[PATCH v3 06/15] at91: dt: at91sam9261ek: Adds DT entries for the 4 user buttons
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Fri Feb 7 03:27:52 EST 2014
On 16:57 Thu 23 Jan , Jean-Jacques Hiblot wrote:
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot at traphandler.com>
> ---
> arch/arm/boot/dts/at91sam9261ek.dts | 39 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 39 insertions(+)
do only one patch for the 9261ek support no nned to clean
>
> diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
> index 8909217..5555e9f5 100644
> --- a/arch/arm/boot/dts/at91sam9261ek.dts
> +++ b/arch/arm/boot/dts/at91sam9261ek.dts
> @@ -83,6 +83,15 @@
> AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
> };
> };
> +
> + keys {
> + pinctrl_keys: keys-0 {
> + atmel,pins = <AT91_PIOA 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
> + AT91_PIOA 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
> + AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
> + AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
> + };
> + };
no need this you can drop it
you just describe a gpio which we do not describe in pinctrl
> };
>
> watchdog at fffffd40 {
> @@ -109,4 +118,34 @@
> linux,default-trigger = "heartbeat";
> };
> };
> +
> + gpio_keys {
> + compatible = "gpio-keys";
> + pinctrl-0 = <&pinctrl_keys>;
> +
> + button_0 {
> + label = "button_0";
> + gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
> + linux,code = <256>;
> + gpio-key,wakeup;
> + };
> + button_1 {
> + label = "button_1";
> + gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
> + linux,code = <257>;
> + gpio-key,wakeup;
> + };
> + button_2 {
> + label = "button_2";
> + gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
> + linux,code = <258>;
> + gpio-key,wakeup;
> + };
> + button_3 {
> + label = "button_3";
> + gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
> + linux,code = <259>;
> + gpio-key,wakeup;
> + };
> + };
> };
> --
> 1.8.5.2
>
More information about the linux-arm-kernel
mailing list