[PATCH 0/6] BCM59056 PMU regulator support
Lee Jones
lee.jones at linaro.org
Tue Feb 4 08:40:43 EST 2014
> The BCM59056 is a multi-function power management unit used with the
> BCM281xx family of SoCs. This series adds an MFD and voltage regulator
> driver to support the BCM59056. The bcm28155-ap DT support is updated
> to enable use of regulators on the otg and sdhci peripherals.
>
> Matt Porter (6):
> i2c: bcm-kona: register with subsys_initcall
> regulator: add bcm59056 pmu DT binding
> mfd: add bcm59056 pmu driver
> regulator: add bcm59056 regulator driver
> ARM: configs: bcm_defconfig: enable bcm59056 regulator support
> ARM: dts: add bcm59056 pmu support and enable for bcm28155-ap
>
> .../devicetree/bindings/regulator/bcm59056.txt | 37 ++
> arch/arm/boot/dts/bcm28155-ap.dts | 41 ++
> arch/arm/boot/dts/bcm59056.dtsi | 158 ++++++++
> arch/arm/configs/bcm_defconfig | 7 +
> drivers/i2c/busses/i2c-bcm-kona.c | 14 +-
> drivers/mfd/Kconfig | 8 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/bcm59056.c | 119 ++++++
> drivers/regulator/Kconfig | 8 +
> drivers/regulator/Makefile | 1 +
> drivers/regulator/bcm59056-regulator.c | 445 +++++++++++++++++++++
> include/linux/mfd/bcm59056.h | 35 ++
> 12 files changed, 873 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/regulator/bcm59056.txt
> create mode 100644 arch/arm/boot/dts/bcm59056.dtsi
> create mode 100644 drivers/mfd/bcm59056.c
> create mode 100644 drivers/regulator/bcm59056-regulator.c
> create mode 100644 include/linux/mfd/bcm59056.h
FYI: Mark's email address is not correct. Not sure where you pulled
this one up from, but he doesn't have access to it anymore.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
More information about the linux-arm-kernel
mailing list