[PATCH 03/11] ARM: shmobile: koelsch: Add I2C support
Simon Horman
horms+renesas at verge.net.au
Thu Feb 13 03:03:50 EST 2014
From: Valentine Barshak <valentine.barshak at cogentembedded.com>
This adds I2C[1245] busses support to Koelsch board.
I2C[03] do not have any slave devices connected and
are not used because of the following:
* I2C0 pins are multiplexed with LBSC pins;
* I2C3 pins are multiplexed with EtherMAC and VIN0 pins.
Signed-off-by: Valentine Barshak <valentine.barshak at cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm/mach-shmobile/board-koelsch.c | 46 ++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c
index 1ec3b91..2741dba 100644
--- a/arch/arm/mach-shmobile/board-koelsch.c
+++ b/arch/arm/mach-shmobile/board-koelsch.c
@@ -165,6 +165,38 @@ static const struct platform_device_info sata0_info __initconst = {
.dma_mask = DMA_BIT_MASK(32),
};
+/* I2C */
+static const struct resource i2c_resources[] __initconst = {
+ /* I2C0 */
+ DEFINE_RES_MEM(0xE6508000, 0x40),
+ DEFINE_RES_IRQ(gic_spi(287)),
+ /* I2C1 */
+ DEFINE_RES_MEM(0xE6518000, 0x40),
+ DEFINE_RES_IRQ(gic_spi(288)),
+ /* I2C2 */
+ DEFINE_RES_MEM(0xE6530000, 0x40),
+ DEFINE_RES_IRQ(gic_spi(286)),
+ /* I2C3 */
+ DEFINE_RES_MEM(0xE6540000, 0x40),
+ DEFINE_RES_IRQ(gic_spi(290)),
+ /* I2C4 */
+ DEFINE_RES_MEM(0xE6520000, 0x40),
+ DEFINE_RES_IRQ(gic_spi(19)),
+ /* I2C5 */
+ DEFINE_RES_MEM(0xE6528000, 0x40),
+ DEFINE_RES_IRQ(gic_spi(20)),
+};
+
+static void __init koelsch_add_i2c(unsigned idx)
+{
+ unsigned res_idx = idx * 2;
+
+ BUG_ON(res_idx >= ARRAY_SIZE(i2c_resources));
+
+ platform_device_register_simple("i2c-rcar_gen2", idx,
+ i2c_resources + res_idx, 2);
+}
+
static const struct pinctrl_map koelsch_pinctrl_map[] = {
/* DU */
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
@@ -188,6 +220,15 @@ static const struct pinctrl_map koelsch_pinctrl_map[] = {
/* SCIF1 (CN20: DEBUG SERIAL1) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7791",
"scif1_data_d", "scif1"),
+ /* I2C1 */
+ PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.1", "pfc-r8a7791",
+ "i2c1_e", "i2c1"),
+ /* I2C2 */
+ PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.2", "pfc-r8a7791",
+ "i2c2", "i2c2"),
+ /* I2C4 */
+ PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.4", "pfc-r8a7791",
+ "i2c4_c", "i2c4"),
};
static void __init koelsch_add_standard_devices(void)
@@ -211,6 +252,11 @@ static void __init koelsch_add_standard_devices(void)
koelsch_add_du_device();
platform_device_register_full(&sata0_info);
+
+ koelsch_add_i2c(1);
+ koelsch_add_i2c(2);
+ koelsch_add_i2c(4);
+ koelsch_add_i2c(5);
}
/*
--
1.8.5.2
More information about the linux-arm-kernel
mailing list