[PATCH 3/3] ARM: mvebu: use macros for interrupt flags on Armada 375/38x
Gregory CLEMENT
gregory.clement at free-electrons.com
Thu Feb 20 10:35:05 EST 2014
Hi Thomas,
On 20/02/2014 12:11, Thomas Petazzoni wrote:
> Instead of hardcoding the values of the interrupt flags, use the
> macros provided by <include/dt-bindings/interrupt-controller/irq.h>
> and <include/dt-bindings/interrupt-controller/arm-gic.h> for the
> Armada 375 and Armada 38x Device Tree files.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
This patch emphasizes the fact that we set the irq type by default, whereas
before using device tree, it was the exception. I know that most of the other
dtsi using GIC also set it now. So I am fine with it.But I wonder why it was
not better to use IRQ_TYPE_NONE by default (which in the code means don't set
the irq type).
Of course it is not related with the patch itself which just use the macro and
doesn't change any value, so:
Acked-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
Thanks,
Gregory
> ---
> arch/arm/boot/dts/armada-375.dtsi | 57 +++++++++++++++++++++------------------
> arch/arm/boot/dts/armada-380.dtsi | 6 ++---
> arch/arm/boot/dts/armada-385.dtsi | 8 +++---
> arch/arm/boot/dts/armada-38x.dtsi | 45 +++++++++++++++++--------------
> 4 files changed, 63 insertions(+), 53 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
> index 23d497f..3877693 100644
> --- a/arch/arm/boot/dts/armada-375.dtsi
> +++ b/arch/arm/boot/dts/armada-375.dtsi
> @@ -13,6 +13,7 @@
>
> #include "skeleton.dtsi"
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
>
> @@ -130,7 +131,7 @@
> timer at c600 {
> compatible = "arm,cortex-a9-twd-timer";
> reg = <0xc600 0x20>;
> - interrupts = <GIC_PPI 13 0x301>;
> + interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
> clocks = <&coreclk 2>;
> };
>
> @@ -149,7 +150,7 @@
> #address-cells = <1>;
> #size-cells = <0>;
> cell-index = <0>;
> - interrupts = <GIC_SPI 1 0x4>;
> + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&coreclk 0>;
> status = "disabled";
> };
> @@ -160,7 +161,7 @@
> #address-cells = <1>;
> #size-cells = <0>;
> cell-index = <1>;
> - interrupts = <GIC_SPI 63 0x4>;
> + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&coreclk 0>;
> status = "disabled";
> };
> @@ -170,7 +171,7 @@
> reg = <0x11000 0x20>;
> #address-cells = <1>;
> #size-cells = <0>;
> - interrupts = <GIC_SPI 2 0x4>;
> + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> timeout-ms = <1000>;
> clocks = <&coreclk 0>;
> status = "disabled";
> @@ -181,7 +182,7 @@
> reg = <0x11100 0x20>;
> #address-cells = <1>;
> #size-cells = <0>;
> - interrupts = <GIC_SPI 3 0x4>;
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> timeout-ms = <1000>;
> clocks = <&coreclk 0>;
> status = "disabled";
> @@ -191,7 +192,7 @@
> compatible = "snps,dw-apb-uart";
> reg = <0x12000 0x100>;
> reg-shift = <2>;
> - interrupts = <GIC_SPI 12 4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> reg-io-width = <1>;
> status = "disabled";
> };
> @@ -200,7 +201,7 @@
> compatible = "snps,dw-apb-uart";
> reg = <0x12100 0x100>;
> reg-shift = <2>;
> - interrupts = <GIC_SPI 13 4>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> reg-io-width = <1>;
> status = "disabled";
> };
> @@ -249,8 +250,10 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> - interrupts = <GIC_SPI 53 0x4>, <GIC_SPI 54 0x4>,
> - <GIC_SPI 55 0x4>, <GIC_SPI 56 0x4>;
> + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> gpio1: gpio at 18140 {
> @@ -261,8 +264,10 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> - interrupts = <GIC_SPI 58 0x4>, <GIC_SPI 59 0x4>,
> - <GIC_SPI 60 0x4>, <GIC_SPI 61 0x4>;
> + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> gpio2: gpio at 18180 {
> @@ -273,7 +278,7 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> - interrupts = <GIC_SPI 62 0x4>;
> + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> system-controller at 18200 {
> @@ -300,16 +305,16 @@
> #size-cells = <1>;
> interrupt-controller;
> msi-controller;
> - interrupts = <GIC_PPI 15 0x4>;
> + interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> timer at 20300 {
> compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
> reg = <0x20300 0x30>, <0x21040 0x30>;
> - interrupts-extended = <&gic GIC_SPI 8 4>,
> - <&gic GIC_SPI 9 4>,
> - <&gic GIC_SPI 10 4>,
> - <&gic GIC_SPI 11 4>,
> + interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> + <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
> + <&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
> <&mpic 5>,
> <&mpic 6>;
> clocks = <&coreclk 0>;
> @@ -323,12 +328,12 @@
> status = "okay";
>
> xor00 {
> - interrupts = <GIC_SPI 22 0x4>;
> + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> dmacap,memcpy;
> dmacap,xor;
> };
> xor01 {
> - interrupts = <GIC_SPI 23 0x4>;
> + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> dmacap,memcpy;
> dmacap,xor;
> dmacap,memset;
> @@ -343,12 +348,12 @@
> status = "okay";
>
> xor10 {
> - interrupts = <GIC_SPI 65 0x4>;
> + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
> dmacap,memcpy;
> dmacap,xor;
> };
> xor11 {
> - interrupts = <GIC_SPI 66 0x4>;
> + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
> dmacap,memcpy;
> dmacap,xor;
> dmacap,memset;
> @@ -358,7 +363,7 @@
> sata at a0000 {
> compatible = "marvell,orion-sata";
> reg = <0xa0000 0x5000>;
> - interrupts = <GIC_SPI 26 0x4>;
> + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gateclk 14>, <&gateclk 20>;
> clock-names = "0", "1";
> status = "disabled";
> @@ -369,7 +374,7 @@
> reg = <0xd0000 0x54>;
> #address-cells = <1>;
> #size-cells = <1>;
> - interrupts = <GIC_SPI 84 0x4>;
> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gateclk 11>;
> status = "disabled";
> };
> @@ -377,7 +382,7 @@
> mvsdio at d4000 {
> compatible = "marvell,orion-sdio";
> reg = <0xd4000 0x200>;
> - interrupts = <GIC_SPI 25 0x4>;
> + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gateclk 17>;
> bus-width = <4>;
> cap-sdio-irq;
> @@ -430,7 +435,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
> 0x81000000 0 0 0x81000000 0x1 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 29 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> marvell,pcie-port = <0>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 5>;
> @@ -447,7 +452,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
> 0x81000000 0 0 0x81000000 0x2 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 33 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> marvell,pcie-port = <0>;
> marvell,pcie-lane = <1>;
> clocks = <&gateclk 6>;
> diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
> index 678ba3d..068031f 100644
> --- a/arch/arm/boot/dts/armada-380.dtsi
> +++ b/arch/arm/boot/dts/armada-380.dtsi
> @@ -70,7 +70,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
> 0x81000000 0 0 0x81000000 0x1 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 29 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> marvell,pcie-port = <0>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 8>;
> @@ -88,7 +88,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
> 0x81000000 0 0 0x81000000 0x2 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 33 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> marvell,pcie-port = <1>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 5>;
> @@ -106,7 +106,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
> 0x81000000 0 0 0x81000000 0x3 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 70 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> marvell,pcie-port = <2>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 6>;
> diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
> index 055bc2f..e2919f0 100644
> --- a/arch/arm/boot/dts/armada-385.dtsi
> +++ b/arch/arm/boot/dts/armada-385.dtsi
> @@ -81,7 +81,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
> 0x81000000 0 0 0x81000000 0x1 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 29 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> marvell,pcie-port = <0>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 8>;
> @@ -99,7 +99,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
> 0x81000000 0 0 0x81000000 0x2 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 33 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> marvell,pcie-port = <1>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 5>;
> @@ -117,7 +117,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
> 0x81000000 0 0 0x81000000 0x3 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 70 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> marvell,pcie-port = <2>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 6>;
> @@ -138,7 +138,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
> 0x81000000 0 0 0x81000000 0x4 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 71 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> marvell,pcie-port = <3>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 7>;
> diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
> index 502d21a..812ce28 100644
> --- a/arch/arm/boot/dts/armada-38x.dtsi
> +++ b/arch/arm/boot/dts/armada-38x.dtsi
> @@ -14,6 +14,7 @@
>
> #include "skeleton.dtsi"
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
>
> @@ -110,7 +111,7 @@
> timer at c600 {
> compatible = "arm,cortex-a9-twd-timer";
> reg = <0xc600 0x20>;
> - interrupts = <GIC_PPI 13 0x301>;
> + interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
> clocks = <&coreclk 2>;
> };
>
> @@ -129,7 +130,7 @@
> #address-cells = <1>;
> #size-cells = <0>;
> cell-index = <0>;
> - interrupts = <GIC_SPI 1 0x4>;
> + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&coreclk 0>;
> status = "disabled";
> };
> @@ -140,7 +141,7 @@
> #address-cells = <1>;
> #size-cells = <0>;
> cell-index = <1>;
> - interrupts = <GIC_SPI 63 0x4>;
> + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&coreclk 0>;
> status = "disabled";
> };
> @@ -150,7 +151,7 @@
> reg = <0x11000 0x20>;
> #address-cells = <1>;
> #size-cells = <0>;
> - interrupts = <GIC_SPI 2 0x4>;
> + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> timeout-ms = <1000>;
> clocks = <&coreclk 0>;
> status = "disabled";
> @@ -161,7 +162,7 @@
> reg = <0x11100 0x20>;
> #address-cells = <1>;
> #size-cells = <0>;
> - interrupts = <GIC_SPI 3 0x4>;
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> timeout-ms = <1000>;
> clocks = <&coreclk 0>;
> status = "disabled";
> @@ -171,7 +172,7 @@
> compatible = "snps,dw-apb-uart";
> reg = <0x12000 0x100>;
> reg-shift = <2>;
> - interrupts = <GIC_SPI 12 4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> reg-io-width = <1>;
> status = "disabled";
> };
> @@ -180,7 +181,7 @@
> compatible = "snps,dw-apb-uart";
> reg = <0x12100 0x100>;
> reg-shift = <2>;
> - interrupts = <GIC_SPI 13 4>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> reg-io-width = <1>;
> status = "disabled";
> };
> @@ -198,8 +199,10 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> - interrupts = <GIC_SPI 53 0x4>, <GIC_SPI 54 0x4>,
> - <GIC_SPI 55 0x4>, <GIC_SPI 56 0x4>;
> + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> gpio1: gpio at 18140 {
> @@ -210,8 +213,10 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> - interrupts = <GIC_SPI 58 0x4>, <GIC_SPI 59 0x4>,
> - <GIC_SPI 60 0x4>, <GIC_SPI 61 0x4>;
> + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> system-controller at 18200 {
> @@ -245,17 +250,17 @@
> #size-cells = <1>;
> interrupt-controller;
> msi-controller;
> - interrupts = <GIC_PPI 15 0x4>;
> + interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> timer at 20300 {
> compatible = "marvell,armada-380-timer",
> "marvell,armada-xp-timer";
> reg = <0x20300 0x30>, <0x21040 0x30>;
> - interrupts-extended = <&gic GIC_SPI 8 4>,
> - <&gic GIC_SPI 9 4>,
> - <&gic GIC_SPI 10 4>,
> - <&gic GIC_SPI 11 4>,
> + interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> + <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
> + <&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
> <&mpic 5>,
> <&mpic 6>;
> clocks = <&coreclk 2>, <&refclk>;
> @@ -286,12 +291,12 @@
> status = "okay";
>
> xor00 {
> - interrupts = <GIC_SPI 22 0x4>;
> + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> dmacap,memcpy;
> dmacap,xor;
> };
> xor01 {
> - interrupts = <GIC_SPI 23 0x4>;
> + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> dmacap,memcpy;
> dmacap,xor;
> dmacap,memset;
> @@ -306,12 +311,12 @@
> status = "okay";
>
> xor10 {
> - interrupts = <GIC_SPI 65 0x4>;
> + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
> dmacap,memcpy;
> dmacap,xor;
> };
> xor11 {
> - interrupts = <GIC_SPI 66 0x4>;
> + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
> dmacap,memcpy;
> dmacap,xor;
> dmacap,memset;
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
More information about the linux-arm-kernel
mailing list