[PATCH 00/11] ARM: dts: sbc-t3x: add support for more boards

[Igor Grinberg]

ping x2!

On 02/12/14 14:38, Igor Grinberg wrote:
> ping!
> 
> On 01/12/14 15:22, Dmitry Lifshitz wrote:
>> Add support for CompuLab SBC-T3530 and SBC-T3517 boards:
>>
>> https://compulab.co.il/products/sbcs/sbc-t3530/
>> https://compulab.co.il/products/sbcs/sbc-t3517/
>>
>> along with respective CoMs - CM-T3530 and CM-T3517:
>>
>> https://compulab.co.il/products/computer-on-modules/cm-t3530/
>> https://compulab.co.il/products/computer-on-modules/cm-t3517/
>>
>> The device tree files have the following structure:
>>
>> omap3-cm-t3x.dtsi
>>  |
>>  |<-- omap3-cm-t3x30.dtsi
>>  |     |
>>  |     |
>>  |     |     -----                  -------          ------------
>>  |     |    | CoM |                | Board |        | Base board |
>>  |     |     -----                  -------          ------------
>>  |     |                                            omap3-sb-t35.dtsi
>>  |     |                                                  |
>>  |     |<-- omap3-cm-t3730.dts <-- omap3-sbc-t3730.dts -->|
>>  |     |                                                  |
>>  |     |<-- omap3-cm-t3530.dts <-- omap3-sbc-t3530.dts -->|
>>  |                                                        |
>>  |<-------- omap3-cm-t3517.dts <-- omap3-sbc-t3517.dts -->|
>>
>>
>> where omap3-cm-t3730.dts, omap3-cm-t3530.dts, omap3-cm-t3517.dts
>> contain CoMs specific data, while omap3-sbc-t3730.dts, omap3-sbc-t3530.dts,
>> omap3-sbc-t3517.dts represent eval boards with respective core modules.
>>
>> This series is based on Tony's omap-for-v3.14/dt branch
>>
>> Dmitry Lifshitz (11):
>>   ARM: dts: sbc-t3x: refactor DT support
>>   ARM: dts: sbc-t3x: disable mmc3
>>   ARM: dts: sb-t35: fix Ethernet power supply
>>   ARM: dts: cm-t3x: add gpio-led pinmux
>>   ARM: dts: cm-t3x30: add twl4030 gpio pullups
>>   ARM: dts: cm-t3x30: add HS USB Host support
>>   ARM: dts: sbc-t3730: add pinmux for usb hub reset
>>   ARM: dts: cm-t3x30: add USB OTG support
>>   ARM: dts: sbc-t3530: add support for sbc-t3530
>>   ARM: dts: sbc-t3517: add support for sbc-t3517
>>   ARM: OMAP2+: make reset pulse for sbc-t3x usb hubs
>>
>>  arch/arm/boot/dts/Makefile            |    4 +
>>  arch/arm/boot/dts/omap3-cm-t3517.dts  |  137 +++++++++++++++++++++++++++++++++
>>  arch/arm/boot/dts/omap3-cm-t3530.dts  |   13 +++
>>  arch/arm/boot/dts/omap3-cm-t3730.dts  |   40 ----------
>>  arch/arm/boot/dts/omap3-cm-t3x.dtsi   |  112 +++++++++++++++++++++++++++
>>  arch/arm/boot/dts/omap3-cm-t3x30.dtsi |   74 +++++++++++++-----
>>  arch/arm/boot/dts/omap3-sb-t35.dtsi   |   30 +++++++-
>>  arch/arm/boot/dts/omap3-sbc-t3517.dts |   44 +++++++++++
>>  arch/arm/boot/dts/omap3-sbc-t3530.dts |   37 +++++++++
>>  arch/arm/boot/dts/omap3-sbc-t3730.dts |   24 +++---
>>  arch/arm/mach-omap2/pdata-quirks.c    |   67 ++++++++++++++++-
>>  11 files changed, 506 insertions(+), 76 deletions(-)
>>  create mode 100644 arch/arm/boot/dts/omap3-cm-t3517.dts
>>  create mode 100644 arch/arm/boot/dts/omap3-cm-t3530.dts
>>  create mode 100644 arch/arm/boot/dts/omap3-cm-t3x.dtsi
>>  create mode 100644 arch/arm/boot/dts/omap3-sbc-t3517.dts
>>  create mode 100644 arch/arm/boot/dts/omap3-sbc-t3530.dts
>>
> 

-- 
Regards,
Igor.