc	= "Lid close switch",
+		.debounce_interval = 500,
+	},
+	{
+		.type	= EV_SW,
+		.code	= SW_TABLET_MODE,
+		.gpio	= CORGI_GPIO_SWB,
+		.desc	= "Tablet mode switch",
+		.debounce_interval = 500,
+	},
+	{
+		.type	= EV_SW,
+		.code	= SW_HEADPHONE_INSERT,
+		.gpio	= CORGI_GPIO_AK_INT,
+		.desc	= "HeadPhone insert",
+		.debounce_interval = 500,
+	},
+};
+
+static struct gpio_keys_platform_data corgi_gpio_keys_platform_data = {
+	.buttons	= corgi_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(corgi_gpio_keys),
+	.poll_interval	= 250,
+};
+
+static struct platform_device corgi_gpio_keys_device = {
+	.name	= "gpio-keys-polled",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &corgi_gpio_keys_platform_data,
+	},
+};
+
 /*
  * Corgi LEDs
  */
@@ -646,6 +685,7 @@ static struct platform_device sharpsl_rom_device = {
 static struct platform_device *devices[] __initdata = {
 	&corgiscoop_device,
 	&corgifb_device,
+	&corgi_gpio_keys_device,
 	&corgikbd_device,
 	&corgiled_device,
 	&corgi_audio_device,
-- 
1.8.5.3