[PATCH 1/5] ARM: omap2: cm-t35: Add regulators and clock for camera sensor

[Laurent Pinchart]

Mauro, Tony,

On Monday 10 February 2014 22:54:40 Laurent Pinchart wrote:
> The camera sensor will soon require regulators and clocks. Register
> fixed regulators for its VAA and VDD power supplies and a fixed rate
> clock for its master clock.

This patch is a prerequisite for a set of 4 patches that need to go through 
the linux-media tree. It would simpler if it could go through the same tree as 
well. Given that arch/arm/mach-omap2/board-cm-t35.c has seen very little 
activity recently I believe the risk of conflict is pretty low. Tony, would 
that be fine with you ?

> Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> ---
>  arch/arm/mach-omap2/board-cm-t35.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm/mach-omap2/board-cm-t35.c
> b/arch/arm/mach-omap2/board-cm-t35.c index 8dd0ec8..018353d 100644
> --- a/arch/arm/mach-omap2/board-cm-t35.c
> +++ b/arch/arm/mach-omap2/board-cm-t35.c
> @@ -16,6 +16,8 @@
>   *
>   */
> 
> +#include <linux/clk-provider.h>
> +#include <linux/clkdev.h>
>  #include <linux/kernel.h>
>  #include <linux/init.h>
>  #include <linux/platform_device.h>
> @@ -542,8 +544,22 @@ static struct isp_platform_data cm_t35_isp_pdata = {
>  	.subdevs = cm_t35_isp_subdevs,
>  };
> 
> +static struct regulator_consumer_supply cm_t35_camera_supplies[] = {
> +	REGULATOR_SUPPLY("vaa", "3-005d"),
> +	REGULATOR_SUPPLY("vdd", "3-005d"),
> +};
> +
>  static void __init cm_t35_init_camera(void)
>  {
> +	struct clk *clk;
> +
> +	clk = clk_register_fixed_rate(NULL, "mt9t001-clkin", NULL, CLK_IS_ROOT,
> +				      48000000);
> +	clk_register_clkdev(clk, NULL, "3-005d");
> +
> +	regulator_register_fixed(2, cm_t35_camera_supplies,
> +				 ARRAY_SIZE(cm_t35_camera_supplies));
> +
>  	if (omap3_init_camera(&cm_t35_isp_pdata) < 0)
>  		pr_warn("CM-T3x: Failed registering camera device!\n");
>  }

-- 
Regards,

Laurent Pinchart