[PATCH v7 03/15] ahci-platform: Add support for an optional regulator for sata-target power

[Hans de Goede]

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 .../devicetree/bindings/ata/ahci-platform.txt      |  1 +
 drivers/ata/ahci.h                                 |  2 ++
 drivers/ata/ahci_platform.c                        | 36 ++++++++++++++++++++--
 3 files changed, 37 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index 3ced07d..1ac807f 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -11,6 +11,7 @@ Required properties:
 Optional properties:
 - dma-coherent      : Present if dma operations are coherent
 - clocks            : a list of phandle + clock specifier pairs
+- target-supply     : regulator for SATA target power
 
 Example:
         sata at ffe08000 {
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index c12862b..bf8100c 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -37,6 +37,7 @@
 
 #include <linux/clk.h>
 #include <linux/libata.h>
+#include <linux/regulator/consumer.h>
 
 /* Enclosure Management Control */
 #define EM_CTRL_MSG_TYPE              0x000f0000
@@ -323,6 +324,7 @@ struct ahci_host_priv {
 	u32			em_buf_sz;	/* EM buffer size in byte */
 	u32			em_msg_type;	/* EM message type */
 	struct clk		*clks[AHCI_MAX_CLKS]; /* Optional */
+	struct regulator	*target_pwr;	/* Optional */
 	void			*plat_data;	/* Other platform data */
 	/*
 	 * Optional ahci_start_engine override, if not set this gets set to the
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 609975d..907c076 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -192,6 +192,14 @@ static int ahci_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	hpriv->target_pwr = devm_regulator_get_optional(dev, "target");
+	if (IS_ERR(hpriv->target_pwr)) {
+		rc = PTR_ERR(hpriv->target_pwr);
+		if (rc == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		hpriv->target_pwr = NULL;
+	}
+
 	for (i = 0; i < AHCI_MAX_CLKS; i++) {
 		/*
 		 * For now we must use clk_get(dev, NULL) for the first clock,
@@ -213,9 +221,15 @@ static int ahci_probe(struct platform_device *pdev)
 		hpriv->clks[i] = clk;
 	}
 
+	if (hpriv->target_pwr) {
+		rc = regulator_enable(hpriv->target_pwr);
+		if (rc)
+			goto free_clk;
+	}
+
 	rc = ahci_enable_clks(dev, hpriv);
 	if (rc)
-		goto free_clk;
+		goto disable_regulator;
 
 	/*
 	 * Some platforms might need to prepare for mmio region access,
@@ -298,6 +312,9 @@ pdata_exit:
 		pdata->exit(dev);
 disable_unprepare_clk:
 	ahci_disable_clks(hpriv);
+disable_regulator:
+	if (hpriv->target_pwr)
+		regulator_disable(hpriv->target_pwr);
 free_clk:
 	ahci_put_clks(hpriv);
 	return rc;
@@ -314,6 +331,9 @@ static void ahci_host_stop(struct ata_host *host)
 
 	ahci_disable_clks(hpriv);
 	ahci_put_clks(hpriv);
+
+	if (hpriv->target_pwr)
+		regulator_disable(hpriv->target_pwr);
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -350,6 +370,9 @@ static int ahci_suspend(struct device *dev)
 
 	ahci_disable_clks(hpriv);
 
+	if (hpriv->target_pwr)
+		regulator_disable(hpriv->target_pwr);
+
 	return 0;
 }
 
@@ -360,9 +383,15 @@ static int ahci_resume(struct device *dev)
 	struct ahci_host_priv *hpriv = host->private_data;
 	int rc;
 
+	if (hpriv->target_pwr) {
+		rc = regulator_enable(hpriv->target_pwr);
+		if (rc)
+			return rc;
+	}
+
 	rc = ahci_enable_clks(dev, hpriv);
 	if (rc)
-		return rc;
+		goto disable_regulator;
 
 	if (pdata && pdata->resume) {
 		rc = pdata->resume(dev);
@@ -384,6 +413,9 @@ static int ahci_resume(struct device *dev)
 
 disable_unprepare_clk:
 	ahci_disable_clks(hpriv);
+disable_regulator:
+	if (hpriv->target_pwr)
+		regulator_disable(hpriv->target_pwr);
 
 	return rc;
 }
-- 
1.9.0