[PATCH 1/2] ARM: dts: imx6qdl-sabresd: Add hog entry for GPIO4_10
shawn.guo at linaro.org
Sun Feb 16 21:05:21 EST 2014
On Thu, Feb 13, 2014 at 01:53:58PM -0200, Fabio Estevam wrote:
> GPIO4_10 is the GPIO used to turn on the regulator that powers up the codec.
> Add a hog entry for it.
I'm going to be strict on hog pin use. It does not sound like a true
hog pin. Is it possible to have a pinctrl state for that regulator
setting this pin up?
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 1 +
> 1 file changed, 1 insertion(+)
> diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> index 0d816d3..a802265 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> @@ -303,6 +303,7 @@
> MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
> MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000
> MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
> + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x80000000
More information about the linux-arm-kernel