[PATCHv2 10/16] ARM: OMAP2+: use pdata quirks for iommu reset lines

[Suman Anna]

Hi Tony,

On 02/26/2014 11:17 AM, Tony Lindgren wrote:
> * Suman Anna <s-anna at ti.com> [140213 10:19]:
>> The OMAP iommu driver performs the reset management for the
>> iommu instances in processor sub-systems using the omap_device
>> API which are currently supplied as platform data ops. Use pdata
>> quirks to maintain the functionality as the OMAP iommu driver
>> gets converted to use DT nodes, until the reset portions are
>> decoupled from omap_hwmod/omap_device into a separate reset
>> driver.
>>
>> This patch adds the pdata quirks for the reset management of
>> iommus within the DSP (OMAP3 & OMAP4) and IPU subsystems (OMAP4).
>>
>> Signed-off-by: Suman Anna <s-anna at ti.com>
>
> Looks OK, but I suggest you separate out the remaining patches in
> this series into another clean-up series. Then the clean-up series
> can be merged later on as these have a good chance of conflicting
> with other stuff.

Only patches 14 through 16 are cleanup patches. Patches 12 and 13 are 
adding OMAP5 functionality, and Patch11 is fixing up OMAP3 IVA. I would 
have to drop Patch14 and Patch16 until OMAP3 is completely DT, so will 
drop them for now. Let me know if you want me to split out the remaining 
applicable patches that are in arch/arm/ into a separate series.

regards
Suman

>
> Tony
>
>> ---
>>   arch/arm/mach-omap2/pdata-quirks.c | 20 ++++++++++++++++++++
>>   1 file changed, 20 insertions(+)
>>
>> diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
>> index 3d5b24d..74e094a 100644
>> --- a/arch/arm/mach-omap2/pdata-quirks.c
>> +++ b/arch/arm/mach-omap2/pdata-quirks.c
>> @@ -16,12 +16,14 @@
>>   #include <linux/wl12xx.h>
>>
>>   #include <linux/platform_data/pinctrl-single.h>
>> +#include <linux/platform_data/iommu-omap.h>
>>
>>   #include "am35xx.h"
>>   #include "common.h"
>>   #include "common-board-devices.h"
>>   #include "dss-common.h"
>>   #include "control.h"
>> +#include "omap_device.h"
>>
>>   struct pdata_init {
>>   	const char *compatible;
>> @@ -92,6 +94,12 @@ static void __init hsmmc2_internal_input_clk(void)
>>   	omap_ctrl_writel(reg, OMAP343X_CONTROL_DEVCONF1);
>>   }
>>
>> +static struct iommu_platform_data omap3_iommu_pdata = {
>> +	.reset_name = "mmu",
>> +	.assert_reset = omap_device_assert_hardreset,
>> +	.deassert_reset = omap_device_deassert_hardreset,
>> +};
>> +
>>   static int omap3_sbc_t3730_twl_callback(struct device *dev,
>>   					   unsigned gpio,
>>   					   unsigned ngpio)
>> @@ -185,6 +193,12 @@ static void __init omap4_panda_legacy_init(void)
>>   	legacy_init_ehci_clk("auxclk3_ck");
>>   	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53);
>>   }
>> +
>> +static struct iommu_platform_data omap4_iommu_pdata = {
>> +	.reset_name = "mmu_cache",
>> +	.assert_reset = omap_device_assert_hardreset,
>> +	.deassert_reset = omap_device_deassert_hardreset,
>> +};
>>   #endif
>>
>>   #ifdef CONFIG_SOC_OMAP5
>> @@ -240,6 +254,8 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
>>   #ifdef CONFIG_ARCH_OMAP3
>>   	OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata),
>>   	OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata),
>> +	OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
>> +		       &omap3_iommu_pdata),
>>   	/* Only on am3517 */
>>   	OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
>>   	OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
>> @@ -248,6 +264,10 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
>>   #ifdef CONFIG_ARCH_OMAP4
>>   	OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata),
>>   	OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata),
>> +	OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
>> +		       &omap4_iommu_pdata),
>> +	OF_DEV_AUXDATA("ti,omap4-iommu", 0x55082000, "55082000.mmu",
>> +		       &omap4_iommu_pdata),
>>   #endif
>>   	{ /* sentinel */ },
>>   };
>> --
>> 1.8.5.3
>>