[PATCH 00/11] ARM: dts: sbc-t3x: add support for more boards

[Igor Grinberg]

ping!

On 01/12/14 15:22, Dmitry Lifshitz wrote:
> Add support for CompuLab SBC-T3530 and SBC-T3517 boards:
> 
> https://compulab.co.il/products/sbcs/sbc-t3530/
> https://compulab.co.il/products/sbcs/sbc-t3517/
> 
> along with respective CoMs - CM-T3530 and CM-T3517:
> 
> https://compulab.co.il/products/computer-on-modules/cm-t3530/
> https://compulab.co.il/products/computer-on-modules/cm-t3517/
> 
> The device tree files have the following structure:
> 
> omap3-cm-t3x.dtsi
>  |
>  |<-- omap3-cm-t3x30.dtsi
>  |     |
>  |     |
>  |     |     -----                  -------          ------------
>  |     |    | CoM |                | Board |        | Base board |
>  |     |     -----                  -------          ------------
>  |     |                                            omap3-sb-t35.dtsi
>  |     |                                                  |
>  |     |<-- omap3-cm-t3730.dts <-- omap3-sbc-t3730.dts -->|
>  |     |                                                  |
>  |     |<-- omap3-cm-t3530.dts <-- omap3-sbc-t3530.dts -->|
>  |                                                        |
>  |<-------- omap3-cm-t3517.dts <-- omap3-sbc-t3517.dts -->|
> 
> 
> where omap3-cm-t3730.dts, omap3-cm-t3530.dts, omap3-cm-t3517.dts
> contain CoMs specific data, while omap3-sbc-t3730.dts, omap3-sbc-t3530.dts,
> omap3-sbc-t3517.dts represent eval boards with respective core modules.
> 
> This series is based on Tony's omap-for-v3.14/dt branch
> 
> Dmitry Lifshitz (11):
>   ARM: dts: sbc-t3x: refactor DT support
>   ARM: dts: sbc-t3x: disable mmc3
>   ARM: dts: sb-t35: fix Ethernet power supply
>   ARM: dts: cm-t3x: add gpio-led pinmux
>   ARM: dts: cm-t3x30: add twl4030 gpio pullups
>   ARM: dts: cm-t3x30: add HS USB Host support
>   ARM: dts: sbc-t3730: add pinmux for usb hub reset
>   ARM: dts: cm-t3x30: add USB OTG support
>   ARM: dts: sbc-t3530: add support for sbc-t3530
>   ARM: dts: sbc-t3517: add support for sbc-t3517
>   ARM: OMAP2+: make reset pulse for sbc-t3x usb hubs
> 
>  arch/arm/boot/dts/Makefile            |    4 +
>  arch/arm/boot/dts/omap3-cm-t3517.dts  |  137 +++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/omap3-cm-t3530.dts  |   13 +++
>  arch/arm/boot/dts/omap3-cm-t3730.dts  |   40 ----------
>  arch/arm/boot/dts/omap3-cm-t3x.dtsi   |  112 +++++++++++++++++++++++++++
>  arch/arm/boot/dts/omap3-cm-t3x30.dtsi |   74 +++++++++++++-----
>  arch/arm/boot/dts/omap3-sb-t35.dtsi   |   30 +++++++-
>  arch/arm/boot/dts/omap3-sbc-t3517.dts |   44 +++++++++++
>  arch/arm/boot/dts/omap3-sbc-t3530.dts |   37 +++++++++
>  arch/arm/boot/dts/omap3-sbc-t3730.dts |   24 +++---
>  arch/arm/mach-omap2/pdata-quirks.c    |   67 ++++++++++++++++-
>  11 files changed, 506 insertions(+), 76 deletions(-)
>  create mode 100644 arch/arm/boot/dts/omap3-cm-t3517.dts
>  create mode 100644 arch/arm/boot/dts/omap3-cm-t3530.dts
>  create mode 100644 arch/arm/boot/dts/omap3-cm-t3x.dtsi
>  create mode 100644 arch/arm/boot/dts/omap3-sbc-t3517.dts
>  create mode 100644 arch/arm/boot/dts/omap3-sbc-t3530.dts
> 

-- 
Regards,
Igor.