[PATCH 4/9] Doc/DT: Add DT binding documentation for HDMI Connector

[Tomi Valkeinen]

Add DT binding documentation for HDMI Connector.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
Reviewed-by: Archit Taneja <archit at ti.com>
---
 .../devicetree/bindings/video/hdmi-connector.txt   | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/hdmi-connector.txt

diff --git a/Documentation/devicetree/bindings/video/hdmi-connector.txt b/Documentation/devicetree/bindings/video/hdmi-connector.txt
new file mode 100644
index 000000000000..5d25f6a432bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/hdmi-connector.txt
@@ -0,0 +1,23 @@
+HDMI Connector
+==============
+
+Required properties:
+- compatible: "hdmi-connector"
+
+Optional properties:
+- label: a symbolic name for the connector
+
+Required nodes:
+- Video port for HDMI input
+
+Example
+-------
+
+hdmi0: connector at 1 {
+	compatible = "hdmi-connector";
+	label = "hdmi";
+
+	hdmi_connector_in: endpoint {
+		remote-endpoint = <&tpd12s015_out>;
+	};
+};
-- 
1.8.3.2