[PATCH 3/4] ARM: dts: OMAP4: Add IOMMU nodes

[Laurent Pinchart]

Hi Suman,

Thank you for the patch.

On Thursday 13 February 2014 12:22:55 Suman Anna wrote:
> From: Florian Vaussard <florian.vaussard at epfl.ch>
> 
> Add the IOMMU nodes for the DSP and IPU subsystems. The external
> address space for DSP starts at 0x20000000 in OMAP4 compared to
> 0x11000000 in OMAP3, and the addresses beyond 0xE0000000 are
> private address space for the Cortex-M3 cores in the IPU subsystem.
> The MMU within the IPU sub-system also supports a bus error back
> capability, not available on the DSP MMU.
> 
> Signed-off-by: Florian Vaussard <florian.vaussard at epfl.ch>
> [s-anna at ti.com: dma-window updates and bus error back addition]
> Signed-off-by: Suman Anna <s-anna at ti.com>
> ---
>  arch/arm/boot/dts/omap4.dtsi | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> index d3f8a6e..1885f90 100644
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -461,6 +461,23 @@
>  			dma-names = "tx", "rx";
>  		};
> 
> +		mmu_dsp: mmu at 4a066000 {
> +			compatible = "ti,omap4-iommu";
> +			reg = <0x4a066000 0xff>;
> +			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "mmu_dsp";
> +			dma-window = <0x20000000 0xdffff000>;
> +		};
> +
> +		mmu_ipu: mmu at 55082000 {
> +			compatible = "ti,omap4-iommu";
> +			reg = <0x55082000 0xff>;
> +			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "mmu_ipu";
> +			dma-window = <0 0xdffff000>;

I'm not too familiar with the M3 MPU in the OMAP4, but doesn't its memory map 
also include other reserved regions, such as 0x55040000- 0x5505ffff to access 
the ISS ?

> +			ti,iommu-bus-err-back;
> +		};
> +
>  		wdt2: wdt at 4a314000 {
>  			compatible = "ti,omap4-wdt", "ti,omap3-wdt";
>  			reg = <0x4a314000 0x80>;

-- 
Regards,

Laurent Pinchart