[PATCH] arm: dts: Add support for Compulab sbc-t3530 with cm-t35
Igor Grinberg
grinberg at compulab.co.il
Sun Feb 23 07:33:53 EST 2014
Hi Stefan,
Have you seen the series sent by Dmitry on 12-Jan-2014?
It is called "ARM: dts: sbc-t3x: add support for more boards",
or you can check it out here:
http://www.spinics.net/lists/arm-kernel/msg300078.html
On 02/21/14 14:36, Stefan Roese wrote:
> The cm-t3530 SOM is equipped with the OMAP3530 and does not boot with
> the cm-t3730 dts file as it used the omap36xx.dtsi. Add a separate
> dts/dtsi for this board to support it correctly.
>
> I moved some common parts into omap3-cm-t3x30.dtsi. And removed
> the SDIO/WLAN support for now. As I don't know exactly how this
> should be done. Perhaps somebody else might jump in here...
>
> Signed-off-by: Stefan Roese <sr at denx.de>
> Cc: Igor Grinberg <grinberg at compulab.co.il>
> Cc: Dmitry Lifshitz <lifshitz at compulab.co.il>
> Cc: Tony Lindgren <tony at atomide.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/omap3-cm-t3530.dts | 29 +++++++++++++++++++
> arch/arm/boot/dts/omap3-cm-t3730.dts | 54 ++++-------------------------------
> arch/arm/boot/dts/omap3-cm-t3x30.dtsi | 44 ++++++++++++++++++++++++++++
> arch/arm/boot/dts/omap3-sbc-t3530.dts | 30 +++++++++++++++++++
> 5 files changed, 110 insertions(+), 48 deletions(-)
> create mode 100644 arch/arm/boot/dts/omap3-cm-t3530.dts
> create mode 100644 arch/arm/boot/dts/omap3-sbc-t3530.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 6d1e43d..6fd1b34 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -200,6 +200,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
> omap3430-sdp.dtb \
> omap3-beagle.dtb \
> omap3-cm-t3730.dtb \
> + omap3-sbc-t3530.dtb \
> omap3-sbc-t3730.dtb \
> omap3-devkit8000.dtb \
> omap3-beagle-xm.dtb \
> diff --git a/arch/arm/boot/dts/omap3-cm-t3530.dts b/arch/arm/boot/dts/omap3-cm-t3530.dts
> new file mode 100644
> index 0000000..35a1fc2
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap3-cm-t3530.dts
> @@ -0,0 +1,29 @@
> +/*
> + * Support for CompuLab CM-T3530
> + */
> +/dts-v1/;
> +
> +#include "omap34xx-hs.dtsi"
> +#include "omap3-cm-t3x30.dtsi"
> +
> +/ {
> + model = "CompuLab CM-T3530";
> + compatible = "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
> +};
> +
> +&mmc1 {
> + vmmc-supply = <&vmmc1>;
> + bus-width = <4>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc1_pins>;
> +};
> +
> +&smsc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&smsc1_pins>;
> +};
> +
> +&uart3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart3_pins>;
> +};
> diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
> index 486f4d6..3e05b11 100644
> --- a/arch/arm/boot/dts/omap3-cm-t3730.dts
> +++ b/arch/arm/boot/dts/omap3-cm-t3730.dts
> @@ -32,39 +32,14 @@
> };
>
> &omap3_pmx_core {
> - mmc1_pins: pinmux_mmc1_pins {
> - pinctrl-single,pins = <
> - 0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
> - 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
> - 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
> - 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
> - 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
> - 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
> - >;
> - };
> -
> mmc2_pins: pinmux_mmc2_pins {
> pinctrl-single,pins = <
> - 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
> - 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
> - 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
> - 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
> - 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
> - 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
> - >;
> - };
> -
> - smsc1_pins: pinmux_smsc1_pins {
> - pinctrl-single,pins = <
> - 0x88 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs5.gpmc_ncs5 */
> - 0x16a (PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 */
> - >;
> - };
> -
> - uart3_pins: pinmux_uart3_pins {
> - pinctrl-single,pins = <
> - 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
> - 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
> + 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
> + 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
> + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
> + 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
> + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
> + 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
> >;
> };
>
> @@ -76,13 +51,6 @@
> };
> };
>
> -&mmc1 {
> - vmmc-supply = <&vmmc1>;
> - bus-width = <4>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&mmc1_pins>;
> -};
> -
> &mmc2 {
> pinctrl-names = "default";
> pinctrl-0 = <&mmc2_pins>;
> @@ -92,13 +60,3 @@
> bus-width = <4>;
> cap-power-off-card;
> };
> -
> -&smsc1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&smsc1_pins>;
> -};
> -
> -&uart3 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&uart3_pins>;
> -};
> diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
> index 3a9f004..0eadd4a 100644
> --- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
> +++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
> @@ -36,6 +36,33 @@
> };
> };
>
> +&omap3_pmx_core {
> + mmc1_pins: pinmux_mmc1_pins {
> + pinctrl-single,pins = <
> + 0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
> + 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
> + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
> + 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
> + 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
> + 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
> + >;
> + };
> +
> + smsc1_pins: pinmux_smsc1_pins {
> + pinctrl-single,pins = <
> + 0x88 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs5.gpmc_ncs5 */
> + 0x16a (PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 */
> + >;
> + };
> +
> + uart3_pins: pinmux_uart3_pins {
> + pinctrl-single,pins = <
> + 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
> + 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
> + >;
> + };
> +};
> +
> &gpmc {
> ranges = <5 0 0x2c000000 0x01000000>;
>
> @@ -83,6 +110,23 @@
> };
> };
>
> +&mmc1 {
> + vmmc-supply = <&vmmc1>;
> + bus-width = <4>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc1_pins>;
> +};
> +
> +&smsc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&smsc1_pins>;
> +};
> +
> +&uart3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart3_pins>;
> +};
> +
> #include "twl4030.dtsi"
> #include "twl4030_omap3.dtsi"
>
> diff --git a/arch/arm/boot/dts/omap3-sbc-t3530.dts b/arch/arm/boot/dts/omap3-sbc-t3530.dts
> new file mode 100644
> index 0000000..b548343
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap3-sbc-t3530.dts
> @@ -0,0 +1,30 @@
> +/*
> + * Support for CompuLab SBC-T3530 with CM-T3530
> + */
> +
> +#include "omap3-cm-t3530.dts"
> +#include "omap3-sb-t35.dtsi"
> +
> +/ {
> + model = "CompuLab SBC-T3530 with CM-T3530";
> + compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
> +};
> +
> +&gpmc {
> + ranges = <5 0 0x2c000000 0x01000000>,
> + <4 0 0x2d000000 0x01000000>;
> +};
> +
> +&smsc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&smsc2_pins>;
> +};
> +
> +&omap3_pmx_core {
> + smsc2_pins: pinmux_smsc2_pins {
> + pinctrl-single,pins = <
> + 0x86 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs4.gpmc_ncs4 */
> + 0xa2 (PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_wait3.gpio_65 */
> + >;
> + };
> +};
>
--
Regards,
Igor.
More information about the linux-arm-kernel
mailing list