[PATCH] ARM: dts: imx6sl-evk: Keep VGEN1 regulator always enabled

[Shawn Guo]

On Tue, Feb 18, 2014 at 04:40:04PM -0300, Fabio Estevam wrote:
> On imx6sl-evk board the VGEN1 regulator powers up the NVCC_1.2V domain of the
> imx6sl SoC, so we need to keep it always powered.
> 
> This problem has been observed by the fact that a GPIO connected to an LED could
> not work when the PMIC driver was enabled.
> 
> Keeping VGEN1 regulator always enabled fixes the problem.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>

Applied, thanks.