[PATCH v7 11/12] ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes

[Roger Quadros]

The OMAP EHCI and OHCI controllers are not compatible with drivers
other than "ti,ehci-omap" and "ti,ohci-omap3" respectively, so get
rid of the incompatible ids.

CC: Alan Stern <stern at rowland.harvard.edu>
Signed-off-by: Roger Quadros <rogerq at ti.com>
---
 arch/arm/boot/dts/omap3.dtsi | 4 ++--
 arch/arm/boot/dts/omap4.dtsi | 4 ++--
 arch/arm/boot/dts/omap5.dtsi | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index a5fc83b..8e7de9e 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -634,14 +634,14 @@
 			ranges;
 
 			usbhsohci: ohci at 48064400 {
-				compatible = "ti,ohci-omap3", "usb-ohci";
+				compatible = "ti,ohci-omap3";
 				reg = <0x48064400 0x400>;
 				interrupt-parent = <&intc>;
 				interrupts = <76>;
 			};
 
 			usbhsehci: ehci at 48064800 {
-				compatible = "ti,ehci-omap", "usb-ehci";
+				compatible = "ti,ehci-omap";
 				reg = <0x48064800 0x400>;
 				interrupt-parent = <&intc>;
 				interrupts = <77>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 39a05ce..ff1b057 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -705,14 +705,14 @@
 				      "refclk_60m_ext_p2";
 
 			usbhsohci: ohci at 4a064800 {
-				compatible = "ti,ohci-omap3", "usb-ohci";
+				compatible = "ti,ohci-omap3";
 				reg = <0x4a064800 0x400>;
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			usbhsehci: ehci at 4a064c00 {
-				compatible = "ti,ehci-omap", "usb-ehci";
+				compatible = "ti,ehci-omap";
 				reg = <0x4a064c00 0x400>;
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index d4dae48..f65aa65 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -783,14 +783,14 @@
 				      "refclk_60m_ext_p2";
 
 			usbhsohci: ohci at 4a064800 {
-				compatible = "ti,ohci-omap3", "usb-ohci";
+				compatible = "ti,ohci-omap3";
 				reg = <0x4a064800 0x400>;
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			usbhsehci: ehci at 4a064c00 {
-				compatible = "ti,ehci-omap", "usb-ehci";
+				compatible = "ti,ehci-omap";
 				reg = <0x4a064c00 0x400>;
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-- 
1.8.3.2