[PATCH] ARM: dts: imx6sl-evk: Keep VGEN1 regulator always enabled

[Shawn Guo]

On Wed, Feb 19, 2014 at 09:19:59AM +0800, Shawn Guo wrote:
> On Tue, Feb 18, 2014 at 04:40:04PM -0300, Fabio Estevam wrote:
> > On imx6sl-evk board the VGEN1 regulator powers up the NVCC_1.2V domain of the
> > imx6sl SoC, so we need to keep it always powered.
> > 
> > This problem has been observed by the fact that a GPIO connected to an LED could
> > not work when the PMIC driver was enabled.
> > 
> > Keeping VGEN1 regulator always enabled fixes the problem.
> > 
> > Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> 
> Applied, thanks.

Since Mark is questioning this is a correct fix, I'm dropping it for
now.

Shawn