[PATCH v3 04/20] ARM: shmobile: r8a7779: Add clocks

Laurent Pinchart laurent.pinchart at ideasonboard.com
Wed Feb 26 09:45:03 EST 2014


Hi Simon,

One more comment.

On Wednesday 26 February 2014 16:33:20 Simon Horman wrote:
> Declare all core and MSTP clocks currently used by r8a7779-based boards.
> 
> Based on work by Laurent Pinchart for the r8a7790 and r8a7791 SoCs.
> 
> Cc: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
> 
> ---
> v3
> * As suggested by Laurent Pinchart
>   - Add and use extal_clk
>   - Fix bogus status register use for MSTP clocks
>   - Fix bogus mstp3_cls to use its own entries rather than
>     that of mstp1_clks
> 
> * Update to use "main" in cpg_clocks as per updated
>   binding in previous patch
> * Update for new, consolidated and renamed index macros
>   - R8A7779_CLK_ETHER
>   - R8A7779_CLK_HSCIF
>   - R8A7779_CLK_HSPI
>   - R8A7779_CLK_MMC0,1
>   - R8A7779_CLK_PCIE
>   - R8A7779_CLK_USB01,2
> ---
>  arch/arm/boot/dts/r8a7779.dtsi | 129 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 129 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
> index d0561d4..240a03e 100644
> --- a/arch/arm/boot/dts/r8a7779.dtsi
> +++ b/arch/arm/boot/dts/r8a7779.dtsi
> @@ -11,6 +11,7 @@
> 
>  /include/ "skeleton.dtsi"
> 
> +#include <dt-bindings/clock/r8a7779-clock.h>
>  #include <dt-bindings/interrupt-controller/irq.h>
> 
>  / {
> @@ -278,4 +279,132 @@
>  		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
>  		status = "disabled";
>  	};
> +
> +	clocks {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		/* External root clock */
> +		extal_clk: extal_clk {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			/* This value must be overriden by the board. */
> +			clock-frequency = <0>;
> +			clock-output-names = "extal";
> +		};
> +
> +		/* Special CPG clocks */
> +		cpg_clocks: cpg_clocks at 0xe6150000 {
> +			compatible = "renesas,r8a7779-cpg-clocks";
> +			reg = <0 0xe6150000 0 0x1000>;

Copied from H2 ? :-) This should probably be

	reg = <0 0xffc80000 0 0x30>;

> +			clocks = <&extal_clk>;
> +			#clock-cells = <1>;
> +			clock-output-names = "plla", "z", "zs", "s",
> +					     "s1", "p", "out";
> +		};
> +
> +		/* Fixed factor clocks */
> +		i_clk: i_clk {
> +			compatible = "fixed-factor-clock";
> +			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
> +			#clock-cells = <0>;
> +			clock-div = <2>;
> +			clock-mult = <1>;
> +			clock-output-names = "i";
> +		};
> +		s3_clk: s3_clk {
> +			compatible = "fixed-factor-clock";
> +			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
> +			#clock-cells = <0>;
> +			clock-div = <8>;
> +			clock-mult = <1>;
> +			clock-output-names = "s3";
> +		};
> +		s4_clk: s4_clk {
> +			compatible = "fixed-factor-clock";
> +			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
> +			#clock-cells = <0>;
> +			clock-div = <16>;
> +			clock-mult = <1>;
> +			clock-output-names = "s4";
> +		};
> +		g_clk: g_clk {
> +			compatible = "fixed-factor-clock";
> +			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
> +			#clock-cells = <0>;
> +			clock-div = <24>;
> +			clock-mult = <1>;
> +			clock-output-names = "g";
> +		};
> +
> +		/* Gate clocks */
> +		mstp0_clks: mstp0_clks {
> +			compatible = "renesas,r8a7779-mstp-clocks", "renesas,cpg-mstp-
clocks";
> +			reg = <0 0xffc80030 0 4>;
> +			clocks = <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks 
R8A7779_CLK_P>,
> <&cpg_clocks R8A7779_CLK_P>, +				 <&cpg_clocks R8A7779_CLK_P>,
> <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, +				
> <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks
> R8A7779_CLK_P>, +				 <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks
> R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, +				 <&cpg_clocks
> R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>,
> +				 <&cpg_clocks R8A7779_CLK_P>;
> +			#clock-cells = <1>;
> +			renesas,clock-indices = <
> +				R8A7779_CLK_HSPI R8A7779_CLK_TMU0 R8A7779_CLK_TMU0
> +				R8A7779_CLK_TMU0 R8A7779_CLK_SCIF5 R8A7779_CLK_SCIF4
> +				R8A7779_CLK_SCIF3 R8A7779_CLK_SCIF2 R8A7779_CLK_SCIF1
> +				R8A7779_CLK_SCIF0 R8A7779_CLK_I2C3 R8A7779_CLK_I2C2
> +				R8A7779_CLK_I2C1 R8A7779_CLK_I2C0
> +			>;
> +			clock-output-names =
> +				"hspi", "tmu00", "tmu01",
> +				"tmu02", "scif5", "scif4",
> +				"scif3", "scif2", "scif1",
> +				"scif0", "i2c3", "i2c2",
> +				"i2c1", "i2c0";
> +		};
> +		mstp1_clks: mstp1_clks {
> +			compatible = "renesas,r8a7779-mstp-clocks", "renesas,cpg-mstp-
clocks";
> +			reg = <0 0xffc80034 0 4>, <0 0xffc80044 0 4>;
> +			clocks = <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks 
R8A7779_CLK_P>,
> +				 <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>,
> +				 <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>,
> +				 <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>,
> +				 <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>,
> +				 <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>;
> +			#clock-cells = <1>;
> +			renesas,clock-indices = <
> +				R8A7779_CLK_USB01 R8A7779_CLK_USB01
> +				R8A7779_CLK_USB2 R8A7779_CLK_USB2
> +				R8A7779_CLK_DU R8A7779_CLK_VIN2
> +				R8A7779_CLK_VIN1 R8A7779_CLK_VIN0
> +				R8A7779_CLK_ETHER R8A7779_CLK_SATA
> +				R8A7779_CLK_PCIE R8A7779_CLK_VIN3
> +			>;
> +			clock-output-names =
> +				"ehci0", "ohci0",
> +				"ehci1", "ohci1",
> +				"du", "vin2",
> +				"vin1", "vin0",
> +				"ether", "sata",
> +				"pcie", "vin3";
> +		};
> +		mstp3_clks: mstp3_clks {
> +			compatible = "renesas,r8a7779-mstp-clocks", "renesas,cpg-mstp-
clocks";
> +			reg = <0 0xffc8003c 0 4>;
> +			clocks = <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks 
R8A7779_CLK_P>,
> +				 <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>,
> +				 <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>;
> +			#clock-cells = <1>;
> +			renesas,clock-indices = <
> +				R8A7779_CLK_SDHI3 R8A7779_CLK_SDHI2
> +				R8A7779_CLK_SDHI1 R8A7779_CLK_SDHI0
> +				R8A7779_CLK_MMC1 R8A7779_CLK_MMC0
> +			>;
> +			clock-output-names =
> +				"sdhi3", "sdhi2",
> +				"sdhi1", "sdhi0",
> +				"mmc1", "mmc0";
> +		};
> +	};
>  };

-- 
Regards,

Laurent Pinchart




More information about the linux-arm-kernel mailing list