[PATCH] ARM: dts: OMAP2+: Fix boot with multi_v7_defconfig

[Roger Quadros]

The OMAP EHCI controller is not compatible with the EHCI
platform HCD driver so don't claim that we are.

This fixes boot on OMAP platforms with CONFIG_USB_EHCI_HCD_PLATFORM=y
e.g. multi_v7_defconfig

Reported-by: Nishanth Menon <nm at ti.com>
Signed-off-by: Roger Quadros <rogerq at ti.com>
---
 arch/arm/boot/dts/omap3.dtsi | 2 +-
 arch/arm/boot/dts/omap4.dtsi | 2 +-
 arch/arm/boot/dts/omap5.dtsi | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index a5fc83b..6b5dbf8 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -641,7 +641,7 @@
 			};
 
 			usbhsehci: ehci at 48064800 {
-				compatible = "ti,ehci-omap", "usb-ehci";
+				compatible = "ti,ehci-omap";
 				reg = <0x48064800 0x400>;
 				interrupt-parent = <&intc>;
 				interrupts = <77>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index d3f8a6e..f5d754b 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -706,7 +706,7 @@
 			};
 
 			usbhsehci: ehci at 4a064c00 {
-				compatible = "ti,ehci-omap", "usb-ehci";
+				compatible = "ti,ehci-omap";
 				reg = <0x4a064c00 0x400>;
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index a72813a..42fcffd 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -784,7 +784,7 @@
 			};
 
 			usbhsehci: ehci at 4a064c00 {
-				compatible = "ti,ehci-omap", "usb-ehci";
+				compatible = "ti,ehci-omap";
 				reg = <0x4a064c00 0x400>;
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-- 
1.8.3.2