[PATCH v4 8/8] ARM: dts: sun7i: Add ethernet alias for GMAC

[Chen-Yu Tsai]

All Allwinner A20 boards we support can only use either EMAC or GMAC,
as they share the same pins. As we have switched all supported to
GMAC, we should alias GMAC (the active controller) as ethernet0,
so u-boot will insert the MAC address for the correct controller.

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
 arch/arm/boot/dts/sun7i-a20.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 68c889c..1b5fb88 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -17,7 +17,7 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
-		ethernet0 = &emac;
+		ethernet0 = &gmac;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
-- 
1.9.rc1