[PATCH 1/1] ARM: dts: omap3-igep: fix boot fail due wrong compatible match

[Javier Martinez Canillas]

Hi Tony,

On Fri, Feb 28, 2014 at 3:57 PM, Tony Lindgren <tony at atomide.com> wrote:
> * Javier Martinez Canillas <javier at dowhile0.org> [140228 10:52]:
>> Hi Tony,
>>
>> On Sat, Feb 22, 2014 at 10:59 AM, Javier Martinez Canillas
>> <javier.martinez at collabora.co.uk> wrote:
>> > This patch is based on commit:
>> >
>> > 016c12d2 ("ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree")
>> >
>> > and fixes a boot hang due the IGEP board being wrongly initialized
>> > as an OMAP3430 platform instead of an OMAP3630.
>> >
>> > Signed-off-by: Javier Martinez Canillas <javier.martinez at collabora.co.uk>
>> > ---
>> >
>> > Tony and Benoit,
>> >
>> > Sorry for posting this patch this late on the -rc cycle but I just didn't
>> > have time before to test IGEP boards against 3.14.
>> >
>> > I hope this fix can still make it to 3.14 since is a very big issue
>> > (board not even booting).
>> >
>> > Thanks a lot and best regards,
>> > Javier
>> >
>> >  arch/arm/boot/dts/omap3-igep0020.dts | 2 +-
>> >  arch/arm/boot/dts/omap3-igep0030.dts | 2 +-
>> >  2 files changed, 2 insertions(+), 2 deletions(-)
>> >
>> > diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
>> > index 25a2b5f..f2779ac 100644
>> > --- a/arch/arm/boot/dts/omap3-igep0020.dts
>> > +++ b/arch/arm/boot/dts/omap3-igep0020.dts
>> > @@ -14,7 +14,7 @@
>> >
>> >  / {
>> >         model = "IGEPv2 (TI OMAP AM/DM37x)";
>> > -       compatible = "isee,omap3-igep0020", "ti,omap3";
>> > +       compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
>> >
>> >         leds {
>> >                 pinctrl-names = "default";
>> > diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
>> > index 145c58c..2793749 100644
>> > --- a/arch/arm/boot/dts/omap3-igep0030.dts
>> > +++ b/arch/arm/boot/dts/omap3-igep0030.dts
>> > @@ -13,7 +13,7 @@
>> >
>> >  / {
>> >         model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
>> > -       compatible = "isee,omap3-igep0030", "ti,omap3";
>> > +       compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";
>> >
>> >         leds {
>> >                 pinctrl-names = "default";
>> > --
>> > 1.8.5.3
>> >
>>
>> I saw you send a pull request for 3.14-rc4 fixes and this fix was not included.
>>
>> Are you planning to send more fixes for 3.14?
>
> Yes hoping to send one more set, got this one tagged for it.
>

Great, thanks a lot for your help!

Best regards,
Javier