[PATCH v2 04/10] ARM: mvebu: add Device Tree description of the Armada 375 SoC
Thomas Petazzoni
thomas.petazzoni at free-electrons.com
Wed Feb 12 05:23:33 EST 2014
From: Gregory CLEMENT <gregory.clement at free-electrons.com>
The Armada 375 SoC is a new SoC from Marvell, based on a dual core
Cortex-A9 and a number of hardware blocks that are common with earlier
SoCs from the mvebu family.
The provided Device Tree describes the following parts of the SoC:
* CPUs
* Device Bus
* Clocks
* Interrupt controllers: GIC and MPIC
* GPIO controllers
* I2C buses
* L2 cache
* MBus controller
* SDIO
* Pinctrl
* SATA
* Serial
* SPI buses
* System controller (for reboot)
* Timer
* XOR engines
* PCIe controllers
Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
arch/arm/boot/dts/armada-375.dtsi | 439 ++++++++++++++++++++++++++++++++++++++
1 file changed, 439 insertions(+)
create mode 100644 arch/arm/boot/dts/armada-375.dtsi
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
new file mode 100644
index 0000000..31de4bf
--- /dev/null
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -0,0 +1,439 @@
+/*
+ * Device Tree Include file for Marvell Armada 375 family SoC
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement at free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+ model = "Marvell Armada 375 family SoC";
+ compatible = "marvell,armada375";
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ };
+
+ clocks {
+ /* 2 GHz fixed main PLL */
+ mainpll: mainpll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <2000000000>;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+ cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ soc {
+ compatible = "marvell,armada375-mbus", "marvell,armada370-mbus", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ controller = <&mbusc>;
+ interrupt-parent = <&gic>;
+ pcie-mem-aperture = <0xe0000000 0x8000000>;
+ pcie-io-aperture = <0xe8000000 0x100000>;
+
+ bootrom {
+ compatible = "marvell,bootrom";
+ reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+ };
+
+ devbus-bootcs {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs0 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs1 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs2 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs3 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ internal-regs {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+ L2: cache-controller at 8000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x8000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ timer at c600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xc600 0x20>;
+ interrupts = <1 13 0x301>;
+ clocks = <&coreclk 2>;
+ };
+
+ gic: interrupt-controller at d000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #size-cells = <0>;
+ interrupt-controller;
+ reg = <0xd000 0x1000>,
+ <0xc100 0x100>;
+ };
+
+ spi0: spi at 10600 {
+ compatible = "marvell,orion-spi";
+ reg = <0x10600 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ interrupts = <0 1 0x4>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ spi1: spi at 10680 {
+ compatible = "marvell,orion-spi";
+ reg = <0x10680 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ interrupts = <0 63 0x4>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c at 11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 2 0x4>;
+ timeout-ms = <1000>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c at 11100 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11100 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 3 0x4>;
+ timeout-ms = <1000>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ serial at 12000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x12000 0x100>;
+ reg-shift = <2>;
+ interrupts = <0 12 4>;
+ reg-io-width = <1>;
+ status = "disabled";
+ };
+
+ serial at 12100 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x12100 0x100>;
+ reg-shift = <2>;
+ interrupts = <0 13 4>;
+ reg-io-width = <1>;
+ status = "disabled";
+ };
+
+ pinctrl {
+ compatible = "marvell,mv88f6720-pinctrl";
+ reg = <0x18000 0x24>;
+
+ i2c0_pins: i2c0-pins {
+ marvell,pins = "mpp14", "mpp15";
+ marvell,function = "i2c0";
+ };
+
+ i2c1_pins: i2c1-pins {
+ marvell,pins = "mpp61", "mpp62";
+ marvell,function = "i2c1";
+ };
+
+ sdio_pins: sdio-pins {
+ marvell,pins = "mpp24", "mpp25", "mpp26",
+ "mpp27", "mpp28", "mpp29";
+ marvell,function = "sd";
+ };
+
+ spi0_pins: spi0-pins {
+ marvell,pins = "mpp0", "mpp1", "mpp4",
+ "mpp5", "mpp8", "mpp9";
+ marvell,function = "spi0";
+ };
+ };
+
+ gpio0: gpio at 18100 {
+ compatible = "marvell,orion-gpio";
+ reg = <0x18100 0x40>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 53 0x4>, <0 54 0x4>,
+ <0 55 0x4>, <0 56 0x4>;
+ };
+
+ gpio1: gpio at 18140 {
+ compatible = "marvell,orion-gpio";
+ reg = <0x18140 0x40>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 58 0x4>, <0 59 0x4>,
+ <0 60 0x4>, <0 61 0x4>;
+ };
+
+ gpio2: gpio at 18180 {
+ compatible = "marvell,orion-gpio";
+ reg = <0x18180 0x40>;
+ ngpios = <3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 62 0x4>;
+ };
+
+ system-controller at 18200 {
+ compatible = "marvell,armada-375-system-controller";
+ reg = <0x18200 0x100>;
+ };
+
+ gateclk: clock-gating-control at 18220 {
+ compatible = "marvell,armada-375-gating-clock";
+ reg = <0x18220 0x4>;
+ clocks = <&coreclk 0>;
+ #clock-cells = <1>;
+ };
+
+ mbusc: mbus-controller at 20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x100>, <0x20180 0x20>;
+ };
+
+ mpic: interrupt-controller at 20000 {
+ compatible = "marvell,mpic";
+ reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+ #interrupt-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ msi-controller;
+ interrupts = <1 15 0x4>;
+ };
+
+ timer at 20300 {
+ compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
+ reg = <0x20300 0x30>, <0x21040 0x30>;
+ interrupts-extended = <&gic 0 8 4>,
+ <&gic 0 9 4>,
+ <&gic 0 10 4>,
+ <&gic 0 11 4>,
+ <&mpic 5>,
+ <&mpic 6>;
+ clocks = <&coreclk 0>;
+ };
+
+ xor at 60800 {
+ compatible = "marvell,orion-xor";
+ reg = <0x60800 0x100
+ 0x60A00 0x100>;
+ clocks = <&gateclk 22>;
+ status = "okay";
+
+ xor00 {
+ interrupts = <0 22 0x4>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ xor01 {
+ interrupts = <0 23 0x4>;
+ dmacap,memcpy;
+ dmacap,xor;
+ dmacap,memset;
+ };
+ };
+
+ xor at 60900 {
+ compatible = "marvell,orion-xor";
+ reg = <0x60900 0x100
+ 0x60b00 0x100>;
+ clocks = <&gateclk 23>;
+ status = "okay";
+
+ xor10 {
+ interrupts = <0 65 0x4>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ xor11 {
+ interrupts = <0 66 0x4>;
+ dmacap,memcpy;
+ dmacap,xor;
+ dmacap,memset;
+ };
+ };
+
+ sata at a0000 {
+ compatible = "marvell,orion-sata";
+ reg = <0xa0000 0x5000>;
+ interrupts = <0 26 0x4>;
+ clocks = <&gateclk 14>, <&gateclk 20>;
+ clock-names = "0", "1";
+ status = "disabled";
+ };
+
+ mvsdio at d4000 {
+ compatible = "marvell,orion-sdio";
+ reg = <0xd4000 0x200>;
+ interrupts = <0 25 0x4>;
+ clocks = <&gateclk 17>;
+ bus-width = <4>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ status = "disabled";
+ };
+
+ coreclk: mvebu-sar at e8204 {
+ compatible = "marvell,armada-375-core-clock";
+ reg = <0xe8204 0x04>;
+ #clock-cells = <1>;
+ };
+
+ coredivclk: corediv-clock at e8250 {
+ compatible = "marvell,armada-375-corediv-clock";
+ reg = <0xe8250 0xc>;
+ #clock-cells = <1>;
+ clocks = <&mainpll>;
+ clock-output-names = "nand";
+ };
+ };
+
+ pcie-controller {
+ compatible = "marvell,armada-370-pcie";
+ status = "disabled";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ msi-parent = <&mpic>;
+ bus-range = <0x00 0xff>;
+
+ ranges =
+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0 MEM */
+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0 IO */
+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
+ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO */>;
+
+ pcie at 1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic 0 29 0x4>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 5>;
+ status = "disabled";
+ };
+
+ pcie at 2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic 0 33 0x4>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <1>;
+ clocks = <&gateclk 6>;
+ status = "disabled";
+ };
+
+ };
+ };
+};
--
1.8.3.2
More information about the linux-arm-kernel
mailing list