[PATCH v2 1/4] pci: OF: Fix the conversion of IO ranges into IO resources.
Andrew Murray
amurray at embedded-bits.co.uk
Thu Feb 27 08:22:19 EST 2014
On 27 February 2014 13:06, Liviu Dudau <Liviu.Dudau at arm.com> wrote:
>
> The ranges property for a host bridge controller in DT describes
> the mapping between the PCI bus address and the CPU physical address.
> The resources framework however expects that the IO resources start
> at a pseudo "port" address 0 (zero) and have a maximum size of 64kb.
Is this just in the case of ARM? (I've tried to keep up with the
conversation, but apologies if I've misunderstood).
> The conversion from pci ranges to resources failed to take that into
> account.
>
> In the process move the function into drivers/of/address.c as it
> now depends on pci_address_to_pio() code.
>
> Signed-off-by: Liviu Dudau <Liviu.Dudau at arm.com>
>
> diff --git a/drivers/of/address.c b/drivers/of/address.c
> index 1a54f1f..7cf2b16 100644
> --- a/drivers/of/address.c
> +++ b/drivers/of/address.c
> @@ -719,3 +719,34 @@ void __iomem *of_iomap(struct device_node *np, int index)
> return ioremap(res.start, resource_size(&res));
> }
> EXPORT_SYMBOL(of_iomap);
> +
> +/**
> + * of_pci_range_to_resource - Create a resource from an of_pci_range
> + * @range: the PCI range that describes the resource
> + * @np: device node where the range belongs to
> + * @res: pointer to a valid resource that will be updated to
> + * reflect the values contained in the range.
> + * Note that if the range is an IO range, the resource will be converted
> + * using pci_address_to_pio() which can fail if it is called to early or
> + * if the range cannot be matched to any host bridge IO space.
> + */
> +void of_pci_range_to_resource(struct of_pci_range *range,
> + struct device_node *np, struct resource *res)
> +{
> + res->flags = range->flags;
> + if (res->flags & IORESOURCE_IO) {
> + unsigned long port;
> + port = pci_address_to_pio(range->pci_addr);
Is this likely to break existing users of of_pci_range_to_resource?
For example arch/mips: IO_SPACE_LIMIT defaults to 0xffff and there is
no overridden implementation for pci_address_to_pio, therefore this
will set res->start to OF_BAD_ADDR whereas previously it would have
been the CPU address for I/O (assuming the cpu_addr was previously >
64K).
I have no idea if I/O previously worked for mips, but this patch seems
to change that behavior. It may be a similar story for microblaze and
powerpc.
Andrew Murray
> + if (port == (unsigned long)-1) {
> + res->start = (resource_size_t)OF_BAD_ADDR;
> + res->end = (resource_size_t)OF_BAD_ADDR;
> + return;
> + }
> + res->start = port;
> + } else {
> + res->start = range->cpu_addr;
> + }
> + res->end = res->start + range->size - 1;
> + res->parent = res->child = res->sibling = NULL;
> + res->name = np->full_name;
> +}
> diff --git a/include/linux/of_address.h b/include/linux/of_address.h
> index 5f6ed6b..a667762 100644
> --- a/include/linux/of_address.h
> +++ b/include/linux/of_address.h
> @@ -23,17 +23,8 @@ struct of_pci_range {
> #define for_each_of_pci_range(parser, range) \
> for (; of_pci_range_parser_one(parser, range);)
>
> -static inline void of_pci_range_to_resource(struct of_pci_range *range,
> - struct device_node *np,
> - struct resource *res)
> -{
> - res->flags = range->flags;
> - res->start = range->cpu_addr;
> - res->end = range->cpu_addr + range->size - 1;
> - res->parent = res->child = res->sibling = NULL;
> - res->name = np->full_name;
> -}
> -
> +extern void of_pci_range_to_resource(struct of_pci_range *range,
> + struct device_node *np, struct resource *res);
> /* Translate a DMA address from device space to CPU space */
> extern u64 of_translate_dma_address(struct device_node *dev,
> const __be32 *in_addr);
> --
> 1.9.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the linux-arm-kernel
mailing list