[PATCH] dma: sdma: Add imx25 compatible
Markus Pargmann
mpa at pengutronix.de
Sun Feb 16 14:10:55 EST 2014
imx25 did not work without a firmware previously.
This patch adds a DT compatible to pass the correct data with the
default script addresses for imx25.
Add imx25 compatible to the list of compatibles in the binding
documentation.
Signed-off-by: Markus Pargmann <mpa at pengutronix.de>
---
Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 16 ++++++++++------
drivers/dma/imx-sdma.c | 1 +
2 files changed, 11 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index 68b83ec..ee9be99 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -1,12 +1,16 @@
* Freescale Smart Direct Memory Access (SDMA) Controller for i.MX
Required properties:
-- compatible : Should be "fsl,imx31-sdma", "fsl,imx31-to1-sdma",
- "fsl,imx31-to2-sdma", "fsl,imx35-sdma", "fsl,imx35-to1-sdma",
- "fsl,imx35-to2-sdma", "fsl,imx51-sdma", "fsl,imx53-sdma" or
- "fsl,imx6q-sdma". The -to variants should be preferred since they
- allow to determnine the correct ROM script addresses needed for
- the driver to work without additional firmware.
+- compatible : Should be one of
+ "fsl,imx25-sdma"
+ "fsl,imx31-sdma", "fsl,imx31-to1-sdma", "fsl,imx31-to2-sdma"
+ "fsl,imx35-sdma", "fsl,imx35-to1-sdma", "fsl,imx35-to2-sdma"
+ "fsl,imx51-sdma"
+ "fsl,imx53-sdma"
+ "fsl,imx6q-sdma"
+ The -to variants should be preferred since they allow to determnine the
+ correct ROM script addresses needed for the driver to work without additional
+ firmware.
- reg : Should contain SDMA registers location and length
- interrupts : Should contain SDMA interrupt
- #dma-cells : Must be <3>.
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index bdefc10..ce2ad7f 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -449,6 +449,7 @@ static const struct of_device_id sdma_dt_ids[] = {
{ .compatible = "fsl,imx51-sdma", .data = &sdma_imx51, },
{ .compatible = "fsl,imx35-sdma", .data = &sdma_imx35, },
{ .compatible = "fsl,imx31-sdma", .data = &sdma_imx31, },
+ { .compatible = "fsl,imx25-sdma", .data = &sdma_imx25, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, sdma_dt_ids);
--
1.8.5.3
More information about the linux-arm-kernel
mailing list