[PATCH 4/9] Doc/DT: Add DT binding documentation for HDMI Connector

[Russell King - ARM Linux]

On Fri, Feb 28, 2014 at 02:20:11PM +0200, Tomi Valkeinen wrote:
> Add DT binding documentation for HDMI Connector.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
> Reviewed-by: Archit Taneja <archit at ti.com>
> ---
>  .../devicetree/bindings/video/hdmi-connector.txt   | 23 ++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/video/hdmi-connector.txt
> 
> diff --git a/Documentation/devicetree/bindings/video/hdmi-connector.txt b/Documentation/devicetree/bindings/video/hdmi-connector.txt
> new file mode 100644
> index 000000000000..5d25f6a432bb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/hdmi-connector.txt
> @@ -0,0 +1,23 @@
> +HDMI Connector
> +==============
> +
> +Required properties:
> +- compatible: "hdmi-connector"
> +
> +Optional properties:
> +- label: a symbolic name for the connector
> +
> +Required nodes:
> +- Video port for HDMI input
> +
> +Example
> +-------
> +
> +hdmi0: connector at 1 {
> +	compatible = "hdmi-connector";
> +	label = "hdmi";
> +
> +	hdmi_connector_in: endpoint {
> +		remote-endpoint = <&tpd12s015_out>;
> +	};
> +};

It seems rather weird to have DVI connectors having an optional I2C
property, but HDMI (which augments DVI) not having that as at least an
optional property.

I can quite well see the iMX HDMI support needing an i2c bus here.

Also, HDMI has two connector standards - type A and type B, much like
the single vs dual link of DVI.  Again, DRM exposes this to userspace.

-- 
FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly
improving, and getting towards what was expected from it.