[PATCH v6 5/8] ARM: dts: sun7i: Add support for mmc
David Lanzendörfer
david.lanzendoerfer at o2s.ch
Sun Feb 16 00:11:46 EST 2014
Signed-off-by: David Lanzendörfer <david.lanzendoerfer at o2s.ch>
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 8 +++
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 8 +++
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 23 +++++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 61 +++++++++++++++++++++++
4 files changed, 100 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 5c51cb8..ae800b6 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -34,6 +34,14 @@
};
};
+ mmc0: mmc at 01c0f000 {
+ pinctrl-names = "default", "default";
+ pinctrl-0 = <&mmc0_pins_a>;
+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ status = "okay";
+ };
+
pinctrl at 01c20800 {
led_pins_cubieboard2: led_pins at 0 {
allwinner,pins = "PH20", "PH21";
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index f9dcb61..370cef84 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -19,6 +19,14 @@
compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
soc at 01c00000 {
+ mmc0: mmc at 01c0f000 {
+ pinctrl-names = "default", "default";
+ pinctrl-0 = <&mmc0_pins_a>;
+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ status = "okay";
+ };
+
pinctrl at 01c20800 {
led_pins_cubietruck: led_pins at 0 {
allwinner,pins = "PH7", "PH11", "PH20", "PH21";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index ead3013..685ec06 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -34,7 +34,30 @@
};
};
+ mmc0: mmc at 01c0f000 {
+ pinctrl-names = "default", "default";
+ pinctrl-0 = <&mmc0_pins_a>;
+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ status = "okay";
+ };
+
+ mmc3: mmc at 01c12000 {
+ pinctrl-names = "default", "default";
+ pinctrl-0 = <&mmc3_pins_a>;
+ pinctrl-1 = <&mmc3_cd_pin_olinuxinom>;
+ cd-gpios = <&pio 7 11 0>; /* PH11 */
+ status = "okay";
+ };
+
pinctrl at 01c20800 {
+ mmc3_cd_pin_olinuxinom: mmc3_cd_pin at 0 {
+ allwinner,pins = "PH11";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
led_pins_olinuxino: led_pins at 0 {
allwinner,pins = "PH2";
allwinner,function = "gpio_out";
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 9ff0948..5b55414 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -355,6 +355,46 @@
#size-cells = <0>;
};
+ mmc0: mmc at 01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <0 32 4>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ mmc1: mmc at 01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ahb_gates 9>, <&mmc1_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <0 33 4>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ mmc2: mmc at 01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <0 34 4>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ mmc3: mmc at 01c12000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c12000 0x1000>;
+ clocks = <&ahb_gates 11>, <&mmc3_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <0 35 4>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
pio: pinctrl at 01c20800 {
compatible = "allwinner,sun7i-a20-pinctrl";
reg = <0x01c20800 0x400>;
@@ -432,6 +472,27 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ mmc0_pins_a: mmc0 at 0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <3>;
+ allwinner,pull = <0>;
+ };
+
+ mmc0_cd_pin_reference_design: mmc0_cd_pin at 0 {
+ allwinner,pins = "PH1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
+ mmc3_pins_a: mmc3 at 0 {
+ allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
+ allwinner,function = "mmc3";
+ allwinner,drive = <3>;
+ allwinner,pull = <0>;
+ };
};
timer at 01c20c00 {
More information about the linux-arm-kernel
mailing list