[PATCH 1/3] i2c: add DMA support for freescale i2c driver
Yuan Yao
yao.yuan at freescale.com
Thu Feb 27 01:05:14 EST 2014
Add dma support for i2c. This function depend on DMA driver.
You can turn on it by write both the dmas and dma-name properties in dts node.
And you should set ".has_dma_support" as true for dma support in imx_i2c_hwdata struct.
Signed-off-by: Yuan Yao <yao.yuan at freescale.com>
---
drivers/i2c/busses/i2c-imx.c | 358 +++++++++++++++++++++++++++++++++++++++++--
1 file changed, 344 insertions(+), 14 deletions(-)
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index db895fb..6ec392b 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -37,22 +37,27 @@
/** Includes *******************************************************************
*******************************************************************************/
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/dmapool.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/interrupt.h>
-#include <linux/delay.h>
#include <linux/i2c.h>
+#include <linux/init.h>
#include <linux/io.h>
-#include <linux/sched.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_dma.h>
#include <linux/platform_data/i2c-imx.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
/** Defines ********************************************************************
*******************************************************************************/
@@ -63,6 +68,9 @@
/* Default value */
#define IMX_I2C_BIT_RATE 100000 /* 100kHz */
+/* enable DMA if transfer size is bigger than this threshold */
+#define IMX_I2C_DMA_THRESHOLD 16
+
/* IMX I2C registers:
* the I2C register offset is different between SoCs,
* to provid support for all these chips, split the
@@ -88,6 +96,7 @@
#define I2SR_IBB 0x20
#define I2SR_IAAS 0x40
#define I2SR_ICF 0x80
+#define I2CR_DMAEN 0x02
#define I2CR_RSTA 0x04
#define I2CR_TXAK 0x08
#define I2CR_MTX 0x10
@@ -172,6 +181,17 @@ struct imx_i2c_hwdata {
unsigned ndivs;
unsigned i2sr_clr_opcode;
unsigned i2cr_ien_opcode;
+ bool has_dma_support;
+};
+
+struct imx_i2c_dma {
+ struct dma_chan *chan_tx;
+ struct dma_chan *chan_rx;
+ dma_addr_t buf_tx;
+ dma_addr_t buf_rx;
+ unsigned int len_tx;
+ unsigned int len_rx;
+ struct completion cmd_complete;
};
struct imx_i2c_struct {
@@ -184,6 +204,9 @@ struct imx_i2c_struct {
int stopped;
unsigned int ifdr; /* IMX_I2C_IFDR */
const struct imx_i2c_hwdata *hwdata;
+
+ bool use_dma;
+ struct imx_i2c_dma *dma;
};
static const struct imx_i2c_hwdata imx1_i2c_hwdata = {
@@ -193,6 +216,7 @@ static const struct imx_i2c_hwdata imx1_i2c_hwdata = {
.ndivs = ARRAY_SIZE(imx_i2c_clk_div),
.i2sr_clr_opcode = I2SR_CLR_OPCODE_W0C,
.i2cr_ien_opcode = I2CR_IEN_OPCODE_1,
+ .has_dma_support = false,
};
@@ -203,6 +227,7 @@ static const struct imx_i2c_hwdata imx21_i2c_hwdata = {
.ndivs = ARRAY_SIZE(imx_i2c_clk_div),
.i2sr_clr_opcode = I2SR_CLR_OPCODE_W0C,
.i2cr_ien_opcode = I2CR_IEN_OPCODE_1,
+ .has_dma_support = false,
};
@@ -213,6 +238,7 @@ static struct imx_i2c_hwdata vf610_i2c_hwdata = {
.ndivs = ARRAY_SIZE(vf610_i2c_clk_div),
.i2sr_clr_opcode = I2SR_CLR_OPCODE_W1C,
.i2cr_ien_opcode = I2CR_IEN_OPCODE_0,
+ .has_dma_support = true,
};
@@ -254,6 +280,155 @@ static inline unsigned char imx_i2c_read_reg(struct imx_i2c_struct *i2c_imx,
return readb(i2c_imx->base + (reg << i2c_imx->hwdata->regshift));
}
+/** Functions for DMA support ************************************************
+******************************************************************************/
+static int i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx, u32 phy_addr)
+{
+ struct imx_i2c_dma *dma = i2c_imx->dma;
+ struct dma_slave_config dma_sconfig;
+ int ret;
+
+ dma->chan_tx = dma_request_slave_channel(&i2c_imx->adapter.dev, "tx");
+ if (!dma->chan_tx) {
+ dev_err(&i2c_imx->adapter.dev,
+ "Dma tx channel request failed!\n");
+ return -ENODEV;
+ }
+
+ dma_sconfig.dst_addr = (dma_addr_t)phy_addr +
+ (IMX_I2C_I2DR << i2c_imx->hwdata->regshift);
+ dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_sconfig.dst_maxburst = 1;
+ dma_sconfig.direction = DMA_MEM_TO_DEV;
+ ret = dmaengine_slave_config(dma->chan_tx, &dma_sconfig);
+ if (ret < 0) {
+ dev_err(&i2c_imx->adapter.dev,
+ "Dma slave config failed, err = %d\n", ret);
+ dma_release_channel(dma->chan_tx);
+ return ret;
+ }
+
+ dma->chan_rx = dma_request_slave_channel(&i2c_imx->adapter.dev, "rx");
+ if (!dma->chan_rx) {
+ dev_err(&i2c_imx->adapter.dev,
+ "Dma rx channel request failed!\n");
+ return -ENODEV;
+ }
+
+ dma_sconfig.src_addr = (dma_addr_t)phy_addr +
+ (IMX_I2C_I2DR << i2c_imx->hwdata->regshift);
+ dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_sconfig.src_maxburst = 1;
+ dma_sconfig.direction = DMA_DEV_TO_MEM;
+ ret = dmaengine_slave_config(dma->chan_rx, &dma_sconfig);
+ if (ret < 0) {
+ dev_err(&i2c_imx->adapter.dev,
+ "Dma slave config failed, err = %d\n", ret);
+ dma_release_channel(dma->chan_rx);
+ return ret;
+ }
+
+ init_completion(&dma->cmd_complete);
+
+ return 0;
+}
+
+static void i2c_imx_dma_tx_callback(void *arg)
+{
+ struct imx_i2c_struct *i2c_imx = (struct imx_i2c_struct *)arg;
+ struct imx_i2c_dma *dma = i2c_imx->dma;
+
+ dma_unmap_single(dma->chan_tx->device->dev, dma->buf_tx,
+ dma->len_tx, DMA_TO_DEVICE);
+ complete(&dma->cmd_complete);
+}
+
+static int i2c_imx_dma_tx(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
+{
+ struct imx_i2c_dma *dma = i2c_imx->dma;
+ struct dma_async_tx_descriptor *txdesc;
+
+ dma->len_tx = msgs->len-1;
+ dma->buf_tx = dma_map_single(dma->chan_tx->device->dev, msgs->buf,
+ dma->len_tx, DMA_TO_DEVICE);
+ if (dma_mapping_error(dma->chan_tx->device->dev, dma->buf_tx)) {
+ dev_err(&i2c_imx->adapter.dev, "dma_map_single tx failed\n");
+ return -EINVAL;
+ }
+
+ txdesc = dmaengine_prep_slave_single(dma->chan_tx, dma->buf_tx,
+ dma->len_tx, DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!txdesc) {
+ dev_err(&i2c_imx->adapter.dev,
+ "Not able to get desc for tx\n");
+ return -EINVAL;
+ }
+
+ txdesc->callback = i2c_imx_dma_tx_callback;
+ txdesc->callback_param = i2c_imx;
+ dmaengine_submit(txdesc);
+ dma_async_issue_pending(dma->chan_tx);
+
+ return 0;
+}
+
+static void i2c_imx_dma_rx_callback(void *arg)
+{
+ struct imx_i2c_struct *i2c_imx = (struct imx_i2c_struct *)arg;
+ struct imx_i2c_dma *dma = i2c_imx->dma;
+
+ dma_unmap_single(dma->chan_rx->device->dev, dma->buf_rx,
+ dma->len_rx, DMA_FROM_DEVICE);
+ complete(&dma->cmd_complete);
+}
+
+static int i2c_imx_dma_rx(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
+{
+ struct imx_i2c_dma *dma = i2c_imx->dma;
+ struct dma_async_tx_descriptor *txdesc;
+
+ dma->len_rx = msgs->len - 2;
+ dma->buf_rx = dma_map_single(dma->chan_rx->device->dev, msgs->buf,
+ dma->len_rx, DMA_FROM_DEVICE);
+ if (dma_mapping_error(dma->chan_rx->device->dev, dma->buf_rx)) {
+ dev_err(&i2c_imx->adapter.dev, "dma_map_single tx failed\n");
+ return -EINVAL;
+ }
+
+ txdesc = dmaengine_prep_slave_single(dma->chan_rx, dma->buf_rx,
+ dma->len_rx, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!txdesc) {
+ dev_err(&i2c_imx->adapter.dev,
+ "Not able to get desc for rx\n");
+ return -EINVAL;
+ }
+
+ txdesc->callback = i2c_imx_dma_rx_callback;
+ txdesc->callback_param = i2c_imx;
+ dmaengine_submit(txdesc);
+ dma_async_issue_pending(dma->chan_rx);
+
+ return 0;
+}
+static void i2c_imx_dma_free(struct imx_i2c_struct *i2c_imx)
+{
+ struct imx_i2c_dma *dma = i2c_imx->dma;
+ struct dma_chan *dma_chan;
+
+ dma_chan = dma->chan_tx;
+ dma->chan_tx = NULL;
+ dma->buf_tx = 0;
+ dma->len_tx = 0;
+ dma_release_channel(dma_chan);
+
+ dma_chan = dma->chan_rx;
+ dma->chan_tx = NULL;
+ dma->buf_rx = 0;
+ dma->len_rx = 0;
+ dma_release_channel(dma_chan);
+}
/** Functions for IMX I2C adapter driver ***************************************
*******************************************************************************/
@@ -425,7 +600,8 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
return IRQ_NONE;
}
-static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
+static int i2c_imx_pio_write(struct imx_i2c_struct *i2c_imx,
+ struct i2c_msg *msgs)
{
int i, result;
@@ -458,7 +634,56 @@ static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
return 0;
}
-static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
+static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx,
+ struct i2c_msg *msgs)
+{
+ int result, timeout=1000;
+ unsigned int temp = 0;
+
+ reinit_completion(&i2c_imx->dma->cmd_complete);
+ result = i2c_imx_dma_tx(i2c_imx, msgs);
+ if(result)
+ return result;
+
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp |= I2CR_DMAEN;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+
+ /* write slave address */
+ imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR);
+ result = wait_for_completion_interruptible_timeout(
+ &i2c_imx->dma->cmd_complete,
+ msecs_to_jiffies(1000));
+ if (result == 0)
+ return -ETIMEDOUT;
+
+ /* waiting for Transfer complete. */
+ while(timeout--) {
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
+ if (temp & 0x80)
+ break;
+ udelay(10);
+ }
+
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp &= ~I2CR_DMAEN;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+
+ /* write the last byte */
+ imx_i2c_write_reg(msgs->buf[msgs->len-1], i2c_imx, IMX_I2C_I2DR);
+ result = i2c_imx_trx_complete(i2c_imx);
+ if (result)
+ return result;
+
+ result = i2c_imx_acked(i2c_imx);
+ if (result)
+ return result;
+
+ return 0;
+}
+
+static int i2c_imx_pio_read(struct imx_i2c_struct *i2c_imx,
+ struct i2c_msg *msgs)
{
int i, result;
unsigned int temp;
@@ -518,6 +743,80 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
return 0;
}
+static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
+ struct i2c_msg *msgs)
+{
+ int result, timeout=1000;
+ unsigned int temp;
+
+ /* write slave address */
+ imx_i2c_write_reg((msgs->addr << 1) | 0x01, i2c_imx, IMX_I2C_I2DR);
+ result = i2c_imx_trx_complete(i2c_imx);
+ if (result)
+ return result;
+
+ result = i2c_imx_acked(i2c_imx);
+ if (result)
+ return result;
+
+ /* setup bus to read data */
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp &= ~I2CR_MTX;
+ if (msgs->len - 1)
+ temp &= ~I2CR_TXAK;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+ imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); /* dummy read */
+
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp |= I2CR_DMAEN;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+
+ reinit_completion(&i2c_imx->dma->cmd_complete);
+ result = i2c_imx_dma_rx(i2c_imx, msgs);
+ if(result)
+ return result;
+
+ result = wait_for_completion_interruptible_timeout(
+ &i2c_imx->dma->cmd_complete,
+ msecs_to_jiffies(1000));
+ if (result == 0)
+ return -ETIMEDOUT;
+
+ /* waiting for Transfer complete. */
+ while(timeout--) {
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
+ if (temp & 0x80)
+ break;
+ udelay(10);
+ }
+
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp &= ~I2CR_DMAEN;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+
+ /* read n-1 byte data */
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp |= I2CR_TXAK;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+
+ msgs->buf[msgs->len-2] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
+ /* read n byte data */
+ result = i2c_imx_trx_complete(i2c_imx);
+ if (result)
+ return result;
+
+ /* It must generate STOP before read I2DR to prevent
+ controller from generating another clock cycle */
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp &= ~(I2CR_MSTA | I2CR_MTX);
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+ i2c_imx_bus_busy(i2c_imx, 0);
+ i2c_imx->stopped = 1;
+ msgs->buf[msgs->len-1] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
+
+ return 0;
+}
+
static int i2c_imx_xfer(struct i2c_adapter *adapter,
struct i2c_msg *msgs, int num)
{
@@ -563,10 +862,18 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
(temp & I2SR_SRW ? 1 : 0), (temp & I2SR_IIF ? 1 : 0),
(temp & I2SR_RXAK ? 1 : 0));
#endif
- if (msgs[i].flags & I2C_M_RD)
- result = i2c_imx_read(i2c_imx, &msgs[i]);
- else
- result = i2c_imx_write(i2c_imx, &msgs[i]);
+ if(i2c_imx->use_dma && msgs[i].len >= IMX_I2C_DMA_THRESHOLD) {
+ if (msgs[i].flags & I2C_M_RD)
+ result = i2c_imx_dma_read(i2c_imx, &msgs[i]);
+ else
+ result = i2c_imx_dma_write(i2c_imx, &msgs[i]);
+ } else {
+ if (msgs[i].flags & I2C_M_RD)
+ result = i2c_imx_pio_read(i2c_imx, &msgs[i]);
+ else
+ result = i2c_imx_pio_write(i2c_imx, &msgs[i]);
+ }
+
if (result)
goto fail0;
}
@@ -601,6 +908,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
void __iomem *base;
int irq, ret;
u32 bitrate;
+ u32 phy_addr;
dev_dbg(&pdev->dev, "<%s>\n", __func__);
@@ -611,6 +919,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ phy_addr = res->start;
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
@@ -696,6 +1005,24 @@ static int i2c_imx_probe(struct platform_device *pdev)
i2c_imx->adapter.name);
dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n");
+ /* Init DMA config if support*/
+ if (i2c_imx->hwdata->has_dma_support) {
+ dev_info(&pdev->dev, "has_dma_support_begin.\n");
+ i2c_imx->dma = devm_kzalloc(&pdev->dev, sizeof(struct imx_i2c_dma),
+ GFP_KERNEL);
+ if (!i2c_imx->dma) {
+ dev_info(&pdev->dev, "can't allocate dma struct faild use dma.\n");
+ i2c_imx->use_dma = false;
+ }
+ else if (i2c_imx_dma_request(i2c_imx, phy_addr)) {
+ dev_info(&pdev->dev, "can't request dma chan, faild use dma.\n");
+ i2c_imx->use_dma = false;
+ }
+ else {
+ i2c_imx->use_dma = true;
+ }
+ }
+
return 0; /* Return OK */
}
@@ -707,6 +1034,9 @@ static int i2c_imx_remove(struct platform_device *pdev)
dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
i2c_del_adapter(&i2c_imx->adapter);
+ if (i2c_imx->use_dma)
+ i2c_imx_dma_free(i2c_imx);
+
/* setup chip registers to defaults */
imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IADR);
imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IFDR);
--
1.8.4
More information about the linux-arm-kernel
mailing list