[PATCH 0/4] mvebu support for kirkwood HP T5325

[Andrew Lunn]

This patchset adds support to mvebu for the HP T5325 thin client.
This is the first kirkwood device using device tree which supports
audio. However the audio codec is missing a device tree binding, and
simple-audio-card does not yet quite support all the properties needed
for this hardware. So C code is used for the audio devices.

Andrew Lunn (4):
  ARM: Kirkwood: Add audio node to kirkwood.dtsi
  ARM: mvebu: Add i2c alias so setting bus number
  ARM: mvebu: Add HP T5325 thin client
  ARM: mvebu: Add HP T5325 devices to {multi|mvebu}_v5_defconfig

 arch/arm/boot/dts/Makefile           |   1 +
 arch/arm/boot/dts/kirkwood-t5325.dts | 209 +++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/kirkwood.dtsi      |  12 +-
 arch/arm/configs/multi_v5_defconfig  |   9 ++
 arch/arm/configs/mvebu_v5_defconfig  |   9 ++
 arch/arm/mach-mvebu/Kconfig          |   7 ++
 arch/arm/mach-mvebu/Makefile         |   1 +
 arch/arm/mach-mvebu/board-t5325.c    |  41 +++++++
 arch/arm/mach-mvebu/board.h          |  22 ++++
 arch/arm/mach-mvebu/kirkwood.c       |  11 +-
 10 files changed, 320 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/boot/dts/kirkwood-t5325.dts
 create mode 100644 arch/arm/mach-mvebu/board-t5325.c
 create mode 100644 arch/arm/mach-mvebu/board.h

-- 
1.8.5.3