[PATCH v10 04/15] usb: doc: phy-mxs: update binding for adding anatop phandle
Mark Rutland
mark.rutland at arm.com
Fri Feb 21 04:14:44 EST 2014
On Thu, Feb 20, 2014 at 05:14:33AM +0000, Peter Chen wrote:
> Add anatop phandle which is used to access anatop registers to
> control PHY's power and other USB operations.
>
> Signed-off-by: Peter Chen <peter.chen at freescale.com>
> ---
> Documentation/devicetree/bindings/usb/mxs-phy.txt | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt
> index b43d4c9e..fc6659d 100644
> --- a/Documentation/devicetree/bindings/usb/mxs-phy.txt
> +++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt
> @@ -5,10 +5,12 @@ Required properties:
> for imx6dq and imx6dl, "fsl,imx6sl-usbphy" for imx6sl
> - reg: Should contain registers location and length
> - interrupts: Should contain phy interrupt
> +- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series
This is now required?
What happens to those existing DTBs that claim compatibility with
"fsl,imx6q-usbphy" but don't have an fsl,anatop property?
Thanks,
Mark.
>
> Example:
> usbphy1: usbphy at 020c9000 {
> compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
> reg = <0x020c9000 0x1000>;
> interrupts = <0 44 0x04>;
> + fsl,anatop = <&anatop>;
> };
> --
> 1.7.8
>
>
>
More information about the linux-arm-kernel
mailing list