[PATCH RESEND v2 4/4] ARM: dts: exynos5440: convert magic numbers to macros in clock bindings
Andrzej Hajda
a.hajda at samsung.com
Mon Feb 24 08:23:00 EST 2014
The patch replaces magic numbers with macros defined in DT header
in exynos5440 clock bindings.
Signed-off-by: Andrzej Hajda <a.hajda at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
Acked-by: Tomasz Figa <t.figa at samsung.com>
Acked-by: Mike Turquette <mturquette at linaro.org>
---
.../devicetree/bindings/clock/exynos5440-clock.txt | 45 +++-------------------
arch/arm/boot/dts/exynos5440.dtsi | 33 ++++++++--------
2 files changed, 23 insertions(+), 55 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
index 9955dc9..5f7005f 100644
--- a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
@@ -12,45 +12,12 @@ Required Properties:
- #clock-cells: should be 1.
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume.
-
-
- [Core Clocks]
-
- Clock ID
- ----------------------------
-
- xtal 1
- arm_clk 2
-
- [Peripheral Clock Gates]
-
- Clock ID
- ----------------------------
-
- spi_baud 16
- pb0_250 17
- pr0_250 18
- pr1_250 19
- b_250 20
- b_125 21
- b_200 22
- sata 23
- usb 24
- gmac0 25
- cs250 26
- pb0_250_o 27
- pr0_250_o 28
- pr1_250_o 29
- b_250_o 30
- b_125_o 31
- b_200_o 32
- sata_o 33
- usb_o 34
- gmac0_o 35
- cs250_o 36
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5440.h header and can be used in device
+tree sources.
Example: An example of a clock controller node is listed below.
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 02a0a12..75c7b89 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -9,6 +9,7 @@
* published by the Free Software Foundation.
*/
+#include <dt-bindings/clock/exynos5440.h>
#include "skeleton.dtsi"
/ {
@@ -105,7 +106,7 @@
compatible = "samsung,exynos4210-uart";
reg = <0xB0000 0x1000>;
interrupts = <0 2 0>;
- clocks = <&clock 21>, <&clock 21>;
+ clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
clock-names = "uart", "clk_uart_baud0";
};
@@ -113,7 +114,7 @@
compatible = "samsung,exynos4210-uart";
reg = <0xC0000 0x1000>;
interrupts = <0 3 0>;
- clocks = <&clock 21>, <&clock 21>;
+ clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
clock-names = "uart", "clk_uart_baud0";
};
@@ -125,7 +126,7 @@
#size-cells = <0>;
samsung,spi-src-clk = <0>;
num-cs = <1>;
- clocks = <&clock 21>, <&clock 16>;
+ clocks = <&clock CLK_B_125>, <&clock CLK_SPI_BAUD>;
clock-names = "spi", "spi_busclk0";
};
@@ -161,7 +162,7 @@
interrupts = <0 5 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 21>;
+ clocks = <&clock CLK_B_125>;
clock-names = "i2c";
};
@@ -171,7 +172,7 @@
interrupts = <0 6 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 21>;
+ clocks = <&clock CLK_B_125>;
clock-names = "i2c";
};
@@ -179,7 +180,7 @@
compatible = "samsung,s3c2410-wdt";
reg = <0x110000 0x1000>;
interrupts = <0 1 0>;
- clocks = <&clock 21>;
+ clocks = <&clock CLK_B_125>;
clock-names = "watchdog";
};
@@ -190,7 +191,7 @@
interrupts = <0 31 4>;
interrupt-names = "macirq";
phy-mode = "sgmii";
- clocks = <&clock 25>;
+ clocks = <&clock CLK_GMAC0>;
clock-names = "stmmaceth";
};
@@ -206,7 +207,7 @@
compatible = "samsung,s3c6410-rtc";
reg = <0x130000 0x1000>;
interrupts = <0 17 0>, <0 16 0>;
- clocks = <&clock 21>;
+ clocks = <&clock CLK_B_125>;
clock-names = "rtc";
};
@@ -214,7 +215,7 @@
compatible = "samsung,exynos5440-tmu";
reg = <0x160118 0x230>, <0x160368 0x10>;
interrupts = <0 58 0>;
- clocks = <&clock 21>;
+ clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
};
@@ -222,7 +223,7 @@
compatible = "samsung,exynos5440-tmu";
reg = <0x16011C 0x230>, <0x160368 0x10>;
interrupts = <0 58 0>;
- clocks = <&clock 21>;
+ clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
};
@@ -230,7 +231,7 @@
compatible = "samsung,exynos5440-tmu";
reg = <0x160120 0x230>, <0x160368 0x10>;
interrupts = <0 58 0>;
- clocks = <&clock 21>;
+ clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
};
@@ -238,7 +239,7 @@
compatible = "snps,exynos5440-ahci";
reg = <0x210000 0x10000>;
interrupts = <0 30 0>;
- clocks = <&clock 23>;
+ clocks = <&clock CLK_SATA>;
clock-names = "sata";
};
@@ -246,7 +247,7 @@
compatible = "samsung,exynos5440-ohci";
reg = <0x220000 0x1000>;
interrupts = <0 29 0>;
- clocks = <&clock 24>;
+ clocks = <&clock CLK_USB>;
clock-names = "usbhost";
};
@@ -254,7 +255,7 @@
compatible = "samsung,exynos5440-ehci";
reg = <0x221000 0x1000>;
interrupts = <0 29 0>;
- clocks = <&clock 24>;
+ clocks = <&clock CLK_USB>;
clock-names = "usbhost";
};
@@ -264,7 +265,7 @@
0x270000 0x1000
0x271000 0x40>;
interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
- clocks = <&clock 28>, <&clock 27>;
+ clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
clock-names = "pcie", "pcie_bus";
#address-cells = <3>;
#size-cells = <2>;
@@ -285,7 +286,7 @@
0x272000 0x1000
0x271040 0x40>;
interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
- clocks = <&clock 29>, <&clock 27>;
+ clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
clock-names = "pcie", "pcie_bus";
#address-cells = <3>;
#size-cells = <2>;
--
1.8.3.2
More information about the linux-arm-kernel
mailing list