[PATCH 1/5] ARM: omap2: cm-t35: Add regulators and clock for camera sensor

[Igor Grinberg]

Hi Laurent,

On 02/18/14 14:47, Laurent Pinchart wrote:
> Mauro, Tony,
> 
> On Monday 10 February 2014 22:54:40 Laurent Pinchart wrote:
>> The camera sensor will soon require regulators and clocks. Register
>> fixed regulators for its VAA and VDD power supplies and a fixed rate
>> clock for its master clock.
> 
> This patch is a prerequisite for a set of 4 patches that need to go through 
> the linux-media tree. It would simpler if it could go through the same tree as 
> well. Given that arch/arm/mach-omap2/board-cm-t35.c has seen very little 
> activity recently I believe the risk of conflict is pretty low.

Indeed, as we work on DT stuff of cm-t35/3730 and pretty much stopped
updating the board-cm-t35.c file.

> Tony, would 
> that be fine with you ?
> 
>> Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

Acked-by: Igor Grinberg <grinberg at compulab.co.il>

>> ---
>>  arch/arm/mach-omap2/board-cm-t35.c | 16 ++++++++++++++++
>>  1 file changed, 16 insertions(+)
>>
>> diff --git a/arch/arm/mach-omap2/board-cm-t35.c
>> b/arch/arm/mach-omap2/board-cm-t35.c index 8dd0ec8..018353d 100644
>> --- a/arch/arm/mach-omap2/board-cm-t35.c
>> +++ b/arch/arm/mach-omap2/board-cm-t35.c
>> @@ -16,6 +16,8 @@
>>   *
>>   */
>>
>> +#include <linux/clk-provider.h>
>> +#include <linux/clkdev.h>
>>  #include <linux/kernel.h>
>>  #include <linux/init.h>
>>  #include <linux/platform_device.h>
>> @@ -542,8 +544,22 @@ static struct isp_platform_data cm_t35_isp_pdata = {
>>  	.subdevs = cm_t35_isp_subdevs,
>>  };
>>
>> +static struct regulator_consumer_supply cm_t35_camera_supplies[] = {
>> +	REGULATOR_SUPPLY("vaa", "3-005d"),
>> +	REGULATOR_SUPPLY("vdd", "3-005d"),
>> +};
>> +
>>  static void __init cm_t35_init_camera(void)
>>  {
>> +	struct clk *clk;
>> +
>> +	clk = clk_register_fixed_rate(NULL, "mt9t001-clkin", NULL, CLK_IS_ROOT,
>> +				      48000000);
>> +	clk_register_clkdev(clk, NULL, "3-005d");
>> +
>> +	regulator_register_fixed(2, cm_t35_camera_supplies,
>> +				 ARRAY_SIZE(cm_t35_camera_supplies));
>> +
>>  	if (omap3_init_camera(&cm_t35_isp_pdata) < 0)
>>  		pr_warn("CM-T3x: Failed registering camera device!\n");
>>  }
> 

-- 
Regards,
Igor.