[PATCH 8/9] Doc/DT: Add DT binding documentation for TFP410 encoder
Philipp Zabel
p.zabel at pengutronix.de
Fri Feb 28 08:37:28 EST 2014
Am Freitag, den 28.02.2014, 14:20 +0200 schrieb Tomi Valkeinen:
> Add DT binding documentation for TFP410 encoder
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
> Reviewed-by: Archit Taneja <archit at ti.com>
> ---
> .../devicetree/bindings/video/ti,tfp410.txt | 41 ++++++++++++++++++++++
> 1 file changed, 41 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/video/ti,tfp410.txt
>
> diff --git a/Documentation/devicetree/bindings/video/ti,tfp410.txt b/Documentation/devicetree/bindings/video/ti,tfp410.txt
> new file mode 100644
> index 000000000000..6a5a04627584
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/ti,tfp410.txt
> @@ -0,0 +1,41 @@
> +TFP410 DPI to DVI encoder
> +=========================
> +
> +Required properties:
> +- compatible: "ti,tfp410"
> +
> +Optional properties:
> +- gpios: power-down gpio
Maybe call this powerdown-gpios?
> +Required nodes:
> +- Video port 0 for DPI input
> +- Video port 1 for DVI output
> +
> +Example
> +-------
> +
> +tfp410: encoder at 0 {
> + compatible = "ti,tfp410";
> + gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> +
> + tfp410_in: endpoint at 0 {
> + remote-endpoint = <&dpi_out>;
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> +
> + tfp410_out: endpoint at 0 {
> + remote-endpoint = <&dvi_connector_in>;
> + };
> + };
> + };
> +};
regards
Philipp
More information about the linux-arm-kernel
mailing list